18 files changed, 3 insertions, 249 deletions
diff --git a/keyboards/ramonimbao/aelith/config.h b/keyboards/ramonimbao/aelith/config.h
index 285a9b5e6a..fd455efe8b 100644
--- a/keyboards/ramonimbao/aelith/config.h
+++ b/keyboards/ramonimbao/aelith/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -42,9 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -56,27 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ramonimbao/aelith/info.json b/keyboards/ramonimbao/aelith/info.json
index 2df7a46399..dd6c2c30f1 100644
--- a/keyboards/ramonimbao/aelith/info.json
+++ b/keyboards/ramonimbao/aelith/info.json
@@ -8,6 +8,7 @@
         "pid": "0xE460",
         "device_version": "0.1.2"
     },
+    "community_layouts": ["alice", "alice_split_bs"],
     "layouts": {
         "LAYOUT_alice_split_bs": {
             "layout": [
diff --git a/keyboards/ramonimbao/aelith/rules.mk b/keyboards/ramonimbao/aelith/rules.mk
index 7a3f004b10..fe2be33f82 100644
--- a/keyboards/ramonimbao/aelith/rules.mk
+++ b/keyboards/ramonimbao/aelith/rules.mk
@@ -19,5 +19,3 @@ NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = alice alice_split_bs
diff --git a/keyboards/ramonimbao/chevron/config.h b/keyboards/ramonimbao/chevron/config.h
index 3be1c4bf03..33be16ef17 100644
--- a/keyboards/ramonimbao/chevron/config.h
+++ b/keyboards/ramonimbao/chevron/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -39,10 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -62,9 +57,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -77,27 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ramonimbao/herringbone/pro/config.h b/keyboards/ramonimbao/herringbone/pro/config.h
index 298f8cff56..903dcdb0d5 100644
--- a/keyboards/ramonimbao/herringbone/pro/config.h
+++ b/keyboards/ramonimbao/herringbone/pro/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 7
@@ -46,9 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -64,27 +60,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ramonimbao/herringbone/v1/config.h b/keyboards/ramonimbao/herringbone/v1/config.h
index 7e07c6a3c5..dc68cbb9ce 100644
--- a/keyboards/ramonimbao/herringbone/v1/config.h
+++ b/keyboards/ramonimbao/herringbone/v1/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -39,10 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -62,9 +57,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -80,27 +72,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ramonimbao/mona/v1/config.h b/keyboards/ramonimbao/mona/v1/config.h
index bbe396b2f8..6e2ce27e70 100644
--- a/keyboards/ramonimbao/mona/v1/config.h
+++ b/keyboards/ramonimbao/mona/v1/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -42,9 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/ramonimbao/mona/v1_1/config.h b/keyboards/ramonimbao/mona/v1_1/config.h
index ff99b86a06..4007f95089 100644
--- a/keyboards/ramonimbao/mona/v1_1/config.h
+++ b/keyboards/ramonimbao/mona/v1_1/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -44,6 +43,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
diff --git a/keyboards/ramonimbao/mona/v1_1/readme.md b/keyboards/ramonimbao/mona/v1_1/readme.md
index 17ae6012bd..b28fedd76c 100644
--- a/keyboards/ramonimbao/mona/v1_1/readme.md
+++ b/keyboards/ramonimbao/mona/v1_1/readme.md
@@ -7,7 +7,7 @@ A gummy-worm o-ring mount 60% marble keyboard. Now with ALPS/MX, Caps Lock LED,
 * Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao)
 * Hardware Supported: ATmega32u4
 
-To get to the bootloader, with the USB cable plugged in, press the `QK_BOOT` button on the back of the PCB.
+To get to the bootloader, with the USB cable plugged in, press the `RESET` button on the back of the PCB.
 
 Make example for this keyboard (after setting up your build environment):
 
diff --git a/keyboards/ramonimbao/mona/v32a/config.h b/keyboards/ramonimbao/mona/v32a/config.h
index dce6c80d1f..de31920083 100644
--- a/keyboards/ramonimbao/mona/v32a/config.h
+++ b/keyboards/ramonimbao/mona/v32a/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -44,6 +43,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
diff --git a/keyboards/ramonimbao/mona/v32a/readme.md b/keyboards/ramonimbao/mona/v32a/readme.md
index f9a730691f..61a3deefaa 100644
--- a/keyboards/ramonimbao/mona/v32a/readme.md
+++ b/keyboards/ramonimbao/mona/v32a/readme.md
@@ -7,7 +7,7 @@ A gummy-worm o-ring mount 60% marble keyboard. Now with ALPS/MX, Caps Lock LED,
 * Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao)
 * Hardware Supported: ATmega32A
 
-To get to the bootloader, with the USB cable plugged in, press the `QK_BOOT` button on the back of the PCB.
+To get to the bootloader, with the USB cable plugged in, press the `RESET` button on the back of the PCB.
 
 Make example for this keyboard (after setting up your build environment):
 
diff --git a/keyboards/ramonimbao/squishy65/config.h b/keyboards/ramonimbao/squishy65/config.h
index 8282988950..3f67a3a382 100644
--- a/keyboards/ramonimbao/squishy65/config.h
+++ b/keyboards/ramonimbao/squishy65/config.h
@@ -39,10 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
 
diff --git a/keyboards/ramonimbao/squishyfrl/config.h b/keyboards/ramonimbao/squishyfrl/config.h
index f850964129..b5bc601b89 100644
--- a/keyboards/ramonimbao/squishyfrl/config.h
+++ b/keyboards/ramonimbao/squishyfrl/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 9
@@ -51,10 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN C15
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 16
@@ -83,9 +78,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -97,27 +89,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ramonimbao/squishytkl/config.h b/keyboards/ramonimbao/squishytkl/config.h
index f7d99f73b7..6eb103aa50 100644
--- a/keyboards/ramonimbao/squishytkl/config.h
+++ b/keyboards/ramonimbao/squishytkl/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 14
@@ -51,10 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN C15
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 16
@@ -84,9 +79,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -98,27 +90,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ramonimbao/tkl_ff/config.h b/keyboards/ramonimbao/tkl_ff/config.h
index f87953f7f0..87dd787da7 100644
--- a/keyboards/ramonimbao/tkl_ff/config.h
+++ b/keyboards/ramonimbao/tkl_ff/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -50,10 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 //#define RGB_DI_PIN E2
 //#ifdef RGB_DI_PIN
 //#    define RGBLED_NUM 16
@@ -73,9 +68,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -87,27 +79,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/ramonimbao/tkl_ff/v2/config.h b/keyboards/ramonimbao/tkl_ff/v2/config.h
index 35ceb61590..eb60e5c311 100644
--- a/keyboards/ramonimbao/tkl_ff/v2/config.h
+++ b/keyboards/ramonimbao/tkl_ff/v2/config.h
@@ -15,7 +15,6 @@
  */
 #pragma once
 
-#include "config_common.h"
 
 #define RGBLIGHT_LAYERS
 #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
diff --git a/keyboards/ramonimbao/wete/v1/config.h b/keyboards/ramonimbao/wete/v1/config.h
index d6f112233e..e2f2c76938 100644
--- a/keyboards/ramonimbao/wete/v1/config.h
+++ b/keyboards/ramonimbao/wete/v1/config.h
@@ -50,10 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define SLEEP_LED_GPT_DRIVER GPTD1
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
 
diff --git a/keyboards/ramonimbao/wete/v2/config.h b/keyboards/ramonimbao/wete/v2/config.h
index b112924495..21280c2688 100644
--- a/keyboards/ramonimbao/wete/v2/config.h
+++ b/keyboards/ramonimbao/wete/v2/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 13
@@ -54,10 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGBLIGHT_LAYERS
 #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
 
@@ -89,9 +84,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -103,27 +95,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */