3 files changed, 3 insertions, 48 deletions
diff --git a/keyboards/pteron36/config.h b/keyboards/pteron36/config.h
index 1ff309561f..d10fb93a98 100644
--- a/keyboards/pteron36/config.h
+++ b/keyboards/pteron36/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8
@@ -50,10 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 //#define RGB_DI_PIN E2
 //#ifdef RGB_DI_PIN
 //#    define RGBLED_NUM 16
@@ -70,43 +65,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 //#endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -123,9 +86,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
 // for via
 #define DYNAMIC_KEYMAP_LAYER_COUNT 7
 
diff --git a/keyboards/pteron36/info.json b/keyboards/pteron36/info.json
index e5323631ee..1fab1f8486 100644
--- a/keyboards/pteron36/info.json
+++ b/keyboards/pteron36/info.json
@@ -8,6 +8,9 @@
         "pid": "0x5054",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
+    "community_layouts": ["split_3x5_3"],
     "layouts": {
         "LAYOUT_split_3x5_3": {
             "layout": [
diff --git a/keyboards/pteron36/rules.mk b/keyboards/pteron36/rules.mk
index 803fa4dcca..d07878747e 100644
--- a/keyboards/pteron36/rules.mk
+++ b/keyboards/pteron36/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
@@ -19,5 +13,3 @@ AUDIO_ENABLE = no           # Audio output
 OLED_ENABLE = yes           # OLED display
 ENCODER_ENABLE = yes        # Encoder support
 SPLIT_KEYBOARD = yes        # Split enable
-
-LAYOUTS = split_3x5_3