12 files changed, 9 insertions, 150 deletions
diff --git a/keyboards/projectcain/relic/config.h b/keyboards/projectcain/relic/config.h
index aa40dad9a5..ca023cf352 100644
--- a/keyboards/projectcain/relic/config.h
+++ b/keyboards/projectcain/relic/config.h
@@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ENCODERS_PAD_A { D4 }
 #define ENCODERS_PAD_B { D6 }
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -57,43 +56,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 // #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -109,7 +76,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/projectcain/relic/info.json b/keyboards/projectcain/relic/info.json
index 2b4041a261..5c07c8e106 100644
--- a/keyboards/projectcain/relic/info.json
+++ b/keyboards/projectcain/relic/info.json
@@ -8,6 +8,8 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"BACK <BR> SPACE", "x":11, "y":0}, {"label":"A", "x":0, "y":1, "w":1.25}, {"label":"S", "x":1.25, "y":1}, {"label":"D", "x":2.25, "y":1}, {"label":"F", "x":3.25, "y":1}, {"label":"G", "x":4.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":";", "x":10.25, "y":1, "w":1.75}, {"label":"Z", "x":0, "y":2, "w":1.75}, {"label":"X", "x":1.75, "y":2}, {"label":"C", "x":2.75, "y":2}, {"label":"V", "x":3.75, "y":2}, {"label":"B", "x":4.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"/", "x":10.75, "y":2, "w":1.25}, {"label":"Ctrl", "x":0.25, "y":3, "w":1.25}, {"label":"Alt", "x":1.5, "y":3, "w":1.25}, {"label":"MO(1)", "x":9.25, "y":3, "w":1.25}, {"label":"MO(2)", "x":10.5, "y":3, "w":1.25}, {"label":"LGUI", "x":3, "y":3.25}, {"label":"BACK <BR> SPACE", "x":4, "y":3.25, "w":1.5}, {"label":"Space", "x":5.5, "y":3.25}, {"label":"Space", "x":6.5, "y":3.25, "w":1.5}, {"label":"RGUI", "x":8, "y":3.25}]
diff --git a/keyboards/projectcain/relic/keymaps/default/config.h b/keyboards/projectcain/relic/keymaps/default/config.h
index 7756a8db2f..ebe839c4c4 100644
--- a/keyboards/projectcain/relic/keymaps/default/config.h
+++ b/keyboards/projectcain/relic/keymaps/default/config.h
@@ -19,5 +19,5 @@
 #define ENCODER_RESOLUTION 2
 #define COMBO_COUNT 6
 #define COMBO_TERM 50
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
 #define DISABLE_LEADER
diff --git a/keyboards/projectcain/relic/rules.mk b/keyboards/projectcain/relic/rules.mk
index 717cc07b4b..c58df49ea8 100644
--- a/keyboards/projectcain/relic/rules.mk
+++ b/keyboards/projectcain/relic/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/projectcain/vault35/config.h b/keyboards/projectcain/vault35/config.h
index b609d84837..9cf7024f39 100644
--- a/keyboards/projectcain/vault35/config.h
+++ b/keyboards/projectcain/vault35/config.h
@@ -14,7 +14,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -40,21 +39,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ENCODERS_PAD_B { D7 }
 #define ENCODER_RESOLUTION 2
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
 //#define LED_NUM_LOCK_PIN B0
 //#define LED_CAPS_LOCK_PIN B1
 //#define LED_SCROLL_LOCK_PIN B2
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 //#define RGB_DI_PIN E2
 //#ifdef RGB_DI_PIN
 //#    define RGBLED_NUM 16
@@ -71,43 +61,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 //#endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -123,7 +81,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/projectcain/vault35/info.json b/keyboards/projectcain/vault35/info.json
index 4b81c2ef76..467c8293e8 100644
--- a/keyboards/projectcain/vault35/info.json
+++ b/keyboards/projectcain/vault35/info.json
@@ -8,6 +8,8 @@
       "pid": "0x6060",
       "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
     "LAYOUT_split_4space": {
    "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":5, "y":0}, {"label":"U", "x":6, "y":0}, {"label":"I", "x":7, "y":0}, {"label":"O", "x":8, "y":0}, {"label":"P", "x":9, "y":0}, {"label":"BACK<br>SPACE", "x":10, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"S", "x":1.25, "y":1}, {"label":"D", "x":2.25, "y":1}, {"label":"F", "x":3.25, "y":1}, {"label":"G", "x":4.25, "y":1}, {"label":"H", "x":5.25, "y":1}, {"label":"J", "x":6.25, "y":1}, {"label":"K", "x":7.25, "y":1}, {"label":"L", "x":8.25, "y":1}, {"label":"ENTER", "x":9.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"X", "x":1.75, "y":2}, {"label":"C", "x":2.75, "y":2}, {"label":"V", "x":3.75, "y":2}, {"label":"B", "x":4.75, "y":2}, {"label":"N", "x":5.75, "y":2}, {"label":"M", "x":6.75, "y":2}, {"label":"<", "x":7.75, "y":2}, {"label":">", "x":8.75, "y":2}, {"label":"SHIFT", "x":9.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.5, "y":3}, {"label":"LOWER", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1.75}, {"label":"RAISE", "x":7.25, "y":3, "w":1.25}, {"label":"ALT", "x":8.5, "y":3}]
diff --git a/keyboards/projectcain/vault35/keymaps/default/config.h b/keyboards/projectcain/vault35/keymaps/default/config.h
index 3022aa84c4..885d5ad9cb 100644
--- a/keyboards/projectcain/vault35/keymaps/default/config.h
+++ b/keyboards/projectcain/vault35/keymaps/default/config.h
@@ -18,4 +18,4 @@
 
 #define COMBO_COUNT 2
 #define COMBO_TERM 50
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
diff --git a/keyboards/projectcain/vault35/rules.mk b/keyboards/projectcain/vault35/rules.mk
index 77d9fdb410..b03b6fa905 100644
--- a/keyboards/projectcain/vault35/rules.mk
+++ b/keyboards/projectcain/vault35/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/projectcain/vault45/config.h b/keyboards/projectcain/vault45/config.h
index 2fa67320f5..d9d2799d0d 100644
--- a/keyboards/projectcain/vault45/config.h
+++ b/keyboards/projectcain/vault45/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -43,21 +42,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ENCODERS_PAD_B { B2, D2 }
 #define ENCODER_RESOLUTION 2
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
 //#define LED_NUM_LOCK_PIN B0
 //#define LED_CAPS_LOCK_PIN B1
 //#define LED_SCROLL_LOCK_PIN B2
 //#define LED_COMPOSE_PIN B3
 //#define LED_KANA_PIN B4
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 //#define RGB_DI_PIN E2
 //#ifdef RGB_DI_PIN
 //#    define RGBLED_NUM 16
@@ -74,43 +64,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 //#endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -126,7 +84,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/projectcain/vault45/info.json b/keyboards/projectcain/vault45/info.json
index 9e3ebcb02e..a8a4dcba8e 100644
--- a/keyboards/projectcain/vault45/info.json
+++ b/keyboards/projectcain/vault45/info.json
@@ -8,6 +8,8 @@
       "pid": "0x6060",
       "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layout_aliases": {
         "LAYOUT": "LAYOUT_all"
     },
diff --git a/keyboards/projectcain/vault45/keymaps/default/config.h b/keyboards/projectcain/vault45/keymaps/default/config.h
index 2ca1e8f123..4a98bb89d4 100644
--- a/keyboards/projectcain/vault45/keymaps/default/config.h
+++ b/keyboards/projectcain/vault45/keymaps/default/config.h
@@ -18,4 +18,4 @@
 
 #define COMBO_COUNT 2
 #define COMBO_TERM 50
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
diff --git a/keyboards/projectcain/vault45/rules.mk b/keyboards/projectcain/vault45/rules.mk
index 77d9fdb410..b03b6fa905 100644
--- a/keyboards/projectcain/vault45/rules.mk
+++ b/keyboards/projectcain/vault45/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #