5 files changed, 11 insertions, 44 deletions
diff --git a/keyboards/planck/rev6_drop/config.h b/keyboards/planck/rev6_drop/config.h
index 35b3a55c1f..bd78de6257 100644
--- a/keyboards/planck/rev6_drop/config.h
+++ b/keyboards/planck/rev6_drop/config.h
@@ -17,12 +17,6 @@
 
 #pragma once
 
-#undef MATRIX_ROWS
-#undef MATRIX_COLS
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 6
-
 /*
  * Keyboard Matrix Assignments
  *
@@ -58,35 +52,6 @@
 #define AUDIO_PIN_ALT A4
 #define AUDIO_PIN_ALT_AS_NEGATIVE
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-// #define DEBOUNCE 6
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/planck/rev6_drop/info.json b/keyboards/planck/rev6_drop/info.json
index cd8a932139..f2a3db5082 100644
--- a/keyboards/planck/rev6_drop/info.json
+++ b/keyboards/planck/rev6_drop/info.json
@@ -8,6 +8,9 @@
     "pid": "0xA4F9",
     "device_version": "0.0.6"
   },
+  "processor": "STM32F303",
+  "bootloader": "stm32-dfu",
+  "community_layouts": ["ortho_4x12", "planck_mit"],
   "layouts": {
     "LAYOUT_ortho_4x12": {
       "layout": [
diff --git a/keyboards/planck/rev6_drop/matrix.c b/keyboards/planck/rev6_drop/matrix.c
index d10d94dcf8..6f7d6725a1 100644
--- a/keyboards/planck/rev6_drop/matrix.c
+++ b/keyboards/planck/rev6_drop/matrix.c
@@ -17,6 +17,10 @@
 
 #include "quantum.h"
 
+#ifndef DEBOUNCE
+#    define DEBOUNCE 5
+#endif
+
 /*
  *     col: { B11, B10, B2, B1, A7, B0 }
  *     row: { A10, A9, A8, B15, C13, C14, C15, A2 }
@@ -63,7 +67,7 @@ void matrix_init(void) {
     memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
     memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
 
-    matrix_init_quantum();
+    matrix_init_kb();
 }
 
 uint8_t matrix_scan(void) {
@@ -138,7 +142,7 @@ uint8_t matrix_scan(void) {
         debouncing = false;
     }
 
-    matrix_scan_quantum();
+    matrix_scan_kb();
 
     return 1;
 }
diff --git a/keyboards/planck/rev6_drop/mcuconf.h b/keyboards/planck/rev6_drop/mcuconf.h
index 20337afbb2..2837fb34ff 100644
--- a/keyboards/planck/rev6_drop/mcuconf.h
+++ b/keyboards/planck/rev6_drop/mcuconf.h
@@ -14,6 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#pragma once
+
 #include_next <mcuconf.h>
 
 // The SysTick timer from the normal quantum/stm32 uses TIM2 -- the WS2812 pin used
diff --git a/keyboards/planck/rev6_drop/rules.mk b/keyboards/planck/rev6_drop/rules.mk
index 30466fbd27..5fdf117649 100644
--- a/keyboards/planck/rev6_drop/rules.mk
+++ b/keyboards/planck/rev6_drop/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F303
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -26,5 +20,4 @@ DIP_SWITCH_ENABLE = yes
 
 SRC += matrix.c
 
-LAYOUTS = ortho_4x12 planck_mit
 LAYOUTS_HAS_RGB = no