11 files changed, 9 insertions, 117 deletions
diff --git a/keyboards/pinky/3/config.h b/keyboards/pinky/3/config.h
index f6b8dc4343..70941bfc6c 100644
--- a/keyboards/pinky/3/config.h
+++ b/keyboards/pinky/3/config.h
@@ -45,45 +45,6 @@
  */
 #define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -99,7 +60,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/pinky/3/info.json b/keyboards/pinky/3/info.json
index 0fb7e5a6f6..b691a1602a 100644
--- a/keyboards/pinky/3/info.json
+++ b/keyboards/pinky/3/info.json
@@ -8,6 +8,8 @@
         "pid": "0x7033",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT_split_3x7_4": {
             "layout": [
diff --git a/keyboards/pinky/3/keymaps/default/config.h b/keyboards/pinky/3/keymaps/default/config.h
index 63e8168b47..3671c13a38 100644
--- a/keyboards/pinky/3/keymaps/default/config.h
+++ b/keyboards/pinky/3/keymaps/default/config.h
@@ -24,6 +24,6 @@
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
 #define TAPPING_TERM 200
 #define RETRO_TAPPPING
diff --git a/keyboards/pinky/3/keymaps/ninjonas/config.h b/keyboards/pinky/3/keymaps/ninjonas/config.h
index 63e8168b47..3671c13a38 100644
--- a/keyboards/pinky/3/keymaps/ninjonas/config.h
+++ b/keyboards/pinky/3/keymaps/ninjonas/config.h
@@ -24,6 +24,6 @@
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
 #define TAPPING_TERM 200
 #define RETRO_TAPPPING
diff --git a/keyboards/pinky/3/keymaps/via/config.h b/keyboards/pinky/3/keymaps/via/config.h
index 63e8168b47..3671c13a38 100644
--- a/keyboards/pinky/3/keymaps/via/config.h
+++ b/keyboards/pinky/3/keymaps/via/config.h
@@ -24,6 +24,6 @@
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
 #define TAPPING_TERM 200
 #define RETRO_TAPPPING
diff --git a/keyboards/pinky/4/config.h b/keyboards/pinky/4/config.h
index c980f9d302..5a27d70449 100644
--- a/keyboards/pinky/4/config.h
+++ b/keyboards/pinky/4/config.h
@@ -45,45 +45,6 @@
  */
 #define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -99,7 +60,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/pinky/4/info.json b/keyboards/pinky/4/info.json
index 373861b138..a05ad52e53 100644
--- a/keyboards/pinky/4/info.json
+++ b/keyboards/pinky/4/info.json
@@ -8,6 +8,8 @@
         "pid": "0x7034",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT_split_4x7_4": {
             "layout": [
diff --git a/keyboards/pinky/4/keymaps/default/config.h b/keyboards/pinky/4/keymaps/default/config.h
index 63e8168b47..3671c13a38 100644
--- a/keyboards/pinky/4/keymaps/default/config.h
+++ b/keyboards/pinky/4/keymaps/default/config.h
@@ -24,6 +24,6 @@
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
 #define TAPPING_TERM 200
 #define RETRO_TAPPPING
diff --git a/keyboards/pinky/4/keymaps/via/config.h b/keyboards/pinky/4/keymaps/via/config.h
index 63e8168b47..3671c13a38 100644
--- a/keyboards/pinky/4/keymaps/via/config.h
+++ b/keyboards/pinky/4/keymaps/via/config.h
@@ -24,6 +24,6 @@
 // #define MASTER_RIGHT
 // #define EE_HANDS
 
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
 #define TAPPING_TERM 200
 #define RETRO_TAPPPING
diff --git a/keyboards/pinky/config.h b/keyboards/pinky/config.h
deleted file mode 100644
index 7f0c3c10ea..0000000000
--- a/keyboards/pinky/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
-Copyright 2018 'Masayuki Sunahara'
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
diff --git a/keyboards/pinky/rules.mk b/keyboards/pinky/rules.mk
index 2118d54a31..1b08086355 100644
--- a/keyboards/pinky/rules.mk
+++ b/keyboards/pinky/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #