diff options
Diffstat (limited to 'keyboards/percent/canoe')
| -rw-r--r-- | keyboards/percent/canoe/canoe.c | 58 | ||||
| -rw-r--r-- | keyboards/percent/canoe/canoe.h | 58 | ||||
| -rw-r--r-- | keyboards/percent/canoe/config.h | 46 | ||||
| -rw-r--r-- | keyboards/percent/canoe/info.json | 17 | ||||
| -rw-r--r-- | keyboards/percent/canoe/keymaps/boy_314/keymap.c | 56 | ||||
| -rw-r--r-- | keyboards/percent/canoe/keymaps/boy_314/readme.md | 5 | ||||
| -rw-r--r-- | keyboards/percent/canoe/keymaps/default/keymap.c | 40 | ||||
| -rw-r--r-- | keyboards/percent/canoe/keymaps/dhertz/keymap.c | 62 | ||||
| -rw-r--r-- | keyboards/percent/canoe/keymaps/iso/keymap.c | 29 | ||||
| -rw-r--r-- | keyboards/percent/canoe/matrix.c | 112 | ||||
| -rw-r--r-- | keyboards/percent/canoe/readme.md | 44 | ||||
| -rw-r--r-- | keyboards/percent/canoe/rules.mk | 30 | ||||
| -rw-r--r-- | keyboards/percent/canoe/usbconfig.h | 386 |
13 files changed, 943 insertions, 0 deletions
diff --git a/keyboards/percent/canoe/canoe.c b/keyboards/percent/canoe/canoe.c new file mode 100644 index 0000000000..e59b0dd7bc --- /dev/null +++ b/keyboards/percent/canoe/canoe.c @@ -0,0 +1,58 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "canoe.h" + +void matrix_init_kb(void) { matrix_init_user(); } + +__attribute__ ((weak)) +void matrix_init_user(void) {} + +void matrix_scan_kb(void) { matrix_scan_user(); } + +__attribute__ ((weak)) +void matrix_scan_user(void) {} + +#ifdef BACKLIGHT_ENABLE +void backlight_set(uint8_t level) { + if (level == 0) { + // Turn out the lights + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); + } else { + // Turn on the lights + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); + } +} + +void backlight_init_ports(void) { + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); +} +#endif diff --git a/keyboards/percent/canoe/canoe.h b/keyboards/percent/canoe/canoe.h new file mode 100644 index 0000000000..2f608598f8 --- /dev/null +++ b/keyboards/percent/canoe/canoe.h @@ -0,0 +1,58 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +#define _x_ KC_NO + +#define LAYOUT_iso( \ + K0D, K0C, K0B, K0A, K09, K08, K07, K06, K05, K04, K03, K02, K01, K00, K0E, \ + K1D, K1C, K1B, K1A, K19, K18, K17, K16, K15, K14, K13, K12, K11, K1E, \ + K2D, K2C, K2B, K2A, K29, K28, K27, K26, K25, K24, K23, K22, K10, K21, K2E, \ + K3D, K4A, K3C, K3B, K3A, K39, K38, K37, K36, K35, K34, K33, K32, K30, K3E, \ + K4D, K4C, K4B, K48, K44, K43, K42, K40, K4E \ +){ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { _x_, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, _x_, K42, K43, K44, _x_, _x_, _x_, K48, _x_, K4A, K4B, K4C, K4D, K4E }, \ + { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \ + { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \ + { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ } \ +} + +#define LAYOUT_65_ansi_blocker( \ + K0D, K0C, K0B, K0A, K09, K08, K07, K06, K05, K04, K03, K02, K01, K00, K0E, \ + K1D, K1C, K1B, K1A, K19, K18, K17, K16, K15, K14, K13, K12, K11, K10, K1E, \ + K2D, K2C, K2B, K2A, K29, K28, K27, K26, K25, K24, K23, K22, K21, K2E, \ + K3D, K3C, K3B, K3A, K39, K38, K37, K36, K35, K34, K33, K32, K30, K3E, \ + K4D, K4C, K4B, K48, K44, K43, K42, K40, K4E \ +){ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { _x_, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, _x_, K42, K43, K44, _x_, _x_, _x_, K48, _x_, _x_, K4B, K4C, K4D, K4E }, \ + { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \ + { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ }, \ + { _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_, _x_ } \ +} + +#define LAYOUT LAYOUT_65_ansi_blocker // added to not break existing checked in keymaps diff --git a/keyboards/percent/canoe/config.h b/keyboards/percent/canoe/config.h new file mode 100644 index 0000000000..bae6ed20fa --- /dev/null +++ b/keyboards/percent/canoe/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CANOE_CONFIG_H +#define CANOE_CONFIG_H + +#include "config_common.h" + +#define VENDOR_ID 0x20A0 +#define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 +#define MANUFACTURER NotActuallyPercent +#define PRODUCT CANOE + +#define RGBLED_NUM 2 + +#define MATRIX_ROWS 8 +#define MATRIX_COLS 15 + +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1 } +#define UNUSED_PINS + +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCE 5 + +#define BACKLIGHT_LEVELS 1 +#define RGBLIGHT_ANIMATIONS + +#define NO_UART 1 + +#endif diff --git a/keyboards/percent/canoe/info.json b/keyboards/percent/canoe/info.json new file mode 100644 index 0000000000..756cd1b37a --- /dev/null +++ b/keyboards/percent/canoe/info.json @@ -0,0 +1,17 @@ +{ + "keyboard_name": "Canoe", + "maintainer": "qmk", + "url": "", + "height": 6, + "width": 15, + "layouts": { + "LAYOUT_iso": { + "key_count": 68, + "layout": [{"label":"K0D", "x":0, "y":0}, {"label":"K0C", "x":1, "y":0}, {"label":"K0B", "x":2, "y":0}, {"label":"K0A", "x":3, "y":0}, {"label":"K09", "x":4, "y":0}, {"label":"K08", "x":5, "y":0}, {"label":"K07", "x":6, "y":0}, {"label":"K06", "x":7, "y":0}, {"label":"K05", "x":8, "y":0}, {"label":"K04", "x":9, "y":0}, {"label":"K03", "x":10, "y":0}, {"label":"K02", "x":11, "y":0}, {"label":"K01", "x":12, "y":0}, {"label":"K00", "x":13, "y":0, "w":2}, {"label":"K0E", "x":15, "y":0}, {"label":"K1D", "x":0, "y":1, "w":1.5}, {"label":"K1C", "x":1.5, "y":1}, {"label":"K1B", "x":2.5, "y":1}, {"label":"K1A", "x":3.5, "y":1}, {"label":"K19", "x":4.5, "y":1}, {"label":"K18", "x":5.5, "y":1}, {"label":"K17", "x":6.5, "y":1}, {"label":"K16", "x":7.5, "y":1}, {"label":"K15", "x":8.5, "y":1}, {"label":"K14", "x":9.5, "y":1}, {"label":"K13", "x":10.5, "y":1}, {"label":"K12", "x":11.5, "y":1}, {"label":"K11", "x":12.5, "y":1}, {"label":"K1E", "x":15, "y":1}, {"label":"K2D", "x":0, "y":2, "w":1.75}, {"label":"K2C", "x":1.75, "y":2}, {"label":"K2B", "x":2.75, "y":2}, {"label":"K2A", "x":3.75, "y":2}, {"label":"K29", "x":4.75, "y":2}, {"label":"K28", "x":5.75, "y":2}, {"label":"K27", "x":6.75, "y":2}, {"label":"K26", "x":7.75, "y":2}, {"label":"K25", "x":8.75, "y":2}, {"label":"K24", "x":9.75, "y":2}, {"label":"K23", "x":10.75, "y":2}, {"label":"K22", "x":11.75, "y":2}, {"label":"K10", "x":12.75, "y":2}, {"label":"K21", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"K2E", "x":15, "y":2}, {"label":"K3D", "x":0, "y":3, "w":1.25}, {"label":"K4A", "x":1.25, "y":3}, {"label":"K3C", "x":2.25, "y":3}, {"label":"K3B", "x":3.25, "y":3}, {"label":"K3A", "x":4.25, "y":3}, {"label":"K39", "x":5.25, "y":3}, {"label":"K38", "x":6.25, "y":3}, {"label":"K37", "x":7.25, "y":3}, {"label":"K36", "x":8.25, "y":3}, {"label":"K35", "x":9.25, "y":3}, {"label":"K34", "x":10.25, "y":3}, {"label":"K33", "x":11.25, "y":3}, {"label":"K32", "x":12.25, "y":3, "w":1.75}, {"label":"K30", "x":14, "y":3}, {"label":"K3E", "x":15, "y":3}, {"label":"K4D", "x":0, "y":4, "w":1.25}, {"label":"K4C", "x":1.25, "y":4, "w":1.25}, {"label":"K4B", "x":2.5, "y":4, "w":1.25}, {"label":"K48", "x":3.75, "y":4, "w":6.25}, {"label":"K44", "x":10, "y":4, "w":1.25}, {"label":"K43", "x":11.25, "y":4, "w":1.25}, {"label":"K42", "x":13, "y":4}, {"label":"K40", "x":14, "y":4}, {"label":"K4E", "x":15, "y":4}] + }, + "LAYOUT_65_ansi_blocker": { + "key_count": 67, + "layout": [{"label":"K0D", "x":0, "y":0}, {"label":"K0C", "x":1, "y":0}, {"label":"K0B", "x":2, "y":0}, {"label":"K0A", "x":3, "y":0}, {"label":"K09", "x":4, "y":0}, {"label":"K08", "x":5, "y":0}, {"label":"K07", "x":6, "y":0}, {"label":"K06", "x":7, "y":0}, {"label":"K05", "x":8, "y":0}, {"label":"K04", "x":9, "y":0}, {"label":"K03", "x":10, "y":0}, {"label":"K02", "x":11, "y":0}, {"label":"K01", "x":12, "y":0}, {"label":"K00", "x":13, "y":0, "w":2}, {"label":"K0E", "x":15, "y":0}, {"label":"K1D", "x":0, "y":1, "w":1.5}, {"label":"K1C", "x":1.5, "y":1}, {"label":"K1B", "x":2.5, "y":1}, {"label":"K1A", "x":3.5, "y":1}, {"label":"K19", "x":4.5, "y":1}, {"label":"K18", "x":5.5, "y":1}, {"label":"K17", "x":6.5, "y":1}, {"label":"K16", "x":7.5, "y":1}, {"label":"K15", "x":8.5, "y":1}, {"label":"K14", "x":9.5, "y":1}, {"label":"K13", "x":10.5, "y":1}, {"label":"K12", "x":11.5, "y":1}, {"label":"K11", "x":12.5, "y":1}, {"label":"K10", "x":13.5, "y":1, "w":1.5}, {"label":"K1E", "x":15, "y":1}, {"label":"K2D", "x":0, "y":2, "w":1.75}, {"label":"K2C", "x":1.75, "y":2}, {"label":"K2B", "x":2.75, "y":2}, {"label":"K2A", "x":3.75, "y":2}, {"label":"K29", "x":4.75, "y":2}, {"label":"K28", "x":5.75, "y":2}, {"label":"K27", "x":6.75, "y":2}, {"label":"K26", "x":7.75, "y":2}, {"label":"K25", "x":8.75, "y":2}, {"label":"K24", "x":9.75, "y":2}, {"label":"K23", "x":10.75, "y":2}, {"label":"K22", "x":11.75, "y":2}, {"label":"K21", "x":12.75, "y":2, "w":2.25}, {"label":"K2E", "x":15, "y":2}, {"label":"K3D", "x":0, "y":3, "w":2.25}, {"label":"K3C", "x":2.25, "y":3}, {"label":"K3B", "x":3.25, "y":3}, {"label":"K3A", "x":4.25, "y":3}, {"label":"K39", "x":5.25, "y":3}, {"label":"K38", "x":6.25, "y":3}, {"label":"K37", "x":7.25, "y":3}, {"label":"K36", "x":8.25, "y":3}, {"label":"K35", "x":9.25, "y":3}, {"label":"K34", "x":10.25, "y":3}, {"label":"K33", "x":11.25, "y":3}, {"label":"K32", "x":12.25, "y":3, "w":1.75}, {"label":"K30", "x":14, "y":3}, {"label":"K3E", "x":15, "y":3}, {"label":"K4D", "x":0, "y":4, "w":1.25}, {"label":"K4C", "x":1.25, "y":4, "w":1.25}, {"label":"K4B", "x":2.5, "y":4, "w":1.25}, {"label":"K48", "x":3.75, "y":4, "w":6.25}, {"label":"K44", "x":10, "y":4, "w":1.25}, {"label":"K43", "x":11.25, "y":4, "w":1.25}, {"label":"K42", "x":13, "y":4}, {"label":"K40", "x":14, "y":4}, {"label":"K4E", "x":15, "y":4}] + } + } +} diff --git a/keyboards/percent/canoe/keymaps/boy_314/keymap.c b/keyboards/percent/canoe/keymaps/boy_314/keymap.c new file mode 100644 index 0000000000..e3b4c88d28 --- /dev/null +++ b/keyboards/percent/canoe/keymaps/boy_314/keymap.c @@ -0,0 +1,56 @@ +/* +Copyright 2019 Boy_314 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +#define _BL 0 +#define _F1 1 +#define _F2 2 + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BL] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_PGUP, \ + CTL_T(KC_CAPS), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_PGDN, \ + KC_LSPO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC, KC_UP, MO(_F2), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_F1), KC_LEFT, KC_DOWN, KC_RIGHT), + + [_F1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, \ + KC_TRNS, KC_NO, KC_UP, KC_NO, RGB_TOG,RGB_VAI,RGB_HUI,RGB_SAI,KC_INS, RESET, KC_PSCR, KC_TRNS, KC_PAUS, KC_BSLS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,RGB_MOD,RGB_VAD,RGB_HUD,RGB_SAD,KC_NO, KC_NO, KC_F14, KC_F15, KC_INS, KC_HOME, \ + KC_LSPO, KC_MPRV, KC_MPLY, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_MUTE,KC_VOLD, KC_VOLU, KC_NO, KC_RSPC, KC_VOLU, KC_TRNS, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_MPLY, KC_VOLD, KC_MNXT), + + [_F2] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PAUS, \ + KC_TRNS, KC_NO, KC_UP, KC_NO, RGB_TOG,RGB_VAI,RGB_HUI,RGB_SAI,KC_INS, RESET, KC_PSCR, KC_SLCK, KC_PAUS, KC_BSLS, KC_SLCK, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,RGB_MOD,RGB_VAD,RGB_HUD,RGB_SAD,KC_NO, KC_NO, KC_F14, KC_F15, KC_INS, KC_HOME, \ + KC_LSPO, KC_MPRV, KC_MPLY, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_MUTE,KC_VOLD, KC_VOLU, KC_NO, KC_RSPC, KC_PGUP, KC_TRNS, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_HOME, KC_PGDOWN,KC_END) + +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + rgblight_sethsv(HSV_RED); + } else { + rgblight_sethsv(HSV_TURQUOISE); + } +}
\ No newline at end of file diff --git a/keyboards/percent/canoe/keymaps/boy_314/readme.md b/keyboards/percent/canoe/keymaps/boy_314/readme.md new file mode 100644 index 0000000000..3db01a66d0 --- /dev/null +++ b/keyboards/percent/canoe/keymaps/boy_314/readme.md @@ -0,0 +1,5 @@ +# Boy_314's Canoe Layout + +Currently only supports Dvorak. Top right LED turns red when caps lock is on. + +Fn+O (Fn+R in Dvorak) puts the board into bootloader mode.
\ No newline at end of file diff --git a/keyboards/percent/canoe/keymaps/default/keymap.c b/keyboards/percent/canoe/keymaps/default/keymap.c new file mode 100644 index 0000000000..fc67308476 --- /dev/null +++ b/keyboards/percent/canoe/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +#define _BL 0 +#define _FL 1 + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BL] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_LEFT, KC_DOWN, KC_RIGHT), + + [_FL] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PAUS, \ + KC_TRNS, KC_NO, KC_UP, KC_NO, RGB_TOG,RGB_VAI,RGB_HUI,RGB_SAI,KC_INS, RESET, KC_PSCR, KC_SLCK, KC_PAUS, KC_BSLS, KC_SLCK, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,RGB_MOD,RGB_VAD,RGB_HUD,RGB_SAD,KC_NO, KC_NO, KC_F14, KC_F15, KC_INS, KC_HOME, \ + KC_LSFT, KC_MPRV, KC_MPLY, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_MUTE,KC_VOLD, KC_VOLU, KC_NO, KC_RSFT, KC_PGUP, KC_END, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_HOME, KC_PGDOWN,KC_END) + +}; diff --git a/keyboards/percent/canoe/keymaps/dhertz/keymap.c b/keyboards/percent/canoe/keymaps/dhertz/keymap.c new file mode 100644 index 0000000000..bc8a4bca20 --- /dev/null +++ b/keyboards/percent/canoe/keymaps/dhertz/keymap.c @@ -0,0 +1,62 @@ +#include QMK_KEYBOARD_H +#include "dhertz.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,---------------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp|Del| + * |---------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Enter|Hom| + * |------------------------------------------------------` |---| + * |SrCtl | A| S| D| F| G| H| J| K| L| ;| '| \| |End| + * |---------------------------------------------------------------| + * |Shif| #| Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD| + * |---------------------------------------------------------------| + * |NcCtl| Alt| CTab| LyrSpc | CGv| Alt|Lef|Dow|Rig| + * `---------------------------------------------------------------' + */ + [0] = LAYOUT_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_HOME, + SRCH_CTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_END, + KC_LSFT, HSH_TLD, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + NC_CTL, KC_LALT, CMD_TAB_CMD, LYR_SPC, CMD_GRV_CMD, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT + ), + /* Layer 1: Special + * ,---------------------------------------------------------------. + * | ยง| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |Iso| + * |---------------------------------------------------------------| + * | | | | | | | | | | | | | | | | + * |------------------------------------------------------` |---| + * | | | | | | | | | |CSL| | | `| | | + * |---------------------------------------------------------------| + * | | `| | |CAC| | | | | | | | |PgU| | + * |---------------------------------------------------------------| + * | | | | | | |Hom|PgD|End| + * `---------------------------------------------------------------' + */ + [1] = LAYOUT_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F10, KC_F11, KC_TRNS, ISO_COUNTRY_CODE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CMD_SFT_L, KC_TRNS, KC_TRNS, KC_NUBS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_NUBS, KC_TRNS, KC_TRNS, CMD_ALT_C, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDOWN, KC_END + ), +}; + +void matrix_init_keymap(void) { + rgblight_enable_noeeprom(); + rgblight_sethsv_teal(); +} + +uint32_t layer_state_set_keymap(uint32_t state) { + switch (biton32(state)) { + case 1: + rgblight_sethsv_noeeprom_magenta(); + break; + default: // for any other layers, or the default layer + rgblight_sethsv_noeeprom_cyan(); + break; + } + return state; +} diff --git a/keyboards/percent/canoe/keymaps/iso/keymap.c b/keyboards/percent/canoe/keymaps/iso/keymap.c new file mode 100644 index 0000000000..89af719d12 --- /dev/null +++ b/keyboards/percent/canoe/keymaps/iso/keymap.c @@ -0,0 +1,29 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_END, + KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPACE, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT + ), +}; + diff --git a/keyboards/percent/canoe/matrix.c b/keyboards/percent/canoe/matrix.c new file mode 100644 index 0000000000..245813dfd2 --- /dev/null +++ b/keyboards/percent/canoe/matrix.c @@ -0,0 +1,112 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include <util/delay.h> + +#include "matrix.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +static uint8_t debouncing = DEBOUNCE; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +void matrix_set_row_status(uint8_t row); +uint8_t bit_reverse(uint8_t x); + +void matrix_init(void) { + // all outputs for rows high + DDRB = 0xFF; + PORTB = 0xFF; + // all inputs for columns + DDRA = 0x00; + DDRC &= ~(0x111111<<2); + DDRD &= ~(1<<PIND7); + // all columns are pulled-up + PORTA = 0xFF; + PORTC |= (0b111111<<2); + PORTD |= (1<<PIND7); + + // initialize matrix state: all keys off + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = 0x00; + matrix_debouncing[row] = 0x00; + } + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix_set_row_status(row); + _delay_us(5); + + matrix_row_t cols = ( + // cols 0..7, PORTA 0 -> 7 + (~PINA) & 0xFF + ) | ( + // cols 8..13, PORTC 7 -> 0 + bit_reverse((~PINC) & 0xFF) << 8 + ) | ( + // col 14, PORTD 7 + ((~PIND) & (1 << PIND7)) << 7 + ); + + if (matrix_debouncing[row] != cols) { + matrix_debouncing[row] = cols; + debouncing = DEBOUNCE; + } + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + matrix_scan_quantum(); + + return 1; +} + +// declarations +void matrix_set_row_status(uint8_t row) { + DDRB = (1 << row); + PORTB = ~(1 << row); +} + +uint8_t bit_reverse(uint8_t x) { + x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); + x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); + x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); + return x; +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { +} diff --git a/keyboards/percent/canoe/readme.md b/keyboards/percent/canoe/readme.md new file mode 100644 index 0000000000..45773e4683 --- /dev/null +++ b/keyboards/percent/canoe/readme.md @@ -0,0 +1,44 @@ +# Canoe + +A 65% keyboard with some RGB + +Keyboard Maintainer: QMK Community +Hardware Supported: Canoe +Hardware Availability: https://geekhack.org/index.php?topic=92418.0 + +Make example for this keyboard (after setting up your build environment): + + make percent/canoe:default + +Flashing + +ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + +Windows: +1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). +2. Place your keyboard into reset. +3. Press the `Find Device` button and ensure that your keyboard is found. +4. Press the `Open .hex File` button and locate the `.hex` file you created. +5. Press the `Flash Device` button and wait for the process to complete. + +macOS: +1. Install homebrew by typing the following: + ``` + /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" + ``` +2. Install `crosspack-avr`. + ``` + brew cask install crosspack-avr + ``` +3. Install the following packages: + ``` + brew install python3 + pip3 install pyusb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + ``` + +4. Place your keyboard into reset. +5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/percent/canoe/rules.mk b/keyboards/percent/canoe/rules.mk new file mode 100644 index 0000000000..bb14269a2b --- /dev/null +++ b/keyboards/percent/canoe/rules.mk @@ -0,0 +1,30 @@ +# MCU name +MCU = atmega32a + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = bootloadHID + +# build options +BOOTMAGIC_ENABLE = full +MOUSEKEY_ENABLE = no +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = yes +COMMAND_ENABLE = yes +BACKLIGHT_ENABLE = no +RGBLIGHT_ENABLE = yes +WS2812_DRIVER = i2c + +OPT_DEFS = -DDEBUG_LEVEL=0 + +# custom matrix setup +CUSTOM_MATRIX = yes +SRC = matrix.c + +LAYOUTS = 65_ansi_blocker diff --git a/keyboards/percent/canoe/usbconfig.h b/keyboards/percent/canoe/usbconfig.h new file mode 100644 index 0000000000..85a915bb46 --- /dev/null +++ b/keyboards/percent/canoe/usbconfig.h @@ -0,0 +1,386 @@ +/* Name: usbconfig.h + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2005-04-01 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ + */ + +#ifndef __usbconfig_h_included__ +#define __usbconfig_h_included__ + +#include "config.h" + +/* +General Description: +This file is an example configuration (with inline documentation) for the USB +driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is +also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may +wire the lines to any other port, as long as D+ is also wired to INT0 (or any +other hardware interrupt, as long as it is the highest level interrupt, see +section at the end of this file). +*/ + +/* ---------------------------- Hardware Config ---------------------------- */ + +#define USB_CFG_IOPORTNAME D +/* This is the port where the USB bus is connected. When you configure it to + * "B", the registers PORTB, PINB and DDRB will be used. + */ +#define USB_CFG_DMINUS_BIT 3 +/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. + * This may be any bit in the port. + */ +#define USB_CFG_DPLUS_BIT 2 +/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. + * This may be any bit in the port. Please note that D+ must also be connected + * to interrupt pin INT0! [You can also use other interrupts, see section + * "Optional MCU Description" below, or you can connect D- to the interrupt, as + * it is required if you use the USB_COUNT_SOF feature. If you use D- for the + * interrupt, the USB interrupt will also be triggered at Start-Of-Frame + * markers every millisecond.] + */ +#define USB_CFG_CLOCK_KHZ (F_CPU/1000) +/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, + * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code + * require no crystal, they tolerate +/- 1% deviation from the nominal + * frequency. All other rates require a precision of 2000 ppm and thus a + * crystal! + * Since F_CPU should be defined to your actual clock rate anyway, you should + * not need to modify this setting. + */ +#define USB_CFG_CHECK_CRC 0 +/* Define this to 1 if you want that the driver checks integrity of incoming + * data packets (CRC checks). CRC checks cost quite a bit of code size and are + * currently only available for 18 MHz crystal clock. You must choose + * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. + */ + +/* ----------------------- Optional Hardware Config ------------------------ */ + +/* #define USB_CFG_PULLUP_IOPORTNAME D */ +/* If you connect the 1.5k pullup resistor from D- to a port pin instead of + * V+, you can connect and disconnect the device from firmware by calling + * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). + * This constant defines the port on which the pullup resistor is connected. + */ +/* #define USB_CFG_PULLUP_BIT 4 */ +/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined + * above) where the 1.5k pullup resistor is connected. See description + * above for details. + */ + +/* --------------------------- Functional Range ---------------------------- */ + +#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 +/* Define this to 1 if you want to compile a version with two endpoints: The + * default control endpoint 0 and an interrupt-in endpoint (any other endpoint + * number). + */ +#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 +/* Define this to 1 if you want to compile a version with three endpoints: The + * default control endpoint 0, an interrupt-in endpoint 3 (or the number + * configured below) and a catch-all default interrupt-in endpoint as above. + * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. + */ +#define USB_CFG_EP3_NUMBER 3 +/* If the so-called endpoint 3 is used, it can now be configured to any other + * endpoint number (except 0) with this macro. Default if undefined is 3. + */ +/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ +/* The above macro defines the startup condition for data toggling on the + * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. + * Since the token is toggled BEFORE sending any data, the first packet is + * sent with the oposite value of this configuration! + */ +#define USB_CFG_IMPLEMENT_HALT 0 +/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature + * for endpoint 1 (interrupt endpoint). Although you may not need this feature, + * it is required by the standard. We have made it a config option because it + * bloats the code considerably. + */ +#define USB_CFG_SUPPRESS_INTR_CODE 0 +/* Define this to 1 if you want to declare interrupt-in endpoints, but don't + * want to send any data over them. If this macro is defined to 1, functions + * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if + * you need the interrupt-in endpoints in order to comply to an interface + * (e.g. HID), but never want to send any data. This option saves a couple + * of bytes in flash memory and the transmit buffers in RAM. + */ +#define USB_CFG_IS_SELF_POWERED 0 +/* Define this to 1 if the device has its own power supply. Set it to 0 if the + * device is powered from the USB bus. + */ +#define USB_CFG_IMPLEMENT_FN_WRITE 1 +/* Set this to 1 if you want usbFunctionWrite() to be called for control-out + * transfers. Set it to 0 if you don't need it and want to save a couple of + * bytes. + */ +#define USB_CFG_IMPLEMENT_FN_READ 0 +/* Set this to 1 if you need to send control replies which are generated + * "on the fly" when usbFunctionRead() is called. If you only want to send + * data from a static buffer, set it to 0 and return the data from + * usbFunctionSetup(). This saves a couple of bytes. + */ +#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 +/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. + * You must implement the function usbFunctionWriteOut() which receives all + * interrupt/bulk data sent to any endpoint other than 0. The endpoint number + * can be found in 'usbRxToken'. + */ +#define USB_CFG_HAVE_FLOWCONTROL 0 +/* Define this to 1 if you want flowcontrol over USB data. See the definition + * of the macros usbDisableAllRequests() and usbEnableAllRequests() in + * usbdrv.h. + */ +#define USB_CFG_DRIVER_FLASH_PAGE 0 +/* If the device has more than 64 kBytes of flash, define this to the 64 k page + * where the driver's constants (descriptors) are located. Or in other words: + * Define this to 1 for boot loaders on the ATMega128. + */ +#define USB_CFG_LONG_TRANSFERS 0 +/* Define this to 1 if you want to send/receive blocks of more than 254 bytes + * in a single control-in or control-out transfer. Note that the capability + * for long transfers increases the driver size. + */ +/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ +/* This macro is a hook if you want to do unconventional things. If it is + * defined, it's inserted at the beginning of received message processing. + * If you eat the received message and don't want default processing to + * proceed, do a return after doing your things. One possible application + * (besides debugging) is to flash a status LED on each packet. + */ +/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ +/* This macro is a hook if you need to know when an USB RESET occurs. It has + * one parameter which distinguishes between the start of RESET state and its + * end. + */ +/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ +/* This macro (if defined) is executed when a USB SET_ADDRESS request was + * received. + */ +#define USB_COUNT_SOF 1 +/* define this macro to 1 if you need the global variable "usbSofCount" which + * counts SOF packets. This feature requires that the hardware interrupt is + * connected to D- instead of D+. + */ +/* #ifdef __ASSEMBLER__ + * macro myAssemblerMacro + * in YL, TCNT0 + * sts timer0Snapshot, YL + * endm + * #endif + * #define USB_SOF_HOOK myAssemblerMacro + * This macro (if defined) is executed in the assembler module when a + * Start Of Frame condition is detected. It is recommended to define it to + * the name of an assembler macro which is defined here as well so that more + * than one assembler instruction can be used. The macro may use the register + * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages + * immediately after an SOF pulse may be lost and must be retried by the host. + * What can you do with this hook? Since the SOF signal occurs exactly every + * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in + * designs running on the internal RC oscillator. + * Please note that Start Of Frame detection works only if D- is wired to the + * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! + */ +#define USB_CFG_CHECK_DATA_TOGGLING 0 +/* define this macro to 1 if you want to filter out duplicate data packets + * sent by the host. Duplicates occur only as a consequence of communication + * errors, when the host does not receive an ACK. Please note that you need to + * implement the filtering yourself in usbFunctionWriteOut() and + * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable + * for each control- and out-endpoint to check for duplicate packets. + */ +#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 +/* define this macro to 1 if you want the function usbMeasureFrameLength() + * compiled in. This function can be used to calibrate the AVR's RC oscillator. + */ +#define USB_USE_FAST_CRC 0 +/* The assembler module has two implementations for the CRC algorithm. One is + * faster, the other is smaller. This CRC routine is only used for transmitted + * messages where timing is not critical. The faster routine needs 31 cycles + * per byte while the smaller one needs 61 to 69 cycles. The faster routine + * may be worth the 32 bytes bigger code size if you transmit lots of data and + * run the AVR close to its limit. + */ + +/* -------------------------- Device Description --------------------------- */ + +#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) +/* USB vendor ID for the device, low byte first. If you have registered your + * own Vendor ID, define it here. Otherwise you may use one of obdev's free + * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! + * *** IMPORTANT NOTE *** + * This template uses obdev's shared VID/PID pair for Vendor Class devices + * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand + * the implications! + */ +#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) +/* This is the ID of the product, low byte first. It is interpreted in the + * scope of the vendor ID. If you have registered your own VID with usb.org + * or if you have licensed a PID from somebody else, define it here. Otherwise + * you may use one of obdev's free shared VID/PID pairs. See the file + * USB-IDs-for-free.txt for details! + * *** IMPORTANT NOTE *** + * This template uses obdev's shared VID/PID pair for Vendor Class devices + * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand + * the implications! + */ +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) +/* Version number of the device: Minor number first, then major number. + */ +#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' +#define USB_CFG_VENDOR_NAME_LEN 13 +/* These two values define the vendor name returned by the USB device. The name + * must be given as a list of characters under single quotes. The characters + * are interpreted as Unicode (UTF-16) entities. + * If you don't want a vendor name string, undefine these macros. + * ALWAYS define a vendor name containing your Internet domain name if you use + * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for + * details. + */ +#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' +#define USB_CFG_DEVICE_NAME_LEN 8 +/* Same as above for the device name. If you don't want a device name, undefine + * the macros. See the file USB-IDs-for-free.txt before you assign a name if + * you use a shared VID/PID. + */ +/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ +/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ +/* Same as above for the serial number. If you don't want a serial number, + * undefine the macros. + * It may be useful to provide the serial number through other means than at + * compile time. See the section about descriptor properties below for how + * to fine tune control over USB descriptors such as the string descriptor + * for the serial number. + */ +#define USB_CFG_DEVICE_CLASS 0 +#define USB_CFG_DEVICE_SUBCLASS 0 +/* See USB specification if you want to conform to an existing device class. + * Class 0xff is "vendor specific". + */ +#define USB_CFG_INTERFACE_CLASS 3 /* HID */ +#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ +#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ +/* See USB specification if you want to conform to an existing device class or + * protocol. The following classes must be set at interface level: + * HID class is 3, no subclass and protocol required (but may be useful!) + * CDC class is 2, use subclass 2 and protocol 1 for ACM + */ +#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 +/* Define this to the length of the HID report descriptor, if you implement + * an HID device. Otherwise don't define it or define it to 0. + * If you use this define, you must add a PROGMEM character array named + * "usbHidReportDescriptor" to your code which contains the report descriptor. + * Don't forget to keep the array and this define in sync! + */ + +/* #define USB_PUBLIC static */ +/* Use the define above if you #include usbdrv.c instead of linking against it. + * This technique saves a couple of bytes in flash memory. + */ + +/* ------------------- Fine Control over USB Descriptors ------------------- */ +/* If you don't want to use the driver's default USB descriptors, you can + * provide our own. These can be provided as (1) fixed length static data in + * flash memory, (2) fixed length static data in RAM or (3) dynamically at + * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more + * information about this function. + * Descriptor handling is configured through the descriptor's properties. If + * no properties are defined or if they are 0, the default descriptor is used. + * Possible properties are: + * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched + * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is + * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if + * you want RAM pointers. + * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found + * in static memory is in RAM, not in flash memory. + * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), + * the driver must know the descriptor's length. The descriptor itself is + * found at the address of a well known identifier (see below). + * List of static descriptor names (must be declared PROGMEM if in flash): + * char usbDescriptorDevice[]; + * char usbDescriptorConfiguration[]; + * char usbDescriptorHidReport[]; + * char usbDescriptorString0[]; + * int usbDescriptorStringVendor[]; + * int usbDescriptorStringDevice[]; + * int usbDescriptorStringSerialNumber[]; + * Other descriptors can't be provided statically, they must be provided + * dynamically at runtime. + * + * Descriptor properties are or-ed or added together, e.g.: + * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) + * + * The following descriptors are defined: + * USB_CFG_DESCR_PROPS_DEVICE + * USB_CFG_DESCR_PROPS_CONFIGURATION + * USB_CFG_DESCR_PROPS_STRINGS + * USB_CFG_DESCR_PROPS_STRING_0 + * USB_CFG_DESCR_PROPS_STRING_VENDOR + * USB_CFG_DESCR_PROPS_STRING_PRODUCT + * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER + * USB_CFG_DESCR_PROPS_HID + * USB_CFG_DESCR_PROPS_HID_REPORT + * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) + * + * Note about string descriptors: String descriptors are not just strings, they + * are Unicode strings prefixed with a 2 byte header. Example: + * int serialNumberDescriptor[] = { + * USB_STRING_DESCRIPTOR_HEADER(6), + * 'S', 'e', 'r', 'i', 'a', 'l' + * }; + */ + +#define USB_CFG_DESCR_PROPS_DEVICE 0 +#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 +#define USB_CFG_DESCR_PROPS_STRINGS 0 +#define USB_CFG_DESCR_PROPS_STRING_0 0 +#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_HID 0 +#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 +#define USB_CFG_DESCR_PROPS_UNKNOWN 0 + +#define usbMsgPtr_t unsigned short +/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to + * a scalar type here because gcc generates slightly shorter code for scalar + * arithmetics than for pointer arithmetics. Remove this define for backward + * type compatibility or define it to an 8 bit type if you use data in RAM only + * and all RAM is below 256 bytes (tiny memory model in IAR CC). + */ + +/* ----------------------- Optional MCU Description ------------------------ */ + +/* The following configurations have working defaults in usbdrv.h. You + * usually don't need to set them explicitly. Only if you want to run + * the driver on a device which is not yet supported or with a compiler + * which is not fully supported (such as IAR C) or if you use a differnt + * interrupt than INT0, you may have to define some of these. + */ +/* #define USB_INTR_CFG MCUCR */ +/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ +/* #define USB_INTR_CFG_CLR 0 */ +/* #define USB_INTR_ENABLE GIMSK */ +/* #define USB_INTR_ENABLE_BIT INT0 */ +/* #define USB_INTR_PENDING GIFR */ +/* #define USB_INTR_PENDING_BIT INTF0 */ +/* #define USB_INTR_VECTOR INT0_vect */ + +/* Set INT1 for D- falling edge to count SOF */ +/* #define USB_INTR_CFG EICRA */ +#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) +/* #define USB_INTR_CFG_CLR 0 */ +/* #define USB_INTR_ENABLE EIMSK */ +#define USB_INTR_ENABLE_BIT INT1 +/* #define USB_INTR_PENDING EIFR */ +#define USB_INTR_PENDING_BIT INTF1 +#define USB_INTR_VECTOR INT1_vect + +#endif /* __usbconfig_h_included__ */ |