1 files changed, 0 insertions, 116 deletions
diff --git a/keyboards/paladin64/config.h b/keyboards/paladin64/config.h
deleted file mode 100755
index fa588ee354..0000000000
--- a/keyboards/paladin64/config.h
+++ /dev/null
@@ -1,116 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    inachie
-#define PRODUCT         paladin64
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 8
-
-#ifdef PS2_USE_USART
-    #define PS2_CLOCK_PORT  PORTD
-    #define PS2_CLOCK_PIN   PIND
-    #define PS2_CLOCK_DDR   DDRD
-    #define PS2_CLOCK_BIT   5
-    #define PS2_DATA_PORT   PORTD
-    #define PS2_DATA_PIN    PIND
-    #define PS2_DATA_DDR    DDRD
-    #define PS2_DATA_BIT    2
-
-    /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling
-     * edge */
-    /* set DDR of CLOCK as input to be slave */
-    #define PS2_USART_INIT() do {   \
-                    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
-                    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
-                    UCSR1C = ((1 << UMSEL10) |  \
-                                                  (3 << UPM10)   |  \
-                                                  (0 << USBS1)   |  \
-                                                  (3 << UCSZ10)  |  \
-                                                  (0 << UCPOL1));   \
-                    UCSR1A = 0;                 \
-                    UBRR1H = 0;                 \
-                    UBRR1L = 0;                 \
-                } while (0)
-    #define PS2_USART_RX_INT_ON() do {  \
-                    UCSR1B = ((1 << RXCIE1) |       \
-                                                  (1 << RXEN1));        \
-                } while (0)
-    #define PS2_USART_RX_POLL_ON() do { \
-                    UCSR1B = (1 << RXEN1);          \
-                } while (0)
-    #define PS2_USART_OFF() do {    \
-                    UCSR1C = 0;                 \
-                    UCSR1B &= ~((1 << RXEN1) |  \
-                                                    (1 << TXEN1));  \
-                } while (0)
-    #define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
-    #define PS2_USART_RX_DATA       UDR1
-    #define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
-    #define PS2_USART_RX_VECT       USART1_RX_vect
-#endif
-
-#ifdef PS2_USE_INT
-#define PS2_CLOCK_PORT  PORTD
-#define PS2_CLOCK_PIN   PIND
-#define PS2_CLOCK_DDR   DDRD
-#define PS2_CLOCK_BIT   2
-#define PS2_DATA_PORT   PORTD
-#define PS2_DATA_PIN    PIND
-#define PS2_DATA_DDR    DDRD
-#define PS2_DATA_BIT    5
-
-    #define PS2_INT_INIT()  do {    \
-        EICRA |= ((1<<ISC21) |      \
-                  (0<<ISC20));      \
-    } while (0)
-    #define PS2_INT_ON()  do {      \
-        EIMSK |= (1<<INT2);         \
-    } while (0)
-    #define PS2_INT_OFF() do {      \
-        EIMSK &= ~(1<<INT2);        \
-    } while (0)
-    #define PS2_INT_VECT   INT2_vect
-
-#endif
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, B0, D3 }
-#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, D1 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* number of backlight levels */
-
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 3
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define RGB_DI_PIN D0
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 14
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 12
-#endif
-
-#endif