diff options
Diffstat (limited to 'keyboards/noxary')
30 files changed, 30 insertions, 429 deletions
diff --git a/keyboards/noxary/220/config.h b/keyboards/noxary/220/config.h index 95814568a2..dbbf043e26 100644 --- a/keyboards/noxary/220/config.h +++ b/keyboards/noxary/220/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 4 /* * Keyboard Matrix Assignments @@ -39,52 +34,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -100,7 +57,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/noxary/220/info.json b/keyboards/noxary/220/info.json index 7eebbba900..423b20a663 100644 --- a/keyboards/noxary/220/info.json +++ b/keyboards/noxary/220/info.json @@ -8,6 +8,9 @@ "pid": "0x0899", "device_version": "0.0.1" }, + "processor": "atmega32u2", + "bootloader": "atmel-dfu", + "community_layouts": ["ortho_6x4"], "layouts": { "LAYOUT_ortho_6x4": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":0, "y":2.5}, {"x":1, "y":2.5}, {"x":2, "y":2.5}, {"x":3, "y":2.5}, {"x":0, "y":3.5}, {"x":1, "y":3.5}, {"x":2, "y":3.5}, {"x":3, "y":3.5}, {"x":0, "y":4.5}, {"x":1, "y":4.5}, {"x":2, "y":4.5}, {"x":3, "y":4.5}, {"x":0, "y":5.5}, {"x":1, "y":5.5}, {"x":2, "y":5.5}, {"x":3, "y":5.5}] diff --git a/keyboards/noxary/220/rules.mk b/keyboards/noxary/220/rules.mk index 71841c3be4..8dea375783 100644 --- a/keyboards/noxary/220/rules.mk +++ b/keyboards/noxary/220/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u2 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_6x4 diff --git a/keyboards/noxary/260/config.h b/keyboards/noxary/260/config.h index bd3fc9f2af..da5e664de5 100644 --- a/keyboards/noxary/260/config.h +++ b/keyboards/noxary/260/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 /* * Keyboard Matrix Assignments @@ -39,73 +34,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define LED_CAPS_LOCK_PIN B1 -#define LED_PIN_ON_STATE 0 - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -// #define RGB_DI_PIN E2 -// #ifdef RGB_DI_PIN -// #define RGBLED_NUM 16 -// #define RGBLIGHT_HUE_STEP 8 -// #define RGBLIGHT_SAT_STEP 8 -// #define RGBLIGHT_VAL_STEP 8 -// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -// /*== customize breathing effect ==*/ -// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -// /*==== use exp() and sin() ====*/ -// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 -// #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -121,7 +57,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/noxary/260/info.json b/keyboards/noxary/260/info.json index 997d2f7cf2..54328d3165 100644 --- a/keyboards/noxary/260/info.json +++ b/keyboards/noxary/260/info.json @@ -8,6 +8,13 @@ "pid": "0x0A29", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "B1", + "on_state": 0 + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["60_ansi", "60_iso", "60_hhkb", "60_tsangan_hhkb"], "layouts": { "LAYOUT_all": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] diff --git a/keyboards/noxary/260/rules.mk b/keyboards/noxary/260/rules.mk index 52cbcd777f..9aa342e19d 100644 --- a/keyboards/noxary/260/rules.mk +++ b/keyboards/noxary/260/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -17,5 +11,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes - -LAYOUTS = 60_ansi 60_iso 60_hhkb 60_tsangan_hhkb diff --git a/keyboards/noxary/268/config.h b/keyboards/noxary/268/config.h index 26d9b272dc..8037caa96a 100644 --- a/keyboards/noxary/268/config.h +++ b/keyboards/noxary/268/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -39,14 +34,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* number of backlight levels */ #define BACKLIGHT_PIN B7 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/noxary/268/info.json b/keyboards/noxary/268/info.json index f32ea9887c..842c397022 100644 --- a/keyboards/noxary/268/info.json +++ b/keyboards/noxary/268/info.json @@ -8,6 +8,8 @@ "pid": "0x0A79", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"- _", "x":11, "y":0}, {"label":"= +", "x":12, "y":0}, {"label":"Back Space", "x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"` ~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[ {", "x":11.5, "y":1}, {"label":"] }", "x":12.5, "y":1}, {"label":"\\ |", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":"; :", "x":10.75, "y":2}, {"label":"' \"", "x":11.75, "y":2}, {"label":"# ~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Page Up", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\ |", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":", <", "x":9.25, "y":3}, {"label":". >", "x":10.25, "y":3}, {"label":"/ ?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3}, {"label":"Shift", "x":13.25, "y":3, "w":0.75}, {"label":"Up", "x":14, "y":3}, {"label":"Page Down", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"Left", "x":13, "y":4}, {"label":"Down", "x":14, "y":4}, {"label":"Right", "x":15, "y":4}] diff --git a/keyboards/noxary/268/rules.mk b/keyboards/noxary/268/rules.mk index 983fcface1..8dea375783 100644 --- a/keyboards/noxary/268/rules.mk +++ b/keyboards/noxary/268/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/noxary/268_2/config.h b/keyboards/noxary/268_2/config.h index 3cade7ae27..8153787c93 100644 --- a/keyboards/noxary/268_2/config.h +++ b/keyboards/noxary/268_2/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -39,54 +34,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define BACKLIGHT_PIN B7 -//define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -102,7 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/noxary/268_2/info.json b/keyboards/noxary/268_2/info.json index 18a7dfe774..80dafd23b9 100644 --- a/keyboards/noxary/268_2/info.json +++ b/keyboards/noxary/268_2/info.json @@ -8,6 +8,9 @@ "pid": "0x0A7A", "device_version": "0.0.2" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["65_ansi_blocker"], "layouts": { "LAYOUT_65_ansi_blocker": { "layout": [ diff --git a/keyboards/noxary/268_2/rules.mk b/keyboards/noxary/268_2/rules.mk index fff3b815d4..4caf87aa2b 100644 --- a/keyboards/noxary/268_2/rules.mk +++ b/keyboards/noxary/268_2/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi_blocker diff --git a/keyboards/noxary/268_2_rgb/config.h b/keyboards/noxary/268_2_rgb/config.h index 347a63c4b4..e3fa886915 100644 --- a/keyboards/noxary/268_2_rgb/config.h +++ b/keyboards/noxary/268_2_rgb/config.h @@ -14,11 +14,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -36,11 +31,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define LED_CAPS_LOCK_PIN B0 - #define BACKLIGHT_PIN B7 -//define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 /* ws2812b options */ #define RGB_DI_PIN B5 @@ -62,12 +53,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /*#define RGBLIGHT_LIMIT_VAL 255 */ #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/noxary/268_2_rgb/info.json b/keyboards/noxary/268_2_rgb/info.json index 9cf57e646f..7b52a82966 100644 --- a/keyboards/noxary/268_2_rgb/info.json +++ b/keyboards/noxary/268_2_rgb/info.json @@ -8,6 +8,11 @@ "pid": "0x0A7C", "device_version": "0.0.1" }, + "indicators": { + "caps_lock": "B0" + }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT_65_ansi_blocker": { "layout": [ diff --git a/keyboards/noxary/268_2_rgb/rules.mk b/keyboards/noxary/268_2_rgb/rules.mk index 38f81fd4dc..1955f1d315 100644 --- a/keyboards/noxary/268_2_rgb/rules.mk +++ b/keyboards/noxary/268_2_rgb/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/noxary/280/config.h b/keyboards/noxary/280/config.h index 8ba050ab83..e1f29f502f 100644 --- a/keyboards/noxary/280/config.h +++ b/keyboards/noxary/280/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 9 /* * Keyboard Matrix Assignments @@ -39,53 +34,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -101,7 +57,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/noxary/280/info.json b/keyboards/noxary/280/info.json index e3eeabc84f..8f9b2aafc9 100644 --- a/keyboards/noxary/280/info.json +++ b/keyboards/noxary/280/info.json @@ -8,6 +8,8 @@ "pid": "0x0AF1", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":3.5, "w":1.25}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] diff --git a/keyboards/noxary/280/rules.mk b/keyboards/noxary/280/rules.mk index 983fcface1..8dea375783 100644 --- a/keyboards/noxary/280/rules.mk +++ b/keyboards/noxary/280/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/noxary/378/config.h b/keyboards/noxary/378/config.h index 3b8af6d168..bf285221bd 100644 --- a/keyboards/noxary/378/config.h +++ b/keyboards/noxary/378/config.h @@ -17,28 +17,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 17 - #define MATRIX_COL_PINS { A7 , A3 , B9 , B8 , B7 , B6 , B5 , B4 , B3 , A15, A2 , A1 , A0 , F1 , F0 , C14 , C15 } #define MATRIX_ROW_PINS { A10, B11, A4 , A5 , A6 } #define DIODE_DIRECTION COL2ROW -//#define BACKLIGHT_PIN A6 -//#define BACKLIGHT_PWM_DRIVER PWMD3 -//#define BACKLIGHT_PWM_CHANNEL 1 -//#define BACKLIGHT_PAL_MODE 1 -//#define BACKLIGHT_LEVELS 6 -//#define BACKLIGHT_BREATHING -//#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/noxary/378/info.json b/keyboards/noxary/378/info.json index 24ef51cbe8..2663b46dfa 100644 --- a/keyboards/noxary/378/info.json +++ b/keyboards/noxary/378/info.json @@ -8,6 +8,8 @@ "pid": "0x017A", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/noxary/378/rules.mk b/keyboards/noxary/378/rules.mk index 75490909f3..3c9c278b51 100644 --- a/keyboards/noxary/378/rules.mk +++ b/keyboards/noxary/378/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build options # change yes to no to disable # diff --git a/keyboards/noxary/valhalla/config.h b/keyboards/noxary/valhalla/config.h index 7620639ec4..e6ff2a3cfe 100644 --- a/keyboards/noxary/valhalla/config.h +++ b/keyboards/noxary/valhalla/config.h @@ -17,28 +17,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - #define MATRIX_COL_PINS { B12, B11, B10, B2 , B1 , B0 , A10, B9 , B8 , B7 , B6 , B5 , B4 , B3 , A15 } #define MATRIX_ROW_PINS { A8 , A9 , B13, B14, B15 } #define DIODE_DIRECTION COL2ROW -//#define BACKLIGHT_PIN A6 -//#define BACKLIGHT_PWM_DRIVER PWMD3 -//#define BACKLIGHT_PWM_CHANNEL 1 -//#define BACKLIGHT_PAL_MODE 1 -//#define BACKLIGHT_LEVELS 6 -//#define BACKLIGHT_BREATHING -//#define BREATHING_PERIOD 6 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/noxary/valhalla/info.json b/keyboards/noxary/valhalla/info.json index d5934b2e70..cfa29e69b0 100644 --- a/keyboards/noxary/valhalla/info.json +++ b/keyboards/noxary/valhalla/info.json @@ -8,6 +8,8 @@ "pid": "0x5648", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/noxary/valhalla/rules.mk b/keyboards/noxary/valhalla/rules.mk index 75490909f3..3c9c278b51 100644 --- a/keyboards/noxary/valhalla/rules.mk +++ b/keyboards/noxary/valhalla/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build options # change yes to no to disable # diff --git a/keyboards/noxary/vulcan/config.h b/keyboards/noxary/vulcan/config.h index e54c0c6044..515d67109d 100644 --- a/keyboards/noxary/vulcan/config.h +++ b/keyboards/noxary/vulcan/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 /* * Keyboard Matrix Assignments @@ -39,43 +34,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -91,7 +54,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/noxary/vulcan/info.json b/keyboards/noxary/vulcan/info.json index 7956a21deb..4a5ee09d62 100644 --- a/keyboards/noxary/vulcan/info.json +++ b/keyboards/noxary/vulcan/info.json @@ -8,6 +8,8 @@ "pid": "0x0011", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/noxary/vulcan/rules.mk b/keyboards/noxary/vulcan/rules.mk index f0cdbb9b0c..ab9ede1716 100644 --- a/keyboards/noxary/vulcan/rules.mk +++ b/keyboards/noxary/vulcan/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # diff --git a/keyboards/noxary/x268/config.h b/keyboards/noxary/x268/config.h index 0ebd52eee5..05d4dded48 100644 --- a/keyboards/noxary/x268/config.h +++ b/keyboards/noxary/x268/config.h @@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 /* * Keyboard Matrix Assignments @@ -40,9 +35,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B7 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 3 -#endif /* ws2812b options */ #define RGB_DI_PIN B5 @@ -64,45 +56,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /*#define RGBLIGHT_LIMIT_VAL 255 */ #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -118,7 +76,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/noxary/x268/info.json b/keyboards/noxary/x268/info.json index bbad48252a..bbc0eacdad 100644 --- a/keyboards/noxary/x268/info.json +++ b/keyboards/noxary/x268/info.json @@ -8,6 +8,8 @@ "pid": "0x0A7B", "device_version": "0.7.8" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/noxary/x268/rules.mk b/keyboards/noxary/x268/rules.mk index 35fbff0af9..a4b56c37dd 100644 --- a/keyboards/noxary/x268/rules.mk +++ b/keyboards/noxary/x268/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # |