diff options
Diffstat (limited to 'keyboards/novelkeys')
22 files changed, 27 insertions, 355 deletions
diff --git a/keyboards/novelkeys/nk1/config.h b/keyboards/novelkeys/nk1/config.h index 1e86e1ec91..88b9c7abb8 100644 --- a/keyboards/novelkeys/nk1/config.h +++ b/keyboards/novelkeys/nk1/config.h @@ -17,7 +17,6 @@ #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 1 @@ -28,50 +27,6 @@ { D4 } \ } -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - #define RGB_DI_PIN F0 #ifdef RGB_DI_PIN #define RGBLED_NUM 9 diff --git a/keyboards/novelkeys/nk1/info.json b/keyboards/novelkeys/nk1/info.json index 79be14a48e..137608c978 100755 --- a/keyboards/novelkeys/nk1/info.json +++ b/keyboards/novelkeys/nk1/info.json @@ -8,6 +8,9 @@ "pid": "0x4E4D", "device_version": "0.0.1" }, + "processor": "atmega32u4", + "bootloader": "atmel-dfu", + "community_layouts": ["ortho_1x1"], "layouts": { "LAYOUT_ortho_1x1": { "layout": [{"x": 0, "y": 0}] diff --git a/keyboards/novelkeys/nk1/rules.mk b/keyboards/novelkeys/nk1/rules.mk index 16d3dfedd0..b851d0ab39 100644 --- a/keyboards/novelkeys/nk1/rules.mk +++ b/keyboards/novelkeys/nk1/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = ortho_1x1 diff --git a/keyboards/novelkeys/nk20/config.h b/keyboards/novelkeys/nk20/config.h index f5a75dd14f..d4fbea0ced 100644 --- a/keyboards/novelkeys/nk20/config.h +++ b/keyboards/novelkeys/nk20/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -29,42 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -// #define MATRIX_HAS_GHOST - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -// #define FORCE_NKRO - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - /* RGB options */ #define RGB_DI_PIN A7 diff --git a/keyboards/novelkeys/nk20/info.json b/keyboards/novelkeys/nk20/info.json index f6da7d52da..e50174c50a 100644 --- a/keyboards/novelkeys/nk20/info.json +++ b/keyboards/novelkeys/nk20/info.json @@ -8,6 +8,8 @@ "pid": "0x4E4E", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layout_aliases": { "LAYOUT_all": "LAYOUT" }, diff --git a/keyboards/novelkeys/nk20/rules.mk b/keyboards/novelkeys/nk20/rules.mk index 230cc1ec14..96367c6a4c 100644 --- a/keyboards/novelkeys/nk20/rules.mk +++ b/keyboards/novelkeys/nk20/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF diff --git a/keyboards/novelkeys/nk65/config.h b/keyboards/novelkeys/nk65/config.h index e1597c9da6..d0577d6bf6 100755 --- a/keyboards/novelkeys/nk65/config.h +++ b/keyboards/novelkeys/nk65/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -30,54 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - /* Backlight options */ #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/novelkeys/nk65/info.json b/keyboards/novelkeys/nk65/info.json index 77adcdbc5d..e223e11b5c 100755 --- a/keyboards/novelkeys/nk65/info.json +++ b/keyboards/novelkeys/nk65/info.json @@ -8,6 +8,10 @@ "pid": "0x4E4B", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", + "community_layouts": ["65_ansi"], "layouts": { "LAYOUT_65_ansi": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Page Up", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Page Down", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] diff --git a/keyboards/novelkeys/nk65/keymaps/madhatter/keymap.c b/keyboards/novelkeys/nk65/keymaps/madhatter/keymap.c index ea00650c37..c5045c4551 100755 --- a/keyboards/novelkeys/nk65/keymaps/madhatter/keymap.c +++ b/keyboards/novelkeys/nk65/keymaps/madhatter/keymap.c @@ -22,16 +22,16 @@ enum my_layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT_65_ansi( /* Base */ - QK_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_HOME,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \ + QK_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(_FNMS), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), [_FNMS] = LAYOUT_65_ansi( /* FN */ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT, KC_TRNS,\ - AG_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ - KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT, KC_TRNS, + AG_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; diff --git a/keyboards/novelkeys/nk65/rules.mk b/keyboards/novelkeys/nk65/rules.mk index d64ce8e1f6..a231765dff 100755 --- a/keyboards/novelkeys/nk65/rules.mk +++ b/keyboards/novelkeys/nk65/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating # backlight effects. @@ -25,8 +18,6 @@ NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plu CIE1931_CURVE = yes -LAYOUTS = 65_ansi - # project specific files SRC = keyboards/wilba_tech/wt_main.c \ keyboards/wilba_tech/wt_rgb_backlight.c \ diff --git a/keyboards/novelkeys/nk65b/config.h b/keyboards/novelkeys/nk65b/config.h index 0976b42543..16c202c064 100755 --- a/keyboards/novelkeys/nk65b/config.h +++ b/keyboards/novelkeys/nk65b/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -29,46 +28,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Indicator LEDs */ #define LED_CAPS_LOCK_PIN A14 #define LED_PIN_ON_STATE 0 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -// #define MATRIX_HAS_GHOST - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -// #define FORCE_NKRO - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - /* RGB options */ #define RGB_DI_PIN B4 diff --git a/keyboards/novelkeys/nk65b/info.json b/keyboards/novelkeys/nk65b/info.json index 609a64ab79..2b8beefd6c 100755 --- a/keyboards/novelkeys/nk65b/info.json +++ b/keyboards/novelkeys/nk65b/info.json @@ -8,6 +8,8 @@ "pid": "0x4E4F", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT_65_ansi": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Page Up", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Page Down", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] diff --git a/keyboards/novelkeys/nk65b/rules.mk b/keyboards/novelkeys/nk65b/rules.mk index 230cc1ec14..96367c6a4c 100755 --- a/keyboards/novelkeys/nk65b/rules.mk +++ b/keyboards/novelkeys/nk65b/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF diff --git a/keyboards/novelkeys/nk87/config.h b/keyboards/novelkeys/nk87/config.h index 4481f6283f..4ee2c7548c 100755 --- a/keyboards/novelkeys/nk87/config.h +++ b/keyboards/novelkeys/nk87/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -30,54 +29,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - /* Backlight options */ #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/novelkeys/nk87/info.json b/keyboards/novelkeys/nk87/info.json index e871dfb3eb..8a07b27277 100755 --- a/keyboards/novelkeys/nk87/info.json +++ b/keyboards/novelkeys/nk87/info.json @@ -8,6 +8,9 @@ "pid": "0x4E4C", "device_version": "0.0.1" }, + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C", "layouts": { "LAYOUT_all": { "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1.25, "y":0}, {"label":"0,2", "x":2.25, "y":0}, {"label":"0,3", "x":3.25, "y":0}, {"label":"0,4", "x":4.25, "y":0}, {"label":"0,5", "x":5.5, "y":0}, {"label":"0,6", "x":6.5, "y":0}, {"label":"0,7", "x":7.5, "y":0}, {"label":"0,8", "x":8.5, "y":0}, {"label":"0,9", "x":9.75, "y":0}, {"label":"0,10", "x":10.75, "y":0}, {"label":"0,12", "x":11.75, "y":0}, {"label":"0,12", "x":12.75, "y":0}, {"label":"0,13", "x":14, "y":0}, {"label":"0,14", "x":15.25, "y":0}, {"label":"0,15", "x":16.25, "y":0}, {"label":"0,16", "x":17.25, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1, "y":1.25}, {"label":"1,2", "x":2, "y":1.25}, {"label":"1,3", "x":3, "y":1.25}, {"label":"1,4", "x":4, "y":1.25}, {"label":"1,5", "x":5, "y":1.25}, {"label":"1,6", "x":6, "y":1.25}, {"label":"1,7", "x":7, "y":1.25}, {"label":"1,8", "x":8, "y":1.25}, {"label":"1,9", "x":9, "y":1.25}, {"label":"1,10", "x":10, "y":1.25}, {"label":"1,11", "x":11, "y":1.25}, {"label":"1,12", "x":12, "y":1.25}, {"label":"1,13", "x":13, "y":1.25, "w":2}, {"label":"1,14", "x":15.25, "y":1.25}, {"label":"1,15", "x":16.25, "y":1.25}, {"label":"1,16", "x":17.25, "y":1.25}, {"label":"2,0", "x":0, "y":2.25, "w":1.5}, {"label":"2,1", "x":1.5, "y":2.25}, {"label":"2,2", "x":2.5, "y":2.25}, {"label":"2,3", "x":3.5, "y":2.25}, {"label":"2,4", "x":4.5, "y":2.25}, {"label":"2,5", "x":5.5, "y":2.25}, {"label":"2,6", "x":6.5, "y":2.25}, {"label":"2,7", "x":7.5, "y":2.25}, {"label":"2,8", "x":8.5, "y":2.25}, {"label":"2,9", "x":9.5, "y":2.25}, {"label":"2,10", "x":10.5, "y":2.25}, {"label":"2,11", "x":11.5, "y":2.25}, {"label":"2,12", "x":12.5, "y":2.25}, {"label":"3,12", "x":13.5, "y":2.25, "w":1.5}, {"label":"2,14", "x":15.25, "y":2.25}, {"label":"2,15", "x":16.25, "y":2.25}, {"label":"2,16", "x":17.25, "y":2.25}, {"label":"3,0", "x":0, "y":3.25, "w":1.75}, {"label":"3,1", "x":1.75, "y":3.25}, {"label":"3,2", "x":2.75, "y":3.25}, {"label":"3,3", "x":3.75, "y":3.25}, {"label":"3,4", "x":4.75, "y":3.25}, {"label":"3,5", "x":5.75, "y":3.25}, {"label":"3,6", "x":6.75, "y":3.25}, {"label":"3,7", "x":7.75, "y":3.25}, {"label":"3,8", "x":8.75, "y":3.25}, {"label":"3,9", "x":9.75, "y":3.25}, {"label":"3,10", "x":10.75, "y":3.25}, {"label":"3,11", "x":11.75, "y":3.25}, {"label":"3,13", "x":12.75, "y":3.25, "w":2.25}, {"label":"4,0", "x":0, "y":4.25, "w":2.25}, {"label":"4,2", "x":2.25, "y":4.25}, {"label":"4,3", "x":3.25, "y":4.25}, {"label":"4,4", "x":4.25, "y":4.25}, {"label":"4,5", "x":5.25, "y":4.25}, {"label":"4,6", "x":6.25, "y":4.25}, {"label":"4,7", "x":7.25, "y":4.25}, {"label":"4,8", "x":8.25, "y":4.25}, {"label":"4,9", "x":9.25, "y":4.25}, {"label":"4,10", "x":10.25, "y":4.25}, {"label":"4,11", "x":11.25, "y":4.25}, {"label":"4,12", "x":12.25, "y":4.25, "w":2.75}, {"label":"4,15", "x":16.25, "y":4.25}, {"label":"5,0", "x":0, "y":5.25, "w":1.5}, {"label":"5,1", "x":1.5, "y":5.25}, {"label":"5,2", "x":2.5, "y":5.25, "w":1.5}, {"label":"5,6", "x":4, "y":5.25, "w":7}, {"label":"5,11", "x":11, "y":5.25, "w":1.5}, {"label":"5,12", "x":12.5, "y":5.25}, {"label":"5,13", "x":13.5, "y":5.25, "w":1.5}, {"label":"5,14", "x":15.25, "y":5.25}, {"label":"5,15", "x":16.25, "y":5.25}, {"label":"5,16", "x":17.25, "y":5.25}] diff --git a/keyboards/novelkeys/nk87/rules.mk b/keyboards/novelkeys/nk87/rules.mk index fb3055a2a8..288d802054 100755 --- a/keyboards/novelkeys/nk87/rules.mk +++ b/keyboards/novelkeys/nk87/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating # backlight effects. diff --git a/keyboards/novelkeys/nk87b/config.h b/keyboards/novelkeys/nk87b/config.h index 7830b398b1..38374b7c4b 100644 --- a/keyboards/novelkeys/nk87b/config.h +++ b/keyboards/novelkeys/nk87b/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 6 @@ -29,46 +28,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - /* Indicator LEDs */ #define LED_CAPS_LOCK_PIN A2 #define LED_PIN_ON_STATE 0 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -// #define MATRIX_HAS_GHOST - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -// #define FORCE_NKRO - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - /* RGB options */ #define RGB_DI_PIN B0 diff --git a/keyboards/novelkeys/nk87b/info.json b/keyboards/novelkeys/nk87b/info.json index 01518c9b2f..a7d0eb4d36 100755 --- a/keyboards/novelkeys/nk87b/info.json +++ b/keyboards/novelkeys/nk87b/info.json @@ -8,6 +8,8 @@ "pid": "0x4E50", "device_version": "0.0.1" }, + "processor": "STM32F072", + "bootloader": "stm32-dfu", "layouts": { "LAYOUT_all": { "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1.25, "y":0}, {"label":"0,2", "x":2.25, "y":0}, {"label":"0,3", "x":3.25, "y":0}, {"label":"0,4", "x":4.25, "y":0}, {"label":"0,5", "x":5.5, "y":0}, {"label":"0,6", "x":6.5, "y":0}, {"label":"0,7", "x":7.5, "y":0}, {"label":"0,8", "x":8.5, "y":0}, {"label":"0,9", "x":9.75, "y":0}, {"label":"0,10", "x":10.75, "y":0}, {"label":"0,12", "x":11.75, "y":0}, {"label":"0,12", "x":12.75, "y":0}, {"label":"0,13", "x":14, "y":0}, {"label":"0,14", "x":15.25, "y":0}, {"label":"0,15", "x":16.25, "y":0}, {"label":"0,16", "x":17.25, "y":0}, {"label":"1,0", "x":0, "y":1.25}, {"label":"1,1", "x":1, "y":1.25}, {"label":"1,2", "x":2, "y":1.25}, {"label":"1,3", "x":3, "y":1.25}, {"label":"1,4", "x":4, "y":1.25}, {"label":"1,5", "x":5, "y":1.25}, {"label":"1,6", "x":6, "y":1.25}, {"label":"1,7", "x":7, "y":1.25}, {"label":"1,8", "x":8, "y":1.25}, {"label":"1,9", "x":9, "y":1.25}, {"label":"1,10", "x":10, "y":1.25}, {"label":"1,11", "x":11, "y":1.25}, {"label":"1,12", "x":12, "y":1.25}, {"label":"1,13", "x":13, "y":1.25, "w":2}, {"label":"1,14", "x":15.25, "y":1.25}, {"label":"1,15", "x":16.25, "y":1.25}, {"label":"1,16", "x":17.25, "y":1.25}, {"label":"2,0", "x":0, "y":2.25, "w":1.5}, {"label":"2,1", "x":1.5, "y":2.25}, {"label":"2,2", "x":2.5, "y":2.25}, {"label":"2,3", "x":3.5, "y":2.25}, {"label":"2,4", "x":4.5, "y":2.25}, {"label":"2,5", "x":5.5, "y":2.25}, {"label":"2,6", "x":6.5, "y":2.25}, {"label":"2,7", "x":7.5, "y":2.25}, {"label":"2,8", "x":8.5, "y":2.25}, {"label":"2,9", "x":9.5, "y":2.25}, {"label":"2,10", "x":10.5, "y":2.25}, {"label":"2,11", "x":11.5, "y":2.25}, {"label":"2,12", "x":12.5, "y":2.25}, {"label":"3,12", "x":13.5, "y":2.25, "w":1.5}, {"label":"2,14", "x":15.25, "y":2.25}, {"label":"2,15", "x":16.25, "y":2.25}, {"label":"2,16", "x":17.25, "y":2.25}, {"label":"3,0", "x":0, "y":3.25, "w":1.75}, {"label":"3,1", "x":1.75, "y":3.25}, {"label":"3,2", "x":2.75, "y":3.25}, {"label":"3,3", "x":3.75, "y":3.25}, {"label":"3,4", "x":4.75, "y":3.25}, {"label":"3,5", "x":5.75, "y":3.25}, {"label":"3,6", "x":6.75, "y":3.25}, {"label":"3,7", "x":7.75, "y":3.25}, {"label":"3,8", "x":8.75, "y":3.25}, {"label":"3,9", "x":9.75, "y":3.25}, {"label":"3,10", "x":10.75, "y":3.25}, {"label":"3,11", "x":11.75, "y":3.25}, {"label":"3,13", "x":12.75, "y":3.25, "w":2.25}, {"label":"4,0", "x":0, "y":4.25, "w":2.25}, {"label":"4,2", "x":2.25, "y":4.25}, {"label":"4,3", "x":3.25, "y":4.25}, {"label":"4,4", "x":4.25, "y":4.25}, {"label":"4,5", "x":5.25, "y":4.25}, {"label":"4,6", "x":6.25, "y":4.25}, {"label":"4,7", "x":7.25, "y":4.25}, {"label":"4,8", "x":8.25, "y":4.25}, {"label":"4,9", "x":9.25, "y":4.25}, {"label":"4,10", "x":10.25, "y":4.25}, {"label":"4,11", "x":11.25, "y":4.25}, {"label":"4,12", "x":12.25, "y":4.25, "w":2.75}, {"label":"4,15", "x":16.25, "y":4.25}, {"label":"5,0", "x":0, "y":5.25, "w":1.5}, {"label":"5,1", "x":1.5, "y":5.25}, {"label":"5,2", "x":2.5, "y":5.25, "w":1.5}, {"label":"5,6", "x":4, "y":5.25, "w":7}, {"label":"5,11", "x":11, "y":5.25, "w":1.5}, {"label":"5,12", "x":12.5, "y":5.25}, {"label":"5,13", "x":13.5, "y":5.25, "w":1.5}, {"label":"5,14", "x":15.25, "y":5.25}, {"label":"5,15", "x":16.25, "y":5.25}, {"label":"5,16", "x":17.25, "y":5.25}] diff --git a/keyboards/novelkeys/nk87b/rules.mk b/keyboards/novelkeys/nk87b/rules.mk index 230cc1ec14..96367c6a4c 100644 --- a/keyboards/novelkeys/nk87b/rules.mk +++ b/keyboards/novelkeys/nk87b/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = STM32F072 - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -v FFFF -p FFFF diff --git a/keyboards/novelkeys/novelpad/config.h b/keyboards/novelkeys/novelpad/config.h index fcbcf322f7..8f541ac856 100755 --- a/keyboards/novelkeys/novelpad/config.h +++ b/keyboards/novelkeys/novelpad/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -40,14 +39,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define BACKLIGHT_PIN B7 -//#define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 10 -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 4 @@ -74,43 +67,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -126,7 +87,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/novelkeys/novelpad/info.json b/keyboards/novelkeys/novelpad/info.json index 7e27f074b3..d08adfe99f 100644 --- a/keyboards/novelkeys/novelpad/info.json +++ b/keyboards/novelkeys/novelpad/info.json @@ -8,6 +8,9 @@ "pid": "0x6070", "device_version": "0.0.1" }, + "processor": "atmega32u2", + "bootloader": "atmel-dfu", + "community_layouts": ["ortho_5x4"], "layouts": { "LAYOUT_ortho_5x4": { "layout": [ diff --git a/keyboards/novelkeys/novelpad/rules.mk b/keyboards/novelkeys/novelpad/rules.mk index ecdb295257..40888f5a30 100755 --- a/keyboards/novelkeys/novelpad/rules.mk +++ b/keyboards/novelkeys/novelpad/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u2 - -# Bootloader selection -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # In-switch LEDs AUDIO_ENABLE = no # There is no available timer or pin for audio on the NovelPad RGBLIGHT_ENABLE = yes # RGB LEDs for underglow, installed and enabled by default for the NovelPad - -LAYOUTS = ortho_5x4 |