3 files changed, 3 insertions, 53 deletions
diff --git a/keyboards/novelkeys/nk1/config.h b/keyboards/novelkeys/nk1/config.h
index 1e86e1ec91..88b9c7abb8 100644
--- a/keyboards/novelkeys/nk1/config.h
+++ b/keyboards/novelkeys/nk1/config.h
@@ -17,7 +17,6 @@
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 1
@@ -28,50 +27,6 @@
     { D4 } \
 }
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
 #define RGB_DI_PIN F0
 #ifdef RGB_DI_PIN
     #define RGBLED_NUM 9
diff --git a/keyboards/novelkeys/nk1/info.json b/keyboards/novelkeys/nk1/info.json
index 79be14a48e..137608c978 100755
--- a/keyboards/novelkeys/nk1/info.json
+++ b/keyboards/novelkeys/nk1/info.json
@@ -8,6 +8,9 @@
         "pid": "0x4E4D",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "community_layouts": ["ortho_1x1"],
     "layouts": {
         "LAYOUT_ortho_1x1": {
             "layout": [{"x": 0, "y": 0}]
diff --git a/keyboards/novelkeys/nk1/rules.mk b/keyboards/novelkeys/nk1/rules.mk
index 16d3dfedd0..b851d0ab39 100644
--- a/keyboards/novelkeys/nk1/rules.mk
+++ b/keyboards/novelkeys/nk1/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -16,5 +10,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = ortho_1x1