summaryrefslogtreecommitdiff
path: root/keyboards/mlego/m60
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/mlego/m60')
-rw-r--r--keyboards/mlego/m60/config.h3
-rw-r--r--keyboards/mlego/m60/keymaps/default/keymap.c2
-rw-r--r--keyboards/mlego/m60/m60.c13
-rw-r--r--keyboards/mlego/m60/m60.h5
-rw-r--r--keyboards/mlego/m60/rev1/config.h25
-rw-r--r--keyboards/mlego/m60/rev1/ld/STM32F401xE.ld88
-rw-r--r--keyboards/mlego/m60/rev1/rules.mk5
7 files changed, 110 insertions, 31 deletions
diff --git a/keyboards/mlego/m60/config.h b/keyboards/mlego/m60/config.h
index 18c36671a9..abce0cb5f8 100644
--- a/keyboards/mlego/m60/config.h
+++ b/keyboards/mlego/m60/config.h
@@ -25,6 +25,9 @@
#define MATRIX_ROWS 5
#define MATRIX_COLS 12
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/mlego/m60/keymaps/default/keymap.c b/keyboards/mlego/m60/keymaps/default/keymap.c
index 8d0cddae80..dbfcad3152 100644
--- a/keyboards/mlego/m60/keymaps/default/keymap.c
+++ b/keyboards/mlego/m60/keymaps/default/keymap.c
@@ -64,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_ADJ] = LAYOUT_ortho_5x12(
- _______, QK_BOOT, _______, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_G, QK_BOOT, _______,
+ _______, QK_BOOT, _______, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_G, QK_BOOT, _______,
_______, _______, _______, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______,
_______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
diff --git a/keyboards/mlego/m60/m60.c b/keyboards/mlego/m60/m60.c
index cce37837c6..e5dba32cdf 100644
--- a/keyboards/mlego/m60/m60.c
+++ b/keyboards/mlego/m60/m60.c
@@ -15,16 +15,3 @@
*/
#include "m60.h"
-/*
-void keyboard_pre_init_kb(void){
-
- // Workaround for reversible pcb/mcu
- palSetLineMode(C13, PAL_MODE_INPUT_PULLUP);
- palSetLineMode(C15, PAL_MODE_INPUT_PULLUP);
- palSetLineMode(B7, PAL_MODE_OUTPUT_OPENDRAIN);
- palSetLineMode(A0, PAL_MODE_OUTPUT_OPENDRAIN);
- palSetLineMode(A1, PAL_MODE_OUTPUT_OPENDRAIN);
-
- keyboard_pre_init_user();
- }
-*/
diff --git a/keyboards/mlego/m60/m60.h b/keyboards/mlego/m60/m60.h
index 732b8d2e41..70cdbef69a 100644
--- a/keyboards/mlego/m60/m60.h
+++ b/keyboards/mlego/m60/m60.h
@@ -46,12 +46,7 @@ static inline void led_rse(const bool on) {
}
static inline void led_caps(const bool on) {
#ifdef LED_CAPS_LOCK_PIN
- if ((DEVICE_VER == 0x0001) || (DEVICE_VER == 0x0003)) {
writePin(LED_CAPS_LOCK_PIN, !on);
- }
- if (DEVICE_VER == 0x0002) {
- writePin(LED_CAPS_LOCK_PIN, on);
- }
#endif
}
diff --git a/keyboards/mlego/m60/rev1/config.h b/keyboards/mlego/m60/rev1/config.h
index c05f30813a..437e605149 100644
--- a/keyboards/mlego/m60/rev1/config.h
+++ b/keyboards/mlego/m60/rev1/config.h
@@ -18,9 +18,14 @@
#include "config_common.h"
/* USB Device descriptor parameter */
-#define PRODUCT_ID 0x0001
+#define PRODUCT_ID 0x6161
#define DEVICE_VER 0x0001
+#define LED_NUM_LOCK_PIN B12
+#define LED_SCROLL_LOCK_PIN B13
+#define LED_CAPS_LOCK_PIN C13
+
+#ifdef ENCODER_ENABLE
#define MATRIX_ROW_PINS \
{ A6, A7, B0, B1, B10 }
#define MATRIX_COL_PINS \
@@ -31,20 +36,13 @@
#define ENCODERS_PAD_B \
{ B8 }
-#define LED_NUM_LOCK_PIN B12
-#define LED_SCROLL_LOCK_PIN B13
-#define LED_CAPS_LOCK_PIN C13
+#endif
-#define RGB_DI_PIN B15
+#ifdef RGBLIGHT_ENABLE
-#define UNUSED_PINS
+#define RGB_DI_PIN B15
#define RGBLIGHT_LAYERS
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-#define MATRIX_IO_DELAY 5
-
#define RGBLED_NUM 20
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ -56,3 +54,8 @@
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
+#endif
+
+#define UNUSED_PINS
+// you want to comment this if using stm32-dfu as bootloader
+#define FEE_PAGE_BASE_ADDRESS 0x08008000
diff --git a/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld b/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld
new file mode 100644
index 0000000000..daec7d8583
--- /dev/null
+++ b/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld
@@ -0,0 +1,88 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * STM32F401xE memory setup.
+ */
+MEMORY
+{
+ flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
+ flash1 (rx) : org = 0x08004000, len = 16k
+ flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
+ flash3 (rx) : org = 0x0800C000, len = 16k
+ flash4 (rx) : org = 0x08010000, len = 512k - 64k
+ flash5 (rx) : org = 0x00000000, len = 0
+ flash6 (rx) : org = 0x00000000, len = 0
+ flash7 (rx) : org = 0x00000000, len = 0
+ ram0 (wx) : org = 0x20000000, len = 96k
+ ram1 (wx) : org = 0x00000000, len = 0
+ ram2 (wx) : org = 0x00000000, len = 0
+ ram3 (wx) : org = 0x00000000, len = 0
+ ram4 (wx) : org = 0x00000000, len = 0
+ ram5 (wx) : org = 0x00000000, len = 0
+ ram6 (wx) : org = 0x00000000, len = 0
+ ram7 (wx) : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+ and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash4);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash4);
+REGION_ALIAS("XTORS_FLASH_LMA", flash4);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash4);
+REGION_ALIAS("TEXT_FLASH_LMA", flash4);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash4);
+REGION_ALIAS("RODATA_FLASH_LMA", flash4);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash4);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+ of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+ the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash4);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
+
+/* TinyUF2 bootloader reset support */
+_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
diff --git a/keyboards/mlego/m60/rev1/rules.mk b/keyboards/mlego/m60/rev1/rules.mk
index a3ccf0102d..6b119a1f37 100644
--- a/keyboards/mlego/m60/rev1/rules.mk
+++ b/keyboards/mlego/m60/rev1/rules.mk
@@ -2,7 +2,10 @@
MCU = STM32F401
# Bootloader selection
-BOOTLOADER = stm32-dfu
+BOOTLOADER = tinyuf2
+#BOOTLOADER = stm32-dfu
+MCU_LDSCRIPT = STM32F401xE
+EEPROM_DRIVER = vendor
# Build Options
# change yes to no to disable