summaryrefslogtreecommitdiff
path: root/keyboards/mechlovin
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/mechlovin')
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev2/config.h13
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c2
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev3/config.h13
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c2
-rw-r--r--keyboards/mechlovin/delphine/rgb_led/config.h12
-rw-r--r--keyboards/mechlovin/delphine/rgb_led/rgb_led.c2
-rw-r--r--keyboards/mechlovin/hannah60rgb/rev2/config.h14
-rw-r--r--keyboards/mechlovin/hannah60rgb/rev2/rev2.c2
-rw-r--r--keyboards/mechlovin/hex6c/config.h3
-rw-r--r--keyboards/mechlovin/hex6c/info.json5
-rw-r--r--keyboards/mechlovin/infinity87/rgb_rev1/config.h11
-rw-r--r--keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c2
-rw-r--r--keyboards/mechlovin/olly/octagon/config.h11
-rw-r--r--keyboards/mechlovin/olly/octagon/octagon.c2
-rw-r--r--keyboards/mechlovin/zed60/config.h2
-rw-r--r--keyboards/mechlovin/zed65/910/config.h2
-rw-r--r--keyboards/mechlovin/zed65/mono_led/config.h11
-rw-r--r--keyboards/mechlovin/zed65/mono_led/mono_led.c2
-rw-r--r--keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h2
-rw-r--r--keyboards/mechlovin/zed65/rev1/config.h2
20 files changed, 35 insertions, 80 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
index d4b34ff48e..7e1bd43012 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
@@ -1,16 +1,9 @@
#pragma once
//rgb matrix setting
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b1110100
-#define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+#define DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_GND
+#define DRIVER_ADDR_2 IS31FL3731_I2C_ADDRESS_SDA
+#define IS31FL3731_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 32
#define DRIVER_2_LED_TOTAL 36
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
index e51e92ed6f..9e5fe11895 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
@@ -17,7 +17,7 @@
#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = {
{0, C2_1, C3_1, C4_1}, //D102-A0-0
{0, C5_1, C6_1, C7_1}, //D108-A1-1
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
index c4961c6492..039f3ffe81 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
@@ -17,20 +17,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define WS2812_SPI SPID1 // default: SPID1
+#define WS2812_SPI_DRIVER SPID1 // default: SPID1
#define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
#ifdef RGB_MATRIX_ENABLE
//rgb matrix setting
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b0110010
-#define DRIVER_COUNT 1
+#define DRIVER_ADDR_1 IS31FL3741_I2C_ADDRESS_SDA
+#define IS31FL3741_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 66
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
index b7e03d0f1e..b13f223a1c 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
@@ -17,7 +17,7 @@
#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = {
{0, CS3_SW5, CS2_SW5, CS1_SW5}, /* D9-K31-00 */
{0, CS6_SW5, CS5_SW5, CS4_SW5}, /* D46-K00-01 */
{0, CS6_SW9, CS5_SW9, CS4_SW9}, /* D59-K01-02 */
diff --git a/keyboards/mechlovin/delphine/rgb_led/config.h b/keyboards/mechlovin/delphine/rgb_led/config.h
index 9498e8914f..66455e1158 100644
--- a/keyboards/mechlovin/delphine/rgb_led/config.h
+++ b/keyboards/mechlovin/delphine/rgb_led/config.h
@@ -1,14 +1,8 @@
#pragma once
-//rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b1110110
-#define DRIVER_COUNT 1
+//rgb matrix setting
+#define DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_SDA
+#define IS31FL3731_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 25
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
diff --git a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c
index 02a011ba4b..a55143f2e1 100644
--- a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c
+++ b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c
@@ -18,7 +18,7 @@
#ifdef RGB_MATRIX_ENABLE
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = {
// left CA
{0, C5_2, C6_2, C7_2}, //D2-0
{0, C1_1, C3_2, C4_2}, //D20-1
diff --git a/keyboards/mechlovin/hannah60rgb/rev2/config.h b/keyboards/mechlovin/hannah60rgb/rev2/config.h
index 7e9a918493..5c7bb7abfe 100644
--- a/keyboards/mechlovin/hannah60rgb/rev2/config.h
+++ b/keyboards/mechlovin/hannah60rgb/rev2/config.h
@@ -1,15 +1,9 @@
#pragma once
-//rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b1110100
-#define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+//rgb matrix setting
+#define DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_GND
+#define DRIVER_ADDR_2 IS31FL3731_I2C_ADDRESS_SDA
+#define IS31FL3731_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 44
#define DRIVER_2_LED_TOTAL 34
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
diff --git a/keyboards/mechlovin/hannah60rgb/rev2/rev2.c b/keyboards/mechlovin/hannah60rgb/rev2/rev2.c
index 246caa2963..2e3c8d0090 100644
--- a/keyboards/mechlovin/hannah60rgb/rev2/rev2.c
+++ b/keyboards/mechlovin/hannah60rgb/rev2/rev2.c
@@ -17,7 +17,7 @@
#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
diff --git a/keyboards/mechlovin/hex6c/config.h b/keyboards/mechlovin/hex6c/config.h
index 4cfcaebcde..e74e7939c4 100644
--- a/keyboards/mechlovin/hex6c/config.h
+++ b/keyboards/mechlovin/hex6c/config.h
@@ -18,6 +18,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#define BACKLIGHT_PWM_DRIVER PWMD3
-
-#define WEAR_LEVELING_BACKING_SIZE 4096
-#define WEAR_LEVELING_LOGICAL_SIZE 2048
diff --git a/keyboards/mechlovin/hex6c/info.json b/keyboards/mechlovin/hex6c/info.json
index dfeb91e0ba..483566e7f4 100644
--- a/keyboards/mechlovin/hex6c/info.json
+++ b/keyboards/mechlovin/hex6c/info.json
@@ -13,6 +13,11 @@
"rows": ["A10", "B13", "B12", "B11", "C14", "C15"]
},
"diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
"encoder": {
"rotary": [
{"pin_a": "A15", "pin_b": "A2"}
diff --git a/keyboards/mechlovin/infinity87/rgb_rev1/config.h b/keyboards/mechlovin/infinity87/rgb_rev1/config.h
index 10fc42f830..9777e290bb 100644
--- a/keyboards/mechlovin/infinity87/rgb_rev1/config.h
+++ b/keyboards/mechlovin/infinity87/rgb_rev1/config.h
@@ -17,13 +17,6 @@
#pragma once
//rgb matrix setting
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b0110000 AD <-> GND
-// 0b0110011 AD <-> VCC
-// 0b0110001 AD <-> SCL
-// 0b0110010 AD <-> SDA
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_KEYPRESSES
#undef ENABLE_RGB_MATRIX_SPLASH
@@ -80,7 +73,7 @@
//#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
//#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#define DRIVER_ADDR_1 0b0110010
-#define DRIVER_COUNT 1
+#define DRIVER_ADDR_1 IS31FL3741_I2C_ADDRESS_SDA
+#define IS31FL3741_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 91
#define DRIVER_INDICATOR_LED_TOTAL 0
diff --git a/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c b/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c
index c10d47d191..5649f80712 100644
--- a/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c
+++ b/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c
@@ -17,7 +17,7 @@
#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = {
{0, CS34_SW1, CS35_SW1, CS36_SW1}, //D92-K00-0
{0, CS37_SW1, CS38_SW1, CS39_SW1}, //D94-K01-1
{0, CS31_SW1, CS32_SW1, CS33_SW1}, //D96-K02-2
diff --git a/keyboards/mechlovin/olly/octagon/config.h b/keyboards/mechlovin/olly/octagon/config.h
index 4e502b6154..573a11f88f 100644
--- a/keyboards/mechlovin/olly/octagon/config.h
+++ b/keyboards/mechlovin/olly/octagon/config.h
@@ -18,18 +18,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#ifdef LED_MATRIX_ENABLE
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define LED_DRIVER_ADDR_1 0b1110110
+#define LED_DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_SDA
#define I2C_DRIVER I2CD2
#define I2C1_SCL_PIN B10
#define I2C1_SDA_PIN B11
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
#define LED_MATRIX_LED_COUNT 94
#define LED_MATRIX_KEYPRESSES // reacts to keypresses
#define LED_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
diff --git a/keyboards/mechlovin/olly/octagon/octagon.c b/keyboards/mechlovin/olly/octagon/octagon.c
index 41f9dbb438..b5eb828bc8 100644
--- a/keyboards/mechlovin/olly/octagon/octagon.c
+++ b/keyboards/mechlovin/olly/octagon/octagon.c
@@ -16,7 +16,7 @@
#include "quantum.h"
-const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT] = {
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[LED_MATRIX_LED_COUNT] = {
/* Refer to IS31 manual for these locations
* driver
* | LED address
diff --git a/keyboards/mechlovin/zed60/config.h b/keyboards/mechlovin/zed60/config.h
index cdbbd6dd0e..13e17a7bb6 100644
--- a/keyboards/mechlovin/zed60/config.h
+++ b/keyboards/mechlovin/zed60/config.h
@@ -17,5 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define WS2812_SPI SPID1 // default: SPID1
+#define WS2812_SPI_DRIVER SPID1 // default: SPID1
#define WS2812_SPI_MOSI_PAL_MODE 6 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
diff --git a/keyboards/mechlovin/zed65/910/config.h b/keyboards/mechlovin/zed65/910/config.h
index a5902fa9c1..f21653f5af 100644
--- a/keyboards/mechlovin/zed65/910/config.h
+++ b/keyboards/mechlovin/zed65/910/config.h
@@ -17,5 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define WS2812_SPI SPID1 // default: SPID1
+#define WS2812_SPI_DRIVER SPID1 // default: SPID1
#define WS2812_SPI_MOSI_PAL_MODE 6 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
diff --git a/keyboards/mechlovin/zed65/mono_led/config.h b/keyboards/mechlovin/zed65/mono_led/config.h
index 1ec1746456..65f9ba2a94 100644
--- a/keyboards/mechlovin/zed65/mono_led/config.h
+++ b/keyboards/mechlovin/zed65/mono_led/config.h
@@ -18,18 +18,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#ifdef LED_MATRIX_ENABLE
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define LED_DRIVER_ADDR_1 0b1110110
+#define LED_DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_SDA
#define I2C_DRIVER I2CD2
#define I2C1_SCL_PIN B10
#define I2C1_SDA_PIN B11
-#define LED_DRIVER_COUNT 1
+#define IS31FL3731_DRIVER_COUNT 1
#define LED_MATRIX_LED_COUNT 70
#define LED_MATRIX_KEYPRESSES // reacts to keypresses
#define LED_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
diff --git a/keyboards/mechlovin/zed65/mono_led/mono_led.c b/keyboards/mechlovin/zed65/mono_led/mono_led.c
index e618d41489..f66c4b1359 100644
--- a/keyboards/mechlovin/zed65/mono_led/mono_led.c
+++ b/keyboards/mechlovin/zed65/mono_led/mono_led.c
@@ -19,7 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
-const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT] = {
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[LED_MATRIX_LED_COUNT] = {
/* Refer to IS31 manual for these locations
* driver
* | LED address
diff --git a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
index 5cb2a00b88..3bec308941 100644
--- a/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
+++ b/keyboards/mechlovin/zed65/no_backlight/wearhaus66/config.h
@@ -17,5 +17,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define WS2812_SPI SPID2 // default: SPID1
+#define WS2812_SPI_DRIVER SPID2 // default: SPID1
#define WS2812_SPI_MOSI_PAL_MODE 0 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
diff --git a/keyboards/mechlovin/zed65/rev1/config.h b/keyboards/mechlovin/zed65/rev1/config.h
index 24efedfffb..4ed1992992 100644
--- a/keyboards/mechlovin/zed65/rev1/config.h
+++ b/keyboards/mechlovin/zed65/rev1/config.h
@@ -18,7 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#ifdef RGBLIGHT_ENABLE
-#define WS2812_SPI SPID1 // default: SPID1
+#define WS2812_SPI_DRIVER SPID1 // default: SPID1
#define WS2812_SPI_MOSI_PAL_MODE 6 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
#define WS2812_SPI_USE_CIRCULAR_BUFFER
#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 16:17:14 +0000