summaryrefslogtreecommitdiff
path: root/keyboards/mechlovin/adelais
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/mechlovin/adelais')
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev2/config.h13
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c2
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev3/config.h13
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c2
4 files changed, 8 insertions, 22 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
index d4b34ff48e..ec29cdc48e 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
@@ -1,16 +1,9 @@
#pragma once
//rgb matrix setting
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b1110100
-#define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
+#define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA
+#define IS31FL3731_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 32
#define DRIVER_2_LED_TOTAL 36
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
index e51e92ed6f..9e5fe11895 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c
@@ -17,7 +17,7 @@
#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = {
{0, C2_1, C3_1, C4_1}, //D102-A0-0
{0, C5_1, C6_1, C7_1}, //D108-A1-1
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
index c4961c6492..48f585e765 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
@@ -17,20 +17,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#define WS2812_SPI SPID1 // default: SPID1
+#define WS2812_SPI_DRIVER SPID1 // default: SPID1
#define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
#ifdef RGB_MATRIX_ENABLE
//rgb matrix setting
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b0110010
-#define DRIVER_COUNT 1
+#define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_SDA
+#define IS31FL3741_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 66
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
index b7e03d0f1e..b13f223a1c 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
@@ -17,7 +17,7 @@
#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = {
{0, CS3_SW5, CS2_SW5, CS1_SW5}, /* D9-K31-00 */
{0, CS6_SW5, CS5_SW5, CS4_SW5}, /* D46-K00-01 */
{0, CS6_SW9, CS5_SW9, CS4_SW9}, /* D59-K01-02 */