diff options
Diffstat (limited to 'keyboards/mechlovin/adelais/rgb_led')
5 files changed, 16 insertions, 15 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h index 1e549f9a89..088c29a048 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h @@ -1,6 +1,5 @@ #pragma once -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -11,9 +10,6 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 //rgb matrix setting // This is a 7-bit address, that gets left-shifted and bit 0 @@ -86,5 +82,3 @@ # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define RGB_MATRIX_DISABLE_KEYCODES - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json index 4ac693f894..c7e662c008 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/info.json +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/info.json @@ -16,6 +16,14 @@ {"pin_a": "A4", "pin_b": "A3"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 23 + }, "ws2812": { "pin": "A15" }, diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h index c4f801b40d..3c514668d1 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGBLIGHT_ENABLE #define WS2812_SPI SPID1 // default: SPID1 #define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 -#define RGBLED_NUM 23 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD #define RGBLIGHT_EFFECT_RAINBOW_SWIRL @@ -31,9 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 #endif #ifdef RGB_MATRIX_ENABLE @@ -108,5 +104,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 #endif - -#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json index d1775ccb83..d745503c27 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/info.json +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/info.json @@ -16,6 +16,9 @@ {"pin_a": "B12", "pin_b": "B13"} ] }, + "qmk": { + "tap_keycode_delay": 10 + }, "processor": "STM32F103", "bootloader": "stm32duino", "indicators": { @@ -23,6 +26,11 @@ "num_lock": "A0", "scroll_lock": "C15" }, + "rgblight": { + "saturation_steps": 8, + "brightness_steps": 8, + "led_count": 23 + }, "ws2812": { "pin": "A7", "driver": "spi" diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk index 5664ce6844..e144301381 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk @@ -6,6 +6,3 @@ RGBLIGHT_ENABLE = yes ENCODER_ENABLE = yes CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration - -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
\ No newline at end of file |