2 files changed, 5 insertions, 19 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
index d4b34ff48e..7e1bd43012 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h
@@ -1,16 +1,9 @@
 #pragma once
 
 //rgb matrix setting
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b1110100
-#define DRIVER_ADDR_2 0b1110110
-#define DRIVER_COUNT 2
+#define DRIVER_ADDR_1 IS31FL3731_I2C_ADDRESS_GND
+#define DRIVER_ADDR_2 IS31FL3731_I2C_ADDRESS_SDA
+#define IS31FL3731_DRIVER_COUNT 2
 #define DRIVER_1_LED_TOTAL 32
 #define DRIVER_2_LED_TOTAL 36
 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
index c4961c6492..72011af8df 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
@@ -22,15 +22,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGB_MATRIX_ENABLE
 //rgb matrix setting
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 0b1110100 AD <-> GND
-// 0b1110111 AD <-> VCC
-// 0b1110101 AD <-> SCL
-// 0b1110110 AD <-> SDA
-#define DRIVER_ADDR_1 0b0110010
-#define DRIVER_COUNT 1
+#define DRIVER_ADDR_1 IS31FL3741_I2C_ADDRESS_SDA
+#define IS31FL3741_DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 66
 
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses