diff options
Diffstat (limited to 'keyboards/mechlovin/adelais/rgb_led/rev3')
| -rw-r--r-- | keyboards/mechlovin/adelais/rgb_led/rev3/config.h | 13 | ||||
| -rw-r--r-- | keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c | 2 |
2 files changed, 4 insertions, 11 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h index c4961c6492..039f3ffe81 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h @@ -17,20 +17,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#define WS2812_SPI SPID1 // default: SPID1 +#define WS2812_SPI_DRIVER SPID1 // default: SPID1 #define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 #ifdef RGB_MATRIX_ENABLE //rgb matrix setting -// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -// The address will vary depending on your wiring: -// 0b1110100 AD <-> GND -// 0b1110111 AD <-> VCC -// 0b1110101 AD <-> SCL -// 0b1110110 AD <-> SDA -#define DRIVER_ADDR_1 0b0110010 -#define DRIVER_COUNT 1 +#define DRIVER_ADDR_1 IS31FL3741_I2C_ADDRESS_SDA +#define IS31FL3741_DRIVER_COUNT 1 #define RGB_MATRIX_LED_COUNT 66 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c index b7e03d0f1e..b13f223a1c 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c @@ -17,7 +17,7 @@ #include "quantum.h" #ifdef RGB_MATRIX_ENABLE -const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = { {0, CS3_SW5, CS2_SW5, CS1_SW5}, /* D9-K31-00 */ {0, CS6_SW5, CS5_SW5, CS4_SW5}, /* D46-K00-01 */ {0, CS6_SW9, CS5_SW9, CS4_SW9}, /* D59-K01-02 */ |