summaryrefslogtreecommitdiff
path: root/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/mechlovin/adelais/rgb_led/rev3/config.h')
-rw-r--r--keyboards/mechlovin/adelais/rgb_led/rev3/config.h75
1 files changed, 75 insertions, 0 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
new file mode 100644
index 0000000000..5b3a8e8250
--- /dev/null
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
@@ -0,0 +1,75 @@
+/*
+Copyright 2021 Mechlovin' Studio
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT_ID 0xAEC3
+#define PRODUCT Adelais En Ciel Rev3
+
+#define MATRIX_ROW_PINS { A4, A3, C13, A1, A2}
+#define MATRIX_COL_PINS { B10, B11, B2, B1, B0, A6, A5, A14, A13, A15, B3, B4, B5, B8, B9 }
+
+#define RGB_DI_PIN A7
+#define WS2812_SPI SPID1 // default: SPID1
+#define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
+#define RGBLED_NUM 23
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+//rgb matrix setting
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define DRIVER_ADDR_1 0b0110010
+#define DRIVER_COUNT 1
+#define DRIVER_LED_TOTAL 66
+#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
+
+#define RGB_MATRIX_DISABLE_KEYCODES
+
+#define ENCODERS_PAD_A { B12 }
+#define ENCODERS_PAD_B { B13 }
+#define ENCODER_RESOLUTION 4
+
+#define TAP_CODE_DELAY 10
+
+
+#define LED_NUM_LOCK_PIN A0
+#define LED_CAPS_LOCK_PIN C14
+#define LED_SCROLL_LOCK_PIN C15 \ No newline at end of file