3 files changed, 6 insertions, 57 deletions
diff --git a/keyboards/mechkeys/mk60/config.h b/keyboards/mechkeys/mk60/config.h
index 0e1836c4a9..9b39355f47 100644
--- a/keyboards/mechkeys/mk60/config.h
+++ b/keyboards/mechkeys/mk60/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -39,14 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-#define LED_CAPS_LOCK_PIN B7
-#define LED_PIN_ON_STATE 0
-
 #define BACKLIGHT_PIN B6
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 6
@@ -71,45 +58,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -125,7 +78,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/mechkeys/mk60/info.json b/keyboards/mechkeys/mk60/info.json
index b322a589ab..b78e144988 100644
--- a/keyboards/mechkeys/mk60/info.json
+++ b/keyboards/mechkeys/mk60/info.json
@@ -8,6 +8,12 @@
       "pid": "0x0000",
       "device_version": "0.0.1"
     },
+    "indicators": {
+      "caps_lock": "B7",
+      "on_state": 0
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
       "LAYOUT": {
         "layout": [
diff --git a/keyboards/mechkeys/mk60/rules.mk b/keyboards/mechkeys/mk60/rules.mk
index 3ca912f6ec..0922d3d511 100644
--- a/keyboards/mechkeys/mk60/rules.mk
+++ b/keyboards/mechkeys/mk60/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #