diff options
Diffstat (limited to 'keyboards/massdrop')
28 files changed, 4040 insertions, 0 deletions
diff --git a/keyboards/massdrop/alt/alt.h b/keyboards/massdrop/alt/alt.h new file mode 100644 index 0000000000..8dfed8d2d6 --- /dev/null +++ b/keyboards/massdrop/alt/alt.h @@ -0,0 +1,34 @@ +#pragma once + +#include "quantum.h" +#include "config_led.h" +#include "matrix.h" + +#include "i2c_master.h" +#include "led_matrix.h" //For led keycodes +#include "usb/udi_cdc.h" +#include "usb/usb2422.h" + +#define LAYOUT( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \ + K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, \ + K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K60, \ + K61, K62, K63, K64, K65, K66, K67 \ +) { \ + { K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, }, \ + { K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, }, \ + { K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, KC_NO, K43, K44, }, \ + { K45, KC_NO, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, }, \ + { K59, K60, K61, KC_NO, KC_NO, KC_NO, K62, KC_NO, KC_NO, KC_NO, K63, K64, K65, K66, K67, }, \ +} + +#define TOGGLE_FLAG_AND_PRINT(var, name) { \ + if (var) { \ + dprintf(name " disabled\r\n"); \ + var = !var; \ + } else { \ + var = !var; \ + dprintf(name " enabled\r\n"); \ + } \ + } diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h new file mode 100644 index 0000000000..660d44421b --- /dev/null +++ b/keyboards/massdrop/alt/config.h @@ -0,0 +1,126 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xEED3 +#define DEVICE_VER 0x0101 + +#define MANUFACTURER "Massdrop Inc." +#define PRODUCT "ALT Keyboard" +#define SERIAL_NUM "Unavailable" + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* MCU Port name definitions */ +#define PA 0 +#define PB 1 + +/* Port and Pin definition of key row hardware configuration */ +#define MATRIX_ROW_PORTS PA, PA, PA, PA, PA +#define MATRIX_ROW_PINS 0, 1, 2, 3, 4 + +/* Port and Pin definition of key column hardware configuration */ +#define MATRIX_COL_PORTS PB, PB, PB, PB, PB, PB, PB, PB, PB, PB, PA, PA, PA, PA, PA +#define MATRIX_COL_PINS 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 5, 6, 7, 10, 11 + +/* This Shift Register expands available hardware output lines to control additional peripherals */ +/* It uses four lines from the MCU to provide 16 output lines */ +/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */ +#define SR_EXP_RCLK_PORT PB +#define SR_EXP_RCLK_PIN 14 +/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */ +#define SR_EXP_OE_N_PORT PB +#define SR_EXP_OE_N_PIN 15 +/* SERCOM port to use for Shift Register SPI */ +/* DATAOUT and SCLK must be configured to use hardware pins of this port */ +#define SR_EXP_SERCOM SERCOM2 +/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */ +#define SR_EXP_DATAOUT_PORT PA +#define SR_EXP_DATAOUT_PIN 12 +#define SR_EXP_DATAOUT_MUX 2 +/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */ +#define SR_EXP_SCLK_PORT PA +#define SR_EXP_SCLK_PIN 13 +#define SR_EXP_SCLK_MUX 2 + +/* Debug LED (Small LED Located near MCU) */ +#define DEBUG_LED_ENABLE 1 +#define DEBUG_LED_PORT PA +#define DEBUG_LED_PIN 27 + +/* Additional debugging ports */ +/* PCB M21 */ +#define DEBUG_PORT1_ENABLE 1 +#define DEBUG_PORT1_PORT PB +#define DEBUG_PORT1_PIN 3 +/* PCB M23 */ +#define DEBUG_PORT2_ENABLE 1 +#define DEBUG_PORT2_PORT PB +#define DEBUG_PORT2_PIN 17 +/* PCB M25 */ +#define DEBUG_PORT3_ENABLE 1 +#define DEBUG_PORT3_PORT PA +#define DEBUG_PORT3_PIN 20 + +/* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */ +/* This is useful in determining which hardware device may have malfunctioned or is improperly configured */ +/* Feature is automatically disabled after successful boot */ +/* PCB M27 */ +#define DEBUG_BOOT_TRACING_ENABLE 1 +#define DEBUG_BOOT_TRACING_PORT PB +#define DEBUG_BOOT_TRACING_PIN 23 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Force boot in NKRO mode */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/massdrop/alt/config_led.h b/keyboards/massdrop/alt/config_led.h new file mode 100644 index 0000000000..a049e38179 --- /dev/null +++ b/keyboards/massdrop/alt/config_led.h @@ -0,0 +1,178 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _config_led_h_ +#define _config_led_h_ + +//Define number of ISSI3733 drivers being used (1...16) +#define ISSI3733_DRIVER_COUNT 2 + +//Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic) +#define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE } + +//LED I2C bus speed +#define I2C_HZ 580000 + +//Count of LED bodies +#define ISSI3733_LED_COUNT 105 + +//Default Global Current Register value (Default brightness 0 - 255) +#define ISSI3733_GCR_DEFAULT 128 + +#define LED_GCR_MAX 165 //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus +#define LED_GCR_STEP 10 //GCR increment/decrement value + +//Automatic power rollback and recovery +#define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power ) +#define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit) +#define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down) + +#define ANIMATION_SPEED_STEP 1 + +#define BREATHE_MIN_STEP 0 +#define BREATHE_MAX_STEP 255 + +//LED Mapping - More practically generated from a spreadsheet program +//id: ID of the LED (Sync with PCB callouts) +//x: Physical X coordinate of LED (units do not matter) +//y: Physical Y coordinate of LED (units do not matter) +//drv: 1-Based index of ISSI3773_DRIVER_ADDRESSES +//cs: Matrix wiring CS col (1-16) +//swr: Matrix wiring SW Red row (1-12) +//swg: Matrix wiring SW Green row (1-12) +//swb: Matrix wiring SW Blue row (1-12) +//scan: Associated key scancode if any +//Note: Origin 0,0 may be located anywhere as the software will do the final layout +#define ISSI3733_LED_MAP { \ + { .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \ + { .id = 2, .x = 0.75, .y = 0, .adr = { .drv = 2, .cs = 3, .swr = 5, .swg = 4, .swb = 6 }, .scan = 1 }, \ + { .id = 3, .x = 1.5, .y = 0, .adr = { .drv = 2, .cs = 4, .swr = 5, .swg = 4, .swb = 6 }, .scan = 2 }, \ + { .id = 4, .x = 2.25, .y = 0, .adr = { .drv = 2, .cs = 5, .swr = 5, .swg = 4, .swb = 6 }, .scan = 3 }, \ + { .id = 5, .x = 3, .y = 0, .adr = { .drv = 2, .cs = 6, .swr = 5, .swg = 4, .swb = 6 }, .scan = 4 }, \ + { .id = 6, .x = 3.75, .y = 0, .adr = { .drv = 2, .cs = 7, .swr = 5, .swg = 4, .swb = 6 }, .scan = 5 }, \ + { .id = 7, .x = 4.5, .y = 0, .adr = { .drv = 2, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 6 }, \ + { .id = 8, .x = 5.25, .y = 0, .adr = { .drv = 2, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 7 }, \ + { .id = 9, .x = 6, .y = 0, .adr = { .drv = 1, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 8 }, \ + { .id = 10, .x = 6.75, .y = 0, .adr = { .drv = 1, .cs = 2, .swr = 5, .swg = 4, .swb = 6 }, .scan = 9 }, \ + { .id = 11, .x = 7.5, .y = 0, .adr = { .drv = 1, .cs = 3, .swr = 5, .swg = 4, .swb = 6 }, .scan = 10 }, \ + { .id = 12, .x = 8.25, .y = 0, .adr = { .drv = 1, .cs = 4, .swr = 5, .swg = 4, .swb = 6 }, .scan = 11 }, \ + { .id = 13, .x = 9, .y = 0, .adr = { .drv = 1, .cs = 5, .swr = 5, .swg = 4, .swb = 6 }, .scan = 12 }, \ + { .id = 14, .x = 10.125, .y = 0, .adr = { .drv = 1, .cs = 6, .swr = 5, .swg = 4, .swb = 6 }, .scan = 13 }, \ + { .id = 15, .x = 11.25, .y = 0, .adr = { .drv = 1, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 14 }, \ + { .id = 16, .x = 0.188, .y = -0.75, .adr = { .drv = 2, .cs = 2, .swr = 5, .swg = 4, .swb = 6 }, .scan = 15 }, \ + { .id = 17, .x = 1.125, .y = -0.75, .adr = { .drv = 2, .cs = 3, .swr = 8, .swg = 7, .swb = 9 }, .scan = 16 }, \ + { .id = 18, .x = 1.875, .y = -0.75, .adr = { .drv = 2, .cs = 4, .swr = 8, .swg = 7, .swb = 9 }, .scan = 17 }, \ + { .id = 19, .x = 2.625, .y = -0.75, .adr = { .drv = 2, .cs = 5, .swr = 8, .swg = 7, .swb = 9 }, .scan = 18 }, \ + { .id = 20, .x = 3.375, .y = -0.75, .adr = { .drv = 2, .cs = 6, .swr = 8, .swg = 7, .swb = 9 }, .scan = 19 }, \ + { .id = 21, .x = 4.125, .y = -0.75, .adr = { .drv = 2, .cs = 7, .swr = 8, .swg = 7, .swb = 9 }, .scan = 20 }, \ + { .id = 22, .x = 4.875, .y = -0.75, .adr = { .drv = 2, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 21 }, \ + { .id = 23, .x = 5.625, .y = -0.75, .adr = { .drv = 1, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 22 }, \ + { .id = 24, .x = 6.375, .y = -0.75, .adr = { .drv = 1, .cs = 2, .swr = 8, .swg = 7, .swb = 9 }, .scan = 23 }, \ + { .id = 25, .x = 7.125, .y = -0.75, .adr = { .drv = 1, .cs = 3, .swr = 8, .swg = 7, .swb = 9 }, .scan = 24 }, \ + { .id = 26, .x = 7.875, .y = -0.75, .adr = { .drv = 1, .cs = 4, .swr = 8, .swg = 7, .swb = 9 }, .scan = 25 }, \ + { .id = 27, .x = 8.625, .y = -0.75, .adr = { .drv = 1, .cs = 5, .swr = 8, .swg = 7, .swb = 9 }, .scan = 26 }, \ + { .id = 28, .x = 9.375, .y = -0.75, .adr = { .drv = 1, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 27 }, \ + { .id = 29, .x = 10.313, .y = -0.75, .adr = { .drv = 1, .cs = 6, .swr = 8, .swg = 7, .swb = 9 }, .scan = 28 }, \ + { .id = 30, .x = 11.25, .y = -0.75, .adr = { .drv = 1, .cs = 7, .swr = 5, .swg = 4, .swb = 6 }, .scan = 29 }, \ + { .id = 31, .x = 0.281, .y = -1.5, .adr = { .drv = 2, .cs = 2, .swr = 8, .swg = 7, .swb = 9 }, .scan = 30 }, \ + { .id = 32, .x = 1.313, .y = -1.5, .adr = { .drv = 2, .cs = 3, .swr = 11, .swg = 10, .swb = 12 }, .scan = 31 }, \ + { .id = 33, .x = 2.063, .y = -1.5, .adr = { .drv = 2, .cs = 4, .swr = 11, .swg = 10, .swb = 12 }, .scan = 32 }, \ + { .id = 34, .x = 2.813, .y = -1.5, .adr = { .drv = 2, .cs = 5, .swr = 11, .swg = 10, .swb = 12 }, .scan = 33 }, \ + { .id = 35, .x = 3.563, .y = -1.5, .adr = { .drv = 2, .cs = 6, .swr = 11, .swg = 10, .swb = 12 }, .scan = 34 }, \ + { .id = 36, .x = 4.313, .y = -1.5, .adr = { .drv = 2, .cs = 7, .swr = 11, .swg = 10, .swb = 12 }, .scan = 35 }, \ + { .id = 37, .x = 5.063, .y = -1.5, .adr = { .drv = 2, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 36 }, \ + { .id = 38, .x = 5.813, .y = -1.5, .adr = { .drv = 1, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 37 }, \ + { .id = 39, .x = 6.563, .y = -1.5, .adr = { .drv = 1, .cs = 2, .swr = 11, .swg = 10, .swb = 12 }, .scan = 38 }, \ + { .id = 40, .x = 7.313, .y = -1.5, .adr = { .drv = 1, .cs = 3, .swr = 11, .swg = 10, .swb = 12 }, .scan = 39 }, \ + { .id = 41, .x = 8.063, .y = -1.5, .adr = { .drv = 1, .cs = 4, .swr = 11, .swg = 10, .swb = 12 }, .scan = 40 }, \ + { .id = 42, .x = 8.813, .y = -1.5, .adr = { .drv = 1, .cs = 5, .swr = 11, .swg = 10, .swb = 12 }, .scan = 41 }, \ + { .id = 43, .x = 10.031, .y = -1.5, .adr = { .drv = 1, .cs = 6, .swr = 11, .swg = 10, .swb = 12 }, .scan = 43 }, \ + { .id = 44, .x = 11.25, .y = -1.5, .adr = { .drv = 1, .cs = 7, .swr = 8, .swg = 7, .swb = 9 }, .scan = 44 }, \ + { .id = 45, .x = 0.469, .y = -2.25, .adr = { .drv = 2, .cs = 2, .swr = 11, .swg = 10, .swb = 12 }, .scan = 45 }, \ + { .id = 46, .x = 1.688, .y = -2.25, .adr = { .drv = 2, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 47 }, \ + { .id = 47, .x = 2.438, .y = -2.25, .adr = { .drv = 2, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 48 }, \ + { .id = 48, .x = 3.188, .y = -2.25, .adr = { .drv = 2, .cs = 9, .swr = 11, .swg = 10, .swb = 12 }, .scan = 49 }, \ + { .id = 49, .x = 3.938, .y = -2.25, .adr = { .drv = 2, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 50 }, \ + { .id = 50, .x = 4.688, .y = -2.25, .adr = { .drv = 2, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 51 }, \ + { .id = 51, .x = 5.438, .y = -2.25, .adr = { .drv = 2, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 52 }, \ + { .id = 52, .x = 6.188, .y = -2.25, .adr = { .drv = 1, .cs = 9, .swr = 11, .swg = 10, .swb = 12 }, .scan = 53 }, \ + { .id = 53, .x = 6.938, .y = -2.25, .adr = { .drv = 1, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 54 }, \ + { .id = 54, .x = 7.688, .y = -2.25, .adr = { .drv = 1, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 55 }, \ + { .id = 55, .x = 8.438, .y = -2.25, .adr = { .drv = 1, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 56 }, \ + { .id = 56, .x = 9.469, .y = -2.25, .adr = { .drv = 1, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 57 }, \ + { .id = 57, .x = 10.5, .y = -2.25, .adr = { .drv = 1, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 58 }, \ + { .id = 58, .x = 11.25, .y = -2.25, .adr = { .drv = 1, .cs = 7, .swr = 11, .swg = 10, .swb = 12 }, .scan = 59 }, \ + { .id = 59, .x = 0.094, .y = -3, .adr = { .drv = 2, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 60 }, \ + { .id = 60, .x = 1.031, .y = -3, .adr = { .drv = 2, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 61 }, \ + { .id = 61, .x = 1.969, .y = -3, .adr = { .drv = 2, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 62 }, \ + { .id = 62, .x = 4.781, .y = -3, .adr = { .drv = 2, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 66 }, \ + { .id = 63, .x = 7.594, .y = -3, .adr = { .drv = 1, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 70 }, \ + { .id = 64, .x = 8.531, .y = -3, .adr = { .drv = 1, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 71 }, \ + { .id = 65, .x = 9.75, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 72 }, \ + { .id = 66, .x = 10.5, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 73 }, \ + { .id = 67, .x = 11.25, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 74 }, \ + { .id = 68, .x = -0.338, .y = -3.338, .adr = { .drv = 2, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 69, .x = 0.39, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 70, .x = 1.263, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 71, .x = 2.135, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 72, .x = 3.008, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 73, .x = 3.88, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 74, .x = 4.753, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 75, .x = 5.625, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 76, .x = 6.497, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 77, .x = 7.37, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 78, .x = 8.242, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 79, .x = 9.115, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 80, .x = 9.987, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 81, .x = 10.86, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 82, .x = 11.588, .y = -3.338, .adr = { .drv = 1, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 83, .x = 11.693, .y = -2.623, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 84, .x = 11.693, .y = -1.873, .adr = { .drv = 1, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 85, .x = 11.693, .y = -1.123, .adr = { .drv = 1, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 86, .x = 11.693, .y = -0.373, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 87, .x = 11.588, .y = 0.338, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 88, .x = 9.908, .y = 0.443, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 89, .x = 9.288, .y = 0.443, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 90, .x = 8.625, .y = 0.443, .adr = { .drv = 1, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 91, .x = 7.875, .y = 0.443, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 92, .x = 7.125, .y = 0.443, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 93, .x = 6.375, .y = 0.443, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 94, .x = 5.625, .y = 0.443, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 95, .x = 4.875, .y = 0.443, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 96, .x = 4.125, .y = 0.443, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 97, .x = 3.375, .y = 0.443, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 98, .x = 2.625, .y = 0.443, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 99, .x = 1.875, .y = 0.443, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 100, .x = 1.125, .y = 0.443, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 101, .x = -0.338, .y = 0.338, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 102, .x = -0.443, .y = -0.373, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 103, .x = -0.443, .y = -1.123, .adr = { .drv = 2, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 104, .x = -0.443, .y = -1.873, .adr = { .drv = 2, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 105, .x = -0.443, .y = -2.623, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ +}; + + +#define USB_LED_INDICATOR_ENABLE //Comment out to disable indicator functionality +#ifdef USB_LED_INDICATOR_ENABLE //Scan codes refer to actual key matrix codes, not KC_* (255 to disable) + #define USB_LED_NUM_LOCK_SCANCODE 255 + #define USB_LED_CAPS_LOCK_SCANCODE 30 + #define USB_LED_SCROLL_LOCK_SCANCODE 255 + #define USB_LED_COMPOSE_SCANCODE 255 + #define USB_LED_KANA_SCANCODE 255 +#endif //USB_LED_INDICATOR_ENABLE + +#endif //_config_led_h_ diff --git a/keyboards/massdrop/alt/info.json b/keyboards/massdrop/alt/info.json new file mode 100644 index 0000000000..8f85bece21 --- /dev/null +++ b/keyboards/massdrop/alt/info.json @@ -0,0 +1,80 @@ +{ + "keyboard_name": "ALT", + "url": "https://www.massdrop.com/buy/massdrop-alt-mechanical-keyboard", + "maintainer": "Massdrop", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"ESCAPE", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"0", "x":10, "y":0}, + {"label":"MINUS", "x":11, "y":0}, + {"label":"EQUALS", "x":12, "y":0}, + {"label":"BACKSPACE", "x":13, "y":0, "w":2}, + {"label":"DELETE", "x":15, "y":0}, + {"label":"TAB", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"LEFT BRACKET", "x":11.5, "y":1}, + {"label":"RIGHT BRACKET", "x":12.5, "y":1}, + {"label":"BACK SLASH", "x":13.5, "y":1, "w":1.5}, + {"label":"HOME", "x":15, "y":1}, + {"label":"CAPS LOCK", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":"SEMICOLON", "x":10.75, "y":2}, + {"label":"SINGLE TICK", "x":11.75, "y":2}, + {"label":"ENTER", "x":12.75, "y":2, "w":2.25}, + {"label":"PAGE UP", "x":15, "y":2}, + {"label":"LEFT SHIFT", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"COMMA", "x":9.25, "y":3}, + {"label":"PERIOD", "x":10.25, "y":3}, + {"label":"FORWARD SLASH", "x":11.25, "y":3}, + {"label":"RIGHT SHIFT", "x":12.25, "y":3, "w":1.75}, + {"label":"UP ARROW", "x":14, "y":3}, + {"label":"PAGE DOWN", "x":15, "y":3}, + {"label":"LEFT CTRL", "x":0, "y":4, "w":1.25}, + {"label":"LEFT WIN", "x":1.25, "y":4, "w":1.25}, + {"label":"LEFT ALT", "x":2.5, "y":4, "w":1.25}, + {"label":"SPACEBAR", "x":3.75, "y":4, "w":6.25}, + {"label":"RIGHT ALT", "x":10, "y":4, "w":1.25}, + {"label":"FN", "x":11.25, "y":4, "w":1.25}, + {"label":"LEFT ARROW", "x":13, "y":4}, + {"label":"DOWN ARROW", "x":14, "y":4}, + {"label":"RIGHT ARROW", "x":15, "y":4} + ] + } + } +} diff --git a/keyboards/massdrop/alt/keymaps/abishalom/keymap.c b/keyboards/massdrop/alt/keymaps/abishalom/keymap.c new file mode 100644 index 0000000000..7ffa53dcaa --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/abishalom/keymap.c @@ -0,0 +1,189 @@ +#include QMK_KEYBOARD_H + +enum alt_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase + L_BRD, //LED Brightness Decrease + L_PTN, //LED Pattern Select Next + L_PTP, //LED Pattern Select Previous + L_PSI, //LED Pattern Speed Increase + L_PSD, //LED Pattern Speed Decrease + L_T_MD, //LED Toggle Mode + L_T_ONF, //LED Toggle On / Off + L_ON, //LED On + L_OFF, //LED Off + L_T_BR, //LED Toggle Breath Effect + L_T_PTD, //LED Toggle Scrolling Pattern Direction + U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ + L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ + KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + ), + /* + [X] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} diff --git a/keyboards/massdrop/alt/keymaps/default/keymap.c b/keyboards/massdrop/alt/keymaps/default/keymap.c new file mode 100644 index 0000000000..7ffa53dcaa --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/default/keymap.c @@ -0,0 +1,189 @@ +#include QMK_KEYBOARD_H + +enum alt_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase + L_BRD, //LED Brightness Decrease + L_PTN, //LED Pattern Select Next + L_PTP, //LED Pattern Select Previous + L_PSI, //LED Pattern Speed Increase + L_PSD, //LED Pattern Speed Decrease + L_T_MD, //LED Toggle Mode + L_T_ONF, //LED Toggle On / Off + L_ON, //LED On + L_OFF, //LED Off + L_T_BR, //LED Toggle Breath Effect + L_T_PTD, //LED Toggle Scrolling Pattern Direction + U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ + L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ + KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + ), + /* + [X] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} diff --git a/keyboards/massdrop/alt/keymaps/mac/keymap.c b/keyboards/massdrop/alt/keymaps/mac/keymap.c new file mode 100644 index 0000000000..9fd4816ccf --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/mac/keymap.c @@ -0,0 +1,189 @@ +#include QMK_KEYBOARD_H + +enum alt_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase + L_BRD, //LED Brightness Decrease + L_PTN, //LED Pattern Select Next + L_PTP, //LED Pattern Select Previous + L_PSI, //LED Pattern Speed Increase + L_PSD, //LED Pattern Speed Decrease + L_T_MD, //LED Toggle Mode + L_T_ONF, //LED Toggle On / Off + L_ON, //LED On + L_OFF, //LED Off + L_T_BR, //LED Toggle Breath Effect + L_T_PTD, //LED Toggle Scrolling Pattern Direction + U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ + L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ + KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + ), + /* + [X] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} diff --git a/keyboards/massdrop/alt/keymaps/reywood/keymap.c b/keyboards/massdrop/alt/keymaps/reywood/keymap.c new file mode 100644 index 0000000000..48b804efea --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/reywood/keymap.c @@ -0,0 +1,191 @@ +#include QMK_KEYBOARD_H +#include "rgb_matrix_user.h" + +enum alt_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase + L_BRD, //LED Brightness Decrease + L_PTN, //LED Pattern Select Next + L_PTP, //LED Pattern Select Previous + L_PSI, //LED Pattern Speed Increase + L_PSD, //LED Pattern Speed Decrease + L_T_MD, //LED Toggle Mode + L_T_ONF, //LED Toggle On / Off + L_ON, //LED On + L_OFF, //LED Off + L_T_BR, //LED Toggle Breath Effect + L_T_PTD, //LED Toggle Scrolling Pattern Direction + U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode +#define ______ KC_TRNS + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + _______, _______, _______, KC_UP, _______, _______, _______, U_T_AUTO,U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, KC_VOLU, _______, \ + _______, _______, _______, KC_MPLY, MO(2), _______, KC_MRWD, KC_VOLD, KC_MFFD \ + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, L_T_MD, L_T_ONF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + rgb_matrix_record_key_press(record); + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} diff --git a/keyboards/massdrop/alt/keymaps/reywood/rgb_matrix_user.c b/keyboards/massdrop/alt/keymaps/reywood/rgb_matrix_user.c new file mode 100644 index 0000000000..36131e2020 --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/reywood/rgb_matrix_user.c @@ -0,0 +1,193 @@ +#include "quantum.h" +#include "led_matrix.h" + +extern issi3733_led_t *led_cur; +extern uint8_t led_per_run; +extern issi3733_led_t *lede; +extern issi3733_led_t led_map[]; + +static uint16_t last_boost_update; +static uint8_t led_boosts[ISSI3733_LED_COUNT]; +static uint8_t led_boost_index; +static uint8_t led_cur_index; + +#define LED_BOOST_REFRESH_INTERVAL_IN_MS 40 +#define LED_BOOST_DECAY 0.7 +#define LED_BOOST_PROPAGATE 0.5 +#define LED_BOOST_PEAK 100 + +#define MIN_RGB 0x050008 +#define MIN_R (MIN_RGB >> 16 & 0xff) +#define MIN_G (MIN_RGB >> 8 & 0xff) +#define MIN_B (MIN_RGB & 0xff) + +#define MAX_RGB 0xc26eff +#define MAX_R (MAX_RGB >> 16 & 0xff) +#define MAX_G (MAX_RGB >> 8 & 0xff) +#define MAX_B (MAX_RGB & 0xff) + +#define UNDERGLOW_RGB 0x4f002e +#define UNDERGLOW_R (UNDERGLOW_RGB >> 16 & 0xff) +#define UNDERGLOW_G (UNDERGLOW_RGB >> 8 & 0xff) +#define UNDERGLOW_B (UNDERGLOW_RGB & 0xff) + +#define UNDERGLOW_SCAN_CODE 255 + +#define max(a, b) (((a) > (b)) ? (a) : (b)) + +#define __ -1 +static const uint8_t KEY_TO_LED_MAP[MATRIX_ROWS][MATRIX_COLS] = { + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, + {15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29}, + {30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, __, 42, 43}, + {44, __, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57}, + {58, 59, 60, __, __, __, 61, __, __, __, 62, 63, 64, 65, 66}, +}; + +#define KEY_LED_COUNT 67 +#define KP(c, r) { .col = c, .row = r } // shorthand for keypos_t +static const keypos_t LED_TO_KEY_MAP[KEY_LED_COUNT] = { + KP(0, 0), KP(1, 0), KP(2, 0), KP(3, 0), KP(4, 0), KP(5, 0), KP(6, 0), KP(7, 0), KP(8, 0), KP(9, 0), KP(10, 0), KP(11, 0), KP(12, 0), KP(13, 0), KP(14, 0), + KP(0, 1), KP(1, 1), KP(2, 1), KP(3, 1), KP(4, 1), KP(5, 1), KP(6, 1), KP(7, 1), KP(8, 1), KP(9, 1), KP(10, 1), KP(11, 1), KP(12, 1), KP(13, 1), KP(14, 1), + KP(0, 2), KP(1, 2), KP(2, 2), KP(3, 2), KP(4, 2), KP(5, 2), KP(6, 2), KP(7, 2), KP(8, 2), KP(9, 2), KP(10, 2), KP(11, 2), KP(13, 2), KP(14, 2), + KP(0, 3), KP(2, 3), KP(3, 3), KP(4, 3), KP(5, 3), KP(6, 3), KP(7, 3), KP(8, 3), KP(9, 3), KP(10, 3), KP(11, 3), KP(12, 3), KP(13, 3), KP(14, 3), + KP(0, 4), KP(1, 4), KP(2, 4), KP(6, 4), KP(10, 4), KP(11, 4), KP(12, 4), KP(13, 4), KP(14, 4), +}; + + +static void update_led_boosts(void); +static void update_led_cur_rgb_values(void); +static void set_nearest_led_to_max(uint8_t col, uint8_t row); +static uint8_t calculate_new_color_component_value(uint8_t max, uint8_t min); +static void calculate_new_led_boosts(uint8_t new_led_boosts[]); +static uint8_t calculate_new_led_boost_at(int index); +static uint8_t get_propagated_boost_from_neighbors(int led_position); +static uint8_t get_led_boost_at_keypos(uint8_t row, uint8_t col); +static void set_new_led_boosts(uint8_t* new_led_boosts); +static uint8_t map_key_position_to_led_index(uint8_t col, uint8_t row); + + +void rgb_matrix_init_user(void) { + for (int i = 0; i < ISSI3733_LED_COUNT; i++) { + led_boosts[i] = 0; + } + last_boost_update = timer_read(); + led_boost_index = 0; + led_cur_index = 0; +} + +void led_matrix_run(void) { + uint8_t led_this_run = 0; + + if (led_cur == 0) { //Denotes start of new processing cycle in the case of chunked processing + led_cur = led_map; + led_cur_index = 0; + } + update_led_boosts(); + + while (led_cur < lede && led_this_run < led_per_run) { + update_led_cur_rgb_values(); + + led_cur++; + led_cur_index++; + led_this_run++; + } +} + +void rgb_matrix_record_key_press(keyrecord_t *record) { + if (record->event.pressed) { + keypos_t key = record->event.key; + set_nearest_led_to_max(key.col, key.row); + } +} + + +static void update_led_boosts(void) { + if (timer_elapsed(last_boost_update) > LED_BOOST_REFRESH_INTERVAL_IN_MS) { + last_boost_update = timer_read(); + + uint8_t new_led_boosts[ISSI3733_LED_COUNT]; + calculate_new_led_boosts(new_led_boosts); + set_new_led_boosts(new_led_boosts); + } +} + +static void update_led_cur_rgb_values(void) { + if (led_cur->scan == UNDERGLOW_SCAN_CODE) { + *led_cur->rgb.r = UNDERGLOW_R; + *led_cur->rgb.g = UNDERGLOW_G; + *led_cur->rgb.b = UNDERGLOW_B; + } else { + *led_cur->rgb.r = calculate_new_color_component_value(MAX_R, MIN_R); + *led_cur->rgb.g = calculate_new_color_component_value(MAX_G, MIN_G); + *led_cur->rgb.b = calculate_new_color_component_value(MAX_B, MIN_B); + } +} + +static void set_nearest_led_to_max(uint8_t col, uint8_t row) { + uint8_t led_index = map_key_position_to_led_index(col, row); + if (led_index >= 0 && led_index < ISSI3733_LED_COUNT) { + led_boosts[led_index] = LED_BOOST_PEAK; + } +} + +static uint8_t calculate_new_color_component_value(uint8_t max, uint8_t min) { + uint8_t current_boost = led_boosts[led_cur_index]; + return (float)(max - min) * current_boost / LED_BOOST_PEAK + min; +} + +static void calculate_new_led_boosts(uint8_t new_led_boosts[]) { + for (int i = 0; i < ISSI3733_LED_COUNT; i++) { + new_led_boosts[i] = calculate_new_led_boost_at(i); + } +} + +static uint8_t calculate_new_led_boost_at(int index) { + uint8_t decayed_boost = led_boosts[index] * LED_BOOST_DECAY; + uint8_t propagated_boost = get_propagated_boost_from_neighbors(index); + uint8_t new_boost = (propagated_boost > decayed_boost) ? propagated_boost : decayed_boost; + if (new_boost > LED_BOOST_PEAK) { + new_boost = LED_BOOST_PEAK; + } + return new_boost; +} + +static uint8_t get_propagated_boost_from_neighbors(int led_position) { + if (led_position < 0 || led_position >= KEY_LED_COUNT) { + return 0; + } + keypos_t led_keypos = LED_TO_KEY_MAP[led_position]; + uint8_t top_boost = get_led_boost_at_keypos(led_keypos.row - 1, led_keypos.col); + uint8_t bottom_boost = get_led_boost_at_keypos(led_keypos.row + 1, led_keypos.col); + uint8_t left_boost = get_led_boost_at_keypos(led_keypos.row, led_keypos.col - 1); + uint8_t right_boost = get_led_boost_at_keypos(led_keypos.row, led_keypos.col + 1); + uint8_t max_boost = max(max(top_boost, bottom_boost), max(left_boost, right_boost)); + if (max_boost > LED_BOOST_PEAK) { + max_boost = LED_BOOST_PEAK; + } + return max_boost * LED_BOOST_PROPAGATE; +} + +static uint8_t get_led_boost_at_keypos(uint8_t row, uint8_t col) { + if (row < 0 || row >= MATRIX_ROWS || col < 0 || col >= MATRIX_COLS) { + return 0; + } + uint8_t led_index = KEY_TO_LED_MAP[row][col]; + if (led_index < 0) { + return 0; + } + return led_boosts[led_index]; +} + +static void set_new_led_boosts(uint8_t* new_led_boosts) { + for (int i = 0; i < ISSI3733_LED_COUNT; i++) { + led_boosts[i] = new_led_boosts[i]; + } +} + +static uint8_t map_key_position_to_led_index(uint8_t col, uint8_t row) { + if (row >= 0 && row < MATRIX_ROWS && col >= 0 && col < MATRIX_COLS) { + return KEY_TO_LED_MAP[row][col]; + } + return -1; +} diff --git a/keyboards/massdrop/alt/keymaps/reywood/rgb_matrix_user.h b/keyboards/massdrop/alt/keymaps/reywood/rgb_matrix_user.h new file mode 100644 index 0000000000..4ffd202e9b --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/reywood/rgb_matrix_user.h @@ -0,0 +1,3 @@ +#pragma once + +void rgb_matrix_record_key_press(keyrecord_t *record); diff --git a/keyboards/massdrop/alt/keymaps/reywood/rules.mk b/keyboards/massdrop/alt/keymaps/reywood/rules.mk new file mode 100644 index 0000000000..b5b961a0f3 --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/reywood/rules.mk @@ -0,0 +1,34 @@ +# project specific files +SRC = led_programs.c +SRC += matrix.c +SRC += rgb_matrix_user.c + +#For platform and packs +ARM_ATSAM = SAMD51J18A +MCU = cortex-m4 + +CUSTOM_MATRIX = yes + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +VIRTSER_ENABLE = no # USB Serial Driver +RAW_ENABLE = no # Raw device +AUTO_SHIFT_ENABLE = no # Auto Shift diff --git a/keyboards/massdrop/alt/led_programs.c b/keyboards/massdrop/alt/led_programs.c new file mode 100644 index 0000000000..b3b7a7e90e --- /dev/null +++ b/keyboards/massdrop/alt/led_programs.c @@ -0,0 +1,120 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "alt.h" +#include "led_matrix.h" + +//Teal <-> Salmon +led_setup_t leds_teal_salmon[] = { + { .hs = 0, .he = 33, .rs = 24, .re = 24, .gs = 215, .ge = 215, .bs = 204, .be = 204, .ef = EF_NONE }, + { .hs = 33, .he = 66, .rs = 24, .re = 255, .gs = 215, .ge = 114, .bs = 204, .be = 118, .ef = EF_NONE }, + { .hs = 66, .he = 100, .rs = 255, .re = 255, .gs = 114, .ge = 114, .bs = 118, .be = 118, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Yellow +led_setup_t leds_yellow[] = { + { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Off +led_setup_t leds_off[] = { + { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Red +led_setup_t leds_red[] = { + { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Green +led_setup_t leds_green[] = { + { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Blue +led_setup_t leds_blue[] = { + { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_NONE }, + { .end = 1 }, +}; + +//White +led_setup_t leds_white[] = { + { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE }, + { .end = 1 }, +}; + +//White with moving red stripe +led_setup_t leds_white_with_red_stripe[] = { + { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE }, + { .hs = 0, .he = 15, .rs = 0, .re = 0, .gs = 0, .ge = 255, .bs = 0, .be = 255, .ef = EF_SCR_R | EF_SUBTRACT }, + { .hs = 15, .he = 30, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 0, .ef = EF_SCR_R | EF_SUBTRACT }, + { .end = 1 }, +}; + +//Black with moving red stripe +led_setup_t leds_black_with_red_stripe[] = { + { .hs = 0, .he = 15, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R }, + { .hs = 15, .he = 30, .rs = 255, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R }, + { .end = 1 }, +}; + +//Rainbow no scrolling +led_setup_t leds_rainbow_ns[] = { + { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER }, + { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER }, + { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER }, + { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER }, + { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER }, + { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER }, + { .end = 1 }, +}; + +//Rainbow scrolling +led_setup_t leds_rainbow_s[] = { + { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R }, + { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R }, + { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER | EF_SCR_R }, + { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R }, + { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R }, + { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER | EF_SCR_R }, + { .end = 1 }, +}; + +//Add new LED animations here using one from above as example +//The last entry must be { .end = 1 } +//Add the new animation name to the list below following its format + +void *led_setups[] = { + leds_rainbow_s, + leds_rainbow_ns, + leds_teal_salmon, + leds_yellow, + leds_red, + leds_green, + leds_blue, + leds_white, + leds_white_with_red_stripe, + leds_black_with_red_stripe, + leds_off +}; + +const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]); diff --git a/keyboards/massdrop/alt/matrix.c b/keyboards/massdrop/alt/matrix.c new file mode 100644 index 0000000000..472479d303 --- /dev/null +++ b/keyboards/massdrop/alt/matrix.c @@ -0,0 +1,176 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "alt.h" + +#include "d51_util.h" +#include "debug.h" +#include "clks.h" +#include <string.h> + +matrix_row_t mlatest[MATRIX_ROWS]; +matrix_row_t mlast[MATRIX_ROWS]; +matrix_row_t mdebounced[MATRIX_ROWS]; + +uint8_t row_ports[] = { MATRIX_ROW_PORTS }; +uint8_t row_pins[] = { MATRIX_ROW_PINS }; +uint8_t col_ports[] = { MATRIX_COL_PORTS }; +uint8_t col_pins[] = { MATRIX_COL_PINS }; +uint32_t row_masks[2]; //NOTE: If more than PA PB used in the future, adjust code to accomodate + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +void matrix_init(void) +{ + memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(mlast, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(mdebounced, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + + row_masks[PA] = 0; + row_masks[PB] = 0; + + uint8_t row; + for (row = 0; row < MATRIX_ROWS; row++) + { + PORT->Group[row_ports[row]].DIRCLR.reg = 1 << row_pins[row]; //Input + PORT->Group[row_ports[row]].OUTCLR.reg = 1 << row_pins[row]; //Low + PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.INEN = 1; //Input Enable, + PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.PULLEN = 1; //Pull Enable + row_masks[row_ports[row]] |= 1 << row_pins[row]; //Add pin to proper row mask + } + + uint8_t col; + for (col = 0; col < MATRIX_COLS; col++) + { + PORT->Group[col_ports[col]].DIRSET.reg = 1 << col_pins[col]; //Output + PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Low + } + + matrix_init_quantum(); +} + +uint64_t mdebouncing = 0; +uint8_t matrix_scan(void) +{ + uint8_t mchanged; + uint8_t row; + uint8_t col; + uint32_t scans[2]; //PA PB + + if (timer_read64() < mdebouncing) return 1; //mdebouncing == 0 when no debouncing active + + memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); //Zero the result buffer + + for (col = 0; col < MATRIX_COLS; col++) + { + PORT->Group[col_ports[col]].OUTSET.reg = 1 << col_pins[col]; //Set col output + + wait_us(1); //Delay for output + + scans[PA] = PORT->Group[PA].IN.reg & row_masks[PA]; //Read PA row pins data + scans[PB] = PORT->Group[PB].IN.reg & row_masks[PB]; //Read PB row pins data + + PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Clear col output + + for (row = 0; row < MATRIX_ROWS; row++) + { + //Move scan bits from scans array into proper row bit locations + if (scans[row_ports[row]] & (1 << row_pins[row])) + mlatest[row] |= 1 << col; + } + } + + mchanged = 0; //Default to no matrix change since last + + for (row = 0; row < MATRIX_ROWS; row++) + { + if (mlast[row] != mlatest[row]) + mchanged = 1; + mlast[row] = mlatest[row]; + } + + if (!mchanged) + { + for (row = 0; row < MATRIX_ROWS; row++) + mdebounced[row] = mlatest[row]; + mdebouncing = 0; + } + else + { + //Begin or extend debounce on change + mdebouncing = timer_read64() + DEBOUNCING_DELAY; + } + + matrix_scan_quantum(); + + return 1; +} + +matrix_row_t matrix_get_row(uint8_t row) +{ + return mdebounced[row]; +} + +void matrix_print(void) +{ + char buf[(MATRIX_COLS+8)*(MATRIX_ROWS+1)] = "R C"; + char *pbuf = buf+3; + uint32_t cols; + uint32_t rows; + matrix_row_t row; + + for (cols = 1; cols <= MATRIX_COLS; cols++) + { + *pbuf = (cols%10)+48; + pbuf++; + } + *pbuf = '\r'; pbuf++; + *pbuf = '\n'; pbuf++; + + for (rows = 1; rows <= MATRIX_ROWS; rows++) + { + row = matrix_get_row(rows-1); + if (rows < 10) { *pbuf = rows+48; pbuf++; *pbuf = ' '; pbuf++; *pbuf = ' '; pbuf++; } + else { *pbuf = (rows/10)+48; pbuf++; *pbuf = (rows%10)+48; pbuf++; *pbuf = ' '; pbuf++; } + for (cols = 0; cols < MATRIX_COLS; cols++) + { + if (row & 1 << cols) *pbuf = 'X'; + else *pbuf = '.'; + pbuf++; + } + *pbuf = '\r'; pbuf++; + *pbuf = '\n'; pbuf++; + } + *pbuf = 0; + dprint(buf); +} diff --git a/keyboards/massdrop/alt/matrix.h b/keyboards/massdrop/alt/matrix.h new file mode 100644 index 0000000000..3eab6dece1 --- /dev/null +++ b/keyboards/massdrop/alt/matrix.h @@ -0,0 +1,77 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef MATRIX_H +#define MATRIX_H + +#include <stdint.h> +#include <stdbool.h> +#include "keyboard.h" + +#if (MATRIX_COLS <= 8) +typedef uint8_t matrix_row_t; +#elif (MATRIX_COLS <= 16) +typedef uint16_t matrix_row_t; +#elif (MATRIX_COLS <= 32) +typedef uint32_t matrix_row_t; +#else +#error "MATRIX_COLS: invalid value" +#endif + +#define MATRIX_IS_ON(row, col) (matrix_get_row(row) && (1<<col)) + +#ifdef __cplusplus +extern "C" { +#endif + +/* number of matrix rows */ +uint8_t matrix_rows(void); +/* number of matrix columns */ +uint8_t matrix_cols(void); +/* should be called at early stage of startup before matrix_init.(optional) */ +void matrix_setup(void); +/* intialize matrix for scaning. */ +void matrix_init(void); +/* scan all key states on matrix */ +uint8_t matrix_scan(void); +/* whether modified from previous scan. used after matrix_scan. */ +bool matrix_is_modified(void) __attribute__ ((deprecated)); +/* whether a switch is on */ +bool matrix_is_on(uint8_t row, uint8_t col); +/* matrix state on row */ +matrix_row_t matrix_get_row(uint8_t row); +/* print matrix for debug */ +void matrix_print(void); + +/* power control */ +void matrix_power_up(void); +void matrix_power_down(void); + +/* executes code for Quantum */ +void matrix_init_quantum(void); +void matrix_scan_quantum(void); + +void matrix_init_kb(void); +void matrix_scan_kb(void); + +void matrix_init_user(void); +void matrix_scan_user(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/keyboards/massdrop/alt/readme.md b/keyboards/massdrop/alt/readme.md new file mode 100644 index 0000000000..57e2e5f174 --- /dev/null +++ b/keyboards/massdrop/alt/readme.md @@ -0,0 +1,20 @@ +# ALT + + + +The Massdrop ALT is a 65% mechanical keyboard featuring dual USB-C connectors, an integrated Hi-Speed USB 2.0 hub, and fully customizable RGB backlighting and underlighting. + +Keyboard Maintainer: [Massdrop](https://github.com/massdrop) +Hardware Supported: Massdrop, Inc. ALT PCBs utilizing Microchip's ATSAMD51J18A MCU and USB2422 2-Port USB 2.0 Hi-Speed Hub Controller, and ISSI's IS31FL3733 LED Drivers. +Hardware Availability: [Massdrop ALT Mechanical Keyboard](https://www.massdrop.com/buy/massdrop-alt-mechanical-keyboard) + +Make example for this keyboard (after setting up your build environment): + + make massdrop/alt:default + +For information on flashing this keyboard, visit the following links: + +[Massdrop Loader Releases](https://github.com/Massdrop/mdloader/releases/tag/0.0.1) +[Massdrop Loader Repository and Instructions](https://github.com/Massdrop/mdloader) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk new file mode 100644 index 0000000000..c5539158f5 --- /dev/null +++ b/keyboards/massdrop/alt/rules.mk @@ -0,0 +1,33 @@ +# project specific files +SRC = led_programs.c +SRC += matrix.c + +#For platform and packs +ARM_ATSAM = SAMD51J18A +MCU = cortex-m4 + +CUSTOM_MATRIX = yes + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +VIRTSER_ENABLE = no # USB Serial Driver +RAW_ENABLE = no # Raw device +AUTO_SHIFT_ENABLE = no # Auto Shift diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h new file mode 100644 index 0000000000..31eccda87d --- /dev/null +++ b/keyboards/massdrop/ctrl/config.h @@ -0,0 +1,126 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xEED2 +#define DEVICE_VER 0x0101 + +#define MANUFACTURER "Massdrop Inc." +#define PRODUCT "CTRL Keyboard" +#define SERIAL_NUM "Unavailable" + +/* key matrix size */ +#define MATRIX_ROWS 11 +#define MATRIX_COLS 8 + +/* MCU Port name definitions */ +#define PA 0 +#define PB 1 + +/* Port and Pin definition of key row hardware configuration */ +#define MATRIX_ROW_PORTS PB, PB, PB, PB, PB, PB, PA, PA, PB, PB, PB +#define MATRIX_ROW_PINS 4, 5, 6, 7, 8, 9, 10, 11, 10, 11, 12 + +/* Port and Pin definition of key column hardware configuration */ +#define MATRIX_COL_PORTS PA, PA, PA, PA, PA, PA, PA, PA +#define MATRIX_COL_PINS 0, 1, 2, 3, 4, 5, 6, 7 + +/* This Shift Register expands available hardware output lines to control additional peripherals */ +/* It uses four lines from the MCU to provide 16 output lines */ +/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */ +#define SR_EXP_RCLK_PORT PB +#define SR_EXP_RCLK_PIN 14 +/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */ +#define SR_EXP_OE_N_PORT PB +#define SR_EXP_OE_N_PIN 15 +/* SERCOM port to use for Shift Register SPI */ +/* DATAOUT and SCLK must be configured to use hardware pins of this port */ +#define SR_EXP_SERCOM SERCOM2 +/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */ +#define SR_EXP_DATAOUT_PORT PA +#define SR_EXP_DATAOUT_PIN 12 +#define SR_EXP_DATAOUT_MUX 2 +/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */ +#define SR_EXP_SCLK_PORT PA +#define SR_EXP_SCLK_PIN 13 +#define SR_EXP_SCLK_MUX 2 + +/* Debug LED (Small LED Located near MCU) */ +#define DEBUG_LED_ENABLE 1 +#define DEBUG_LED_PORT PA +#define DEBUG_LED_PIN 27 + +/* Additional debugging ports */ +/* PCB M21 */ +#define DEBUG_PORT1_ENABLE 1 +#define DEBUG_PORT1_PORT PB +#define DEBUG_PORT1_PIN 3 +/* PCB M23 */ +#define DEBUG_PORT2_ENABLE 1 +#define DEBUG_PORT2_PORT PB +#define DEBUG_PORT2_PIN 17 +/* PCB M25 */ +#define DEBUG_PORT3_ENABLE 1 +#define DEBUG_PORT3_PORT PA +#define DEBUG_PORT3_PIN 20 + +/* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */ +/* This is useful in determining which hardware device may have malfunctioned or is improperly configured */ +/* Feature is automatically disabled after successful boot */ +/* PCB M27 */ +#define DEBUG_BOOT_TRACING_ENABLE 1 +#define DEBUG_BOOT_TRACING_PORT PB +#define DEBUG_BOOT_TRACING_PIN 23 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Force boot in NKRO mode */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/massdrop/ctrl/config_led.h b/keyboards/massdrop/ctrl/config_led.h new file mode 100644 index 0000000000..471ab7007d --- /dev/null +++ b/keyboards/massdrop/ctrl/config_led.h @@ -0,0 +1,191 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef _config_led_h_ +#define _config_led_h_ + +//Define number of ISSI3733 drivers being used (1...16) +#define ISSI3733_DRIVER_COUNT 2 + +//Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic) +#define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE } + +//LED I2C bus speed +#define I2C_HZ 580000 + +//Count of LED bodies +#define ISSI3733_LED_COUNT 119 + +//Default Global Current Register value (Default brightness 0 - 255) +#define ISSI3733_GCR_DEFAULT 128 + +#define LED_GCR_MAX 165 //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus +#define LED_GCR_STEP 10 //GCR increment/decrement value + +//Automatic power rollback and recovery +#define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power ) +#define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit) +#define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down) + +#define ANIMATION_SPEED_STEP 1 + +#define BREATHE_MIN_STEP 0 +#define BREATHE_MAX_STEP 255 + +//LED Mapping - More practically generated from a spreadsheet program +//id: ID of the LED (Sync with PCB callouts) +//x: Physical X coordinate of LED (units do not matter) +//y: Physical Y coordinate of LED (units do not matter) +//drv: 1-Based index of ISSI3773_DRIVER_ADDRESSES +//cs: Matrix wiring CS col (1-16) +//swr: Matrix wiring SW Red row (1-12) +//swg: Matrix wiring SW Green row (1-12) +//swb: Matrix wiring SW Blue row (1-12) +//scan: Associated key scancode if any +//Note: Origin 0,0 may be located anywhere as the software will do the final layout +#define ISSI3733_LED_MAP { \ + { .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \ + { .id = 2, .x = 1.5, .y = 0, .adr = { .drv = 2, .cs = 3, .swr = 5, .swg = 4, .swb = 6 }, .scan = 1 }, \ + { .id = 3, .x = 2.25, .y = 0, .adr = { .drv = 2, .cs = 4, .swr = 5, .swg = 4, .swb = 6 }, .scan = 2 }, \ + { .id = 4, .x = 3, .y = 0, .adr = { .drv = 2, .cs = 5, .swr = 5, .swg = 4, .swb = 6 }, .scan = 3 }, \ + { .id = 5, .x = 3.75, .y = 0, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 4 }, \ + { .id = 6, .x = 4.875, .y = 0, .adr = { .drv = 2, .cs = 7, .swr = 5, .swg = 4, .swb = 6 }, .scan = 5 }, \ + { .id = 7, .x = 5.625, .y = 0, .adr = { .drv = 2, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 6 }, \ + { .id = 8, .x = 6.375, .y = 0, .adr = { .drv = 1, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 7 }, \ + { .id = 9, .x = 7.125, .y = 0, .adr = { .drv = 1, .cs = 2, .swr = 5, .swg = 4, .swb = 6 }, .scan = 48 }, \ + { .id = 10, .x = 8.25, .y = 0, .adr = { .drv = 1, .cs = 3, .swr = 5, .swg = 4, .swb = 6 }, .scan = 49 }, \ + { .id = 11, .x = 9, .y = 0, .adr = { .drv = 1, .cs = 4, .swr = 5, .swg = 4, .swb = 6 }, .scan = 50 }, \ + { .id = 12, .x = 9.75, .y = 0, .adr = { .drv = 1, .cs = 5, .swr = 5, .swg = 4, .swb = 6 }, .scan = 51 }, \ + { .id = 13, .x = 10.5, .y = 0, .adr = { .drv = 1, .cs = 6, .swr = 5, .swg = 4, .swb = 6 }, .scan = 52 }, \ + { .id = 14, .x = 11.625, .y = 0, .adr = { .drv = 1, .cs = 7, .swr = 5, .swg = 4, .swb = 6 }, .scan = 53 }, \ + { .id = 15, .x = 12.375, .y = 0, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 54 }, \ + { .id = 16, .x = 13.125, .y = 0, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 55 }, \ + { .id = 17, .x = 0, .y = -1.125, .adr = { .drv = 2, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 8 }, \ + { .id = 18, .x = 0.75, .y = -1.125, .adr = { .drv = 2, .cs = 2, .swr = 8, .swg = 7, .swb = 9 }, .scan = 9 }, \ + { .id = 19, .x = 1.5, .y = -1.125, .adr = { .drv = 2, .cs = 3, .swr = 8, .swg = 7, .swb = 9 }, .scan = 10 }, \ + { .id = 20, .x = 2.25, .y = -1.125, .adr = { .drv = 2, .cs = 4, .swr = 8, .swg = 7, .swb = 9 }, .scan = 11 }, \ + { .id = 21, .x = 3, .y = -1.125, .adr = { .drv = 2, .cs = 5, .swr = 8, .swg = 7, .swb = 9 }, .scan = 12 }, \ + { .id = 22, .x = 3.75, .y = -1.125, .adr = { .drv = 2, .cs = 6, .swr = 8, .swg = 7, .swb = 9 }, .scan = 13 }, \ + { .id = 23, .x = 4.5, .y = -1.125, .adr = { .drv = 2, .cs = 7, .swr = 8, .swg = 7, .swb = 9 }, .scan = 14 }, \ + { .id = 24, .x = 5.25, .y = -1.125, .adr = { .drv = 2, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 15 }, \ + { .id = 25, .x = 6, .y = -1.125, .adr = { .drv = 1, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 56 }, \ + { .id = 26, .x = 6.75, .y = -1.125, .adr = { .drv = 1, .cs = 2, .swr = 8, .swg = 7, .swb = 9 }, .scan = 57 }, \ + { .id = 27, .x = 7.5, .y = -1.125, .adr = { .drv = 1, .cs = 3, .swr = 8, .swg = 7, .swb = 9 }, .scan = 58 }, \ + { .id = 28, .x = 8.25, .y = -1.125, .adr = { .drv = 1, .cs = 4, .swr = 8, .swg = 7, .swb = 9 }, .scan = 59 }, \ + { .id = 29, .x = 9, .y = -1.125, .adr = { .drv = 1, .cs = 5, .swr = 8, .swg = 7, .swb = 9 }, .scan = 60 }, \ + { .id = 30, .x = 10.125, .y = -1.125, .adr = { .drv = 1, .cs = 6, .swr = 8, .swg = 7, .swb = 9 }, .scan = 61 }, \ + { .id = 31, .x = 11.625, .y = -1.125, .adr = { .drv = 1, .cs = 7, .swr = 8, .swg = 7, .swb = 9 }, .scan = 62 }, \ + { .id = 32, .x = 12.375, .y = -1.125, .adr = { .drv = 1, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 63 }, \ + { .id = 33, .x = 13.125, .y = -1.125, .adr = { .drv = 1, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 79 }, \ + { .id = 34, .x = 0.188, .y = -1.875, .adr = { .drv = 2, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 16 }, \ + { .id = 35, .x = 1.125, .y = -1.875, .adr = { .drv = 2, .cs = 2, .swr = 11, .swg = 10, .swb = 12 }, .scan = 17 }, \ + { .id = 36, .x = 1.875, .y = -1.875, .adr = { .drv = 2, .cs = 3, .swr = 11, .swg = 10, .swb = 12 }, .scan = 18 }, \ + { .id = 37, .x = 2.625, .y = -1.875, .adr = { .drv = 2, .cs = 4, .swr = 11, .swg = 10, .swb = 12 }, .scan = 19 }, \ + { .id = 38, .x = 3.375, .y = -1.875, .adr = { .drv = 2, .cs = 5, .swr = 11, .swg = 10, .swb = 12 }, .scan = 20 }, \ + { .id = 39, .x = 4.125, .y = -1.875, .adr = { .drv = 2, .cs = 6, .swr = 11, .swg = 10, .swb = 12 }, .scan = 21 }, \ + { .id = 40, .x = 4.875, .y = -1.875, .adr = { .drv = 2, .cs = 7, .swr = 11, .swg = 10, .swb = 12 }, .scan = 22 }, \ + { .id = 41, .x = 5.625, .y = -1.875, .adr = { .drv = 2, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 23 }, \ + { .id = 42, .x = 6.375, .y = -1.875, .adr = { .drv = 1, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 64 }, \ + { .id = 43, .x = 7.125, .y = -1.875, .adr = { .drv = 1, .cs = 2, .swr = 11, .swg = 10, .swb = 12 }, .scan = 65 }, \ + { .id = 44, .x = 7.875, .y = -1.875, .adr = { .drv = 1, .cs = 3, .swr = 11, .swg = 10, .swb = 12 }, .scan = 66 }, \ + { .id = 45, .x = 8.625, .y = -1.875, .adr = { .drv = 1, .cs = 4, .swr = 11, .swg = 10, .swb = 12 }, .scan = 67 }, \ + { .id = 46, .x = 9.375, .y = -1.875, .adr = { .drv = 1, .cs = 5, .swr = 11, .swg = 10, .swb = 12 }, .scan = 68 }, \ + { .id = 47, .x = 10.312, .y = -1.875, .adr = { .drv = 1, .cs = 6, .swr = 11, .swg = 10, .swb = 12 }, .scan = 69 }, \ + { .id = 48, .x = 11.625, .y = -1.875, .adr = { .drv = 1, .cs = 7, .swr = 11, .swg = 10, .swb = 12 }, .scan = 70 }, \ + { .id = 49, .x = 12.375, .y = -1.875, .adr = { .drv = 1, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 71 }, \ + { .id = 50, .x = 13.125, .y = -1.875, .adr = { .drv = 1, .cs = 9, .swr = 11, .swg = 10, .swb = 12 }, .scan = 78 }, \ + { .id = 51, .x = 0.281, .y = -2.625, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 24 }, \ + { .id = 52, .x = 1.313, .y = -2.625, .adr = { .drv = 2, .cs = 2, .swr = 5, .swg = 4, .swb = 6 }, .scan = 25 }, \ + { .id = 53, .x = 2.063, .y = -2.625, .adr = { .drv = 2, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 26 }, \ + { .id = 54, .x = 2.812, .y = -2.625, .adr = { .drv = 2, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 27 }, \ + { .id = 55, .x = 3.562, .y = -2.625, .adr = { .drv = 2, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 28 }, \ + { .id = 56, .x = 4.312, .y = -2.625, .adr = { .drv = 2, .cs = 6, .swr = 5, .swg = 4, .swb = 6 }, .scan = 29 }, \ + { .id = 57, .x = 5.062, .y = -2.625, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 30 }, \ + { .id = 58, .x = 5.812, .y = -2.625, .adr = { .drv = 2, .cs = 9, .swr = 11, .swg = 10, .swb = 12 }, .scan = 31 }, \ + { .id = 59, .x = 6.562, .y = -2.625, .adr = { .drv = 1, .cs = 16, .swr = 11, .swg = 10, .swb = 12 }, .scan = 72 }, \ + { .id = 60, .x = 7.312, .y = -2.625, .adr = { .drv = 1, .cs = 15, .swr = 11, .swg = 10, .swb = 12 }, .scan = 73 }, \ + { .id = 61, .x = 8.062, .y = -2.625, .adr = { .drv = 1, .cs = 14, .swr = 11, .swg = 10, .swb = 12 }, .scan = 74 }, \ + { .id = 62, .x = 8.812, .y = -2.625, .adr = { .drv = 1, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 75 }, \ + { .id = 63, .x = 10.031, .y = -2.625, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 76 }, \ + { .id = 64, .x = 0.469, .y = -3.375, .adr = { .drv = 2, .cs = 14, .swr = 5, .swg = 4, .swb = 6 }, .scan = 32 }, \ + { .id = 65, .x = 1.688, .y = -3.375, .adr = { .drv = 2, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 33 }, \ + { .id = 66, .x = 2.438, .y = -3.375, .adr = { .drv = 2, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 34 }, \ + { .id = 67, .x = 3.188, .y = -3.375, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 35 }, \ + { .id = 68, .x = 3.938, .y = -3.375, .adr = { .drv = 2, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 36 }, \ + { .id = 69, .x = 4.688, .y = -3.375, .adr = { .drv = 2, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 37 }, \ + { .id = 70, .x = 5.438, .y = -3.375, .adr = { .drv = 2, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 38 }, \ + { .id = 71, .x = 6.188, .y = -3.375, .adr = { .drv = 2, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 39 }, \ + { .id = 72, .x = 6.938, .y = -3.375, .adr = { .drv = 1, .cs = 16, .swr = 8, .swg = 7, .swb = 9 }, .scan = 80 }, \ + { .id = 73, .x = 7.688, .y = -3.375, .adr = { .drv = 1, .cs = 15, .swr = 8, .swg = 7, .swb = 9 }, .scan = 81 }, \ + { .id = 74, .x = 8.438, .y = -3.375, .adr = { .drv = 1, .cs = 14, .swr = 8, .swg = 7, .swb = 9 }, .scan = 82 }, \ + { .id = 75, .x = 9.844, .y = -3.375, .adr = { .drv = 1, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 83 }, \ + { .id = 76, .x = 12.375, .y = -3.375, .adr = { .drv = 1, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 77 }, \ + { .id = 77, .x = 0.094, .y = -4.125, .adr = { .drv = 2, .cs = 14, .swr = 11, .swg = 10, .swb = 12 }, .scan = 40 }, \ + { .id = 78, .x = 1.031, .y = -4.125, .adr = { .drv = 2, .cs = 14, .swr = 8, .swg = 7, .swb = 9 }, .scan = 41 }, \ + { .id = 79, .x = 1.969, .y = -4.125, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 42 }, \ + { .id = 80, .x = 4.781, .y = -4.125, .adr = { .drv = 2, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 43 }, \ + { .id = 81, .x = 7.594, .y = -4.125, .adr = { .drv = 1, .cs = 16, .swr = 5, .swg = 4, .swb = 6 }, .scan = 44 }, \ + { .id = 82, .x = 8.531, .y = -4.125, .adr = { .drv = 1, .cs = 15, .swr = 5, .swg = 4, .swb = 6 }, .scan = 45 }, \ + { .id = 83, .x = 9.469, .y = -4.125, .adr = { .drv = 1, .cs = 14, .swr = 5, .swg = 4, .swb = 6 }, .scan = 46 }, \ + { .id = 84, .x = 10.406, .y = -4.125, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 47 }, \ + { .id = 85, .x = 11.625, .y = -4.125, .adr = { .drv = 1, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 84 }, \ + { .id = 86, .x = 12.375, .y = -4.125, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 85 }, \ + { .id = 87, .x = 13.125, .y = -4.125, .adr = { .drv = 1, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 86 }, \ + { .id = 88, .x = 13.433, .y = -4.43, .adr = { .drv = 1, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 89, .x = 12.285, .y = -4.535, .adr = { .drv = 1, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 90, .x = 11.14, .y = -4.535, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 91, .x = 9.995, .y = -4.535, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 92, .x = 8.85, .y = -4.535, .adr = { .drv = 1, .cs = 15, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 93, .x = 7.705, .y = -4.535, .adr = { .drv = 1, .cs = 16, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 94, .x = 6.56, .y = -4.535, .adr = { .drv = 2, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 95, .x = 5.415, .y = -4.535, .adr = { .drv = 2, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 96, .x = 4.27, .y = -4.535, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 97, .x = 3.125, .y = -4.535, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 98, .x = 1.98, .y = -4.535, .adr = { .drv = 2, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 99, .x = 0.835, .y = -4.535, .adr = { .drv = 2, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 100, .x = -0.307, .y = -4.43, .adr = { .drv = 2, .cs = 15, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 101, .x = -0.41, .y = -3.245, .adr = { .drv = 2, .cs = 15, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 102, .x = -0.41, .y = -2.06, .adr = { .drv = 2, .cs = 15, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 103, .x = -0.41, .y = -0.875, .adr = { .drv = 2, .cs = 15, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 104, .x = -0.308, .y = 0.31, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 105, .x = 0.835, .y = 0.415, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 106, .x = 1.98, .y = 0.415, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 107, .x = 3.125, .y = 0.415, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 108, .x = 4.27, .y = 0.415, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 109, .x = 5.415, .y = 0.415, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 110, .x = 6.56, .y = 0.415, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 111, .x = 7.705, .y = 0.415, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 112, .x = 8.85, .y = 0.415, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 113, .x = 9.995, .y = 0.415, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 114, .x = 11.14, .y = 0.415, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 115, .x = 12.285, .y = 0.415, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 116, .x = 13.432, .y = 0.31, .adr = { .drv = 1, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 117, .x = 13.535, .y = -0.875, .adr = { .drv = 1, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 118, .x = 13.535, .y = -2.06, .adr = { .drv = 1, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 119, .x = 13.535, .y = -3.245, .adr = { .drv = 1, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ +}; + +#define USB_LED_INDICATOR_ENABLE //Comment out to disable indicator functionality +#ifdef USB_LED_INDICATOR_ENABLE //Scan codes refer to actual key matrix codes, not KC_* (255 to disable) + #define USB_LED_NUM_LOCK_SCANCODE 255 + #define USB_LED_CAPS_LOCK_SCANCODE 24 + #define USB_LED_SCROLL_LOCK_SCANCODE 54 + #define USB_LED_COMPOSE_SCANCODE 255 + #define USB_LED_KANA_SCANCODE 255 +#endif //USB_LED_INDICATOR_ENABLE + +#endif //_config_led_h_ diff --git a/keyboards/massdrop/ctrl/ctrl.h b/keyboards/massdrop/ctrl/ctrl.h new file mode 100644 index 0000000000..c83efca16d --- /dev/null +++ b/keyboards/massdrop/ctrl/ctrl.h @@ -0,0 +1,42 @@ +#pragma once + +#include "quantum.h" +#include "config_led.h" +#include "matrix.h" + +#include "i2c_master.h" +#include "led_matrix.h" //For led keycodes +#include "usb/udi_cdc.h" +#include "usb/usb2422.h" + +#define LAYOUT( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \ + K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, \ + K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K60, \ + K61, K62, K63, K64, K65, K66, K67, K68, K69, K70, K71, K72, K73, K74, K75, \ + K76, K77, K78, K79, K80, K81, K82, K83, K84, K85, K86, K87 \ + \ +) { \ + { K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { K17, K18, K19, K20, K21, K22, K23, K24 }, \ + { K34, K35, K36, K37, K38, K39, K40, K41 }, \ + { K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K64, K65, K66, K67, K68, K69, K70, K71 }, \ + { K77, K78, K79, K80, K81, K82, K83, K84 }, \ + { K09, K10, K11, K12, K13, K14, K15, K16 }, \ + { K25, K26, K27, K28, K29, K30, K31, K32 }, \ + { K42, K43, K44, K45, K46, K47, K48, K49 }, \ + { K59, K60, K61, K62, K63, K76, K50, K33 }, \ + { K72, K73, K74, K75, K85, K86, K87, }, \ +} + +#define TOGGLE_FLAG_AND_PRINT(var, name) { \ + if (var) { \ + dprintf(name " disabled\r\n"); \ + var = !var; \ + } else { \ + var = !var; \ + dprintf(name " enabled\r\n"); \ + } \ + } diff --git a/keyboards/massdrop/ctrl/info.json b/keyboards/massdrop/ctrl/info.json new file mode 100644 index 0000000000..2212540e52 --- /dev/null +++ b/keyboards/massdrop/ctrl/info.json @@ -0,0 +1,100 @@ +{ + "keyboard_name": "CTRL", + "url": "https://www.massdrop.com/buy/massdrop-ctrl-mechanical-keyboard", + "maintainer": "Massdrop", + "width": 18.5, + "height": 6.5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"ESCAPE", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PRINT SCREEN", "x":15.5, "y":0}, + {"label":"SCROLL LOCK", "x":16.5, "y":0}, + {"label":"PAUSE BREAK", "x":17.5, "y":0}, + {"label":"BACKTICK", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"MINUS", "x":11, "y":1.5}, + {"label":"EQUALS", "x":12, "y":1.5}, + {"label":"BACKSPACE", "x":13, "y":1.5, "w":2}, + {"label":"INSERT", "x":15.5, "y":1.5}, + {"label":"HOME", "x":16.5, "y":1.5}, + {"label":"PAGE UP", "x":17.5, "y":1.5}, + {"label":"TAB", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"LEFT BRACKET", "x":11.5, "y":2.5}, + {"label":"RIGHT BRACKET", "x":12.5, "y":2.5}, + {"label":"BACK SLASH", "x":13.5, "y":2.5, "w":1.5}, + {"label":"DELETE", "x":15.5, "y":2.5}, + {"label":"END", "x":16.5, "y":2.5}, + {"label":"PAGE DOWN", "x":17.5, "y":2.5}, + {"label":"CAPS LOCK", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":"SEMICOLON", "x":10.75, "y":3.5}, + {"label":"SINGLE TICK", "x":11.75, "y":3.5}, + {"label":"ENTER", "x":12.75, "y":3.5, "w":2.25}, + {"label":"LEFT SHIFT", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"COMMA", "x":9.25, "y":4.5}, + {"label":"PERIOD", "x":10.25, "y":4.5}, + {"label":"FORWARD SLASH", "x":11.25, "y":4.5}, + {"label":"RIGHT SHIFT", "x":12.25, "y":4.5, "w":2.75}, + {"label":"UP ARROW", "x":16.5, "y":4.5}, + {"label":"LEFT CTRL", "x":0.005, "y":5.5, "w":1.24}, + {"label":"LEFT WIN", "x":1.255, "y":5.5, "w":1.24}, + {"label":"LEFT ALT", "x":2.505, "y":5.5, "w":1.24}, + {"label":"SPACEBAR", "x":3.75, "y":5.5, "w":6.25}, + {"label":"RIGHT ALT", "x":10, "y":5.5, "w":1.25}, + {"label":"FN", "x":11.25, "y":5.5, "w":1.25}, + {"label":"MENU", "x":12.5, "y":5.5, "w":1.25}, + {"label":"RIGHT CTRL", "x":13.75, "y":5.5, "w":1.25}, + {"label":"LEFT ARROW", "x":15.5, "y":5.5}, + {"label":"DOWN ARROW", "x":16.5, "y":5.5}, + {"label":"RIGHT ARROW", "x":17.5, "y":5.5} + ] + } + } +} diff --git a/keyboards/massdrop/ctrl/keymaps/default/keymap.c b/keyboards/massdrop/ctrl/keymaps/default/keymap.c new file mode 100644 index 0000000000..11597f9879 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/default/keymap.c @@ -0,0 +1,192 @@ +#include QMK_KEYBOARD_H + +enum ctrl_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase + L_BRD, //LED Brightness Decrease + L_PTN, //LED Pattern Select Next + L_PTP, //LED Pattern Select Previous + L_PSI, //LED Pattern Speed Increase + L_PSD, //LED Pattern Speed Decrease + L_T_MD, //LED Toggle Mode + L_T_ONF, //LED Toggle On / Off + L_ON, //LED On + L_OFF, //LED Off + L_T_BR, //LED Toggle Breath Effect + L_T_PTD, //LED Toggle Scrolling Pattern Direction + U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MSTP, KC_VOLU, \ + L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + /* + [X] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} diff --git a/keyboards/massdrop/ctrl/keymaps/mac/keymap.c b/keyboards/massdrop/ctrl/keymaps/mac/keymap.c new file mode 100644 index 0000000000..badb566b37 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/mac/keymap.c @@ -0,0 +1,192 @@ +#include QMK_KEYBOARD_H + +enum ctrl_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase + L_BRD, //LED Brightness Decrease + L_PTN, //LED Pattern Select Next + L_PTP, //LED Pattern Select Previous + L_PSI, //LED Pattern Speed Increase + L_PSD, //LED Pattern Speed Decrease + L_T_MD, //LED Toggle Mode + L_T_ONF, //LED Toggle On / Off + L_ON, //LED On + L_OFF, //LED Off + L_T_BR, //LED Toggle Breath Effect + L_T_PTD, //LED Toggle Scrolling Pattern Direction + U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MSTP, KC_VOLU, \ + L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + /* + [X] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} diff --git a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c new file mode 100644 index 0000000000..eabd8d23a9 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c @@ -0,0 +1,939 @@ +#include QMK_KEYBOARD_H + +// uint8_t keyboard_leds(void) +#include <tmk_core/protocol/arm_atsam/main_arm_atsam.h> + + +#if ISSI3733_LED_COUNT == 119 +# define KEY_LED_COUNT 87 +#elif ISSI3733_LED_COUNT == 105 +# define KEY_LED_COUNT 67 +#endif + +#define min(x, y) (x < y ? x : y) + + +extern issi3733_led_t *lede; +extern issi3733_led_t led_map[]; +extern led_disp_t disp; + +enum ctrl_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase + L_BRD, //LED Brightness Decrease + L_PTN, //LED Pattern Select Next + L_PTP, //LED Pattern Select Previous + L_PSI, //LED Pattern Speed Increase + L_PSD, //LED Pattern Speed Decrease + L_T_MD, //LED Toggle Mode + L_T_ONF, //LED Toggle On / Off + L_ON, //LED On + L_OFF, //LED Off + L_T_BR, //LED Toggle Breath Effect + L_T_PTD, //LED Toggle Scrolling Pattern Direction + U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout + + L_SP_PR, //LED Splash Pattern Select Previous + L_SP_NE, //LED Splash Pattern Select Next + + L_SP_WD, //LED Splash Widen Wavefront width + L_SP_NW, //LED Splash Narrow Wavefront width + + L_SP_FA, //LED Splash wave travel speed faster (shorter period) + L_SP_SL, //LED Splash wave travel speed slower (longer period) + + L_CP_PR, //LED Color Pattern Select Previous + L_CP_NX, //LEB Color Pattern Select Next +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode +#define ______ KC_TRNS + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, U_T_AUTO,U_T_AGCR,_______, MO(2), _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + L_CP_NX, L_SP_SL, L_SP_WD, L_SP_FA, _______, _______, L_CP_NX, L_SP_SL, L_SP_WD, L_SP_FA, _______, _______, _______, _______, _______, _______, _______, \ + L_CP_PR, L_SP_PR, L_SP_NW, L_SP_NE, _______, _______, L_CP_PR, L_SP_PR, L_SP_NW, L_SP_NE, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// see: /tmk_core/common/keycode.h +uint8_t KEYCODE_TO_LED_ID[256]; +uint8_t DISTANCE_MAP[KEY_LED_COUNT+1][KEY_LED_COUNT+1]; +struct user_led_t { + uint8_t state; + uint8_t r; + uint8_t g; + uint8_t b; +} USER_LED[KEY_LED_COUNT] = { + +}; + +struct { + uint8_t PATTERN_INDEX; + uint8_t WAVE_FRONT_WIDTH; + uint16_t WAVE_PERIOD; + uint8_t COLOR_PATTERN_INDEX; + uint8_t TRAVEL_DISTANCE; +} USER_CONFIG = { + .PATTERN_INDEX = 1, + .WAVE_FRONT_WIDTH = 3, + .WAVE_PERIOD = 50, + .COLOR_PATTERN_INDEX = 0, + .TRAVEL_DISTANCE = 25, +}; + +uint8_t ktli(uint16_t keycode){ + if(keycode < 256){ + // the array is initialized in `matrix_init_user()` + return KEYCODE_TO_LED_ID[keycode]; + } + switch(keycode){ + // definition of MO(layer): quantum/quantum_keycodes.h: line 614 + case MO(1): return 82; + } + return 0; +}; + +// Runs just one time when the keyboard initializes. +static void init_keycode_to_led_map(void){ + uint16_t LED_MAP[MATRIX_ROWS][MATRIX_COLS] = LAYOUT( + 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19, + 20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35, + 36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51, + 52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67, +#if KEY_LED_COUNT >= 87 + 68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87 +#endif + ); + + uint16_t key = 0; + for(uint8_t y = 0; y < MATRIX_ROWS; ++y){ + for(uint8_t x = 0; x < MATRIX_COLS; ++x){ + key = keymaps[0][y][x]; + if(key < 256){ + KEYCODE_TO_LED_ID[key] = LED_MAP[y][x]; + } + } + } +} +// https://docs.qmk.fm/#/feature_terminal +#define KEY_POSITION_MAP_ROWS 6 +#define KEY_POSITION_MAP_COLUMNS 20 +static void init_distance_map(void){ + uint16_t KEY_POSITION_MAP[KEY_POSITION_MAP_ROWS][KEY_POSITION_MAP_COLUMNS] = { + { KC_NO, KC_ESC, KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_NO, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, }, + // { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, + { KC_NO, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_NO, KC_INS, KC_HOME, KC_PGUP, }, + { KC_NO, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_BSLS, KC_NO, KC_DEL, KC_END, KC_PGDN, }, + { KC_NO, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_ENT, KC_NO, KC_NO, KC_NO, KC_NO, }, + { KC_NO, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_RSFT, KC_RSFT, KC_NO, KC_NO, KC_UP, KC_NO, }, + { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_NO, MO(1), KC_APP, KC_RCTL, KC_RCTL, KC_RCTL, KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT, }, + }; + uint8_t columns = KEY_POSITION_MAP_COLUMNS; + uint8_t rows = KEY_POSITION_MAP_ROWS; + + for(uint8_t y = 0; y < rows; ++y){ + for(uint8_t x = 0; x < columns; ++x){ + uint8_t id1 = ktli(KEY_POSITION_MAP[y][x]); + + for(uint8_t j = y; j < rows; ++j){ + for(uint8_t i = 0; i < columns; ++i){ + uint8_t id2 = ktli(KEY_POSITION_MAP[j][i]); + + if(id1 == id2) continue; + + uint8_t dx = abs(i - x); + uint8_t dy = abs(j - y); + uint8_t dis = dx + dy; + if(i < x && j > y){ + dis -= min(dx, dy); + } + + uint8_t _dis = DISTANCE_MAP[id1][id2]; + if(_dis && _dis <= dis) continue; + DISTANCE_MAP[id1][id2] = dis; + DISTANCE_MAP[id2][id1] = dis; + } + } + } + } +} +void matrix_init_user(void) { + init_keycode_to_led_map(); + init_distance_map(); +}; + +// /tmk_core/protocol/arm_atsam/led_matrix.c: line 244 +uint8_t led_enabled; +float led_animation_speed; +uint8_t led_animation_direction; +uint8_t led_animation_orientation; +uint8_t led_animation_breathing; +uint8_t led_animation_breathe_cur; +uint8_t breathe_step; +uint8_t breathe_dir; +uint64_t led_next_run; + +uint8_t led_animation_id; +uint8_t led_lighting_mode; + +issi3733_led_t *led_cur; +uint8_t led_per_run; +float breathe_mult; + +// overrided /tmk_core/protocol/arm_atsam/led_matrix.c: line 484 +void rgb_matrix_init_user(void){ + led_animation_speed = ANIMATION_SPEED_STEP * 15; + led_per_run = 15; +} + +// overrided /tmk_core/protocol/arm_atsam/led_matrix.c: line 262 +void led_matrix_run(void) +{ + float ro; + float go; + float bo; + float po; + uint8_t led_this_run = 0; + led_setup_t *f = (led_setup_t*)led_setups[led_animation_id]; + + if (led_cur == 0) //Denotes start of new processing cycle in the case of chunked processing + { + led_cur = led_map; + + disp.frame += 1; + + breathe_mult = 1; + + if (led_animation_breathing) + { + led_animation_breathe_cur += breathe_step * breathe_dir; + + if (led_animation_breathe_cur >= BREATHE_MAX_STEP) + breathe_dir = -1; + else if (led_animation_breathe_cur <= BREATHE_MIN_STEP) + breathe_dir = 1; + + //Brightness curve created for 256 steps, 0 - ~98% + breathe_mult = 0.000015 * led_animation_breathe_cur * led_animation_breathe_cur; + if (breathe_mult > 1) breathe_mult = 1; + else if (breathe_mult < 0) breathe_mult = 0; + } + } + + uint8_t fcur = 0; + uint8_t fmax = 0; + + //Frames setup + while (f[fcur].end != 1) + { + fcur++; //Count frames + } + + fmax = fcur; //Store total frames count + + struct user_led_t user_led_cur; + while (led_cur < lede && led_this_run < led_per_run) + { + ro = 0; + go = 0; + bo = 0; + + uint8_t led_index = led_cur - led_map; // only this part differs from the original function. + if(led_index < KEY_LED_COUNT){ // + user_led_cur = USER_LED[led_index]; // `struct user_led_t USER_LED[]` is stored globally. + } // + // + if(led_index < KEY_LED_COUNT && user_led_cur.state){ // `user_led_cur` is just for convenience + ro = user_led_cur.r; // + go = user_led_cur.g; // + bo = user_led_cur.b; // + } // + else if (led_lighting_mode == LED_MODE_KEYS_ONLY && led_cur->scan == 255) + { + //Do not act on this LED + } + else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && led_cur->scan != 255) + { + //Do not act on this LED + } + else if (led_lighting_mode == LED_MODE_INDICATORS_ONLY) + { + //Do not act on this LED (Only show indicators) + } + else + { + //Act on LED + for (fcur = 0; fcur < fmax; fcur++) + { + + if (led_animation_orientation) + { + po = led_cur->py; + } + else + { + po = led_cur->px; + } + + float pomod; + pomod = (float)(disp.frame % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; + + //Add in any moving effects + if ((!led_animation_direction && f[fcur].ef & EF_SCR_R) || (led_animation_direction && (f[fcur].ef & EF_SCR_L))) + { + pomod *= 100.0f; + pomod = (uint32_t)pomod % 10000; + pomod /= 100.0f; + + po -= pomod; + + if (po > 100) po -= 100; + else if (po < 0) po += 100; + } + else if ((!led_animation_direction && f[fcur].ef & EF_SCR_L) || (led_animation_direction && (f[fcur].ef & EF_SCR_R))) + { + pomod *= 100.0f; + pomod = (uint32_t)pomod % 10000; + pomod /= 100.0f; + po += pomod; + + if (po > 100) po -= 100; + else if (po < 0) po += 100; + } + + //Check if LED's po is in current frame + if (po < f[fcur].hs) continue; + if (po > f[fcur].he) continue; + //note: < 0 or > 100 continue + + //Calculate the po within the start-stop percentage for color blending + po = (po - f[fcur].hs) / (f[fcur].he - f[fcur].hs); + + //Add in any color effects + if (f[fcur].ef & EF_OVER) + { + ro = (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; + go = (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; + bo = (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; + } + else if (f[fcur].ef & EF_SUBTRACT) + { + ro -= (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; + go -= (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; + bo -= (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; + } + else + { + ro += (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; + go += (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; + bo += (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; + } + } + } + + //Clamp values 0-255 + if (ro > 255) ro = 255; else if (ro < 0) ro = 0; + if (go > 255) go = 255; else if (go < 0) go = 0; + if (bo > 255) bo = 255; else if (bo < 0) bo = 0; + + if (led_animation_breathing) + { + ro *= breathe_mult; + go *= breathe_mult; + bo *= breathe_mult; + } + + *led_cur->rgb.r = (uint8_t)ro; + *led_cur->rgb.g = (uint8_t)go; + *led_cur->rgb.b = (uint8_t)bo; + +#ifdef USB_LED_INDICATOR_ENABLE + if (keyboard_leds()) + { + uint8_t kbled = keyboard_leds(); + if ( + #if USB_LED_NUM_LOCK_SCANCODE != 255 + (led_cur->scan == USB_LED_NUM_LOCK_SCANCODE && kbled & (1<<USB_LED_NUM_LOCK)) || + #endif //NUM LOCK + #if USB_LED_CAPS_LOCK_SCANCODE != 255 + (led_cur->scan == USB_LED_CAPS_LOCK_SCANCODE && kbled & (1<<USB_LED_CAPS_LOCK)) || + #endif //CAPS LOCK + #if USB_LED_SCROLL_LOCK_SCANCODE != 255 + (led_cur->scan == USB_LED_SCROLL_LOCK_SCANCODE && kbled & (1<<USB_LED_SCROLL_LOCK)) || + #endif //SCROLL LOCK + #if USB_LED_COMPOSE_SCANCODE != 255 + (led_cur->scan == USB_LED_COMPOSE_SCANCODE && kbled & (1<<USB_LED_COMPOSE)) || + #endif //COMPOSE + #if USB_LED_KANA_SCANCODE != 255 + (led_cur->scan == USB_LED_KANA_SCANCODE && kbled & (1<<USB_LED_KANA)) || + #endif //KANA + (0)) + { + if (*led_cur->rgb.r > 127) *led_cur->rgb.r = 0; + else *led_cur->rgb.r = 255; + if (*led_cur->rgb.g > 127) *led_cur->rgb.g = 0; + else *led_cur->rgb.g = 255; + if (*led_cur->rgb.b > 127) *led_cur->rgb.b = 0; + else *led_cur->rgb.b = 255; + } + } +#endif //USB_LED_INDICATOR_ENABLE + + led_cur++; + led_this_run++; + } +} + +#define KEY_STROKES_LENGTH 20 +struct { + bool alive; + uint8_t led_id; + uint32_t time; +} KEY_STROKES[KEY_STROKES_LENGTH] = {{}}; + + + + +void set_led_rgb(uint8_t led_id, uint8_t r, uint8_t g, uint8_t b){ + issi3733_led_t *target_led = (led_map + led_id); + *target_led->rgb.r = r; + *target_led->rgb.g = g; + *target_led->rgb.b = b; +} + + +uint8_t DISTANCE_FROM_LAST_KEYSTROKE[KEY_LED_COUNT+1]; +void calculate_keystroke_distance(void){ + bool alive; + uint8_t led_id, period_passed; + uint32_t t; + + + for(uint8_t i = 0; i <= KEY_LED_COUNT; ++i){ + DISTANCE_FROM_LAST_KEYSTROKE[i] = 0; + } + + for(uint8_t i = 0; i < KEY_STROKES_LENGTH; ++i){ + if(KEY_STROKES[i].alive){ + t = timer_elapsed32(KEY_STROKES[i].time); + alive = 0; + led_id = KEY_STROKES[i].led_id; + period_passed = t / USER_CONFIG.WAVE_PERIOD; + + uint8_t delta_period; + for(uint8_t j = 1; j <= KEY_LED_COUNT; ++j){ + delta_period = period_passed - DISTANCE_MAP[led_id][j]; + if(( delta_period < USER_CONFIG.WAVE_FRONT_WIDTH) && ( + DISTANCE_MAP[led_id][j] <= USER_CONFIG.TRAVEL_DISTANCE + )){ + switch(USER_CONFIG.PATTERN_INDEX){ + case 3: + case 4: + case 5: + case 6: + DISTANCE_FROM_LAST_KEYSTROKE[j] += delta_period; + break; + default: + DISTANCE_FROM_LAST_KEYSTROKE[j] = 1; + break; + } + alive = 1; + } + } + KEY_STROKES[i].alive = alive; + } + } +} + +#define COLOR_PATTERN_RGB_COUNT 18 +static uint8_t COLOR_PATTERNS[][COLOR_PATTERN_RGB_COUNT][3] = { + { // default rainbow color + {255, 0, 0}, {255, 0, 0}, {255, 127, 0}, + {255, 127, 0}, {255, 255, 0}, {255, 255, 0}, + {120, 255, 0}, {120, 255, 0}, { 0, 255, 0}, + { 0, 255, 0}, { 0, 255, 120}, { 0, 255, 120}, + { 0, 0, 255}, { 0, 0, 255}, { 75, 0, 130}, + { 75, 0, 130}, { 43, 0, 130}, { 43, 0, 130}, + }, { // light rainbow color + {248, 12, 18}, {238, 17, 0}, {255, 51, 17}, + {255, 68, 32}, {255, 102, 68}, {255, 153, 51}, + {254, 174, 45}, {204, 187, 51}, {208, 195, 16}, + {170, 204, 34}, {105, 208, 37}, { 34, 204, 170}, + { 18, 189, 185}, { 17, 170, 187}, { 68, 68, 221}, + { 51, 17, 187}, { 59, 12, 189}, { 68, 34, 153}, + }, { // white flat + {255, 255, 255}, {255, 255, 255}, {255, 255, 255}, + {255, 255, 255}, {255, 255, 255}, {255, 255, 255}, + {255, 255, 255}, {255, 255, 255}, {255, 255, 255}, + {255, 255, 255}, {255, 255, 255}, {255, 255, 255}, + {255, 255, 255}, {255, 255, 255}, {255, 255, 255}, + {255, 255, 255}, {255, 255, 255}, {255, 255, 255}, + }, { // white fade, cos curve + {255, 255, 255}, {255, 255, 255}, {252, 252, 252}, + {247, 247, 247}, {240, 240, 240}, {232, 232, 232}, + {221, 221, 221}, {209, 209, 209}, {196, 196, 196}, + {181, 181, 181}, {164, 164, 164}, {147, 147, 147}, + {128, 128, 128}, {108, 108, 108}, { 88, 88, 88}, + { 66, 66, 66}, { 45, 45, 45}, { 23, 23, 23}, + }, +}; +static const uint8_t COLOR_PATTERNS_COUNT = ( + sizeof(COLOR_PATTERNS) / sizeof(COLOR_PATTERNS[0])); + +void set_user_led_rgb(uint8_t i, uint8_t r, uint8_t g, uint8_t b){ + USER_LED[i-1].state = 1; + USER_LED[i-1].r = r; + USER_LED[i-1].g = g; + USER_LED[i-1].b = b; +} +void unset_user_led_rgb(uint8_t i){ + USER_LED[i-1].state = 0; +} +void set_indicator_led_rgb(uint8_t i, + uint8_t layer, uint8_t r, uint8_t g, uint8_t b){ + USER_LED[i-1].state |= 1 << layer; + USER_LED[i-1].r = r; + USER_LED[i-1].g = g; + USER_LED[i-1].b = b; +} +void unset_indicator_led_rgb(uint8_t i, uint8_t layer){ + USER_LED[i-1].state &= ~(1 << layer); +} + +void refresh_pattern_indicators(void){ + static uint8_t GRV_123456[] = { + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + }; + + if(layer_state >= 0x04){ + for(uint8_t i = 0; i < 7; ++i){ + if(i == USER_CONFIG.PATTERN_INDEX){ + set_indicator_led_rgb(ktli(GRV_123456[i]), 2, 0, 0, 255); + } else{ + set_indicator_led_rgb(ktli(GRV_123456[i]), 2, 0, 255, 0); + } + } + } else{ + for(uint8_t i = 0; i < 7; ++i){ + unset_indicator_led_rgb(ktli(GRV_123456[i]), 2); + } + } +} +void refresh_color_pattern_indicators(void){ + static uint8_t ZXCVBNM_COMM_DOT[] = { + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, + }; + + if(layer_state >= 0x04){ + uint8_t (*c)[3] = &COLOR_PATTERNS[USER_CONFIG.COLOR_PATTERN_INDEX][0]; + for(uint8_t i = 0; i < 9; ++i){ + set_indicator_led_rgb(ktli(ZXCVBNM_COMM_DOT[i]), + 2, c[i][0], c[i][1], c[i][2]); + } + } else{ + for(uint8_t i = 0; i < 9; ++i){ + unset_indicator_led_rgb(ktli(ZXCVBNM_COMM_DOT[i]), 2); + } + } +} + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + static uint32_t scan_timer = 0; + static uint8_t last_layer = 0; + + uint8_t layer = 0; + if(layer_state >= 0x04){ + layer = 2; + } else if(layer_state >= 0x02){ + layer = 1; + } + + calculate_keystroke_distance(); + + + #define USE_PATTERN 0 + #define BLACK_RGB 1 + #define COLOR_RGB 2 + uint8_t ci; // color index + uint8_t *rgb; + uint8_t handle_type; + uint8_t distance; + for(uint8_t i = 1; i <= KEY_LED_COUNT; ++i){ + if(USER_LED[i-1].state >= 2) continue; + + handle_type = USE_PATTERN; + distance = DISTANCE_FROM_LAST_KEYSTROKE[i]; + + switch(USER_CONFIG.PATTERN_INDEX){ + case 0: handle_type = USE_PATTERN; break; + case 1: handle_type = distance ? USE_PATTERN : BLACK_RGB; break; + case 2: handle_type = distance ? BLACK_RGB : USE_PATTERN; break; + case 3: handle_type = distance ? COLOR_RGB : BLACK_RGB; break; + case 4: handle_type = distance ? COLOR_RGB : USE_PATTERN; break; + case 5: + case 6: handle_type = distance ? COLOR_RGB : USE_PATTERN; break; + } + switch(handle_type){ + case USE_PATTERN: unset_user_led_rgb(i); break; + case BLACK_RGB: set_user_led_rgb(i, 0, 0, 0); break; + case COLOR_RGB: + ci = (DISTANCE_FROM_LAST_KEYSTROKE[i] * COLOR_PATTERN_RGB_COUNT / + USER_CONFIG.WAVE_FRONT_WIDTH) % COLOR_PATTERN_RGB_COUNT; + rgb = &COLOR_PATTERNS[USER_CONFIG.COLOR_PATTERN_INDEX][ci][0]; + + set_user_led_rgb(i, rgb[0], rgb[1], rgb[2]); + break; + } + } + + + // could be moved to process_record_user() + if(layer != last_layer){ + + static uint8_t QWEASDP[] = { + KC_Q, KC_W, KC_E, KC_A, KC_S, KC_D, KC_P, + }; + static uint8_t YUIOHJKL[] = { + KC_Y, KC_U, KC_I, KC_O, KC_H, KC_J, KC_K, KC_L, + }; + + switch(last_layer){ + case 1: + for(uint8_t i = 0; i < 7; ++i){ + unset_indicator_led_rgb(ktli(QWEASDP[i]), 1); + } + break; + case 2: + for(uint8_t i = 0; i < 6; ++i){ + unset_indicator_led_rgb(ktli(QWEASDP[i]), 2); + } + for(uint8_t i = 0; i < 8; ++i){ + unset_indicator_led_rgb(ktli(YUIOHJKL[i]), 2); + } + unset_indicator_led_rgb(ktli(KC_TAB), 2); + unset_indicator_led_rgb(ktli(KC_CAPS), 2); + break; + } + + + switch(layer){ + case 1: + for(uint8_t i = 0; i < 7; ++i){ + set_indicator_led_rgb(ktli(QWEASDP[i]), 1, 255, 0, 0); + } + break; + case 2: + for(uint8_t i = 0; i < 6; ++i){ + set_indicator_led_rgb(ktli(QWEASDP[i]), 2, 0, 255, 0); + } + for(uint8_t i = 0; i < 8; ++i){ + set_indicator_led_rgb(ktli(YUIOHJKL[i]), 2, 0, 255, 0); + } + set_indicator_led_rgb(ktli(KC_TAB), 2, 0, 255, 0); + set_indicator_led_rgb(ktli(KC_CAPS), 2, 0, 255, 0); + break; + } + + refresh_pattern_indicators(); + refresh_color_pattern_indicators(); + last_layer = layer; + } + + + switch(layer){ + case 0: + if(timer_elapsed32(scan_timer) > 2000){ + scan_timer = timer_read32(); + } else if(timer_elapsed32(scan_timer) > 1000){ + // set_user_led_rgb(ktli(KC_F5), 255, 255, 255); + } + break; + case 1: + break; + case 2: + break; + } + +}; + +#define MODS_SHIFT (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + + + + + + + + + + + + + + + + + + case L_SP_PR: // previous dripple pattern + case L_SP_NE: // next dripple pattern + if (record->event.pressed) { +#define PATTERN_COUNT 7 + uint8_t incre = keycode == L_SP_PR ? PATTERN_COUNT-1 : 1; + USER_CONFIG.PATTERN_INDEX += incre; + USER_CONFIG.PATTERN_INDEX %= PATTERN_COUNT; + + if(USER_CONFIG.PATTERN_INDEX <= 4){ + USER_CONFIG.TRAVEL_DISTANCE = 25; + USER_CONFIG.COLOR_PATTERN_INDEX = 0; + USER_CONFIG.WAVE_PERIOD = 50; + } + + switch(USER_CONFIG.PATTERN_INDEX){ + case 0: // None + break; + case 1: // background off, wave on + USER_CONFIG.WAVE_FRONT_WIDTH = 2; + break; + case 2: // background on, wave off + USER_CONFIG.WAVE_FRONT_WIDTH = 5; + break; + case 3: // background off, rainbow wave + USER_CONFIG.WAVE_FRONT_WIDTH = 10; + break; + case 4: // background on, rainbow wave + USER_CONFIG.WAVE_FRONT_WIDTH = 10; + break; + case 5: + USER_CONFIG.WAVE_FRONT_WIDTH = 10; + + USER_CONFIG.COLOR_PATTERN_INDEX = 2; + USER_CONFIG.TRAVEL_DISTANCE = 0; + USER_CONFIG.WAVE_PERIOD = 100; + break; + case 6: + USER_CONFIG.WAVE_FRONT_WIDTH = 25; + + USER_CONFIG.COLOR_PATTERN_INDEX = 3; + USER_CONFIG.TRAVEL_DISTANCE = 2; + USER_CONFIG.WAVE_PERIOD = 10; + break; + } + + // remove effect after changing pattern + for(int i = 0; i < KEY_STROKES_LENGTH; ++i){ + KEY_STROKES[i].alive = 0; + } + refresh_pattern_indicators(); + refresh_color_pattern_indicators(); + } + return false; + case L_SP_WD: + case L_SP_NW: + if(record->event.pressed){ + short incre = keycode == L_SP_WD ? 1 : -1; + USER_CONFIG.WAVE_FRONT_WIDTH += incre; + if(USER_CONFIG.WAVE_FRONT_WIDTH < 1){ + USER_CONFIG.WAVE_FRONT_WIDTH = 1; + } + } + return false; + case L_SP_FA: + case L_SP_SL: + if(record->event.pressed){ + short incre = keycode == L_SP_FA ? -1 : 1; + + USER_CONFIG.WAVE_PERIOD += 10 * incre; + if(USER_CONFIG.WAVE_PERIOD < 10){ + USER_CONFIG.WAVE_PERIOD = 10; + } + } + return false; + // these are the keys not in range 0x04 - 0x52 + case L_CP_PR: + case L_CP_NX: + if(record->event.pressed){ + uint8_t incre = keycode == L_CP_PR ? COLOR_PATTERNS_COUNT - 1 : 1; + USER_CONFIG.COLOR_PATTERN_INDEX += incre; + USER_CONFIG.COLOR_PATTERN_INDEX %= COLOR_PATTERNS_COUNT; + refresh_color_pattern_indicators(); + } + return false; + default: + if (record->event.pressed){ + uint8_t led_id = ktli(keycode); + if(led_id){ + for(int i = 0; i < KEY_STROKES_LENGTH; ++i){ + if(!KEY_STROKES[i].alive){ + KEY_STROKES[i].alive = 1; + KEY_STROKES[i].led_id = led_id; + KEY_STROKES[i].time = timer_read32(); + break; + } + } + } + } + return true; //Process all other keycodes normally + } +} diff --git a/keyboards/massdrop/ctrl/led_programs.c b/keyboards/massdrop/ctrl/led_programs.c new file mode 100644 index 0000000000..ca27016454 --- /dev/null +++ b/keyboards/massdrop/ctrl/led_programs.c @@ -0,0 +1,120 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "ctrl.h" +#include "led_matrix.h" + +//Teal <-> Salmon +led_setup_t leds_teal_salmon[] = { + { .hs = 0, .he = 33, .rs = 24, .re = 24, .gs = 215, .ge = 215, .bs = 204, .be = 204, .ef = EF_NONE }, + { .hs = 33, .he = 66, .rs = 24, .re = 255, .gs = 215, .ge = 114, .bs = 204, .be = 118, .ef = EF_NONE }, + { .hs = 66, .he = 100, .rs = 255, .re = 255, .gs = 114, .ge = 114, .bs = 118, .be = 118, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Yellow +led_setup_t leds_yellow[] = { + { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Off +led_setup_t leds_off[] = { + { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Red +led_setup_t leds_red[] = { + { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Green +led_setup_t leds_green[] = { + { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE }, + { .end = 1 }, +}; + +//Blue +led_setup_t leds_blue[] = { + { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_NONE }, + { .end = 1 }, +}; + +//White +led_setup_t leds_white[] = { + { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE }, + { .end = 1 }, +}; + +//White with moving red stripe +led_setup_t leds_white_with_red_stripe[] = { + { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE }, + { .hs = 0, .he = 15, .rs = 0, .re = 0, .gs = 0, .ge = 255, .bs = 0, .be = 255, .ef = EF_SCR_R | EF_SUBTRACT }, + { .hs = 15, .he = 30, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 0, .ef = EF_SCR_R | EF_SUBTRACT }, + { .end = 1 }, +}; + +//Black with moving red stripe +led_setup_t leds_black_with_red_stripe[] = { + { .hs = 0, .he = 15, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R }, + { .hs = 15, .he = 30, .rs = 255, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R }, + { .end = 1 }, +}; + +//Rainbow no scrolling +led_setup_t leds_rainbow_ns[] = { + { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER }, + { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER }, + { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER }, + { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER }, + { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER }, + { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER }, + { .end = 1 }, +}; + +//Rainbow scrolling +led_setup_t leds_rainbow_s[] = { + { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R }, + { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R }, + { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER | EF_SCR_R }, + { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R }, + { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R }, + { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER | EF_SCR_R }, + { .end = 1 }, +}; + +//Add new LED animations here using one from above as example +//The last entry must be { .end = 1 } +//Add the new animation name to the list below following its format + +void *led_setups[] = { + leds_rainbow_s, + leds_rainbow_ns, + leds_teal_salmon, + leds_yellow, + leds_red, + leds_green, + leds_blue, + leds_white, + leds_white_with_red_stripe, + leds_black_with_red_stripe, + leds_off +}; + +const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]); diff --git a/keyboards/massdrop/ctrl/matrix.c b/keyboards/massdrop/ctrl/matrix.c new file mode 100644 index 0000000000..5f1741e58a --- /dev/null +++ b/keyboards/massdrop/ctrl/matrix.c @@ -0,0 +1,176 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "ctrl.h" + +#include "d51_util.h" +#include "debug.h" +#include "clks.h" +#include <string.h> + +matrix_row_t mlatest[MATRIX_ROWS]; +matrix_row_t mlast[MATRIX_ROWS]; +matrix_row_t mdebounced[MATRIX_ROWS]; + +uint8_t row_ports[] = { MATRIX_ROW_PORTS }; +uint8_t row_pins[] = { MATRIX_ROW_PINS }; +uint8_t col_ports[] = { MATRIX_COL_PORTS }; +uint8_t col_pins[] = { MATRIX_COL_PINS }; +uint32_t row_masks[2]; //NOTE: If more than PA PB used in the future, adjust code to accomodate + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +void matrix_init(void) +{ + memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(mlast, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(mdebounced, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + + row_masks[PA] = 0; + row_masks[PB] = 0; + + uint8_t row; + for (row = 0; row < MATRIX_ROWS; row++) + { + PORT->Group[row_ports[row]].DIRCLR.reg = 1 << row_pins[row]; //Input + PORT->Group[row_ports[row]].OUTCLR.reg = 1 << row_pins[row]; //Low + PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.INEN = 1; //Input Enable, + PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.PULLEN = 1; //Pull Enable + row_masks[row_ports[row]] |= 1 << row_pins[row]; //Add pin to proper row mask + } + + uint8_t col; + for (col = 0; col < MATRIX_COLS; col++) + { + PORT->Group[col_ports[col]].DIRSET.reg = 1 << col_pins[col]; //Output + PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Low + } + + matrix_init_quantum(); +} + +uint64_t mdebouncing = 0; +uint8_t matrix_scan(void) +{ + uint8_t mchanged; + uint8_t row; + uint8_t col; + uint32_t scans[2]; //PA PB + + if (timer_read64() < mdebouncing) return 1; //mdebouncing == 0 when no debouncing active + + memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); //Zero the result buffer + + for (col = 0; col < MATRIX_COLS; col++) + { + PORT->Group[col_ports[col]].OUTSET.reg = 1 << col_pins[col]; //Set col output + + wait_us(1); //Delay for output + + scans[PA] = PORT->Group[PA].IN.reg & row_masks[PA]; //Read PA row pins data + scans[PB] = PORT->Group[PB].IN.reg & row_masks[PB]; //Read PB row pins data + + PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Clear col output + + for (row = 0; row < MATRIX_ROWS; row++) + { + //Move scan bits from scans array into proper row bit locations + if (scans[row_ports[row]] & (1 << row_pins[row])) + mlatest[row] |= 1 << col; + } + } + + mchanged = 0; //Default to no matrix change since last + + for (row = 0; row < MATRIX_ROWS; row++) + { + if (mlast[row] != mlatest[row]) + mchanged = 1; + mlast[row] = mlatest[row]; + } + + if (!mchanged) + { + for (row = 0; row < MATRIX_ROWS; row++) + mdebounced[row] = mlatest[row]; + mdebouncing = 0; + } + else + { + //Begin or extend debounce on change + mdebouncing = timer_read64() + DEBOUNCING_DELAY; + } + + matrix_scan_quantum(); + + return 1; +} + +matrix_row_t matrix_get_row(uint8_t row) +{ + return mdebounced[row]; +} + +void matrix_print(void) +{ + char buf[(MATRIX_COLS+8)*(MATRIX_ROWS+1)] = "R C"; + char *pbuf = buf+3; + uint32_t cols; + uint32_t rows; + matrix_row_t row; + + for (cols = 1; cols <= MATRIX_COLS; cols++) + { + *pbuf = (cols%10)+48; + pbuf++; + } + *pbuf = '\r'; pbuf++; + *pbuf = '\n'; pbuf++; + + for (rows = 1; rows <= MATRIX_ROWS; rows++) + { + row = matrix_get_row(rows-1); + if (rows < 10) { *pbuf = rows+48; pbuf++; *pbuf = ' '; pbuf++; *pbuf = ' '; pbuf++; } + else { *pbuf = (rows/10)+48; pbuf++; *pbuf = (rows%10)+48; pbuf++; *pbuf = ' '; pbuf++; } + for (cols = 0; cols < MATRIX_COLS; cols++) + { + if (row & 1 << cols) *pbuf = 'X'; + else *pbuf = '.'; + pbuf++; + } + *pbuf = '\r'; pbuf++; + *pbuf = '\n'; pbuf++; + } + *pbuf = 0; + dprint(buf); +} diff --git a/keyboards/massdrop/ctrl/matrix.h b/keyboards/massdrop/ctrl/matrix.h new file mode 100644 index 0000000000..3eab6dece1 --- /dev/null +++ b/keyboards/massdrop/ctrl/matrix.h @@ -0,0 +1,77 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef MATRIX_H +#define MATRIX_H + +#include <stdint.h> +#include <stdbool.h> +#include "keyboard.h" + +#if (MATRIX_COLS <= 8) +typedef uint8_t matrix_row_t; +#elif (MATRIX_COLS <= 16) +typedef uint16_t matrix_row_t; +#elif (MATRIX_COLS <= 32) +typedef uint32_t matrix_row_t; +#else +#error "MATRIX_COLS: invalid value" +#endif + +#define MATRIX_IS_ON(row, col) (matrix_get_row(row) && (1<<col)) + +#ifdef __cplusplus +extern "C" { +#endif + +/* number of matrix rows */ +uint8_t matrix_rows(void); +/* number of matrix columns */ +uint8_t matrix_cols(void); +/* should be called at early stage of startup before matrix_init.(optional) */ +void matrix_setup(void); +/* intialize matrix for scaning. */ +void matrix_init(void); +/* scan all key states on matrix */ +uint8_t matrix_scan(void); +/* whether modified from previous scan. used after matrix_scan. */ +bool matrix_is_modified(void) __attribute__ ((deprecated)); +/* whether a switch is on */ +bool matrix_is_on(uint8_t row, uint8_t col); +/* matrix state on row */ +matrix_row_t matrix_get_row(uint8_t row); +/* print matrix for debug */ +void matrix_print(void); + +/* power control */ +void matrix_power_up(void); +void matrix_power_down(void); + +/* executes code for Quantum */ +void matrix_init_quantum(void); +void matrix_scan_quantum(void); + +void matrix_init_kb(void); +void matrix_scan_kb(void); + +void matrix_init_user(void); +void matrix_scan_user(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/keyboards/massdrop/ctrl/readme.md b/keyboards/massdrop/ctrl/readme.md new file mode 100644 index 0000000000..656ef9ac9f --- /dev/null +++ b/keyboards/massdrop/ctrl/readme.md @@ -0,0 +1,20 @@ +# CTRL + + + +The Massdrop CTRL is a TKL mechanical keyboard featuring dual USB-C connectors, an integrated Hi-Speed USB 2.0 hub, and fully customizable RGB backlighting and underlighting. + +Keyboard Maintainer: [Massdrop](https://github.com/massdrop) +Hardware Supported: Massdrop, Inc. CTRL PCBs utilizing Microchip's ATSAMD51J18A MCU and USB2422 2-Port USB 2.0 Hi-Speed Hub Controller, and ISSI's IS31FL3733 LED Drivers. +Hardware Availability: [Massdrop CTRL Mechanical Keyboard](https://www.massdrop.com/buy/massdrop-ctrl-mechanical-keyboard) + +Make example for this keyboard (after setting up your build environment): + + make massdrop/ctrl:default + +For information on flashing this keyboard, visit the following links: + +[Massdrop Loader Releases](https://github.com/Massdrop/mdloader/releases/tag/0.0.1) +[Massdrop Loader Repository and Instructions](https://github.com/Massdrop/mdloader) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk new file mode 100644 index 0000000000..c5539158f5 --- /dev/null +++ b/keyboards/massdrop/ctrl/rules.mk @@ -0,0 +1,33 @@ +# project specific files +SRC = led_programs.c +SRC += matrix.c + +#For platform and packs +ARM_ATSAM = SAMD51J18A +MCU = cortex-m4 + +CUSTOM_MATRIX = yes + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +VIRTSER_ENABLE = no # USB Serial Driver +RAW_ENABLE = no # Raw device +AUTO_SHIFT_ENABLE = no # Auto Shift |