diff options
Diffstat (limited to 'keyboards/massdrop/alt')
| -rw-r--r-- | keyboards/massdrop/alt/alt.h | 2 | ||||
| -rw-r--r-- | keyboards/massdrop/alt/config.h | 30 | ||||
| -rw-r--r-- | keyboards/massdrop/alt/config_led.h | 37 | ||||
| -rw-r--r-- | keyboards/massdrop/alt/keymaps/default_md/keymap.c | 95 | ||||
| -rw-r--r-- | keyboards/massdrop/alt/keymaps/mac_md/keymap.c | 87 |
5 files changed, 210 insertions, 41 deletions
diff --git a/keyboards/massdrop/alt/alt.h b/keyboards/massdrop/alt/alt.h index 0396095450..c3761bee8b 100644 --- a/keyboards/massdrop/alt/alt.h +++ b/keyboards/massdrop/alt/alt.h @@ -7,7 +7,7 @@ #include "i2c_master.h" #include "md_rgb_matrix.h" //For led keycodes #include "usb/udi_cdc.h" -#include "usb/usb2422.h" +#include "usb/usb_hub.h" #define LAYOUT_65_ansi_blocker( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \ diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index d28094c492..1a0a7c9768 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -43,6 +43,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Temporary solution for matrix delay */ #define IGNORE_ATOMIC_BLOCK +/* Avoid out-of-bounds errors when SmartEEPROM is not enabled */ +#define EEPROM_SIZE 1024 + /* MCU Port name definitions */ #define PA 0 #define PB 1 @@ -50,22 +53,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* This Shift Register expands available hardware output lines to control additional peripherals */ /* It uses four lines from the MCU to provide 16 output lines */ /* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */ -#define SR_EXP_RCLK_PORT PB -#define SR_EXP_RCLK_PIN 14 +#define SR_EXP_RCLK_PIN B14 /* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */ -#define SR_EXP_OE_N_PORT PB -#define SR_EXP_OE_N_PIN 15 +#define SR_EXP_OE_PIN B15 /* SERCOM port to use for Shift Register SPI */ /* DATAOUT and SCLK must be configured to use hardware pins of this port */ -#define SR_EXP_SERCOM SERCOM2 +#define SPI_SERCOM SERCOM2 /* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */ -#define SR_EXP_DATAOUT_PORT PA -#define SR_EXP_DATAOUT_PIN 12 -#define SR_EXP_DATAOUT_MUX 2 +#define SPI_DATAOUT_PIN A12 +#define SPI_DATAOUT_MUX 2 /* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */ -#define SR_EXP_SCLK_PORT PA -#define SR_EXP_SCLK_PIN 13 -#define SR_EXP_SCLK_MUX 2 +#define SPI_SCLK_PIN A13 +#define SPI_SCLK_MUX 2 /* Debug LED (Small LED Located near MCU) */ #define DEBUG_LED_ENABLE 1 @@ -94,6 +93,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DEBUG_BOOT_TRACING_PORT PB #define DEBUG_BOOT_TRACING_PIN 23 +/* USB2422 config */ +#define USB2422_ADDRESS 0x58 +#define USB2422_VENDOR_ID 0x04D8 +#define USB2422_PRODUCT_ID 0xEEC5 +#define USB2422_DEVICE_VER 0x0101 +#define USB2422_MANUFACTURER "Massdrop Inc." +#define USB2422_PRODUCT "Massdrop Hub" +#define USB2422_ACTIVE_PIN A18 + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/massdrop/alt/config_led.h b/keyboards/massdrop/alt/config_led.h index 82117b3327..b600dd23b9 100644 --- a/keyboards/massdrop/alt/config_led.h +++ b/keyboards/massdrop/alt/config_led.h @@ -58,7 +58,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //swr: Matrix wiring SW Red row (1-12) //swg: Matrix wiring SW Green row (1-12) //swb: Matrix wiring SW Blue row (1-12) -//scan: Associated key scancode if any +//scan: Associated key matrix scancode (set 255 if none or 254 for LED to turn off in alternating mode) //Note: Origin 0,0 may be located anywhere as the software will do the final layout #define ISSI3733_LED_MAP { \ { .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \ @@ -129,46 +129,45 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. { .id = 66, .x = 10.5, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 73 }, \ { .id = 67, .x = 11.25, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 74 }, \ { .id = 68, .x = -0.338, .y = -3.338, .adr = { .drv = 2, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ - { .id = 69, .x = 0.39, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 69, .x = 0.39, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \ { .id = 70, .x = 1.263, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ - { .id = 71, .x = 2.135, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 71, .x = 2.135, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 72, .x = 3.008, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 73, .x = 3.88, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 73, .x = 3.88, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 74, .x = 4.753, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ - { .id = 75, .x = 5.625, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 75, .x = 5.625, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \ { .id = 76, .x = 6.497, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ - { .id = 77, .x = 7.37, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 77, .x = 7.37, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 78, .x = 8.242, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 79, .x = 9.115, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 79, .x = 9.115, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 80, .x = 9.987, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ - { .id = 81, .x = 10.86, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 81, .x = 10.86, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 82, .x = 11.588, .y = -3.338, .adr = { .drv = 1, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ - { .id = 83, .x = 11.693, .y = -2.623, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 83, .x = 11.693, .y = -2.623, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 254 }, \ { .id = 84, .x = 11.693, .y = -1.873, .adr = { .drv = 1, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ { .id = 85, .x = 11.693, .y = -1.123, .adr = { .drv = 1, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ - { .id = 86, .x = 11.693, .y = -0.373, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 86, .x = 11.693, .y = -0.373, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 87, .x = 11.588, .y = 0.338, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ { .id = 88, .x = 9.908, .y = 0.443, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 89, .x = 9.288, .y = 0.443, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 89, .x = 9.288, .y = 0.443, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 90, .x = 8.625, .y = 0.443, .adr = { .drv = 1, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 91, .x = 7.875, .y = 0.443, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 91, .x = 7.875, .y = 0.443, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 92, .x = 7.125, .y = 0.443, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 93, .x = 6.375, .y = 0.443, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 93, .x = 6.375, .y = 0.443, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 94, .x = 5.625, .y = 0.443, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 95, .x = 4.875, .y = 0.443, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 95, .x = 4.875, .y = 0.443, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 96, .x = 4.125, .y = 0.443, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 97, .x = 3.375, .y = 0.443, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 97, .x = 3.375, .y = 0.443, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 98, .x = 2.625, .y = 0.443, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 99, .x = 1.875, .y = 0.443, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 99, .x = 1.875, .y = 0.443, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 100, .x = 1.125, .y = 0.443, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ { .id = 101, .x = -0.338, .y = 0.338, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 102, .x = -0.443, .y = -0.373, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 102, .x = -0.443, .y = -0.373, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 103, .x = -0.443, .y = -1.123, .adr = { .drv = 2, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ { .id = 104, .x = -0.443, .y = -1.873, .adr = { .drv = 2, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ - { .id = 105, .x = -0.443, .y = -2.623, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 105, .x = -0.443, .y = -2.623, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 254 }, \ }; - #define USB_LED_INDICATOR_ENABLE //Comment out to disable indicator functionality #ifdef USB_LED_INDICATOR_ENABLE //Scan codes refer to actual key matrix codes, not KC_* (255 to disable) #define USB_LED_NUM_LOCK_SCANCODE 255 diff --git a/keyboards/massdrop/alt/keymaps/default_md/keymap.c b/keyboards/massdrop/alt/keymaps/default_md/keymap.c index 810585a3df..fa8b294cd1 100644 --- a/keyboards/massdrop/alt/keymaps/default_md/keymap.c +++ b/keyboards/massdrop/alt/keymaps/default_md/keymap.c @@ -3,10 +3,15 @@ enum alt_keycodes { L_BRI = SAFE_RANGE, //LED Brightness Increase //Working L_BRD, //LED Brightness Decrease //Working + L_EDG_I, //LED Edge Brightness Increase + L_EDG_D, //LED Edge Brightness Decrease + L_EDG_M, //LED Edge lighting mode L_PTN, //LED Pattern Select Next //Working L_PTP, //LED Pattern Select Previous //Working L_PSI, //LED Pattern Speed Increase //Working L_PSD, //LED Pattern Speed Decrease //Working + L_RATIOD, + L_RATIOI, L_T_MD, //LED Toggle Mode //Working L_T_ONF, //LED Toggle On / Off //Broken L_ON, //LED On //Broken @@ -18,6 +23,7 @@ enum alt_keycodes { DBG_MTRX, //DEBUG Toggle Matrix Prints // DBG_KBD, //DEBUG Toggle Keyboard Prints // DBG_MOU, //DEBUG Toggle Mouse Prints // + DBG_FAC, //DEBUG Factory light testing (All on white) MD_BOOT //Restart into bootloader after hold timeout //Working }; @@ -31,10 +37,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ - _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ - _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, DBG_FAC, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( @@ -53,6 +59,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; + static uint8_t scroll_effect = 0; + + switch (keycode) { + case L_BRI ... U_T_AGCR: + if (record->event.pressed) { + md_led_changed(); + } + break; + } switch (keycode) { case L_BRI: @@ -69,6 +84,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (led_animation_breathing) gcr_breathe = gcr_desired; } return false; + case L_EDG_M: + if (record->event.pressed) { + led_edge_mode++; + if (led_edge_mode > LED_EDGE_MODE_MAX) { + led_edge_mode = LED_EDGE_MODE_ALL; + } + } + return false; + case L_EDG_I: + if (record->event.pressed) { + led_edge_brightness += 0.1; + if (led_edge_brightness > 1) { led_edge_brightness = 1; } + } + return false; + case L_EDG_D: + if (record->event.pressed) { + led_edge_brightness -= 0.1; + if (led_edge_brightness < 0) { led_edge_brightness = 0; } + } + return false; + case L_RATIOI: + if (record->event.pressed) { + led_ratio_brightness += 0.2; + if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; } + } + return false; + case L_RATIOD: + if (record->event.pressed) { + led_ratio_brightness -= 0.2; + if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; } + } + return false; case L_PTN: if (record->event.pressed) { if (led_animation_id == led_setups_count - 1) led_animation_id = 0; @@ -128,7 +175,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; case L_T_PTD: if (record->event.pressed) { - led_animation_direction = !led_animation_direction; + scroll_effect++; + if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left) + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 0; + } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom) + led_animation_direction = 1; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top) + led_animation_direction = 0; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 4) { //Patterns with scroll explode from center + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 1; + } else if (scroll_effect == 5) { //Patterns with scroll implode on center + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 1; + } else { //Patterns with scroll move horizontal (Left to right) + scroll_effect = 0; + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 0; + } } return false; case U_T_AGCR: @@ -136,6 +209,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); } return false; + case DBG_FAC: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + led_lighting_mode = LED_MODE_NORMAL; + led_edge_brightness = 1; + led_edge_mode = LED_EDGE_MODE_ALL; + led_animation_breathing = 0; + led_animation_id = 7; //led_programs.c led_setups leds_white index + gcr_desired = LED_GCR_MAX; + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; case DBG_TOG: if (record->event.pressed) { TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); diff --git a/keyboards/massdrop/alt/keymaps/mac_md/keymap.c b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c index b3626c1b61..bfcadf8900 100644 --- a/keyboards/massdrop/alt/keymaps/mac_md/keymap.c +++ b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c @@ -3,10 +3,15 @@ enum alt_keycodes { L_BRI = SAFE_RANGE, //LED Brightness Increase //Working L_BRD, //LED Brightness Decrease //Working + L_EDG_I, //LED Edge Brightness Increase + L_EDG_D, //LED Edge Brightness Decrease + L_EDG_M, //LED Edge lighting mode L_PTN, //LED Pattern Select Next //Working L_PTP, //LED Pattern Select Previous //Working L_PSI, //LED Pattern Speed Increase //Working L_PSD, //LED Pattern Speed Decrease //Working + L_RATIOD, + L_RATIOI, L_T_MD, //LED Toggle Mode //Working L_T_ONF, //LED Toggle On / Off //Broken L_ON, //LED On //Broken @@ -18,6 +23,7 @@ enum alt_keycodes { DBG_MTRX, //DEBUG Toggle Matrix Prints // DBG_KBD, //DEBUG Toggle Keyboard Prints // DBG_MOU, //DEBUG Toggle Mouse Prints // + DBG_FAC, //DEBUG Factory light testing (All on white) MD_BOOT //Restart into bootloader after hold timeout //Working }; @@ -31,10 +37,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ - _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ - _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, DBG_FAC, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( @@ -53,6 +59,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; + static uint8_t scroll_effect = 0; switch (keycode) { case L_BRI: @@ -69,6 +76,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (led_animation_breathing) gcr_breathe = gcr_desired; } return false; + case L_EDG_M: + if (record->event.pressed) { + led_edge_mode++; + if (led_edge_mode > LED_EDGE_MODE_MAX) { + led_edge_mode = LED_EDGE_MODE_ALL; + } + } + return false; + case L_EDG_I: + if (record->event.pressed) { + led_edge_brightness += 0.1; + if (led_edge_brightness > 1) { led_edge_brightness = 1; } + } + return false; + case L_EDG_D: + if (record->event.pressed) { + led_edge_brightness -= 0.1; + if (led_edge_brightness < 0) { led_edge_brightness = 0; } + } + return false; + case L_RATIOI: + if (record->event.pressed) { + led_ratio_brightness += 0.2; + if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; } + } + return false; + case L_RATIOD: + if (record->event.pressed) { + led_ratio_brightness -= 0.2; + if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; } + } + return false; case L_PTN: if (record->event.pressed) { if (led_animation_id == led_setups_count - 1) led_animation_id = 0; @@ -128,7 +167,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; case L_T_PTD: if (record->event.pressed) { - led_animation_direction = !led_animation_direction; + scroll_effect++; + if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left) + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 0; + } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom) + led_animation_direction = 1; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top) + led_animation_direction = 0; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 4) { //Patterns with scroll explode from center + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 1; + } else if (scroll_effect == 5) { //Patterns with scroll implode on center + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 1; + } else { //Patterns with scroll move horizontal (Left to right) + scroll_effect = 0; + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 0; + } } return false; case U_T_AGCR: @@ -136,6 +201,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); } return false; + case DBG_FAC: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + led_lighting_mode = LED_MODE_NORMAL; + led_edge_brightness = 1; + led_edge_mode = LED_EDGE_MODE_ALL; + led_animation_breathing = 0; + led_animation_id = 7; //led_programs.c led_setups leds_white index + gcr_desired = LED_GCR_MAX; + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; case DBG_TOG: if (record->event.pressed) { TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); |