summaryrefslogtreecommitdiff
path: root/keyboards/massdrop/alt/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/massdrop/alt/config.h')
-rw-r--r--keyboards/massdrop/alt/config.h78
1 files changed, 67 insertions, 11 deletions
diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h
index d28094c492..df3cd891b6 100644
--- a/keyboards/massdrop/alt/config.h
+++ b/keyboards/massdrop/alt/config.h
@@ -43,6 +43,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Temporary solution for matrix delay */
#define IGNORE_ATOMIC_BLOCK
+/* Avoid out-of-bounds errors when SmartEEPROM is not enabled */
+#define EEPROM_SIZE 1024
+
/* MCU Port name definitions */
#define PA 0
#define PB 1
@@ -50,22 +53,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* This Shift Register expands available hardware output lines to control additional peripherals */
/* It uses four lines from the MCU to provide 16 output lines */
/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
-#define SR_EXP_RCLK_PORT PB
-#define SR_EXP_RCLK_PIN 14
+#define SR_EXP_RCLK_PIN B14
/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
-#define SR_EXP_OE_N_PORT PB
-#define SR_EXP_OE_N_PIN 15
+#define SR_EXP_OE_PIN B15
/* SERCOM port to use for Shift Register SPI */
/* DATAOUT and SCLK must be configured to use hardware pins of this port */
-#define SR_EXP_SERCOM SERCOM2
+#define SPI_SERCOM SERCOM2
/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
-#define SR_EXP_DATAOUT_PORT PA
-#define SR_EXP_DATAOUT_PIN 12
-#define SR_EXP_DATAOUT_MUX 2
+#define SPI_DATAOUT_PIN A12
+#define SPI_DATAOUT_MUX 2
/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
-#define SR_EXP_SCLK_PORT PA
-#define SR_EXP_SCLK_PIN 13
-#define SR_EXP_SCLK_MUX 2
+#define SPI_SCLK_PIN A13
+#define SPI_SCLK_MUX 2
/* Debug LED (Small LED Located near MCU) */
#define DEBUG_LED_ENABLE 1
@@ -94,6 +93,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEBUG_BOOT_TRACING_PORT PB
#define DEBUG_BOOT_TRACING_PIN 23
+/* USB2422 config */
+#define USB2422_ADDRESS 0x58
+#define USB2422_VENDOR_ID 0x04D8
+#define USB2422_PRODUCT_ID 0xEEC5
+#define USB2422_DEVICE_VER 0x0101
+#define USB2422_MANUFACTURER "Massdrop Inc."
+#define USB2422_PRODUCT "Massdrop Hub"
+#define USB2422_ACTIVE_PIN A18
+
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
@@ -126,5 +134,53 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_MATRIX_KEYPRESSES
#define RGB_MATRIX_LED_PROCESS_LIMIT 15
#define RGB_MATRIX_LED_FLUSH_LIMIT 10
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+# define ENABLE_RGB_MATRIX_ALPHAS_MODS
+# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_BREATHING
+# define ENABLE_RGB_MATRIX_BAND_SAT
+# define ENABLE_RGB_MATRIX_BAND_VAL
+# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+# define ENABLE_RGB_MATRIX_CYCLE_ALL
+# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+# define ENABLE_RGB_MATRIX_DUAL_BEACON
+# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+# define ENABLE_RGB_MATRIX_RAINDROPS
+# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+# define ENABLE_RGB_MATRIX_HUE_BREATHING
+# define ENABLE_RGB_MATRIX_HUE_PENDULUM
+# define ENABLE_RGB_MATRIX_HUE_WAVE
+# define ENABLE_RGB_MATRIX_PIXEL_RAIN
+# define ENABLE_RGB_MATRIX_PIXEL_FLOW
+# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+# define ENABLE_RGB_MATRIX_SPLASH
+# define ENABLE_RGB_MATRIX_MULTISPLASH
+# define ENABLE_RGB_MATRIX_SOLID_SPLASH
+# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#include "config_led.h"