18 files changed, 29 insertions, 247 deletions
diff --git a/keyboards/lucid/alexa/config.h b/keyboards/lucid/alexa/config.h
index 07a73c30fd..82dcbe66ab 100644
--- a/keyboards/lucid/alexa/config.h
+++ b/keyboards/lucid/alexa/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -41,44 +36,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Define Indicator LED's */
-#define LED_CAPS_LOCK_PIN C7
-
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/alexa/info.json b/keyboards/lucid/alexa/info.json
index ffd9cb9c8d..72ebafad5b 100644
--- a/keyboards/lucid/alexa/info.json
+++ b/keyboards/lucid/alexa/info.json
@@ -8,6 +8,12 @@
         "pid": "0x0005",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "C7"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "community_layouts": ["65_ansi_blocker", "65_ansi_blocker_split_bs"],
     "layouts": {
         "LAYOUT_65_ansi_blocker_split_bs": {
             "layout": [
diff --git a/keyboards/lucid/alexa/rules.mk b/keyboards/lucid/alexa/rules.mk
index d53eb045af..f117516ecc 100644
--- a/keyboards/lucid/alexa/rules.mk
+++ b/keyboards/lucid/alexa/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -19,5 +13,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs
diff --git a/keyboards/lucid/alexa_solder/config.h b/keyboards/lucid/alexa_solder/config.h
index 4b04217ef7..8345f486d9 100644
--- a/keyboards/lucid/alexa_solder/config.h
+++ b/keyboards/lucid/alexa_solder/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -41,44 +36,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Define Indicator LED's */
-#define LED_CAPS_LOCK_PIN C7
-
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/alexa_solder/info.json b/keyboards/lucid/alexa_solder/info.json
index 9f1c64363f..849a681179 100644
--- a/keyboards/lucid/alexa_solder/info.json
+++ b/keyboards/lucid/alexa_solder/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0006",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "C7"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/lucid/alexa_solder/rules.mk b/keyboards/lucid/alexa_solder/rules.mk
index 67f00abb1e..f117516ecc 100644
--- a/keyboards/lucid/alexa_solder/rules.mk
+++ b/keyboards/lucid/alexa_solder/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/lucid/kbd8x_hs/config.h b/keyboards/lucid/kbd8x_hs/config.h
index 99a8ff4729..4fdafb75d4 100644
--- a/keyboards/lucid/kbd8x_hs/config.h
+++ b/keyboards/lucid/kbd8x_hs/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 17
 
 /*
  * Keyboard Matrix Assignments
@@ -41,44 +36,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Define Indicator LED's */
-#define LED_CAPS_LOCK_PIN B7
-
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/kbd8x_hs/info.json b/keyboards/lucid/kbd8x_hs/info.json
index 5adeb63b8b..70c22a5dd2 100644
--- a/keyboards/lucid/kbd8x_hs/info.json
+++ b/keyboards/lucid/kbd8x_hs/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0003",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "B7"
+    },
+    "processor": "at90usb646",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_tkl_ansi": {
             "layout": [
diff --git a/keyboards/lucid/kbd8x_hs/rules.mk b/keyboards/lucid/kbd8x_hs/rules.mk
index aed2d80b8b..f117516ecc 100644
--- a/keyboards/lucid/kbd8x_hs/rules.mk
+++ b/keyboards/lucid/kbd8x_hs/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = at90usb646
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/lucid/phantom_hs/config.h b/keyboards/lucid/phantom_hs/config.h
index f5b6189e90..4c035e2275 100644
--- a/keyboards/lucid/phantom_hs/config.h
+++ b/keyboards/lucid/phantom_hs/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -41,44 +36,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Define Indicator LED's */
-#define LED_CAPS_LOCK_PIN C7
-
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/phantom_hs/info.json b/keyboards/lucid/phantom_hs/info.json
index 5ab8f56608..569f05d414 100644
--- a/keyboards/lucid/phantom_hs/info.json
+++ b/keyboards/lucid/phantom_hs/info.json
@@ -8,6 +8,12 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "C7"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
+    "community_layouts": ["65_ansi_blocker"],
     "layouts": {
         "LAYOUT_65_ansi_blocker": {
             "layout": [
diff --git a/keyboards/lucid/phantom_hs/rules.mk b/keyboards/lucid/phantom_hs/rules.mk
index 88051c08ed..f117516ecc 100644
--- a/keyboards/lucid/phantom_hs/rules.mk
+++ b/keyboards/lucid/phantom_hs/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -19,5 +13,3 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = 65_ansi_blocker
diff --git a/keyboards/lucid/phantom_solder/config.h b/keyboards/lucid/phantom_solder/config.h
index 6fdca244b6..1c696f8eb2 100644
--- a/keyboards/lucid/phantom_solder/config.h
+++ b/keyboards/lucid/phantom_solder/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -41,44 +36,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* Define Indicator LED's */
-#define LED_CAPS_LOCK_PIN C7
-
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/phantom_solder/info.json b/keyboards/lucid/phantom_solder/info.json
index 950107367f..15cf74a8eb 100644
--- a/keyboards/lucid/phantom_solder/info.json
+++ b/keyboards/lucid/phantom_solder/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0002",
         "device_version": "0.0.1"
     },
+    "indicators": {
+        "caps_lock": "C7"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/lucid/phantom_solder/rules.mk b/keyboards/lucid/phantom_solder/rules.mk
index 67f00abb1e..f117516ecc 100644
--- a/keyboards/lucid/phantom_solder/rules.mk
+++ b/keyboards/lucid/phantom_solder/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/lucid/scarlet/config.h b/keyboards/lucid/scarlet/config.h
index 118b32d688..4fdafb75d4 100644
--- a/keyboards/lucid/scarlet/config.h
+++ b/keyboards/lucid/scarlet/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 17
 
 /*
  * Keyboard Matrix Assignments
@@ -41,12 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -55,27 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/scarlet/info.json b/keyboards/lucid/scarlet/info.json
index 219a64a2ae..9d4006a8fe 100644
--- a/keyboards/lucid/scarlet/info.json
+++ b/keyboards/lucid/scarlet/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0004",
         "device_version": "0.0.1"
     },
+    "processor": "at90usb646",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_tkl_all": {
             "layout": [
diff --git a/keyboards/lucid/scarlet/rules.mk b/keyboards/lucid/scarlet/rules.mk
index aed2d80b8b..f117516ecc 100644
--- a/keyboards/lucid/scarlet/rules.mk
+++ b/keyboards/lucid/scarlet/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = at90usb646
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #