1 files changed, 46 insertions, 46 deletions

diff --git a/keyboards/lfkeyboards/lfkpad/lfkpad.c b/keyboards/lfkeyboards/lfkpad/lfkpad.c
index 232285c322..b91b7da67d 100644
--- a/keyboards/lfkeyboards/lfkpad/lfkpad.c
+++ b/keyboards/lfkeyboards/lfkpad/lfkpad.c
@@ -1,112 +1,117 @@
-#include <avr/sfr_defs.h>
+#include "lfkpad.h"
+
+#include "quantum.h"
+
 #include <avr/timer_avr.h>
 #include <avr/wdt.h>
-#include "lfkpad.h"
-#include "keymap.h"
 #include "issi.h"
 #include "TWIlib.h"
 #include "lighting.h"
-#include "debug.h"
-#include "quantum.h"
 
 uint16_t click_hz = CLICK_HZ;
 uint16_t click_time = CLICK_MS;
 uint8_t click_toggle = CLICK_ENABLED;
 
-
-void matrix_init_kb(void)
-{
+void matrix_init_kb(void) {
     matrix_init_user();
+
 #ifndef AUDIO_ENABLE
     // If we're not using the audio pin, drive it low
-    sbi(DDRC, 6);
-    cbi(PORTC, 6);
+    setPinOutput(C6);
+    writePinLow(C6);
 #endif
 
 #ifdef ISSI_ENABLE
     issi_init();
 #endif
+
 #ifdef WATCHDOG_ENABLE
     // This is done after turning the layer LED red, if we're caught in a loop
     // we should get a flashing red light
     wdt_enable(WDTO_500MS);
 #endif
-
 }
 
-void matrix_scan_kb(void)
-{
+void matrix_scan_kb(void) {
 #ifdef WATCHDOG_ENABLE
     wdt_reset();
 #endif
+
 #ifdef ISSI_ENABLE
     // switch/underglow lighting update
     static uint32_t issi_device = 0;
     static uint32_t twi_last_ready = 0;
-    if(twi_last_ready > 1000){
-        // Its been way too long since the last ISSI update, reset the I2C bus and start again
+
+    if (twi_last_ready > 1000) {
+        // It's been way too long since the last ISSI update, reset the I2C bus and start again
         dprintf("TWI failed to recover, TWI re-init\n");
         twi_last_ready = 0;
         TWIInit();
         force_issi_refresh();
     }
-    if(isTWIReady()){
+
+    if (isTWIReady()) {
         twi_last_ready = 0;
         // If the i2c bus is available, kick off the issi update, alternate between devices
         update_issi(issi_device, issi_device);
-        if(issi_device){
+
+        if (issi_device) {
             issi_device = 0;
-        }else{
+        } else {
             issi_device = 3;
         }
-    }else{
+    } else {
         twi_last_ready++;
     }
 #endif
+
     matrix_scan_user();
 }
 
-void click(uint16_t freq, uint16_t duration){
+void click(uint16_t freq, uint16_t duration) {
 #ifdef AUDIO_ENABLE
-    if(freq >= 100 && freq <= 20000 && duration < 100){
+    if (freq >= 100 && freq <= 20000 && duration < 100) {
         play_note(freq, 10);
-        for (uint16_t i = 0; i < duration; i++){
+
+        for (uint16_t i = 0; i < duration; i++) {
             _delay_ms(1);
         }
+
         stop_all_notes();
     }
 #endif
 }
 
-bool process_record_kb(uint16_t keycode, keyrecord_t* record)
-{
-    if (click_toggle && record->event.pressed){
+bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
+    if (click_toggle && record->event.pressed) {
         click(click_hz, click_time);
     }
+
     if (keycode == RESET) {
         reset_keyboard_kb();
-    } else {
     }
+
     return process_record_user(keycode, record);
 }
 
-void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
-{
+void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) {
 #ifdef AUDIO_ENABLE
     int8_t sign = 1;
 #endif
-    if(id == LFK_ESC_TILDE){
+
+    if (id == LFK_ESC_TILDE) {
         // Send ~ on shift-esc
         void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
-        uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
-        if(layer_state == 0){
+        uint8_t shifted = get_mods() & MOD_MASK_SHIFT;
+
+        if (layer_state == 0) {
             method(shifted ? KC_GRAVE : KC_ESCAPE);
-        }else{
+        } else {
             method(shifted ? KC_ESCAPE : KC_GRAVE);
         }
         send_keyboard_report();
-    }else if(event->event.pressed){
-        switch(id){
+    } else if (event->event.pressed) {
+        switch (id) {
             case LFK_SET_DEFAULT_LAYER:
                 // set/save the current base layer to eeprom, falls through to LFK_CLEAR
                 eeconfig_update_default_layer(1UL << opt);
@@ -117,24 +122,24 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
                 break;
 #ifdef AUDIO_ENABLE
             case LFK_CLICK_FREQ_LOWER:
-                sign = -1;  // continue to next statement
+                sign = -1; // continue to next statement
             case LFK_CLICK_FREQ_HIGHER:
                 click_hz += sign * 100;
                 click(click_hz, click_time);
                 break;
             case LFK_CLICK_TOGGLE:
-                if(click_toggle){
+                if (click_toggle) {
                     click_toggle = 0;
                     click(4000, 100);
                     click(1000, 100);
-                }else{
+                } else {
                     click_toggle = 1;
                     click(1000, 100);
                     click(4000, 100);
                 }
                 break;
             case LFK_CLICK_TIME_SHORTER:
-                sign = -1;  // continue to next statement
+                sign = -1; // continue to next statement
             case LFK_CLICK_TIME_LONGER:
                 click_time += sign;
                 click(click_hz, click_time);
@@ -144,22 +149,18 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
     }
 }
 
-void reset_keyboard_kb(){
+void reset_keyboard_kb() {
 #ifdef WATCHDOG_ENABLE
     MCUSR = 0;
     wdt_disable();
     wdt_reset();
 #endif
-    reset_keyboard();
-}
 
-void led_set_kb(uint8_t usb_led)
-{
-    led_set_user(usb_led);
+    reset_keyboard();
 }
 
 // LFK lighting info
-const uint8_t rgb_matrices[] = {0, 1};
+const uint8_t rgb_matrices[] = { 0, 1 };
 const uint8_t rgb_sequence[] = {
     32,  1,  2,  3,
     31, 30,  5,  6,
@@ -172,5 +173,4 @@ const uint8_t rgb_sequence[] = {
      4,         25,
     13,         24,
           20
-
 };