diff options
Diffstat (limited to 'keyboards/lfkeyboards/lfk78')
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/config.h | 172 | ||||
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/keymaps/default/config.h | 8 | ||||
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c | 123 | ||||
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk | 42 | ||||
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/lfk78.c | 225 | ||||
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/lfk78.h | 155 | ||||
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/readme.md | 14 | ||||
| -rw-r--r-- | keyboards/lfkeyboards/lfk78/rules.mk | 34 |
9 files changed, 774 insertions, 0 deletions
diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h new file mode 100644 index 0000000000..32f4455dae --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/config.h @@ -0,0 +1,172 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER LFKeyboards +#define PRODUCT LFK78 +#define DESCRIPTION QMK keyboard firmware for LFK78 LFK_REV_STRING + +#ifdef LFK_REV_B +/* RevB Matrix config */ + #define DIODE_DIRECTION COL2ROW + #define MATRIX_ROWS 10 + #define MATRIX_COLS 8 + #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, F0, F1, F4, F5, F6} + #define MATRIX_COL_PINS { E6, F7, D2, D3, D4, D5, D6, D7 } + #define UNUSED_PINS { C7 } + #define RGBLED_NUM 31 // Number of LEDs +#else +/* RevC/D Matrix config */ + #define DIODE_DIRECTION COL2ROW + #define MATRIX_ROWS 5 + #define MATRIX_COLS 18 + #define MATRIX_ROW_PINS {D2, D3, D4, D5, D6 } + #define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, A6, A7, E6, E7,\ + F0, F1, F2, F3, C0, C1, C2, C3 } + #define UNUSED_PINS {B0, B1, B2, B3, B4, B4, B5, B6, B7, C4, C5, C6, C7,\ + D0, D1, D7, E0, E1, E2, E3, E4, D5, F4, F5, F6, F7,\ + E6, E7, F0, F1, F2, F3, C0, C1, C2, C3} + #define RGBLED_NUM 27 // Number of LEDs +#endif + +#define AUDIO_VOICES +#define C6_AUDIO + +#define BACKLIGHT_LEVELS 8 +#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} + +#define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define TAPPING_TERM 200 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/config.h b/keyboards/lfkeyboards/lfk78/keymaps/default/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c b/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c new file mode 100644 index 0000000000..613213f067 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/keymap.c @@ -0,0 +1,123 @@ +#include "lfk78.h" +#include "issi.h" +#include "lighting.h" +#include "action_layer.h" + +//Define a shorter 'transparent' key code to make the keymaps more compact +#define KC_TR KC_TRNS + +enum keymap_layout { + VANILLA = 0, // matches MF68 layout + FUNC, // 0x02 + SETTINGS, // 0x04 +}; + +// Colors of the layer indicator LED +// This list needs to define layer 0xFFFFFFFF, it is the end of the list, and the unknown layer +const Layer_Info layer_info[] = { + // Layer Mask Red Green Blue + {0x00000000, 0xFFFFFFFF, {0x0000, 0x0FFF, 0x0000}}, // base layer - green + {0x00000002, 0xFFFFFFFE, {0x0000, 0x0000, 0x0FFF}}, // function layer - blue + {0x00000004, 0xFFFFFFFC, {0x0FFF, 0x0000, 0x0FFF}}, // settings layer - magenta + {0xFFFFFFFF, 0xFFFFFFFF, {0x0FFF, 0x0FFF, 0x0FFF}}, // unknown layer - REQUIRED - white +}; + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[VANILLA] = KEYMAP( + /* Keymap VANILLA: (Base Layer) Default Layer + * ,---------. ,------------------------------------------------------------. ,---------. + * | F1 | F2 | |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0| - | = |Backspa| | Ins|PgUp| + * |---------| |------------------------------------------------------------| |---------| + * | F3 | F4 | |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | Del|PgDn| + * |---------| |------------------------------------------------------------| `---------' + * | F5 | F6 | |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |---------| |------------------------------------------------------------| ,----. + * | F7 | F8 | |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | | Up | + * |---------| |-------------------------------------------------------------------------. + * | F9 | F10| |Ctrl|Win |Alt | Space |Alt |Ctrl|Func | |Lft| Dn |Rig | + * `---------' `------------------------------------------------------' `-------------' + */ + KC_F1, KC_F2, KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_PGUP, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN, KC_RGHT), + /* Keymap FUNCTION: Function Layer + * ,---------. ,-------------------------------------------------------------. ,---------. + * | | | | ` |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Delete | | Ins|Home| + * |---------| |-------------------------------------------------------------| |---------| + * | | | |Tab |Hom| Up|End|PgU| | | | | | | | | | | Del|End | + * |---------| |-------------------------------------------------------------| `---------' + * | | | |MO(FUNC)|Lft|Dn |Rig|PgD| |Lft|Dwn| Up|Rgt| | | | + * |---------| |-------------------------------------------------------------| ,----. + * | | | |Shift | | | | | | |Mute|V- |V+ | |TG(SETTINGS)| | Up | + * |---------| |--------------------------------------------------------------------------. + * | | | |Ctrl|Win |Alt | Enter |Alt |Func |CTRL | |Lft| Dn |Rig | + * `---------' `------------------------------------------------------' `-------------' + */ +[FUNC] = KEYMAP( + KC_TR, KC_TR, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TR, KC_HOME, + KC_TR, KC_TR, KC_NO,KC_HOME, KC_UP, KC_END, KC_PGUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TR, KC_END, + KC_TR, KC_TR, KC_TR, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO, KC_NO, KC_NO, + KC_TR, KC_TR, KC_TR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, TG(SETTINGS), KC_TR, + KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_ENT, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR), + + /* Keymap SETTINGS: Settings Layer + * ,---------. ,-------------------------------------------------------------. ,-------------. + * | | | |LayClr| | | | | | | | | | |BL-|BL+|BL Togl| |RGB Tog |Val+| + * |---------| |-------------------------------------------------------------| |-------------| + * | | | |MuMode | | | | | | | | | | | | |LEDTst| |RGB Mode|Val-| + * |---------| |-------------------------------------------------------------| `-------------' + * | | | |AudTgl |Hz+|MS+| | | | | | | | | | RST | + * |---------| |-------------------------------------------------------------| ,----. + * | | | |ClickTgl |Hz-|MS-| | | | |MuTgl| | | |Layer Clr | |Hue+| + * |---------| |-------------------------------------------------------------------------. + * | | | | | | | | | | | |Sat-|Hue-|Sat+| + * `---------' `--------------------------------------------------------' `--------------' + */ +[SETTINGS] = KEYMAP( + KC_NO, KC_NO, KC_FN0,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_DEC, BL_INC, BL_TOGG, RGB_TOG, RGB_VAI, + KC_NO, KC_NO, MU_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, RGB_VAD, + KC_NO, KC_NO, AU_TOG, KC_FN1,KC_FN3, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, + KC_NO, KC_NO, KC_FN5, KC_FN2,KC_FN4, KC_NO, KC_NO, KC_NO, KC_NO, MU_TOG, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_SAD, RGB_HUD, RGB_SAI), +}; + +const uint16_t PROGMEM fn_actions[] = { + ACTION_FUNCTION(LFK_CLEAR), // FN0 - reset layers + ACTION_FUNCTION(LFK_CLICK_FREQ_HIGHER), // FN1 - Increase Freq of audio click + ACTION_FUNCTION(LFK_CLICK_FREQ_LOWER), // FN2 - Decrease Freq of audio click + ACTION_FUNCTION(LFK_CLICK_TIME_LONGER), // FN3 - Increase length of audio click + ACTION_FUNCTION(LFK_CLICK_TIME_SHORTER), // FN4 - Decrease length of audio click + ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click + }; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + // This keymap only has a single base layer, so reset the default if needed + if(eeconfig_read_default_layer() > 1){ + eeconfig_update_default_layer(1); + default_layer_set(1); + } +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { +} diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/readme.md b/keyboards/lfkeyboards/lfk78/keymaps/default/readme.md new file mode 100644 index 0000000000..8321adeb7a --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for LFK78 diff --git a/keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk b/keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk new file mode 100644 index 0000000000..dd973eac3d --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/keymaps/default/rules.mk @@ -0,0 +1,42 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk base +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE = no + +ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +ifeq ($(strip $(ISSI_ENABLE)), yes) + TMK_COMMON_DEFS += -DISSI_ENABLE +endif + +ifeq ($(strip $(WATCHDOG_ENABLE)), yes) + TMK_COMMON_DEFS += -DWATCHDOG_ENABLE +endif + +# Override the LFK78 hardware version: +# +# B - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight +# C-H - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB +# J - at90usb646, C6 audio, ISSI device 0 is backlight, 4 is RGB +# LFK_REV = J diff --git a/keyboards/lfkeyboards/lfk78/lfk78.c b/keyboards/lfkeyboards/lfk78/lfk78.c new file mode 100644 index 0000000000..e4393327f3 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/lfk78.c @@ -0,0 +1,225 @@ +#include <avr/sfr_defs.h> +#include <avr/timer_avr.h> +#include <avr/wdt.h> +#include "lfk78.h" +#include "keymap.h" +#include "issi.h" +#include "TWIlib.h" +#include "lighting.h" +#include "debug.h" +#include <audio/audio.h> + +uint16_t click_hz = CLICK_HZ; +uint16_t click_time = CLICK_MS; +uint8_t click_toggle = CLICK_ENABLED; + +void matrix_init_kb(void) +{ + matrix_init_user(); + + // Configure the Layer LED + // Set up 16 bit PWM: Fast PWM, mode 15, inverted + TCCR1A = 0b11111110; + TCCR1B = 0b00011001; + ICR1 = 0xFFFF; + // PWM values - 0xFFFF = off, 0x0000 = max + OCR1C = 0x0000; // B7 - Blue + OCR1B = 0x0000; // B6 - Green + OCR1A = 0x0FFF; // B5 - Red + // Set as output + DDRB |= 0b11100000; + +#ifndef AUDIO_ENABLE + // If we're not using the audio pin, drive it low + sbi(DDRC, 6); + cbi(PORTC, 6); +#endif + +#ifdef ISSI_ENABLE + issi_init(); +#endif +#ifdef WATCHDOG_ENABLE + // This is done after turning the layer LED red, if we're caught in a loop + // we should get a flashing red light + wdt_enable(WDTO_500MS); +#endif + +} + +void matrix_scan_kb(void) +{ +#ifdef WATCHDOG_ENABLE + wdt_reset(); +#endif +#ifdef ISSI_ENABLE + // switch/underglow lighting update + static uint32_t issi_device = 0; + static uint32_t twi_last_ready = 0; + if(twi_last_ready > 1000){ + // Its been way too long since the last ISSI update, reset the I2C bus and start again + dprintf("TWI failed to recover, TWI re-init\n"); + twi_last_ready = 0; + TWIInit(); + force_issi_refresh(); + } + if(isTWIReady()){ + twi_last_ready = 0; + // If the i2c bus is available, kick off the issi update, alternate between devices + update_issi(issi_device, issi_device); + if(issi_device){ + issi_device = 0; + }else{ + issi_device = 3; + } + }else{ + twi_last_ready++; + } +#endif + // Update layer indicator LED + // + // Not sure how else to reliably do this... TMK has the 'hook_layer_change' + // but can't find QMK equiv + static uint32_t layer_indicator = -1; + if(layer_indicator != layer_state){ + for(uint32_t i=0;; i++){ + // the layer_info list should end with layer 0xFFFFFFFF + // it will break this out of the loop and define the unknown layer color + if((layer_info[i].layer == (layer_state & layer_info[i].mask)) || (layer_info[i].layer == 0xFFFFFFFF)){ + OCR1A = layer_info[i].color.red; + OCR1B = layer_info[i].color.green; + OCR1C = layer_info[i].color.blue; + layer_indicator = layer_state; + break; + } + } + } + matrix_scan_user(); +} + +void click(uint16_t freq, uint16_t duration){ +#ifdef AUDIO_ENABLE + if(freq >= 100 && freq <= 20000 && duration < 100){ + play_note(freq, 10); + for (uint16_t i = 0; i < duration; i++){ + _delay_ms(1); + } + stop_all_notes(); + } +#endif +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) +{ + if (click_toggle && record->event.pressed){ + click(click_hz, click_time); + } + if (keycode == RESET) { + reset_keyboard_kb(); + } else { + } + return process_record_user(keycode, record); +} + +void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) +{ +#ifdef AUDIO_ENABLE + int8_t sign = 1; +#endif + if(id == LFK_ESC_TILDE){ + // Send ~ on shift-esc + void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key; + uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); + if(layer_state == 0){ + method(shifted ? KC_GRAVE : KC_ESCAPE); + }else{ + method(shifted ? KC_ESCAPE : KC_GRAVE); + } + send_keyboard_report(); + }else if(event->event.pressed){ + switch(id){ + case LFK_SET_DEFAULT_LAYER: + // set/save the current base layer to eeprom, falls through to LFK_CLEAR + eeconfig_update_default_layer(1UL << opt); + default_layer_set(1UL << opt); + case LFK_CLEAR: + // Go back to default layer + layer_clear(); + break; +#ifdef ISSI_ENABLE + case LFK_LED_TEST: + led_test(); + break; +#endif +#ifdef AUDIO_ENABLE + case LFK_CLICK_FREQ_LOWER: + sign = -1; // continue to next statement + case LFK_CLICK_FREQ_HIGHER: + click_hz += sign * 100; + click(click_hz, click_time); + break; + case LFK_CLICK_TOGGLE: + if(click_toggle){ + click_toggle = 0; + click(4000, 100); + click(1000, 100); + }else{ + click_toggle = 1; + click(1000, 100); + click(4000, 100); + } + break; + case LFK_CLICK_TIME_SHORTER: + sign = -1; // continue to next statement + case LFK_CLICK_TIME_LONGER: + click_time += sign; + click(click_hz, click_time); + break; +#endif + case LFK_DEBUG_SETTINGS: + dprintf("Click:\n"); + dprintf(" toggle: %d\n", click_toggle); + dprintf(" freq(hz): %d\n", click_hz); + dprintf(" duration(ms): %d\n", click_time); + break; + } + } +} + +void reset_keyboard_kb(){ +#ifdef WATCHDOG_ENABLE + MCUSR = 0; + wdt_disable(); + wdt_reset(); +#endif + OCR1A = 0x0000; // B5 - Red + OCR1B = 0x0FFF; // B6 - Green + OCR1C = 0x0FFF; // B7 - Blue + reset_keyboard(); +} + +void led_set_kb(uint8_t usb_led) +{ + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +// LFK lighting info +const uint8_t switch_matrices[] = {0, 1}; +const uint8_t rgb_matrices[] = {6, 7}; +const uint8_t rgb_sequence[] = { + 12, 11, 10, 9, 16, 32, 31, 30, 28, 25, 24, 22, 21, + 20, 19, 18, 17, 1, 2, 3, 4, 5, 6, 7, 8, 14, 13 +}; +// Maps switch LEDs from Row/Col to ISSI matrix. +// Value breakdown: +// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +// / \ ISSI Col | ISSI Row | +// matrix idx +const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = +KEYMAP( + 0x19, 0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91, + 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, 0xA4, 0xA3, 0xA2, 0xA1, + 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, 0xB3, + 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, 0xC5, 0xC4, 0xC2, + 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2, 0xE1); diff --git a/keyboards/lfkeyboards/lfk78/lfk78.h b/keyboards/lfkeyboards/lfk78/lfk78.h new file mode 100644 index 0000000000..47ad745318 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/lfk78.h @@ -0,0 +1,155 @@ +#ifndef LFK78_H +#define LFK78_H + +/* if the kb.h file exists (because we're running from qmkbuilder) include it */ +#if __has_include("kb.h") +#include "kb.h" +#endif + +#include "quantum.h" +#include "matrix.h" +#include <avr/sfr_defs.h> + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif + +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + + +typedef struct RGB_Color { + uint16_t red; + uint16_t green; + uint16_t blue; +} RGB_Color; + +typedef struct Layer_Info { + uint32_t layer; + uint32_t mask; + RGB_Color color; +} Layer_Info; + +extern const uint32_t layer_count; +extern const Layer_Info layer_info[]; + +enum action_functions { + LFK_CLEAR = 0, // Resets all layers + LFK_ESC_TILDE, // esc+lshift = ~ + LFK_SET_DEFAULT_LAYER, // changes and saves current base layer to eeprom + LFK_CLICK_TOGGLE, // Adjusts click duration + LFK_CLICK_FREQ_HIGHER, // Adjusts click frequency + LFK_CLICK_FREQ_LOWER, // Adjusts click frequency + LFK_CLICK_TIME_LONGER, // Adjusts click duration + LFK_CLICK_TIME_SHORTER, // Adjusts click duration + LFK_DEBUG_SETTINGS, // prints LED and click settings to HID + LFK_LED_TEST // cycles through switch and RGB LEDs +}; + +#define CLICK_HZ 500 +#define CLICK_MS 2 +#define CLICK_ENABLED 0 + +void reset_keyboard_kb(void); +void click(uint16_t freq, uint16_t duration); + +#ifdef LFK_REV_B + /* RevB Keymap */ + // This a shortcut to help you visually see your layout. + /* + * ,---------. ,-----------------------------------------------------------------------. ,---------. + * | 0 | 1 | | 2 | 3 | 4 | 5 | 6 | 7 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | | 94 | 95 | + * |---------| |-----------------------------------------------------------------------| |---------| + * | 10 | 11 | | 12 | 13 | 14 | 15 | 16 | 17 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | | 96 | 97 | + * |---------| |-----------------------------------------------------------------------| `---------' + * | 20 | 21 | | 22 | 23 | 24 | 25 | 26 | 27 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | + * |---------| |-----------------------------------------------------------------------| ,----. + * | 30 | 31 | | 32 | 33 | 34 | 35 | 36 | 37 | 80 | 81 | 82 | 83 | 84 | 85 | | 86 | + * |---------| |-------------------------------------------------------------------------------------. + * | 40 | 41 | | 42 | 43 | 44 | 45 | 46 | 47 | 90 | | 91 | 92 | 93 | + * `---------' `--------------------------------------------------------------------' `--------------' + */ + // The first section contains all of the arguements + // The second converts the arguments into a two-dimensional array + #define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, k94, k95, \ + k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k66, k67, k96, k97, \ + k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, k76, \ + k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ + k40, k41, k42, k43, k44, k45, k46, k47, k90, k91, k92, k93 \ + ) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, }, \ + { k60, k61, k62, k63, k64, k65, k66, k67, }, \ + { k70, k71, k72, k73, k74, k75, k76, KC_NO,}, \ + { k80, k81, k82, k83, k84, k85, k86, KC_NO,}, \ + { k90, k91, k92, k93, k94, k95, k96, k97, }, \ + } +#else + /* RevC/D Keymap */ + // This a shortcut to help you visually see your layout. + /* + * ,---------. ,-----------------------------------------------------------------------. ,---------. + * | 11 | 12 | | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1E | 1F | 1G | | 1H | 1I | + * |---------| |-----------------------------------------------------------------------| |---------| + * | 21 | 22 | | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D | 2E | 2F | 2G | | 2H | 2I | + * |---------| |-----------------------------------------------------------------------| `---------' + * | 31 | 32 | | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C | 3D | 3E | 3F | + * |---------| |-----------------------------------------------------------------------| ,----. + * | 41 | 42 | | 43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C | 4D | 4E | 4F | | 4H | + * |---------| |-------------------------------------------------------------------------------------. + * | 51 | 52 | | 53 | 54 | 55 | 59 | 5D | 5E | 5F | | 5G | 5H | 5I | + * `---------' `--------------------------------------------------------------------' `--------------' + */ + // The first section contains all of the arguements + // The second converts the arguments into a two-dimensional array + #define KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \ + k41, k42, k43, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4H, \ + k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \ + ) { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \ + {k41, k42, k43, KC_NO, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, KC_NO, k4H, KC_NO}, \ + {k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \ + } + + #define SPLIT_SHIFT_KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \ + k41, k42, k43, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, \ + k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \ + ) { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \ + {k41, k42, k43, KC_NO, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G, k4H, KC_NO}, \ + {k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \ + } + + #define ISO_KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4H, \ + k51, k52, k53, k54, k55, k59, k5D, k5E, k5F, k5G, k5H, k5I \ + ) { \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I}, \ + {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, k2H, k2I}, \ + {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, KC_NO, KC_NO, KC_NO}, \ + {k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, KC_NO, k4H, KC_NO}, \ + {k51, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, k59, KC_NO, KC_NO, KC_NO, k5D, k5E, k5F, k5G, k5H, k5I} \ + } + +#endif //LFK_REV_B + +#endif //LFK78_H diff --git a/keyboards/lfkeyboards/lfk78/readme.md b/keyboards/lfkeyboards/lfk78/readme.md new file mode 100644 index 0000000000..e05390f9c3 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/readme.md @@ -0,0 +1,14 @@ +LFK78/68 +=== + +A 65% keyboard similar to the MagicForce68 or VA68M. Optional fuction key block on left side. + +Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards) +Hardware Supported: LFK78/68 RevB - RevJ, SMK78/68 +Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/) + +Make example for this keyboard (after setting up your build environment): + + make lfkeyboards/lfk78:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk new file mode 100644 index 0000000000..091cd77556 --- /dev/null +++ b/keyboards/lfkeyboards/lfk78/rules.mk @@ -0,0 +1,34 @@ +# Set the LFK78 hardware version. +# +# B - first public release, uses atmega32u4, has audio, ISSI matrix split between RGB and backlight +# C-H - at90usb1286, no audio, ISSI device 0 is backlight, 4 is RGB +# J - at90usb646, C6 audio, ISSI device 0 is backlight, 4 is RGB +LFK_REV = J + +ifeq ($(LFK_REV), B) + MCU = atmega32u4 + OPT_DEFS += -DBOOTLOADER_SIZE=4096 +else ifeq ($(LFK_REV), J) + MCU = at90usb646 + OPT_DEFS += -DBOOTLOADER_SIZE=4096 +else + MCU = at90usb1286 + OPT_DEFS += -DBOOTLOADER_SIZE=8192 +endif +OPT_DEFS += -DLFK_REV_$(LFK_REV) +OPT_DEFS += -DLFK_REV_STRING=\"Rev$(LFK_REV)\" + +# Extra source files for IS3731 lighting +SRC = TWIlib.c issi.c lighting.c + +# Processor frequency. +F_CPU = 16000000 + +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT |