10 files changed, 12 insertions, 58 deletions
diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h
index b018902b88..4b047f6c1c 100644
--- a/keyboards/lfkeyboards/lfk78/config.h
+++ b/keyboards/lfkeyboards/lfk78/config.h
@@ -17,16 +17,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
 #define BACKLIGHT_LEVELS 8
 #define BACKLIGHT_PWM_MAP { 8, 16, 40, 55, 70, 128, 200, 255 }
 
@@ -53,43 +47,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -105,7 +67,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c b/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c
index 61ca4bb398..f4d1e010ee 100644
--- a/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c
+++ b/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c
@@ -105,7 +105,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     )
 };
 
-void tap_space_spam_finished(qk_tap_dance_state_t *state, void *user_data) {
+void tap_space_spam_finished(tap_dance_state_t *state, void *user_data) {
     if (get_mods() & (MOD_BIT(KC_LGUI))) {
       return;
     }
@@ -115,12 +115,12 @@ void tap_space_spam_finished(qk_tap_dance_state_t *state, void *user_data) {
     tap_code(KC_SPC);
 }
 
-void tap_space_spam_reset(qk_tap_dance_state_t *state, void *user_data) {
+void tap_space_spam_reset(tap_dance_state_t *state, void *user_data) {
     spam_space = false;
     unregister_code(KC_SPC);
 }
 
-void tap_esc_func_finished(qk_tap_dance_state_t *state, void *user_data) {
+void tap_esc_func_finished(tap_dance_state_t *state, void *user_data) {
     if (state->pressed) {
         layer_on(FUNC);
     } else {
@@ -128,11 +128,11 @@ void tap_esc_func_finished(qk_tap_dance_state_t *state, void *user_data) {
     }
 }
 
-void tap_esc_func_reset(qk_tap_dance_state_t *state, void *user_data) {
+void tap_esc_func_reset(tap_dance_state_t *state, void *user_data) {
     layer_off(FUNC);
 }
 
-qk_tap_dance_action_t tap_dance_actions[] = {
+tap_dance_action_t tap_dance_actions[] = {
     [TD_ESC_FUNC] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, tap_esc_func_finished, tap_esc_func_reset),
     [TD_SPC_SPAM] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, tap_space_spam_finished, tap_space_spam_reset),
 };
diff --git a/keyboards/lfkeyboards/lfk78/lfk78.c b/keyboards/lfkeyboards/lfk78/lfk78.c
index 110bbd4168..6f4c062ad8 100644
--- a/keyboards/lfkeyboards/lfk78/lfk78.c
+++ b/keyboards/lfkeyboards/lfk78/lfk78.c
@@ -137,7 +137,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
     return process_record_user(keycode, record);
 }
 
-void reset_keyboard_kb() {
+void reset_keyboard_kb(void) {
 #ifdef WATCHDOG_ENABLE
     MCUSR = 0;
     wdt_disable();
diff --git a/keyboards/lfkeyboards/lfk78/revb/info.json b/keyboards/lfkeyboards/lfk78/revb/info.json
index bd9edaea01..8ff16c7e54 100644
--- a/keyboards/lfkeyboards/lfk78/revb/info.json
+++ b/keyboards/lfkeyboards/lfk78/revb/info.json
@@ -8,6 +8,8 @@
         "pid": "0x3738",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/lfkeyboards/lfk78/revb/rules.mk b/keyboards/lfkeyboards/lfk78/revb/rules.mk
index 451373a927..e69de29bb2 100644
--- a/keyboards/lfkeyboards/lfk78/revb/rules.mk
+++ b/keyboards/lfkeyboards/lfk78/revb/rules.mk
@@ -1,2 +0,0 @@
-# MCU name
-MCU = atmega32u4
diff --git a/keyboards/lfkeyboards/lfk78/revc/info.json b/keyboards/lfkeyboards/lfk78/revc/info.json
index 1af3ffaf86..48233f60cd 100644
--- a/keyboards/lfkeyboards/lfk78/revc/info.json
+++ b/keyboards/lfkeyboards/lfk78/revc/info.json
@@ -8,6 +8,8 @@
         "pid": "0x3738",
         "device_version": "0.0.1"
     },
+    "processor": "at90usb1286",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/lfkeyboards/lfk78/revc/rules.mk b/keyboards/lfkeyboards/lfk78/revc/rules.mk
index 889bfaad54..e69de29bb2 100644
--- a/keyboards/lfkeyboards/lfk78/revc/rules.mk
+++ b/keyboards/lfkeyboards/lfk78/revc/rules.mk
@@ -1,2 +0,0 @@
-# MCU name
-MCU = at90usb1286
diff --git a/keyboards/lfkeyboards/lfk78/revj/info.json b/keyboards/lfkeyboards/lfk78/revj/info.json
index d905b4977e..0d1c355184 100644
--- a/keyboards/lfkeyboards/lfk78/revj/info.json
+++ b/keyboards/lfkeyboards/lfk78/revj/info.json
@@ -8,6 +8,8 @@
         "pid": "0x3738",
         "device_version": "0.0.1"
     },
+    "processor": "at90usb646",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/lfkeyboards/lfk78/revj/rules.mk b/keyboards/lfkeyboards/lfk78/revj/rules.mk
index c1836b7496..ef72559a0c 100644
--- a/keyboards/lfkeyboards/lfk78/revj/rules.mk
+++ b/keyboards/lfkeyboards/lfk78/revj/rules.mk
@@ -1,4 +1 @@
-# MCU name
-MCU = at90usb646
-
 AUDIO_ENABLE = yes
diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk
index 89d8c7ff59..1db50d1423 100644
--- a/keyboards/lfkeyboards/lfk78/rules.mk
+++ b/keyboards/lfkeyboards/lfk78/rules.mk
@@ -1,6 +1,3 @@
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #