3 files changed, 3 insertions, 42 deletions
diff --git a/keyboards/kmac/config.h b/keyboards/kmac/config.h
index 3d1b8eb5d5..5db54daf43 100644
--- a/keyboards/kmac/config.h
+++ b/keyboards/kmac/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -40,44 +39,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_SCROLL_LOCK_PIN E6
 #define LED_PIN_ON_STATE 0
 
-/* number of backlight levels */
-//#define BACKLIGHT_LEVELS 3
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/kmac/info.json b/keyboards/kmac/info.json
index 27e6c03524..b8e5497e28 100644
--- a/keyboards/kmac/info.json
+++ b/keyboards/kmac/info.json
@@ -7,6 +7,9 @@
     "pid": "0x4143",
     "device_version": "1.0.4"
   },
+  "processor": "atmega32u4",
+  "bootloader": "atmel-dfu",
+  "community_layouts": ["tkl_ansi"],
   "layouts": {
     "LAYOUT_tkl_ansi": {
       "layout": [
diff --git a/keyboards/kmac/rules.mk b/keyboards/kmac/rules.mk
index 2eb2e6d5e2..b1bd80232c 100644
--- a/keyboards/kmac/rules.mk
+++ b/keyboards/kmac/rules.mk
@@ -1,12 +1,6 @@
-# MCU name
-MCU = atmega32u4
-
 # Processor frequency
 F_CPU = 8000000
 
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
@@ -23,6 +17,3 @@ AUDIO_ENABLE = no           # Audio output
 
 # Project specific files
 SRC += matrix.c
-
-# Supported layouts
-LAYOUTS = tkl_ansi