summaryrefslogtreecommitdiff
path: root/keyboards/keyprez/bison
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/keyprez/bison')
-rw-r--r--keyboards/keyprez/bison/config.h72
-rw-r--r--keyboards/keyprez/bison/info.json5
-rw-r--r--keyboards/keyprez/bison/rules.mk6
3 files changed, 5 insertions, 78 deletions
diff --git a/keyboards/keyprez/bison/config.h b/keyboards/keyprez/bison/config.h
index e6f73948f5..28e823f11f 100644
--- a/keyboards/keyprez/bison/config.h
+++ b/keyboards/keyprez/bison/config.h
@@ -17,11 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
/*
* Keyboard Matrix Assignments
@@ -39,80 +34,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//# define RGBLED_NUM 16
-//# define RGBLIGHT_HUE_STEP 8
-//# define RGBLIGHT_SAT_STEP 8
-//# define RGBLIGHT_VAL_STEP 8
-//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-//#endif
-
#define ENCODERS_PAD_A { B6 }
#define ENCODERS_PAD_B { B5 }
#define ENCODERS_PAD_A_RIGHT { B5 }
#define ENCODERS_PAD_B_RIGHT { B6 }
#define ENCODER_RESOLUTION 4
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -128,7 +60,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/keyprez/bison/info.json b/keyboards/keyprez/bison/info.json
index 36aeb27a10..5c33dc5fa6 100644
--- a/keyboards/keyprez/bison/info.json
+++ b/keyboards/keyprez/bison/info.json
@@ -8,6 +8,11 @@
"pid": "0x0000",
"device_version": "0.0.1"
},
+ "split": {
+ "soft_serial_pin": "D0"
+ },
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT": {
"layout": [
diff --git a/keyboards/keyprez/bison/rules.mk b/keyboards/keyprez/bison/rules.mk
index 710c90186d..21a7746f6c 100644
--- a/keyboards/keyprez/bison/rules.mk
+++ b/keyboards/keyprez/bison/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#