3 files changed, 3 insertions, 56 deletions
diff --git a/keyboards/keyhive/maypad/config.h b/keyboards/keyhive/maypad/config.h
index ef8db88700..72fa093e9c 100644
--- a/keyboards/keyhive/maypad/config.h
+++ b/keyboards/keyhive/maypad/config.h
@@ -14,7 +14,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -36,15 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
@@ -61,45 +51,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 // #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -115,7 +71,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/keyhive/maypad/info.json b/keyboards/keyhive/maypad/info.json
index 3001bae5b5..be72cb07f9 100644
--- a/keyboards/keyhive/maypad/info.json
+++ b/keyboards/keyhive/maypad/info.json
@@ -8,6 +8,9 @@
         "pid": "0x4D50",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
+    "community_layouts": ["ortho_5x4", "numpad_5x4"],
     "layouts": {
         "LAYOUT_numpad_5x4": {
             "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}]
diff --git a/keyboards/keyhive/maypad/rules.mk b/keyboards/keyhive/maypad/rules.mk
index dac8a75963..309e55c9f4 100644
--- a/keyboards/keyhive/maypad/rules.mk
+++ b/keyboards/keyhive/maypad/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
@@ -16,5 +10,3 @@ NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
-
-LAYOUTS = ortho_5x4 numpad_5x4