diff options
Diffstat (limited to 'keyboards/keychron')
115 files changed, 108 insertions, 344 deletions
diff --git a/keyboards/keychron/c1_pro/ansi/rgb/config.h b/keyboards/keychron/c1_pro/ansi/rgb/config.h index a103d190d0..c6b63b4d7c 100644 --- a/keyboards/keychron/c1_pro/ansi/rgb/config.h +++ b/keyboards/keychron/c1_pro/ansi/rgb/config.h @@ -20,17 +20,16 @@ // #define MATRIX_UNSELECT_DRIVE_HIGH /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 49 #define DRIVER_2_LED_TOTAL 39 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL /* Set led driver current */ #define CKLED2001_CURRENT_TUNE \ { 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44 } diff --git a/keyboards/keychron/c1_pro/ansi/white/config.h b/keyboards/keychron/c1_pro/ansi/white/config.h index dd3e1da477..5492eca28f 100644 --- a/keyboards/keychron/c1_pro/ansi/white/config.h +++ b/keyboards/keychron/c1_pro/ansi/white/config.h @@ -20,14 +20,13 @@ // #define MATRIX_UNSELECT_DRIVE_HIGH /* LED Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND /* LED Matrix Configuration */ #define LED_MATRIX_LED_COUNT 90 -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL /* Set led driver current */ #define CKLED2001_CURRENT_TUNE \ { 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44 } diff --git a/keyboards/keychron/c2_pro/ansi/rgb/config.h b/keyboards/keychron/c2_pro/ansi/rgb/config.h index d62b756f5a..d2d3d61f29 100644 --- a/keyboards/keychron/c2_pro/ansi/rgb/config.h +++ b/keyboards/keychron/c2_pro/ansi/rgb/config.h @@ -17,9 +17,9 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Set LED driver current */ #define CKLED2001_CURRENT_TUNE \ diff --git a/keyboards/keychron/c2_pro/ansi/white/config.h b/keyboards/keychron/c2_pro/ansi/white/config.h index d2a0e27b57..fb2ca3aa41 100644 --- a/keyboards/keychron/c2_pro/ansi/white/config.h +++ b/keyboards/keychron/c2_pro/ansi/white/config.h @@ -17,8 +17,8 @@ #pragma once /* LED Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND /* Set LED driver current */ #define CKLED2001_CURRENT_TUNE \ diff --git a/keyboards/keychron/q0/rev_0130/config.h b/keyboards/keychron/q0/rev_0130/config.h index 12ecfe1356..c6a241a1ce 100644 --- a/keyboards/keychron/q0/rev_0130/config.h +++ b/keyboards/keychron/q0/rev_0130/config.h @@ -17,8 +17,8 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 21 diff --git a/keyboards/keychron/q0/rev_0130/rules.mk b/keyboards/keychron/q0/rev_0130/rules.mk index f6868e88e3..6e7633bfe0 100644 --- a/keyboards/keychron/q0/rev_0130/rules.mk +++ b/keyboards/keychron/q0/rev_0130/rules.mk @@ -1,3 +1 @@ -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - +# This file intentionally left blank diff --git a/keyboards/keychron/q0/rev_0131/config.h b/keyboards/keychron/q0/rev_0131/config.h index e4c5c2d3fc..f1d06a2842 100644 --- a/keyboards/keychron/q0/rev_0131/config.h +++ b/keyboards/keychron/q0/rev_0131/config.h @@ -17,15 +17,14 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110111 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 26 #define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL /* Enable num-lock LED */ #define NUM_LOCK_LED_INDEX 5 diff --git a/keyboards/keychron/q0/rev_0131/rules.mk b/keyboards/keychron/q0/rev_0131/rules.mk index f6868e88e3..6e7633bfe0 100644 --- a/keyboards/keychron/q0/rev_0131/rules.mk +++ b/keyboards/keychron/q0/rev_0131/rules.mk @@ -1,3 +1 @@ -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - +# This file intentionally left blank diff --git a/keyboards/keychron/q1/config.h b/keyboards/keychron/q1/config.h index c78453dc5f..543f62f9d8 100644 --- a/keyboards/keychron/q1/config.h +++ b/keyboards/keychron/q1/config.h @@ -17,9 +17,9 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1010000 -#define DRIVER_ADDR_2 0b1011111 +#define IS31FL3733_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 IS31FL3733_I2C_ADDRESS_GND_GND +#define DRIVER_ADDR_2 IS31FL3733_I2C_ADDRESS_VCC_VCC /* DIP switch */ #define DIP_SWITCH_MATRIX_GRID { {0,1} } diff --git a/keyboards/keychron/q1/iso_encoder/config.h b/keyboards/keychron/q1/iso_encoder/config.h index c1e84e44d3..33916cf8c4 100644 --- a/keyboards/keychron/q1/iso_encoder/config.h +++ b/keyboards/keychron/q1/iso_encoder/config.h @@ -16,14 +16,6 @@ #pragma once -/* DIP switch */ -#define DIP_SWITCH_MATRIX_GRID { {0,1} } - -/* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1010000 -#define DRIVER_ADDR_2 0b1011111 - /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 59 #define DRIVER_2_LED_TOTAL 24 diff --git a/keyboards/keychron/q10/ansi_encoder/rules.mk b/keyboards/keychron/q10/ansi_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/q10/ansi_encoder/rules.mk +++ b/keyboards/keychron/q10/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q10/config.h b/keyboards/keychron/q10/config.h index 0ef4edf245..3a0d613510 100644 --- a/keyboards/keychron/q10/config.h +++ b/keyboards/keychron/q10/config.h @@ -30,9 +30,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -41,8 +41,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE \ { 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A } diff --git a/keyboards/keychron/q10/iso_encoder/rules.mk b/keyboards/keychron/q10/iso_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/q10/iso_encoder/rules.mk +++ b/keyboards/keychron/q10/iso_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q11/ansi_encoder/rules.mk b/keyboards/keychron/q11/ansi_encoder/rules.mk index 60d5c6bea2..c6e2988321 100644 --- a/keyboards/keychron/q11/ansi_encoder/rules.mk +++ b/keyboards/keychron/q11/ansi_encoder/rules.mk @@ -1,6 +1 @@ -# Build Options -# change yes to no to disable -# -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash SERIAL_DRIVER = usart diff --git a/keyboards/keychron/q11/config.h b/keyboards/keychron/q11/config.h index d2c7ad4a96..90bd7e0a56 100755 --- a/keyboards/keychron/q11/config.h +++ b/keyboards/keychron/q11/config.h @@ -27,8 +27,8 @@ #define MATRIX_MASKED // actual mask is defined by `matrix_mask` in `q11.c` /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U diff --git a/keyboards/keychron/q12/ansi_encoder/rules.mk b/keyboards/keychron/q12/ansi_encoder/rules.mk index 80a3f300bd..213c733c9c 100644 --- a/keyboards/keychron/q12/ansi_encoder/rules.mk +++ b/keyboards/keychron/q12/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q12/config.h b/keyboards/keychron/q12/config.h index 95281b4854..52c4ade5a6 100644 --- a/keyboards/keychron/q12/config.h +++ b/keyboards/keychron/q12/config.h @@ -26,9 +26,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U diff --git a/keyboards/keychron/q12/iso_encoder/rules.mk b/keyboards/keychron/q12/iso_encoder/rules.mk index 9867724957..39b0594039 100644 --- a/keyboards/keychron/q12/iso_encoder/rules.mk +++ b/keyboards/keychron/q12/iso_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q2/ansi/rules.mk b/keyboards/keychron/q2/ansi/rules.mk index ede7d6fab2..eca21676ee 100644 --- a/keyboards/keychron/q2/ansi/rules.mk +++ b/keyboards/keychron/q2/ansi/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q2/ansi_encoder/rules.mk b/keyboards/keychron/q2/ansi_encoder/rules.mk index b294cf950e..dfa13564d2 100644 --- a/keyboards/keychron/q2/ansi_encoder/rules.mk +++ b/keyboards/keychron/q2/ansi_encoder/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q2/config.h b/keyboards/keychron/q2/config.h index 63e31cd01d..1ecff68e4d 100644 --- a/keyboards/keychron/q2/config.h +++ b/keyboards/keychron/q2/config.h @@ -22,12 +22,11 @@ #define DIP_SWITCH_MATRIX_GRID { {4, 4} } /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL /* Disable DIP switch in matrix data */ #define MATRIX_MASKED diff --git a/keyboards/keychron/q2/iso/rules.mk b/keyboards/keychron/q2/iso/rules.mk index b3de962291..2cdda3f9a7 100644 --- a/keyboards/keychron/q2/iso/rules.mk +++ b/keyboards/keychron/q2/iso/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q2/iso_encoder/rules.mk b/keyboards/keychron/q2/iso_encoder/rules.mk index aba76c0944..f7e6a950e8 100644 --- a/keyboards/keychron/q2/iso_encoder/rules.mk +++ b/keyboards/keychron/q2/iso_encoder/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q2/jis/rules.mk b/keyboards/keychron/q2/jis/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/q2/jis/rules.mk +++ b/keyboards/keychron/q2/jis/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q2/jis_encoder/rules.mk b/keyboards/keychron/q2/jis_encoder/rules.mk index 5091fe9414..5d77f09971 100644 --- a/keyboards/keychron/q2/jis_encoder/rules.mk +++ b/keyboards/keychron/q2/jis_encoder/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q3/ansi/rules.mk b/keyboards/keychron/q3/ansi/rules.mk index 58bbb89a72..cf4b02e6da 100644 --- a/keyboards/keychron/q3/ansi/rules.mk +++ b/keyboards/keychron/q3/ansi/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q3/ansi_encoder/rules.mk b/keyboards/keychron/q3/ansi_encoder/rules.mk index 77b90f2466..929c4532a0 100644 --- a/keyboards/keychron/q3/ansi_encoder/rules.mk +++ b/keyboards/keychron/q3/ansi_encoder/rules.mk @@ -14,8 +14,6 @@ ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q3/config.h b/keyboards/keychron/q3/config.h index 79f07d0390..5914df0200 100644 --- a/keyboards/keychron/q3/config.h +++ b/keyboards/keychron/q3/config.h @@ -24,9 +24,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -35,8 +35,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL /* DIP switch */ #define DIP_SWITCH_MATRIX_GRID { {5, 4} } diff --git a/keyboards/keychron/q3/iso/rules.mk b/keyboards/keychron/q3/iso/rules.mk index 58bbb89a72..cf4b02e6da 100644 --- a/keyboards/keychron/q3/iso/rules.mk +++ b/keyboards/keychron/q3/iso/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q3/iso_encoder/rules.mk b/keyboards/keychron/q3/iso_encoder/rules.mk index 77b90f2466..929c4532a0 100644 --- a/keyboards/keychron/q3/iso_encoder/rules.mk +++ b/keyboards/keychron/q3/iso_encoder/rules.mk @@ -14,8 +14,6 @@ ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q3/jis/rules.mk b/keyboards/keychron/q3/jis/rules.mk index 58bbb89a72..cf4b02e6da 100644 --- a/keyboards/keychron/q3/jis/rules.mk +++ b/keyboards/keychron/q3/jis/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q3/jis_encoder/rules.mk b/keyboards/keychron/q3/jis_encoder/rules.mk index 77b90f2466..929c4532a0 100644 --- a/keyboards/keychron/q3/jis_encoder/rules.mk +++ b/keyboards/keychron/q3/jis_encoder/rules.mk @@ -14,8 +14,6 @@ ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q4/ansi_v1/config.h b/keyboards/keychron/q4/ansi_v1/config.h index e11ab12b93..cf12c75966 100644 --- a/keyboards/keychron/q4/ansi_v1/config.h +++ b/keyboards/keychron/q4/ansi_v1/config.h @@ -17,17 +17,16 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 31 #define DRIVER_2_LED_TOTAL 30 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE \ { 0xCA, 0xCA, 0x60, 0xCA, 0xCA, 0x60, 0xCA, 0xCA, 0x60, 0xCA, 0xCA, 0x60 } diff --git a/keyboards/keychron/q4/ansi_v1/rules.mk b/keyboards/keychron/q4/ansi_v1/rules.mk index cad488b009..04fb3f58a3 100644 --- a/keyboards/keychron/q4/ansi_v1/rules.mk +++ b/keyboards/keychron/q4/ansi_v1/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = no -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q4/ansi_v2/config.h b/keyboards/keychron/q4/ansi_v2/config.h index cc906fed03..1bcaf204ef 100644 --- a/keyboards/keychron/q4/ansi_v2/config.h +++ b/keyboards/keychron/q4/ansi_v2/config.h @@ -17,8 +17,8 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 61 diff --git a/keyboards/keychron/q4/ansi_v2/rules.mk b/keyboards/keychron/q4/ansi_v2/rules.mk index cad488b009..04fb3f58a3 100644 --- a/keyboards/keychron/q4/ansi_v2/rules.mk +++ b/keyboards/keychron/q4/ansi_v2/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = no -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q4/iso/config.h b/keyboards/keychron/q4/iso/config.h index 9e4a1fc3e5..b61f8be4a4 100644 --- a/keyboards/keychron/q4/iso/config.h +++ b/keyboards/keychron/q4/iso/config.h @@ -17,8 +17,8 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 62 diff --git a/keyboards/keychron/q4/iso/rules.mk b/keyboards/keychron/q4/iso/rules.mk index cad488b009..04fb3f58a3 100644 --- a/keyboards/keychron/q4/iso/rules.mk +++ b/keyboards/keychron/q4/iso/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = no -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q5/ansi/rules.mk b/keyboards/keychron/q5/ansi/rules.mk index e859eb9c34..465dfa9348 100644 --- a/keyboards/keychron/q5/ansi/rules.mk +++ b/keyboards/keychron/q5/ansi/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q5/ansi_encoder/rules.mk b/keyboards/keychron/q5/ansi_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/q5/ansi_encoder/rules.mk +++ b/keyboards/keychron/q5/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q5/config.h b/keyboards/keychron/q5/config.h index bf25cb7441..d459d8c54e 100644 --- a/keyboards/keychron/q5/config.h +++ b/keyboards/keychron/q5/config.h @@ -30,9 +30,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND #define CKLED2001_CURRENT_TUNE \ { 0xB6, 0xB6, 0x56, 0xB6, 0xB6, 0x56, 0xB6, 0xB6, 0x56, 0xB6, 0xB6, 0x56 } diff --git a/keyboards/keychron/q5/iso/rules.mk b/keyboards/keychron/q5/iso/rules.mk index e859eb9c34..465dfa9348 100644 --- a/keyboards/keychron/q5/iso/rules.mk +++ b/keyboards/keychron/q5/iso/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q5/iso_encoder/rules.mk b/keyboards/keychron/q5/iso_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/q5/iso_encoder/rules.mk +++ b/keyboards/keychron/q5/iso_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q6/ansi/rules.mk b/keyboards/keychron/q6/ansi/rules.mk index ec47b77d0f..9383cc955f 100644 --- a/keyboards/keychron/q6/ansi/rules.mk +++ b/keyboards/keychron/q6/ansi/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q6/ansi_encoder/rules.mk b/keyboards/keychron/q6/ansi_encoder/rules.mk index 77b90f2466..929c4532a0 100644 --- a/keyboards/keychron/q6/ansi_encoder/rules.mk +++ b/keyboards/keychron/q6/ansi_encoder/rules.mk @@ -14,8 +14,6 @@ ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q6/config.h b/keyboards/keychron/q6/config.h index 060804057f..98e3642c4d 100644 --- a/keyboards/keychron/q6/config.h +++ b/keyboards/keychron/q6/config.h @@ -24,9 +24,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND #define CKLED2001_CURRENT_TUNE \ { 0xA4, 0xA4, 0x52, 0xA4, 0xA4, 0x52, 0xA4, 0xA4, 0x52, 0xA4, 0xA4, 0x52 } diff --git a/keyboards/keychron/q6/iso/rules.mk b/keyboards/keychron/q6/iso/rules.mk index 6548448302..f16a475f61 100644 --- a/keyboards/keychron/q6/iso/rules.mk +++ b/keyboards/keychron/q6/iso/rules.mk @@ -14,8 +14,6 @@ DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes RAW_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q6/iso_encoder/rules.mk b/keyboards/keychron/q6/iso_encoder/rules.mk index 548b0d696b..712c2ef1fd 100644 --- a/keyboards/keychron/q6/iso_encoder/rules.mk +++ b/keyboards/keychron/q6/iso_encoder/rules.mk @@ -15,8 +15,6 @@ DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes RAW_ENABLE = yes LTO_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q60/ansi/rules.mk b/keyboards/keychron/q60/ansi/rules.mk index 46f5aef144..468ed6fae3 100644 --- a/keyboards/keychron/q60/ansi/rules.mk +++ b/keyboards/keychron/q60/ansi/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q60/config.h b/keyboards/keychron/q60/config.h index 779feea4ce..e5d0954ba0 100644 --- a/keyboards/keychron/q60/config.h +++ b/keyboards/keychron/q60/config.h @@ -17,8 +17,8 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U diff --git a/keyboards/keychron/q65/ansi_encoder/rules.mk b/keyboards/keychron/q65/ansi_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/q65/ansi_encoder/rules.mk +++ b/keyboards/keychron/q65/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/q65/config.h b/keyboards/keychron/q65/config.h index 148ea9ad14..35d05ffab7 100644 --- a/keyboards/keychron/q65/config.h +++ b/keyboards/keychron/q65/config.h @@ -26,9 +26,9 @@ { NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, A2, A3, A4, A5, A6, A7, B0, B1 } /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -37,8 +37,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 30U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE \ { 0xB8, 0xB8, 0x58, 0xB8, 0xB8, 0x58, 0xB8, 0xB8, 0x58, 0xB8, 0xB8, 0x58 } diff --git a/keyboards/keychron/q7/ansi/rules.mk b/keyboards/keychron/q7/ansi/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/q7/ansi/rules.mk +++ b/keyboards/keychron/q7/ansi/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q7/config.h b/keyboards/keychron/q7/config.h index 0ea9ee5f46..125e17a3da 100644 --- a/keyboards/keychron/q7/config.h +++ b/keyboards/keychron/q7/config.h @@ -17,9 +17,9 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -28,8 +28,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define SCAN_PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE \ { 0xF8, 0xF8, 0x80, 0xF8, 0xF8, 0x80, 0xF8, 0xF8, 0x80, 0xF8, 0xF8, 0x80 } diff --git a/keyboards/keychron/q7/iso/rules.mk b/keyboards/keychron/q7/iso/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/q7/iso/rules.mk +++ b/keyboards/keychron/q7/iso/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q8/ansi/rules.mk b/keyboards/keychron/q8/ansi/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/q8/ansi/rules.mk +++ b/keyboards/keychron/q8/ansi/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q8/ansi_encoder/rules.mk b/keyboards/keychron/q8/ansi_encoder/rules.mk index 5091fe9414..5d77f09971 100644 --- a/keyboards/keychron/q8/ansi_encoder/rules.mk +++ b/keyboards/keychron/q8/ansi_encoder/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q8/config.h b/keyboards/keychron/q8/config.h index e0f6c673a5..4b6d5f1614 100644 --- a/keyboards/keychron/q8/config.h +++ b/keyboards/keychron/q8/config.h @@ -20,9 +20,9 @@ // #define MATRIX_UNSELECT_DRIVE_HIGH /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -31,8 +31,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE \ { 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60 } diff --git a/keyboards/keychron/q8/iso/rules.mk b/keyboards/keychron/q8/iso/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/q8/iso/rules.mk +++ b/keyboards/keychron/q8/iso/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q8/iso_encoder/rules.mk b/keyboards/keychron/q8/iso_encoder/rules.mk index 5091fe9414..5d77f09971 100644 --- a/keyboards/keychron/q8/iso_encoder/rules.mk +++ b/keyboards/keychron/q8/iso_encoder/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q9/ansi/rules.mk b/keyboards/keychron/q9/ansi/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/q9/ansi/rules.mk +++ b/keyboards/keychron/q9/ansi/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q9/ansi_encoder/rules.mk b/keyboards/keychron/q9/ansi_encoder/rules.mk index 911c497043..ed8fd33800 100644 --- a/keyboards/keychron/q9/ansi_encoder/rules.mk +++ b/keyboards/keychron/q9/ansi_encoder/rules.mk @@ -14,6 +14,3 @@ ENCODER_ENABLE = yes # Enable Encoder ENCODER_MAP_ENBALE = no DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q9/config.h b/keyboards/keychron/q9/config.h index 742dde3ff2..de5795a5f6 100644 --- a/keyboards/keychron/q9/config.h +++ b/keyboards/keychron/q9/config.h @@ -23,8 +23,8 @@ #define DIP_SWITCH_MATRIX_GRID { { 3, 4 } } /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U diff --git a/keyboards/keychron/q9/iso/rules.mk b/keyboards/keychron/q9/iso/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/q9/iso/rules.mk +++ b/keyboards/keychron/q9/iso/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/q9/iso_encoder/rules.mk b/keyboards/keychron/q9/iso_encoder/rules.mk index 911c497043..ed8fd33800 100644 --- a/keyboards/keychron/q9/iso_encoder/rules.mk +++ b/keyboards/keychron/q9/iso_encoder/rules.mk @@ -14,6 +14,3 @@ ENCODER_ENABLE = yes # Enable Encoder ENCODER_MAP_ENBALE = no DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/s1/ansi/rgb/config.h b/keyboards/keychron/s1/ansi/rgb/config.h index 9cf8df3b82..1f77559339 100644 --- a/keyboards/keychron/s1/ansi/rgb/config.h +++ b/keyboards/keychron/s1/ansi/rgb/config.h @@ -17,15 +17,14 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND #define DRIVER_1_LED_TOTAL 46 #define DRIVER_2_LED_TOTAL 38 #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE \ { 0xA0, 0xA0, 0x48, 0xA0, 0xA0, 0x48, 0xA0, 0xA0, 0x48, 0xA0, 0xA0, 0x48 } diff --git a/keyboards/keychron/s1/ansi/rgb/rules.mk b/keyboards/keychron/s1/ansi/rgb/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/s1/ansi/rgb/rules.mk +++ b/keyboards/keychron/s1/ansi/rgb/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/s1/ansi/white/config.h b/keyboards/keychron/s1/ansi/white/config.h index 65a79726ca..02eeb7fc81 100644 --- a/keyboards/keychron/s1/ansi/white/config.h +++ b/keyboards/keychron/s1/ansi/white/config.h @@ -17,13 +17,12 @@ #pragma once /* LED Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110100 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_GND #define DRIVER_1_LED_TOTAL 84 #define LED_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_6CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_6CHANNEL #define CKLED2001_CURRENT_TUNE \ { 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80 } // 250mA // { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40 } // 127mA diff --git a/keyboards/keychron/s1/ansi/white/rules.mk b/keyboards/keychron/s1/ansi/white/rules.mk index cb70ced917..afcbe18d62 100644 --- a/keyboards/keychron/s1/ansi/white/rules.mk +++ b/keyboards/keychron/s1/ansi/white/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes LED_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v1/ansi/rules.mk b/keyboards/keychron/v1/ansi/rules.mk index e859eb9c34..465dfa9348 100644 --- a/keyboards/keychron/v1/ansi/rules.mk +++ b/keyboards/keychron/v1/ansi/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/ansi_encoder/rules.mk b/keyboards/keychron/v1/ansi_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v1/ansi_encoder/rules.mk +++ b/keyboards/keychron/v1/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/config.h b/keyboards/keychron/v1/config.h index e5b82a143d..8edbf05ca8 100644 --- a/keyboards/keychron/v1/config.h +++ b/keyboards/keychron/v1/config.h @@ -32,9 +32,9 @@ #define DIP_SWITCH_MATRIX_GRID { {5,4} } /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -43,8 +43,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL /* turn off effects when suspended */ #define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/keychron/v1/iso/rules.mk b/keyboards/keychron/v1/iso/rules.mk index e859eb9c34..465dfa9348 100644 --- a/keyboards/keychron/v1/iso/rules.mk +++ b/keyboards/keychron/v1/iso/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/iso_encoder/rules.mk b/keyboards/keychron/v1/iso_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v1/iso_encoder/rules.mk +++ b/keyboards/keychron/v1/iso_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/jis/config.h b/keyboards/keychron/v1/jis/config.h index 300beba867..474a84c8b9 100644 --- a/keyboards/keychron/v1/jis/config.h +++ b/keyboards/keychron/v1/jis/config.h @@ -16,11 +16,6 @@ #pragma once -/* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 - /* RGB Matrix Configuration */ #define DRIVER_1_LED_TOTAL 46 #define DRIVER_2_LED_TOTAL 40 diff --git a/keyboards/keychron/v1/jis/rules.mk b/keyboards/keychron/v1/jis/rules.mk index e859eb9c34..465dfa9348 100644 --- a/keyboards/keychron/v1/jis/rules.mk +++ b/keyboards/keychron/v1/jis/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v1/jis_encoder/rules.mk b/keyboards/keychron/v1/jis_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v1/jis_encoder/rules.mk +++ b/keyboards/keychron/v1/jis_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v10/ansi_encoder/rules.mk b/keyboards/keychron/v10/ansi_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v10/ansi_encoder/rules.mk +++ b/keyboards/keychron/v10/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v10/config.h b/keyboards/keychron/v10/config.h index 9bc5d0f559..b8aa40a186 100644 --- a/keyboards/keychron/v10/config.h +++ b/keyboards/keychron/v10/config.h @@ -31,9 +31,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -42,8 +42,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE { 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A } /* DIP switch */ diff --git a/keyboards/keychron/v10/iso_encoder/rules.mk b/keyboards/keychron/v10/iso_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v10/iso_encoder/rules.mk +++ b/keyboards/keychron/v10/iso_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v2/ansi/rules.mk b/keyboards/keychron/v2/ansi/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/v2/ansi/rules.mk +++ b/keyboards/keychron/v2/ansi/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v2/ansi_encoder/rules.mk b/keyboards/keychron/v2/ansi_encoder/rules.mk index 5091fe9414..5d77f09971 100644 --- a/keyboards/keychron/v2/ansi_encoder/rules.mk +++ b/keyboards/keychron/v2/ansi_encoder/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v2/config.h b/keyboards/keychron/v2/config.h index 08cc5b8e84..8e881da987 100644 --- a/keyboards/keychron/v2/config.h +++ b/keyboards/keychron/v2/config.h @@ -20,9 +20,9 @@ // #define MATRIX_UNSELECT_DRIVE_HIGH /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -31,8 +31,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL /* Disable DIP switch in matrix data */ #define MATRIX_MASKED diff --git a/keyboards/keychron/v2/iso/rules.mk b/keyboards/keychron/v2/iso/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/v2/iso/rules.mk +++ b/keyboards/keychron/v2/iso/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v2/iso_encoder/rules.mk b/keyboards/keychron/v2/iso_encoder/rules.mk index 5091fe9414..5d77f09971 100644 --- a/keyboards/keychron/v2/iso_encoder/rules.mk +++ b/keyboards/keychron/v2/iso_encoder/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v2/jis/rules.mk b/keyboards/keychron/v2/jis/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/v2/jis/rules.mk +++ b/keyboards/keychron/v2/jis/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v2/jis_encoder/rules.mk b/keyboards/keychron/v2/jis_encoder/rules.mk index 5091fe9414..5d77f09971 100644 --- a/keyboards/keychron/v2/jis_encoder/rules.mk +++ b/keyboards/keychron/v2/jis_encoder/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v3/ansi/rules.mk b/keyboards/keychron/v3/ansi/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/v3/ansi/rules.mk +++ b/keyboards/keychron/v3/ansi/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v3/ansi_encoder/rules.mk b/keyboards/keychron/v3/ansi_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v3/ansi_encoder/rules.mk +++ b/keyboards/keychron/v3/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v3/config.h b/keyboards/keychron/v3/config.h index 87ab3c8667..8757f6bace 100644 --- a/keyboards/keychron/v3/config.h +++ b/keyboards/keychron/v3/config.h @@ -20,9 +20,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -31,8 +31,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL /* DIP switch */ #define DIP_SWITCH_MATRIX_GRID { {5, 4} } diff --git a/keyboards/keychron/v3/iso/rules.mk b/keyboards/keychron/v3/iso/rules.mk index 2eadfbded9..118bf40e5a 100644 --- a/keyboards/keychron/v3/iso/rules.mk +++ b/keyboards/keychron/v3/iso/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v3/iso_encoder/rules.mk b/keyboards/keychron/v3/iso_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v3/iso_encoder/rules.mk +++ b/keyboards/keychron/v3/iso_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v3/jis/rules.mk b/keyboards/keychron/v3/jis/rules.mk index c37beecb9e..cf31e094cb 100644 --- a/keyboards/keychron/v3/jis/rules.mk +++ b/keyboards/keychron/v3/jis/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v3/jis_encoder/rules.mk b/keyboards/keychron/v3/jis_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v3/jis_encoder/rules.mk +++ b/keyboards/keychron/v3/jis_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v4/ansi/rules.mk b/keyboards/keychron/v4/ansi/rules.mk index 46f5aef144..468ed6fae3 100644 --- a/keyboards/keychron/v4/ansi/rules.mk +++ b/keyboards/keychron/v4/ansi/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v4/config.h b/keyboards/keychron/v4/config.h index 8d92219f20..2fc94aaaee 100644 --- a/keyboards/keychron/v4/config.h +++ b/keyboards/keychron/v4/config.h @@ -17,8 +17,8 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 1 -#define DRIVER_ADDR_1 0b1110111 +#define CKLED2001_DRIVER_COUNT 1 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U diff --git a/keyboards/keychron/v4/iso/rules.mk b/keyboards/keychron/v4/iso/rules.mk index 46f5aef144..468ed6fae3 100644 --- a/keyboards/keychron/v4/iso/rules.mk +++ b/keyboards/keychron/v4/iso/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v5/ansi/rules.mk b/keyboards/keychron/v5/ansi/rules.mk index e859eb9c34..465dfa9348 100644 --- a/keyboards/keychron/v5/ansi/rules.mk +++ b/keyboards/keychron/v5/ansi/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v5/ansi_encoder/rules.mk b/keyboards/keychron/v5/ansi_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v5/ansi_encoder/rules.mk +++ b/keyboards/keychron/v5/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v5/config.h b/keyboards/keychron/v5/config.h index 142dfead34..0ee5e4e46b 100644 --- a/keyboards/keychron/v5/config.h +++ b/keyboards/keychron/v5/config.h @@ -26,9 +26,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U diff --git a/keyboards/keychron/v5/iso/rules.mk b/keyboards/keychron/v5/iso/rules.mk index e859eb9c34..465dfa9348 100644 --- a/keyboards/keychron/v5/iso/rules.mk +++ b/keyboards/keychron/v5/iso/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v5/iso_encoder/rules.mk b/keyboards/keychron/v5/iso_encoder/rules.mk index 7da353fbd1..4c6e5bebf0 100644 --- a/keyboards/keychron/v5/iso_encoder/rules.mk +++ b/keyboards/keychron/v5/iso_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v6/ansi/rules.mk b/keyboards/keychron/v6/ansi/rules.mk index 980311d3f2..eff255ee8c 100644 --- a/keyboards/keychron/v6/ansi/rules.mk +++ b/keyboards/keychron/v6/ansi/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v6/ansi_encoder/rules.mk b/keyboards/keychron/v6/ansi_encoder/rules.mk index 80a3f300bd..213c733c9c 100644 --- a/keyboards/keychron/v6/ansi_encoder/rules.mk +++ b/keyboards/keychron/v6/ansi_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v6/config.h b/keyboards/keychron/v6/config.h index 38cff19e6b..e836cced84 100644 --- a/keyboards/keychron/v6/config.h +++ b/keyboards/keychron/v6/config.h @@ -20,9 +20,9 @@ #define DIODE_DIRECTION ROW2COL /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U diff --git a/keyboards/keychron/v6/iso/rules.mk b/keyboards/keychron/v6/iso/rules.mk index 980311d3f2..eff255ee8c 100644 --- a/keyboards/keychron/v6/iso/rules.mk +++ b/keyboards/keychron/v6/iso/rules.mk @@ -12,8 +12,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v6/iso_encoder/rules.mk b/keyboards/keychron/v6/iso_encoder/rules.mk index 9867724957..39b0594039 100644 --- a/keyboards/keychron/v6/iso_encoder/rules.mk +++ b/keyboards/keychron/v6/iso_encoder/rules.mk @@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash # custom matrix setup CUSTOM_MATRIX = lite diff --git a/keyboards/keychron/v7/ansi/rules.mk b/keyboards/keychron/v7/ansi/rules.mk index 46f5aef144..468ed6fae3 100644 --- a/keyboards/keychron/v7/ansi/rules.mk +++ b/keyboards/keychron/v7/ansi/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v7/config.h b/keyboards/keychron/v7/config.h index c439a7e366..606f682719 100644 --- a/keyboards/keychron/v7/config.h +++ b/keyboards/keychron/v7/config.h @@ -17,9 +17,9 @@ #pragma once /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -28,8 +28,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define SCAN_PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE { 0xFC, 0xFC, 0x70, 0xFC, 0xFC, 0x70, 0xFC, 0xFC, 0x70, 0xFC, 0xFC, 0x70 } /* DIP switch */ diff --git a/keyboards/keychron/v7/iso/rules.mk b/keyboards/keychron/v7/iso/rules.mk index 46f5aef144..468ed6fae3 100644 --- a/keyboards/keychron/v7/iso/rules.mk +++ b/keyboards/keychron/v7/iso/rules.mk @@ -12,6 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v8/ansi/rules.mk b/keyboards/keychron/v8/ansi/rules.mk index e506e322d5..08a7658da3 100644 --- a/keyboards/keychron/v8/ansi/rules.mk +++ b/keyboards/keychron/v8/ansi/rules.mk @@ -14,6 +14,3 @@ ENCODER_ENABLE = no # Enable Encoder ENCODER_MAP_ENABLE = no DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v8/ansi_encoder/rules.mk b/keyboards/keychron/v8/ansi_encoder/rules.mk index e3b0d8f03f..d53dc0f5d5 100644 --- a/keyboards/keychron/v8/ansi_encoder/rules.mk +++ b/keyboards/keychron/v8/ansi_encoder/rules.mk @@ -14,6 +14,3 @@ ENCODER_ENABLE = yes # Enable Encoder ENCODER_MAP_ENABLE = no DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v8/config.h b/keyboards/keychron/v8/config.h index 7c6076e199..3dc6d58518 100644 --- a/keyboards/keychron/v8/config.h +++ b/keyboards/keychron/v8/config.h @@ -20,9 +20,9 @@ // #define MATRIX_UNSELECT_DRIVE_HIGH /* RGB Matrix Driver Configuration */ -#define DRIVER_COUNT 2 -#define DRIVER_ADDR_1 0b1110111 -#define DRIVER_ADDR_2 0b1110100 +#define CKLED2001_DRIVER_COUNT 2 +#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO +#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND /* Increase I2C speed to 1000 KHz */ #define I2C1_TIMINGR_PRESC 0U @@ -31,8 +31,7 @@ #define I2C1_TIMINGR_SCLH 15U #define I2C1_TIMINGR_SCLL 51U -/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */ -#define PHASE_CHANNEL MSKPHASE_9CHANNEL +#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL #define CKLED2001_CURRENT_TUNE { 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60 } /* DIP switch */ diff --git a/keyboards/keychron/v8/iso/rules.mk b/keyboards/keychron/v8/iso/rules.mk index 8edab2465b..4aa9221c24 100644 --- a/keyboards/keychron/v8/iso/rules.mk +++ b/keyboards/keychron/v8/iso/rules.mk @@ -13,6 +13,3 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no # Enable Encoder DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - diff --git a/keyboards/keychron/v8/iso_encoder/rules.mk b/keyboards/keychron/v8/iso_encoder/rules.mk index e3b0d8f03f..d53dc0f5d5 100644 --- a/keyboards/keychron/v8/iso_encoder/rules.mk +++ b/keyboards/keychron/v8/iso_encoder/rules.mk @@ -14,6 +14,3 @@ ENCODER_ENABLE = yes # Enable Encoder ENCODER_MAP_ENABLE = no DIP_SWITCH_ENABLE = yes RGB_MATRIX_ENABLE = yes -EEPROM_DRIVER = wear_leveling -WEAR_LEVELING_DRIVER = embedded_flash - |