7 files changed, 11 insertions, 16 deletions
diff --git a/keyboards/keychron/v10/ansi_encoder/ansi_encoder.c b/keyboards/keychron/v10/ansi_encoder/ansi_encoder.c
index bada8af6e9..8b787aad18 100644
--- a/keyboards/keychron/v10/ansi_encoder/ansi_encoder.c
+++ b/keyboards/keychron/v10/ansi_encoder/ansi_encoder.c
@@ -20,8 +20,8 @@
 
 // clang-format off
 
-const ckled2001_led PROGMEM g_ckled2001_leds[RGB_MATRIX_LED_COUNT] = {
-/* Refer to IS31 manual for these locations
+const snled27351_led_t PROGMEM g_snled27351_leds[RGB_MATRIX_LED_COUNT] = {
+/* Refer to SNLED27351 manual for these locations
  *   driver
  *   |  R location
  *   |  |       G location
diff --git a/keyboards/keychron/v10/ansi_encoder/info.json b/keyboards/keychron/v10/ansi_encoder/info.json
index 2a7dc307cb..a416601d02 100644
--- a/keyboards/keychron/v10/ansi_encoder/info.json
+++ b/keyboards/keychron/v10/ansi_encoder/info.json
@@ -9,7 +9,7 @@
         "device_version": "1.0.0"
     },
     "rgb_matrix": {
-        "driver": "ckled2001"
+        "driver": "snled27351"
     },
     "encoder": {
         "rotary": [
diff --git a/keyboards/keychron/v10/ansi_encoder/rules.mk b/keyboards/keychron/v10/ansi_encoder/rules.mk
index 7da353fbd1..4c6e5bebf0 100644
--- a/keyboards/keychron/v10/ansi_encoder/rules.mk
+++ b/keyboards/keychron/v10/ansi_encoder/rules.mk
@@ -13,8 +13,6 @@ AUDIO_ENABLE = no           # Audio output
 ENCODER_ENABLE = yes        # Enable Encoder
 DIP_SWITCH_ENABLE = yes
 RGB_MATRIX_ENABLE = yes
-EEPROM_DRIVER = wear_leveling
-WEAR_LEVELING_DRIVER = embedded_flash
 
 # custom matrix setup
 CUSTOM_MATRIX = lite
diff --git a/keyboards/keychron/v10/config.h b/keyboards/keychron/v10/config.h
index 9bc5d0f559..e711b753dd 100644
--- a/keyboards/keychron/v10/config.h
+++ b/keyboards/keychron/v10/config.h
@@ -31,9 +31,9 @@
 #define DIODE_DIRECTION ROW2COL
 
 /* RGB Matrix Driver Configuration */
-#define DRIVER_COUNT 2
-#define DRIVER_ADDR_1 0b1110111
-#define DRIVER_ADDR_2 0b1110100
+#define SNLED27351_DRIVER_COUNT 2
+#define DRIVER_ADDR_1 SNLED27351_I2C_ADDRESS_VDDIO
+#define DRIVER_ADDR_2 SNLED27351_I2C_ADDRESS_GND
 
 /* Increase I2C speed to 1000 KHz */
 #define I2C1_TIMINGR_PRESC 0U
@@ -42,9 +42,8 @@
 #define I2C1_TIMINGR_SCLH 15U
 #define I2C1_TIMINGR_SCLL 51U
 
-/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */
-#define PHASE_CHANNEL MSKPHASE_9CHANNEL
-#define CKLED2001_CURRENT_TUNE { 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A }
+#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
+#define SNLED27351_CURRENT_TUNE { 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A }
 
 /* DIP switch */
 #define DIP_SWITCH_MATRIX_GRID  { {5,5} }
diff --git a/keyboards/keychron/v10/iso_encoder/info.json b/keyboards/keychron/v10/iso_encoder/info.json
index 455b375472..4c6b6580e0 100644
--- a/keyboards/keychron/v10/iso_encoder/info.json
+++ b/keyboards/keychron/v10/iso_encoder/info.json
@@ -9,7 +9,7 @@
         "device_version": "1.0.0"
     },
     "rgb_matrix": {
-        "driver": "ckled2001"
+        "driver": "snled27351"
     },
     "encoder": {
         "rotary": [
diff --git a/keyboards/keychron/v10/iso_encoder/iso_encoder.c b/keyboards/keychron/v10/iso_encoder/iso_encoder.c
index 070a01a8a8..f7e0a10470 100644
--- a/keyboards/keychron/v10/iso_encoder/iso_encoder.c
+++ b/keyboards/keychron/v10/iso_encoder/iso_encoder.c
@@ -20,8 +20,8 @@
 
 // clang-format off
 
-const ckled2001_led PROGMEM g_ckled2001_leds[RGB_MATRIX_LED_COUNT] = {
-/* Refer to IS31 manual for these locations
+const snled27351_led_t PROGMEM g_snled27351_leds[RGB_MATRIX_LED_COUNT] = {
+/* Refer to SNLED27351 manual for these locations
  *   driver
  *   |  R location
  *   |  |       G location
diff --git a/keyboards/keychron/v10/iso_encoder/rules.mk b/keyboards/keychron/v10/iso_encoder/rules.mk
index 7da353fbd1..4c6e5bebf0 100644
--- a/keyboards/keychron/v10/iso_encoder/rules.mk
+++ b/keyboards/keychron/v10/iso_encoder/rules.mk
@@ -13,8 +13,6 @@ AUDIO_ENABLE = no           # Audio output
 ENCODER_ENABLE = yes        # Enable Encoder
 DIP_SWITCH_ENABLE = yes
 RGB_MATRIX_ENABLE = yes
-EEPROM_DRIVER = wear_leveling
-WEAR_LEVELING_DRIVER = embedded_flash
 
 # custom matrix setup
 CUSTOM_MATRIX = lite