3 files changed, 4 insertions, 9 deletions
diff --git a/keyboards/keychron/q10/ansi_encoder/rules.mk b/keyboards/keychron/q10/ansi_encoder/rules.mk
index 7da353fbd1..4c6e5bebf0 100644
--- a/keyboards/keychron/q10/ansi_encoder/rules.mk
+++ b/keyboards/keychron/q10/ansi_encoder/rules.mk
@@ -13,8 +13,6 @@ AUDIO_ENABLE = no           # Audio output
 ENCODER_ENABLE = yes        # Enable Encoder
 DIP_SWITCH_ENABLE = yes
 RGB_MATRIX_ENABLE = yes
-EEPROM_DRIVER = wear_leveling
-WEAR_LEVELING_DRIVER = embedded_flash
 
 # custom matrix setup
 CUSTOM_MATRIX = lite
diff --git a/keyboards/keychron/q10/config.h b/keyboards/keychron/q10/config.h
index 0ef4edf245..3a0d613510 100644
--- a/keyboards/keychron/q10/config.h
+++ b/keyboards/keychron/q10/config.h
@@ -30,9 +30,9 @@
 #define DIODE_DIRECTION ROW2COL
 
 /* RGB Matrix Driver Configuration */
-#define DRIVER_COUNT 2
-#define DRIVER_ADDR_1 0b1110111
-#define DRIVER_ADDR_2 0b1110100
+#define CKLED2001_DRIVER_COUNT 2
+#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO
+#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND
 
 /* Increase I2C speed to 1000 KHz */
 #define I2C1_TIMINGR_PRESC 0U
@@ -41,8 +41,7 @@
 #define I2C1_TIMINGR_SCLH 15U
 #define I2C1_TIMINGR_SCLL 51U
 
-/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */
-#define PHASE_CHANNEL MSKPHASE_9CHANNEL
+#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL
 #define CKLED2001_CURRENT_TUNE \
     { 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A }
 
diff --git a/keyboards/keychron/q10/iso_encoder/rules.mk b/keyboards/keychron/q10/iso_encoder/rules.mk
index 7da353fbd1..4c6e5bebf0 100644
--- a/keyboards/keychron/q10/iso_encoder/rules.mk
+++ b/keyboards/keychron/q10/iso_encoder/rules.mk
@@ -13,8 +13,6 @@ AUDIO_ENABLE = no           # Audio output
 ENCODER_ENABLE = yes        # Enable Encoder
 DIP_SWITCH_ENABLE = yes
 RGB_MATRIX_ENABLE = yes
-EEPROM_DRIVER = wear_leveling
-WEAR_LEVELING_DRIVER = embedded_flash
 
 # custom matrix setup
 CUSTOM_MATRIX = lite