summaryrefslogtreecommitdiff
path: root/keyboards/keychron/q10
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/keychron/q10')
-rw-r--r--keyboards/keychron/q10/ansi_encoder/rules.mk2
-rw-r--r--keyboards/keychron/q10/config.h9
-rw-r--r--keyboards/keychron/q10/iso_encoder/rules.mk2
3 files changed, 4 insertions, 9 deletions
diff --git a/keyboards/keychron/q10/ansi_encoder/rules.mk b/keyboards/keychron/q10/ansi_encoder/rules.mk
index 7da353fbd1..4c6e5bebf0 100644
--- a/keyboards/keychron/q10/ansi_encoder/rules.mk
+++ b/keyboards/keychron/q10/ansi_encoder/rules.mk
@@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes # Enable Encoder
DIP_SWITCH_ENABLE = yes
RGB_MATRIX_ENABLE = yes
-EEPROM_DRIVER = wear_leveling
-WEAR_LEVELING_DRIVER = embedded_flash
# custom matrix setup
CUSTOM_MATRIX = lite
diff --git a/keyboards/keychron/q10/config.h b/keyboards/keychron/q10/config.h
index 0ef4edf245..3a0d613510 100644
--- a/keyboards/keychron/q10/config.h
+++ b/keyboards/keychron/q10/config.h
@@ -30,9 +30,9 @@
#define DIODE_DIRECTION ROW2COL
/* RGB Matrix Driver Configuration */
-#define DRIVER_COUNT 2
-#define DRIVER_ADDR_1 0b1110111
-#define DRIVER_ADDR_2 0b1110100
+#define CKLED2001_DRIVER_COUNT 2
+#define DRIVER_ADDR_1 CKLED2001_I2C_ADDRESS_VDDIO
+#define DRIVER_ADDR_2 CKLED2001_I2C_ADDRESS_GND
/* Increase I2C speed to 1000 KHz */
#define I2C1_TIMINGR_PRESC 0U
@@ -41,8 +41,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
-/* Scan phase of led driver set as MSKPHASE_9CHANNEL(defined as 0x03 in CKLED2001.h) */
-#define PHASE_CHANNEL MSKPHASE_9CHANNEL
+#define CKLED2001_PHASE_CHANNEL CKLED2001_MSKPHASE_9CHANNEL
#define CKLED2001_CURRENT_TUNE \
{ 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A }
diff --git a/keyboards/keychron/q10/iso_encoder/rules.mk b/keyboards/keychron/q10/iso_encoder/rules.mk
index 7da353fbd1..4c6e5bebf0 100644
--- a/keyboards/keychron/q10/iso_encoder/rules.mk
+++ b/keyboards/keychron/q10/iso_encoder/rules.mk
@@ -13,8 +13,6 @@ AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes # Enable Encoder
DIP_SWITCH_ENABLE = yes
RGB_MATRIX_ENABLE = yes
-EEPROM_DRIVER = wear_leveling
-WEAR_LEVELING_DRIVER = embedded_flash
# custom matrix setup
CUSTOM_MATRIX = lite