summaryrefslogtreecommitdiff
path: root/keyboards/kbdfans
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/kbdfans')
-rw-r--r--keyboards/kbdfans/kbd19x/config.h218
-rw-r--r--keyboards/kbdfans/kbd19x/info.json218
-rw-r--r--keyboards/kbdfans/kbd19x/kbd19x.c63
-rw-r--r--keyboards/kbdfans/kbd19x/kbd19x.h103
-rw-r--r--keyboards/kbdfans/kbd19x/keymaps/default/config.h20
-rw-r--r--keyboards/kbdfans/kbd19x/keymaps/default/keymap.c52
-rw-r--r--keyboards/kbdfans/kbd19x/keymaps/default/readme.md13
-rw-r--r--keyboards/kbdfans/kbd19x/readme.md19
-rw-r--r--keyboards/kbdfans/kbd19x/rules.mk80
-rw-r--r--keyboards/kbdfans/kbd4x/config.h218
-rw-r--r--keyboards/kbdfans/kbd4x/info.json112
-rw-r--r--keyboards/kbdfans/kbd4x/kbd4x.c43
-rw-r--r--keyboards/kbdfans/kbd4x/kbd4x.h48
-rw-r--r--keyboards/kbdfans/kbd4x/keymaps/default/config.h19
-rw-r--r--keyboards/kbdfans/kbd4x/keymaps/default/keymap.c52
-rw-r--r--keyboards/kbdfans/kbd4x/keymaps/default/readme.md1
-rw-r--r--keyboards/kbdfans/kbd4x/readme.md15
-rw-r--r--keyboards/kbdfans/kbd4x/rules.mk81
-rw-r--r--keyboards/kbdfans/kbd66/config.h185
-rw-r--r--keyboards/kbdfans/kbd66/info.json13
-rw-r--r--keyboards/kbdfans/kbd66/kbd66.c43
-rw-r--r--keyboards/kbdfans/kbd66/kbd66.h36
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/ansi/config.h24
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/ansi/keymap.c99
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/ansi/readme.md11
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/default/config.h24
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/default/keymap.c99
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/default/readme.md12
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/iso/config.h24
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/iso/keymap.c99
-rw-r--r--keyboards/kbdfans/kbd66/keymaps/iso/readme.md11
-rwxr-xr-xkeyboards/kbdfans/kbd66/keymaps/maartenwut/config.h24
-rwxr-xr-xkeyboards/kbdfans/kbd66/keymaps/maartenwut/keymap.c62
-rwxr-xr-xkeyboards/kbdfans/kbd66/keymaps/maartenwut/readme.md3
-rw-r--r--keyboards/kbdfans/kbd66/readme.md15
-rw-r--r--keyboards/kbdfans/kbd66/rules.mk68
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/config.h240
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/hotswap.c43
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/hotswap.h43
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/info.json12
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/keymaps/default/config.h19
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/keymaps/default/keymap.c72
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/keymaps/default/readme.md1
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/config.h22
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/keymap.c176
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/readme.md27
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/rules.mk2
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/readme.md13
-rw-r--r--keyboards/kbdfans/kbd67/hotswap/rules.mk80
-rw-r--r--keyboards/kbdfans/kbd67/readme.md15
-rw-r--r--keyboards/kbdfans/kbd67/rev1/config.h235
-rw-r--r--keyboards/kbdfans/kbd67/rev1/info.json16
-rw-r--r--keyboards/kbdfans/kbd67/rev1/keymaps/default/config.h19
-rw-r--r--keyboards/kbdfans/kbd67/rev1/keymaps/default/keymap.c99
-rw-r--r--keyboards/kbdfans/kbd67/rev1/keymaps/default/readme.md1
-rw-r--r--keyboards/kbdfans/kbd67/rev1/readme.md13
-rw-r--r--keyboards/kbdfans/kbd67/rev1/rev1.c51
-rw-r--r--keyboards/kbdfans/kbd67/rev1/rev1.h59
-rw-r--r--keyboards/kbdfans/kbd67/rev1/rules.mk80
-rw-r--r--keyboards/kbdfans/kbd6x/config.h218
-rw-r--r--keyboards/kbdfans/kbd6x/info.json12
-rw-r--r--keyboards/kbdfans/kbd6x/kbd6x.c49
-rw-r--r--keyboards/kbdfans/kbd6x/kbd6x.h36
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/default/keymap.c48
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/default/readme.md1
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/hhkb-default-improved/keymap.c50
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/hhkb-default-improved/readme.md1
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/hhkb-default/keymap.c51
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/hhkb-default/readme.md1
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h4
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c92
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk2
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/othi/config.h10
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/othi/keymap.c190
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/othi/readme.md56
-rw-r--r--keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk19
-rw-r--r--keyboards/kbdfans/kbd6x/readme.md13
-rw-r--r--keyboards/kbdfans/kbd6x/rules.mk70
-rw-r--r--keyboards/kbdfans/kbd75/config.h50
-rw-r--r--keyboards/kbdfans/kbd75/kbd75.c1
-rw-r--r--keyboards/kbdfans/kbd75/kbd75.h15
-rw-r--r--keyboards/kbdfans/kbd75/keymaps/adit/keymap.c78
-rw-r--r--keyboards/kbdfans/kbd75/keymaps/default/keymap.c22
-rw-r--r--keyboards/kbdfans/kbd75/keymaps/edulpn/README.md13
-rw-r--r--keyboards/kbdfans/kbd75/keymaps/edulpn/keymap.c67
-rw-r--r--keyboards/kbdfans/kbd75/keymaps/iso/keymap.c22
-rw-r--r--keyboards/kbdfans/kbd75/keymaps/smt/keymap.c176
-rw-r--r--keyboards/kbdfans/kbd75/keymaps/spacemanspiff/keymap.c41
-rw-r--r--keyboards/kbdfans/kbd75/keymaps/spacemanspiff/readme.md35
-rw-r--r--keyboards/kbdfans/kbd75/readme.md17
-rw-r--r--keyboards/kbdfans/kbd75/rev1/info.json33
-rw-r--r--keyboards/kbdfans/kbd75/rev1/rev1.c12
-rw-r--r--keyboards/kbdfans/kbd75/rev1/rev1.h118
-rw-r--r--keyboards/kbdfans/kbd75/rev1/rules.mk56
-rw-r--r--keyboards/kbdfans/kbd75/rev2/info.json37
-rw-r--r--keyboards/kbdfans/kbd75/rev2/rev2.c12
-rw-r--r--keyboards/kbdfans/kbd75/rev2/rev2.h25
-rw-r--r--keyboards/kbdfans/kbd75/rev2/rules.mk56
-rw-r--r--keyboards/kbdfans/kbd75/rules.mk1
-rw-r--r--keyboards/kbdfans/kbd8x/config.h190
-rw-r--r--keyboards/kbdfans/kbd8x/info.json16
-rw-r--r--keyboards/kbdfans/kbd8x/kbd8x.c72
-rw-r--r--keyboards/kbdfans/kbd8x/kbd8x.h69
-rw-r--r--keyboards/kbdfans/kbd8x/keymaps/default/config.h17
-rw-r--r--keyboards/kbdfans/kbd8x/keymaps/default/keymap.c68
-rw-r--r--keyboards/kbdfans/kbd8x/keymaps/default/readme.md3
-rw-r--r--keyboards/kbdfans/kbd8x/keymaps/default_backlighting/config.h17
-rw-r--r--keyboards/kbdfans/kbd8x/keymaps/default_backlighting/keymap.c67
-rw-r--r--keyboards/kbdfans/kbd8x/keymaps/default_backlighting/readme.md3
-rw-r--r--keyboards/kbdfans/kbd8x/keymaps/default_backlighting/rules.mk1
-rw-r--r--keyboards/kbdfans/kbd8x/readme.md15
-rw-r--r--keyboards/kbdfans/kbd8x/rules.mk69
-rw-r--r--keyboards/kbdfans/readme.md17
113 files changed, 5999 insertions, 0 deletions
diff --git a/keyboards/kbdfans/kbd19x/config.h b/keyboards/kbdfans/kbd19x/config.h
new file mode 100644
index 0000000000..03b701b1cc
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/config.h
@@ -0,0 +1,218 @@
+/*
+Copyright 2018 Jeff Shufelt <jshuf@puppyfish.com> @jshuf
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER KBDFans
+#define PRODUCT kbd19x
+#define DESCRIPTION A compact-1800 keyboard kit.
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B7, B3, E6, F0, D5, D4, D6, C7 }
+#define MATRIX_COL_PINS { C6, F1, F4, F5, F6, F7, D7, B4, B5, D0, D1, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 18
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
diff --git a/keyboards/kbdfans/kbd19x/info.json b/keyboards/kbdfans/kbd19x/info.json
new file mode 100644
index 0000000000..31f2f9cf57
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/info.json
@@ -0,0 +1,218 @@
+{
+ "keyboard_name": "KBD19x",
+ "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/kbd19x",
+ "maintainer": "qmk",
+ "width": 19.5,
+ "height": 6.75,
+ "layouts": {
+ "LAYOUT_ansi": {
+ "key_count": 99,
+ "layout": [{"label":"Esc", "x":0, "y":0},
+ {"label":"F1", "x":1.25, "y":0},
+ {"label":"F2", "x":2.25, "y":0},
+ {"label":"F3", "x":3.25, "y":0},
+ {"label":"F4", "x":4.25, "y":0},
+ {"label":"F5", "x":5.5, "y":0},
+ {"label":"F6", "x":6.5, "y":0},
+ {"label":"F7", "x":7.5, "y":0},
+ {"label":"F8", "x":8.5, "y":0},
+ {"label":"F9", "x":9.75, "y":0},
+ {"label":"F10", "x":10.75, "y":0},
+ {"label":"F11", "x":11.75, "y":0},
+ {"label":"F12", "x":12.75, "y":0},
+ {"label":"BkLgt Step", "x":14, "y":0},
+ {"label":"Print Screen", "x":15.5, "y":0},
+ {"label":"Scroll Lock", "x":16.5, "y":0},
+ {"label":"Pause Break", "x":17.5, "y":0},
+ {"label":"PgDn", "x":18.5, "y":0},
+ {"label":"~", "x":0, "y":1.5},
+ {"label":"!", "x":1, "y":1.5},
+ {"label":"@", "x":2, "y":1.5},
+ {"label":"#", "x":3, "y":1.5},
+ {"label":"$", "x":4, "y":1.5},
+ {"label":"%", "x":5, "y":1.5},
+ {"label":"^", "x":6, "y":1.5},
+ {"label":"&", "x":7, "y":1.5},
+ {"label":"*", "x":8, "y":1.5},
+ {"label":"(", "x":9, "y":1.5},
+ {"label":")", "x":10, "y":1.5},
+ {"label":"_", "x":11, "y":1.5},
+ {"label":"+", "x":12, "y":1.5},
+ {"label":"Backspace", "x":13, "y":1.5, "w":2},
+ {"label":"Num Lock", "x":15.5, "y":1.5},
+ {"label":"/", "x":16.5, "y":1.5},
+ {"label":"*", "x":17.5, "y":1.5},
+ {"label":"-", "x":18.5, "y":1.5},
+ {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+ {"label":"Q", "x":1.5, "y":2.5},
+ {"label":"W", "x":2.5, "y":2.5},
+ {"label":"E", "x":3.5, "y":2.5},
+ {"label":"R", "x":4.5, "y":2.5},
+ {"label":"T", "x":5.5, "y":2.5},
+ {"label":"Y", "x":6.5, "y":2.5},
+ {"label":"U", "x":7.5, "y":2.5},
+ {"label":"I", "x":8.5, "y":2.5},
+ {"label":"O", "x":9.5, "y":2.5},
+ {"label":"P", "x":10.5, "y":2.5},
+ {"label":"{", "x":11.5, "y":2.5},
+ {"label":"}", "x":12.5, "y":2.5},
+ {"label":"|", "x":13.5, "y":2.5, "w":1.5},
+ {"label":"7", "x":15.5, "y":2.5},
+ {"label":"8", "x":16.5, "y":2.5},
+ {"label":"9", "x":17.5, "y":2.5},
+ {"label":"+", "x":18.5, "y":2.5, "h":2},
+ {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+ {"label":"A", "x":1.75, "y":3.5},
+ {"label":"S", "x":2.75, "y":3.5},
+ {"label":"D", "x":3.75, "y":3.5},
+ {"label":"F", "x":4.75, "y":3.5},
+ {"label":"G", "x":5.75, "y":3.5},
+ {"label":"H", "x":6.75, "y":3.5},
+ {"label":"J", "x":7.75, "y":3.5},
+ {"label":"K", "x":8.75, "y":3.5},
+ {"label":"L", "x":9.75, "y":3.5},
+ {"label":":", "x":10.75, "y":3.5},
+ {"label":"\"", "x":11.75, "y":3.5},
+ {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
+ {"label":"4", "x":15.5, "y":3.5},
+ {"label":"5", "x":16.5, "y":3.5},
+ {"label":"6", "x":17.5, "y":3.5},
+ {"label":"Shift", "x":0, "y":4.5, "w":2.25},
+ {"label":"Z", "x":2.25, "y":4.5},
+ {"label":"X", "x":3.25, "y":4.5},
+ {"label":"C", "x":4.25, "y":4.5},
+ {"label":"V", "x":5.25, "y":4.5},
+ {"label":"B", "x":6.25, "y":4.5},
+ {"label":"N", "x":7.25, "y":4.5},
+ {"label":"M", "x":8.25, "y":4.5},
+ {"label":"<", "x":9.25, "y":4.5},
+ {"label":">", "x":10.25, "y":4.5},
+ {"label":"?", "x":11.25, "y":4.5},
+ {"label":"Shift", "x":12.25, "y":4.5, "w":1.75},
+ {"label":"1", "x":15.5, "y":4.5},
+ {"label":"2", "x":16.5, "y":4.5},
+ {"label":"3", "x":17.5, "y":4.5},
+ {"label":"Enter", "x":18.5, "y":4.5, "h":2},
+ {"label":"\u2191", "x":14.25, "y":4.75},
+ {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+ {"label":"Win", "x":1.25, "y":5.5},
+ {"label":"Alt", "x":2.25, "y":5.5, "w":1.25},
+ {"x":3.5, "y":5.5, "w":6.25},
+ {"label":"Alt", "x":9.75, "y":5.5},
+ {"label":"MO(1)", "x":10.75, "y":5.5},
+ {"label":"Ctrl", "x":11.75, "y":5.5, "w":1.25},
+ {"label":"0", "x":16.5, "y":5.5},
+ {"label":".", "x":17.5, "y":5.5},
+ {"label":"\u2190", "x":13.25, "y":5.75},
+ {"label":"\u2193", "x":14.25, "y":5.75},
+ {"label":"\u2192", "x":15.25, "y":5.75}]
+ },
+ "LAYOUT_all": {
+ "key_count": 103,
+ "layout": [{"label":"Esc", "x":0, "y":0},
+ {"label":"F1", "x":1.25, "y":0},
+ {"label":"F2", "x":2.25, "y":0},
+ {"label":"F3", "x":3.25, "y":0},
+ {"label":"F4", "x":4.25, "y":0},
+ {"label":"F5", "x":5.5, "y":0},
+ {"label":"F6", "x":6.5, "y":0},
+ {"label":"F7", "x":7.5, "y":0},
+ {"label":"F8", "x":8.5, "y":0},
+ {"label":"F9", "x":9.75, "y":0},
+ {"label":"F10", "x":10.75, "y":0},
+ {"label":"F11", "x":11.75, "y":0},
+ {"label":"F12", "x":12.75, "y":0},
+ {"label":"BkLgt Step", "x":14, "y":0},
+ {"label":"Print Screen", "x":15.5, "y":0},
+ {"label":"Scroll Lock", "x":16.5, "y":0},
+ {"label":"Pause Break", "x":17.5, "y":0},
+ {"label":"PgDn", "x":18.5, "y":0},
+ {"label":"~", "x":0, "y":1.5},
+ {"label":"!", "x":1, "y":1.5},
+ {"label":"@", "x":2, "y":1.5},
+ {"label":"#", "x":3, "y":1.5},
+ {"label":"$", "x":4, "y":1.5},
+ {"label":"%", "x":5, "y":1.5},
+ {"label":"^", "x":6, "y":1.5},
+ {"label":"&", "x":7, "y":1.5},
+ {"label":"*", "x":8, "y":1.5},
+ {"label":"(", "x":9, "y":1.5},
+ {"label":")", "x":10, "y":1.5},
+ {"label":"_", "x":11, "y":1.5},
+ {"label":"+", "x":12, "y":1.5},
+ {"x":13, "y":1.5},
+ {"label":"BS", "x":14, "y":1.5},
+ {"label":"Num Lock", "x":15.5, "y":1.5},
+ {"label":"/", "x":16.5, "y":1.5},
+ {"label":"*", "x":17.5, "y":1.5},
+ {"label":"-", "x":18.5, "y":1.5},
+ {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+ {"label":"Q", "x":1.5, "y":2.5},
+ {"label":"W", "x":2.5, "y":2.5},
+ {"label":"E", "x":3.5, "y":2.5},
+ {"label":"R", "x":4.5, "y":2.5},
+ {"label":"T", "x":5.5, "y":2.5},
+ {"label":"Y", "x":6.5, "y":2.5},
+ {"label":"U", "x":7.5, "y":2.5},
+ {"label":"I", "x":8.5, "y":2.5},
+ {"label":"O", "x":9.5, "y":2.5},
+ {"label":"P", "x":10.5, "y":2.5},
+ {"label":"{", "x":11.5, "y":2.5},
+ {"label":"}", "x":12.5, "y":2.5},
+ {"label":"|", "x":13.5, "y":2.5, "w":1.5},
+ {"label":"7", "x":15.5, "y":2.5},
+ {"label":"8", "x":16.5, "y":2.5},
+ {"label":"9", "x":17.5, "y":2.5},
+ {"label":"+", "x":18.5, "y":2.5},
+ {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+ {"label":"A", "x":1.75, "y":3.5},
+ {"label":"S", "x":2.75, "y":3.5},
+ {"label":"D", "x":3.75, "y":3.5},
+ {"label":"F", "x":4.75, "y":3.5},
+ {"label":"G", "x":5.75, "y":3.5},
+ {"label":"H", "x":6.75, "y":3.5},
+ {"label":"J", "x":7.75, "y":3.5},
+ {"label":"K", "x":8.75, "y":3.5},
+ {"label":"L", "x":9.75, "y":3.5},
+ {"label":":", "x":10.75, "y":3.5},
+ {"label":"\"", "x":11.75, "y":3.5},
+ {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
+ {"label":"4", "x":15.5, "y":3.5},
+ {"label":"5", "x":16.5, "y":3.5},
+ {"label":"6", "x":17.5, "y":3.5},
+ {"x":18.5, "y":3.5},
+ {"label":"Shift", "x":0, "y":4.5, "w":1.25},
+ {"x":1.25, "y":4.5},
+ {"label":"Z", "x":2.25, "y":4.5},
+ {"label":"X", "x":3.25, "y":4.5},
+ {"label":"C", "x":4.25, "y":4.5},
+ {"label":"V", "x":5.25, "y":4.5},
+ {"label":"B", "x":6.25, "y":4.5},
+ {"label":"N", "x":7.25, "y":4.5},
+ {"label":"M", "x":8.25, "y":4.5},
+ {"label":"<", "x":9.25, "y":4.5},
+ {"label":">", "x":10.25, "y":4.5},
+ {"label":"?", "x":11.25, "y":4.5},
+ {"label":"Shift", "x":12.25, "y":4.5, "w":1.75},
+ {"label":"1", "x":15.5, "y":4.5},
+ {"label":"2", "x":16.5, "y":4.5},
+ {"label":"3", "x":17.5, "y":4.5},
+ {"label":"Enter", "x":18.5, "y":4.5},
+ {"label":"\u2191", "x":14.25, "y":4.75},
+ {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+ {"label":"Win", "x":1.25, "y":5.5},
+ {"label":"Alt", "x":2.25, "y":5.5, "w":1.25},
+ {"x":3.5, "y":5.5, "w":6.25},
+ {"label":"Alt", "x":9.75, "y":5.5},
+ {"label":"Menu", "x":10.75, "y":5.5},
+ {"label":"Ctrl", "x":11.75, "y":5.5, "w":1.25},
+ {"label":"0", "x":16.5, "y":5.5},
+ {"label":".", "x":17.5, "y":5.5},
+ {"x":18.5, "y":5.5},
+ {"label":"\u2190", "x":13.25, "y":5.75},
+ {"label":"\u2193", "x":14.25, "y":5.75},
+ {"label":"\u2192", "x":15.25, "y":5.75}]
+ }
+ }
+}
+
diff --git a/keyboards/kbdfans/kbd19x/kbd19x.c b/keyboards/kbdfans/kbd19x/kbd19x.c
new file mode 100644
index 0000000000..360345600d
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/kbd19x.c
@@ -0,0 +1,63 @@
+/*
+Copyright 2018 Jeff Shufelt <jshuf@puppyfish.com> @jshuf
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "kbd19x.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+ kbd19x_nmlk_led_on();
+ } else {
+ kbd19x_nmlk_led_off();
+ }
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ kbd19x_caps_led_on();
+ } else {
+ kbd19x_caps_led_off();
+ }
+
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+ kbd19x_sclk_led_on();
+ } else {
+ kbd19x_sclk_led_off();
+ }
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/kbdfans/kbd19x/kbd19x.h b/keyboards/kbdfans/kbd19x/kbd19x.h
new file mode 100644
index 0000000000..728c7ca5ca
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/kbd19x.h
@@ -0,0 +1,103 @@
+/*
+Copyright 2018 Jeff Shufelt <jshuf@puppyfish.com> @jshuf
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KBD19X_H
+#define KBD19X_H
+
+#include "quantum.h"
+#include "led.h"
+
+inline void kbd19x_caps_led_on(void) { DDRB |= (1<<0); PORTB &= ~(1<<0); }
+inline void kbd19x_caps_led_off(void) { DDRB &= ~(1<<0); PORTB &= ~(1<<0); }
+
+inline void kbd19x_sclk_led_on(void) { DDRB |= (1<<1); PORTB &= ~(1<<1); }
+inline void kbd19x_sclk_led_off(void) { DDRB &= ~(1<<1); PORTB &= ~(1<<1); }
+
+inline void kbd19x_nmlk_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
+inline void kbd19x_nmlk_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+
+// readability
+#define XXX KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+// 2u backspace: XXX, k1e
+// split backspace: k1d, k1e
+
+// 2u numpad +: k2i, XXX
+// split numpad +: k2i, k3i
+
+// 2u numpad enter: k4i, XXX
+// split numpad enter: k4i, k5i
+
+// 2.25u lshift: k40, XXX
+// split (1.25u, 1u) lshift: k40, k41
+
+// ANSI enter or ISO enter: k3e
+// backslash or NUHS: k2e
+
+// left winkey: k50, k51, k52
+// left WKL: k50, XXX, k52
+
+// right winkey: k59, k5a, k5b
+// right WKL: k59, XXX, k5b
+
+#define LAYOUT_all( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, k0h, k0i, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, k1i, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, k2h, k2i, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, k3f, k3g, k3h, k3i, \
+ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4e, k4f, k4g, k4h, k4i, \
+ k50, k51, k52, k56, k59, k5a, k5b, k5d, k5e, k5f, k5g, k5h, k5i \
+)\
+{\
+ {k00, k01, k02, k03, k04, k09, k0a, k0b, k0c, k0f, k0g, k0h, k0i},\
+ {k10, k11, k12, k13, k14, k19, k1a, k1b, k1c, k1f, k1g, k1h, k1i},\
+ {k20, k21, k22, k23, k24, k29, k2a, k2b, k2c, k2f, k2g, k2h, k2i},\
+ {k30, k32, k33, k34, k35, k3a, k3b, k3c, k3e, k3f, k3g, k3h, k3i},\
+ {k40, k41, k42, k43, k44, k49, k4a, k4b, k4c, k4f, k4g, k4h, k4i},\
+ {k50, k51, k52, k5e, k5f, k59, k5a, k5b, k5d, k56, k5g, k5h, k5i},\
+ {k05, k06, k07, k08, k15, k16, k17, k18, k25, k26, k27, k28, k36},\
+ {k1d, k1e, k0e, k2e, k4e, k37, k38, k39, k45, k46, k47, k48, XXX},\
+}
+
+#define LAYOUT_ansi( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, k0h, k0i, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, k1f, k1g, k1h, k1i, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k2f, k2g, k2h, k2i, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, k3f, k3g, k3h, \
+ k40, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4e, k4f, k4g, k4h, k4i, \
+ k50, k51, k52, k56, k59, k5a, k5b, k5d, k5e, k5f, k5g, k5h \
+)\
+{\
+ {k00, k01, k02, k03, k04, k09, k0a, k0b, k0c, k0f, k0g, k0h, k0i},\
+ {k10, k11, k12, k13, k14, k19, k1a, k1b, k1c, k1f, k1g, k1h, k1i},\
+ {k20, k21, k22, k23, k24, k29, k2a, k2b, k2c, k2f, k2g, k2h, k2i},\
+ {k30, k32, k33, k34, k35, k3a, k3b, k3c, k3e, k3f, k3g, k3h, XXX},\
+ {k40, XXX, k42, k43, k44, k49, k4a, k4b, k4c, k4f, k4g, k4h, k4i},\
+ {k50, k51, k52, k5e, k5f, k59, k5a, k5b, k5d, k56, k5g, k5h, XXX},\
+ {k05, k06, k07, k08, k15, k16, k17, k18, k25, k26, k27, k28, k36},\
+ {XXX, k1e, k0e, k2e, k4e, k37, k38, k39, k45, k46, k47, k48, XXX},\
+}
+#endif
diff --git a/keyboards/kbdfans/kbd19x/keymaps/default/config.h b/keyboards/kbdfans/kbd19x/keymaps/default/config.h
new file mode 100644
index 0000000000..70028a525c
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/keymaps/default/config.h
@@ -0,0 +1,20 @@
+/*
+Copyright 2018 Jeff Shufelt <jshuf@puppyfish.com> @jshuf
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// place overrides here
diff --git a/keyboards/kbdfans/kbd19x/keymaps/default/keymap.c b/keyboards/kbdfans/kbd19x/keymaps/default/keymap.c
new file mode 100644
index 0000000000..c806072114
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/keymaps/default/keymap.c
@@ -0,0 +1,52 @@
+/*
+Copyright 2018 Jeff Shufelt <jshuf@puppyfish.com> @jshuf
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_ansi( /* Base */
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, BL_STEP, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGDN, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT \
+ ),
+ [1] = LAYOUT_ansi( /* Func */
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, \
+ _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+ ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd19x/keymaps/default/readme.md b/keyboards/kbdfans/kbd19x/keymaps/default/readme.md
new file mode 100644
index 0000000000..504a3ed02e
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/keymaps/default/readme.md
@@ -0,0 +1,13 @@
+# Default KBD19x Layout
+
+This is the default KBD19x layout, consisting of the base layer and the function layer. Backlighting and RGB controls are accessible on the function layer.
+
+**Base layer**
+
+![kbd19x default base layer](https://i.imgur.com/XhT980a.png)
+
+**Function layer**
+
+![kbd19x default function layer](https://i.imgur.com/3w3PXN2.png)
+
+
diff --git a/keyboards/kbdfans/kbd19x/readme.md b/keyboards/kbdfans/kbd19x/readme.md
new file mode 100644
index 0000000000..80b84b5f75
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/readme.md
@@ -0,0 +1,19 @@
+# KBD19x
+
+![kbd19x](https://i.imgur.com/0hWTEnh.jpg)
+
+**Layout possibilities for the KBD19x**
+
+![kbd19x](https://i.imgur.com/pVaR2zY.png)
+
+The KBD19x is a compact-1800 keyboard kit produced by KBDfans, offering a number of layout options.
+
+Keyboard Maintainer: [jshuf](https://github.com/jshuf)
+Hardware Supported: KBD19x PCB
+Hardware Availability: [KBDfans](https://kbdfans.cn)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbdfans/kbd19x:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd19x/rules.mk b/keyboards/kbdfans/kbd19x/rules.mk
new file mode 100644
index 0000000000..8e50962afa
--- /dev/null
+++ b/keyboards/kbdfans/kbd19x/rules.mk
@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
diff --git a/keyboards/kbdfans/kbd4x/config.h b/keyboards/kbdfans/kbd4x/config.h
new file mode 100644
index 0000000000..cac4ed95d1
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/config.h
@@ -0,0 +1,218 @@
+/*
+Copyright 2018 sevenseacat
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER KBDFans
+#define PRODUCT KBD4x
+#define DESCRIPTION A compact 40% (12x4) ortholinear keyboard kit.
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B3, B1, B0, D5, B7, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
diff --git a/keyboards/kbdfans/kbd4x/info.json b/keyboards/kbdfans/kbd4x/info.json
new file mode 100644
index 0000000000..f9952e7903
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/info.json
@@ -0,0 +1,112 @@
+{
+ "keyboard_name": "kbd4x",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 14,
+ "height": 4,
+ "layouts": {
+ "LAYOUT_planck_mit": {
+ "layout": [
+ {"label":"ESC", "x":0, "y":0},
+ {"label":"Q", "x":1, "y":0},
+ {"label":"W", "x":2, "y":0},
+ {"label":"E", "x":3, "y":0},
+ {"label":"R", "x":4, "y":0},
+ {"label":"T", "x":5, "y":0},
+ {"label":"Y", "x":6, "y":0},
+ {"label":"U", "x":7, "y":0},
+ {"label":"I", "x":8, "y":0},
+ {"label":"O", "x":9, "y":0},
+ {"label":"P", "x":10, "y":0},
+ {"label":"BKSP", "x":11, "y":0},
+ {"label":"TAB", "x":0, "y":1},
+ {"label":"A", "x":1, "y":1},
+ {"label":"S", "x":2, "y":1},
+ {"label":"D", "x":3, "y":1},
+ {"label":"F", "x":4, "y":1},
+ {"label":"G", "x":5, "y":1},
+ {"label":"H", "x":6, "y":1},
+ {"label":"J", "x":7, "y":1},
+ {"label":"K", "x":8, "y":1},
+ {"label":"L", "x":9, "y":1},
+ {"label":";", "x":10, "y":1},
+ {"label":"'", "x":11, "y":1},
+ {"label":"SHIFT", "x":0, "y":2},
+ {"label":"Z", "x":1, "y":2},
+ {"label":"X", "x":2, "y":2},
+ {"label":"C", "x":3, "y":2},
+ {"label":"V", "x":4, "y":2},
+ {"label":"B", "x":5, "y":2},
+ {"label":"N", "x":6, "y":2},
+ {"label":"M", "x":7, "y":2},
+ {"label":",", "x":8, "y":2},
+ {"label":".", "x":9, "y":2},
+ {"label":"UP", "x":10, "y":2},
+ {"label":"ENTER", "x":11, "y":2},
+ {"label":"LCTRL", "x":0, "y":3},
+ {"label":"LGUI", "x":1, "y":3},
+ {"label":"1", "x":2, "y":3},
+ {"label":"2", "x":3, "y":3},
+ {"label":"3", "x":4, "y":3},
+ {"label":"SPACE", "x":5, "y":3, "w":2},
+ {"label":"MO(1)", "x":7, "y":3},
+ {"label":"/", "x":8, "y":3},
+ {"label":"LEFT", "x":9, "y":3},
+ {"label":"DOWN", "x":10, "y":3},
+ {"label":"RIGHT", "x":11, "y":3}
+ ]
+ },
+ "LAYOUT_ortho_4x12": {
+ "layout": [
+ {"label":"ESC", "x":0, "y":0},
+ {"label":"Q", "x":1, "y":0},
+ {"label":"W", "x":2, "y":0},
+ {"label":"E", "x":3, "y":0},
+ {"label":"R", "x":4, "y":0},
+ {"label":"T", "x":5, "y":0},
+ {"label":"Y", "x":6, "y":0},
+ {"label":"U", "x":7, "y":0},
+ {"label":"I", "x":8, "y":0},
+ {"label":"O", "x":9, "y":0},
+ {"label":"P", "x":10, "y":0},
+ {"label":"BKSP", "x":11, "y":0},
+ {"label":"TAB", "x":0, "y":1},
+ {"label":"A", "x":1, "y":1},
+ {"label":"S", "x":2, "y":1},
+ {"label":"D", "x":3, "y":1},
+ {"label":"F", "x":4, "y":1},
+ {"label":"G", "x":5, "y":1},
+ {"label":"H", "x":6, "y":1},
+ {"label":"J", "x":7, "y":1},
+ {"label":"K", "x":8, "y":1},
+ {"label":"L", "x":9, "y":1},
+ {"label":";", "x":10, "y":1},
+ {"label":"'", "x":11, "y":1},
+ {"label":"SHIFT", "x":0, "y":2},
+ {"label":"Z", "x":1, "y":2},
+ {"label":"X", "x":2, "y":2},
+ {"label":"C", "x":3, "y":2},
+ {"label":"V", "x":4, "y":2},
+ {"label":"B", "x":5, "y":2},
+ {"label":"N", "x":6, "y":2},
+ {"label":"M", "x":7, "y":2},
+ {"label":",", "x":8, "y":2},
+ {"label":".", "x":9, "y":2},
+ {"label":"UP", "x":10, "y":2},
+ {"label":"ENTER", "x":11, "y":2},
+ {"label":"LCTRL", "x":0, "y":3},
+ {"label":"LGUI", "x":1, "y":3},
+ {"label":"1", "x":2, "y":3},
+ {"label":"2", "x":3, "y":3},
+ {"label":"3", "x":4, "y":3},
+ {"label":"SPACE", "x":5, "y":3},
+ {"label":"MO(2)", "x":6, "y":3},
+ {"label":"MO(1)", "x":7, "y":3},
+ {"label":"/", "x":8, "y":3},
+ {"label":"LEFT", "x":9, "y":3},
+ {"label":"DOWN", "x":10, "y":3},
+ {"label":"RIGHT", "x":11, "y":3}
+ ]
+ }
+ }
+}
diff --git a/keyboards/kbdfans/kbd4x/kbd4x.c b/keyboards/kbdfans/kbd4x/kbd4x.c
new file mode 100644
index 0000000000..84ada250d7
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/kbd4x.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 sevenseacat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kbd4x.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/kbdfans/kbd4x/kbd4x.h b/keyboards/kbdfans/kbd4x/kbd4x.h
new file mode 100644
index 0000000000..d7a851e3eb
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/kbd4x.h
@@ -0,0 +1,48 @@
+/* Copyright 2018 sevenseacat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KBD4X_H
+#define KBD4X_H
+
+#include "quantum.h"
+
+#define LAYOUT_planck_mit( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+ k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+ { k30, k31, k32, k33, k34, k35, KC_NO, k37, k38, k39, k3a, k3b } \
+}
+
+// The PCB does support a grid layout, but the case does not.
+#define LAYOUT_ortho_4x12( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
+}
+
+#endif
diff --git a/keyboards/kbdfans/kbd4x/keymaps/default/config.h b/keyboards/kbdfans/kbd4x/keymaps/default/config.h
new file mode 100644
index 0000000000..7f3bd7dd52
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2018 sevenseacat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
diff --git a/keyboards/kbdfans/kbd4x/keymaps/default/keymap.c b/keyboards/kbdfans/kbd4x/keymaps/default/keymap.c
new file mode 100644
index 0000000000..ad49b37998
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/keymaps/default/keymap.c
@@ -0,0 +1,52 @@
+/* Copyright 2018 sevenseacat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define ___ KC_TRNS
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ KBD4X = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT_planck_mit(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENTER,
+ KC_LCTL, KC_LGUI, KC_1, KC_2, KC_3, KC_SPACE, MO(1), KC_SLSH, KC_LEFT, KC_DOWN, KC_RIGHT
+ ),
+
+ [1] = LAYOUT_planck_mit(
+ KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, ___,
+ ___, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, ___, ___, ___, ___, ___, ___, RESET,
+ ___, BL_TOGG, BL_STEP, ___, ___, ___, ___, ___, ___, ___, ___, ___,
+ ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___
+ ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+void led_set_user(uint8_t usb_led) {
+}
diff --git a/keyboards/kbdfans/kbd4x/keymaps/default/readme.md b/keyboards/kbdfans/kbd4x/keymaps/default/readme.md
new file mode 100644
index 0000000000..a950a25ace
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for kbd4x
diff --git a/keyboards/kbdfans/kbd4x/readme.md b/keyboards/kbdfans/kbd4x/readme.md
new file mode 100644
index 0000000000..2e2a29290f
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/readme.md
@@ -0,0 +1,15 @@
+# KBD4x
+
+![KBD4x](https://cdn.shopify.com/s/files/1/1473/3902/products/1_ef8d3ad0-fc70-4d4f-9e36-8438c781a581_1800x1800.jpg)
+
+A compact 40% (12x4) ortholinear keyboard kit sold by KBDFans.
+
+Keyboard Maintainer: ![sevenseacat](https://github.com/sevenseacat)
+Hardware Supported: KBD4x PCB
+Hardware Availability: https://kbdfans.cn/collections/diy-kit/products/kbd4x-custom-mechanical-keyboard-hot-swap-diy-kit
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbdfans/kbd4x:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd4x/rules.mk b/keyboards/kbdfans/kbd4x/rules.mk
new file mode 100644
index 0000000000..6cfd92bc63
--- /dev/null
+++ b/keyboards/kbdfans/kbd4x/rules.mk
@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
diff --git a/keyboards/kbdfans/kbd66/config.h b/keyboards/kbdfans/kbd66/config.h
new file mode 100644
index 0000000000..f9990c0e4f
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/config.h
@@ -0,0 +1,185 @@
+/*
+Copyright 2018 Alex Peters
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xBD66
+#define DEVICE_VER 0x0001
+#define MANUFACTURER KBDFans
+#define PRODUCT KBD66
+#define DESCRIPTION QMK keyboard firmware for KBD66
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, B1, F0, F1, D4 } // From qmkeyboard.cn
+#define MATRIX_COL_PINS { C6, C7, E2, F5, F6, F4, D3, D2, D5, D0, D1, B4, D7, D6, E6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif
diff --git a/keyboards/kbdfans/kbd66/info.json b/keyboards/kbdfans/kbd66/info.json
new file mode 100644
index 0000000000..0308bfab7a
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/info.json
@@ -0,0 +1,13 @@
+{
+ "keyboard_name": "KBD66",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 16.5,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "key_count": 70,
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.25}, {"x":13.5, "y":3}, {"x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":2.75}, {"x":6.75, "y":4, "w":2.75}, {"label":"Alt", "x":9.5, "y":4, "w":1.5}, {"label":"Win", "x":11, "y":4, "w":1.25}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}]
+ }
+ }
+}
diff --git a/keyboards/kbdfans/kbd66/kbd66.c b/keyboards/kbdfans/kbd66/kbd66.c
new file mode 100644
index 0000000000..7a84b63684
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/kbd66.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kbd66.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/kbdfans/kbd66/kbd66.h b/keyboards/kbdfans/kbd66/kbd66.h
new file mode 100644
index 0000000000..6a4b99ec42
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/kbd66.h
@@ -0,0 +1,36 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KBD66_H
+#define KBD66_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+#define LAYOUT_all( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,k0E, k0F, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
+ k40, k41, k42, k45, k48, k4A, k4B, k4C, k4D, k4E, k4F \
+) { \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F}, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F}, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, KC_NO, KC_NO}, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, KC_NO}, \
+ { k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E, k4F}, \
+}
+
+#endif
diff --git a/keyboards/kbdfans/kbd66/keymaps/ansi/config.h b/keyboards/kbdfans/kbd66/keymaps/ansi/config.h
new file mode 100644
index 0000000000..c7b3d6ecc3
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/ansi/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/kbdfans/kbd66/keymaps/ansi/keymap.c b/keyboards/kbdfans/kbd66/keymaps/ansi/keymap.c
new file mode 100644
index 0000000000..d73e5aec8a
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/ansi/keymap.c
@@ -0,0 +1,99 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _____ KC_TRNS
+#define XXXXX KC_NO
+#define _L0 0
+#define _L1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Layer 0
+ * ,-----------------------------------------------------------. ,---.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BckSp | |INS|
+ * |-----------------------------------------------------------| |---|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |DEL|
+ * |-----------------------------------------------------------| `---'
+ * |Cap | A| S| D| F| G| H| J| K| L| ;| '| Enter |
+ * |---------------------------------------------------------------.
+ * | Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | UP|
+ * |-------------------------------------------------------------------.
+ * |Ctl |OS |Alt | Space |Alt | Fn |Ctl |LFT|DWN|RIG|
+ * `-------------------------------------------------------------------'
+ */
+[_L0] = LAYOUT_all(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXX, KC_BSPC, KC_INS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, XXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, XXXXX, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, MO(_L1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+ /* Layer 1
+ * ,-----------------------------------------------------------. ,---.
+ * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | |HOM|
+ * |-----------------------------------------------------------| |---|
+ * | | | | | | | | | | |PSc|VDn|VUp| Mute| |END|
+ * |-----------------------------------------------------------| `---'
+ * |RESET| | | | | | |PRV|PLY|NXT|STP| | |
+ * |---------------------------------------------------------------.
+ * | | | | | | | | |BLB|BLC|Slp| |PUp|
+ * |-------------------------------------------------------------------.
+ * | | | | | | | | |PDn|SLk|
+ * `-------------------------------------------------------------------'
+ */
+[_L1] = LAYOUT_all(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _____, _____, KC_HOME,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PSCR, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,
+ RESET, _____, _____, _____, _____, _____, _____, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, _____, _____,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, BL_BRTG, BL_STEP, KC_SLEP, _____, _____, KC_PGUP,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PGDN, KC_SLCK
+)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd66/keymaps/ansi/readme.md b/keyboards/kbdfans/kbd66/keymaps/ansi/readme.md
new file mode 100644
index 0000000000..6ad0d85e08
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/ansi/readme.md
@@ -0,0 +1,11 @@
+# ANSI keymap for KBD66
+
+![KBD66 Layout Image](https://i.imgur.com/Hmt5QDW.jpg)
+
+Your standard ANSI layout for the KBD66.
+Cycle backlight: Fn + .
+Backlight breathing: Fn + ,
+Volume Up/Down: Fn + [ and Fn + ]
+Mute: Fn + \
+Sleep: Fn + /
+Bootloader Mode: Fn + CapsLock \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd66/keymaps/default/config.h b/keyboards/kbdfans/kbd66/keymaps/default/config.h
new file mode 100644
index 0000000000..c7b3d6ecc3
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/default/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/kbdfans/kbd66/keymaps/default/keymap.c b/keyboards/kbdfans/kbd66/keymaps/default/keymap.c
new file mode 100644
index 0000000000..a969d65101
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/default/keymap.c
@@ -0,0 +1,99 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _____ KC_TRNS
+#define XXXXX KC_NO
+#define _L0 0
+#define _L1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Layer 0
+ * ,-----------------------------------------------------------. ,---.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `| BS| |INS|
+ * |-----------------------------------------------------------| |---|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |DEL|
+ * |-----------------------------------------------------------| `---'
+ * |Cap | A| S| D| F| G| H| J| K| L| ;| '| Enter |
+ * |---------------------------------------------------------------.
+ * |Shft| `| Z| X| C| V| B| N| M| ,| .| /| Shft |Fn | UP|
+ * |-------------------------------------------------------------------.
+ * |Ctl |OS |Alt | Space |Alt | Fn |Ctl |LFT|DWN|RIG|
+ * `-------------------------------------------------------------------'
+ */
+[_L0] = LAYOUT_all(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_L1), KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, MO(_L1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+ /* Layer 1
+ * ,-----------------------------------------------------------. ,---.
+ * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | |HOM|
+ * |-----------------------------------------------------------| |---|
+ * | | | | | | | | | | |PSc|VDn|VUp| Mute| |END|
+ * |-----------------------------------------------------------| `---'
+ * |RESET| | | | | | |PRV|PLY|NXT|STP| | |
+ * |---------------------------------------------------------------.
+ * | | | | | | | | | |BLB|BLC|Slp| | |PUp|
+ * |-------------------------------------------------------------------.
+ * | | | | | | | | |PDn|SLk|
+ * `-------------------------------------------------------------------'
+ */
+[_L1] = LAYOUT_all(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _____, _____, KC_HOME,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PSCR, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,
+ RESET, _____, _____, _____, _____, _____, _____, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, _____, _____,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, BL_BRTG, BL_STEP, KC_SLEP, _____, _____, KC_PGUP,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PGDN, KC_SLCK
+)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd66/keymaps/default/readme.md b/keyboards/kbdfans/kbd66/keymaps/default/readme.md
new file mode 100644
index 0000000000..f4ab771a5d
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/default/readme.md
@@ -0,0 +1,12 @@
+# The default keymap for KBD66
+
+![KBD66 Layout Image](https://i.imgur.com/QNpHnMe.jpg)
+
+This is a fairly universal layout that supports standard ANSI, split backspace,
+split left shift, and split right shift.
+Cycle backlight: Fn + .
+Backlight breathing: Fn + ,
+Volume Up/Down: Fn + [ and Fn + ]
+Mute: Fn + \
+Sleep: Fn + /
+Bootloader Mode: Fn + CapsLock \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd66/keymaps/iso/config.h b/keyboards/kbdfans/kbd66/keymaps/iso/config.h
new file mode 100644
index 0000000000..c7b3d6ecc3
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/iso/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/kbdfans/kbd66/keymaps/iso/keymap.c b/keyboards/kbdfans/kbd66/keymaps/iso/keymap.c
new file mode 100644
index 0000000000..5ee64e3522
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/iso/keymap.c
@@ -0,0 +1,99 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _____ KC_TRNS
+#define XXXXX KC_NO
+#define _L0 0
+#define _L1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Layer 0
+ * ,-----------------------------------------------------------. ,---.
+ * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BckSp | |INS|
+ * |-----------------------------------------------------------| |---|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | |DEL|
+ * |------------------------------------------------------|Ent | `---'
+ * |Cap | A| S| D| F| G| H| J| K| L| ;| '| #| |
+ * |---------------------------------------------------------------.
+ * |Shft| \| Z| X| C| V| B| N| M| ,| .| /| Shft |Fn | UP|
+ * |-------------------------------------------------------------------.
+ * |Ctl |OS |Alt | Space |Alt | Fn |Ctl |LFT|DWN|RIG|
+ * `-------------------------------------------------------------------'
+ */
+[_L0] = LAYOUT_all(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NUHS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_L1), KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, MO(_L1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+ /* Layer 1
+ * ,-----------------------------------------------------------. ,---.
+ * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | |HOM|
+ * |-----------------------------------------------------------| |---|
+ * | | | | | | | | | | |PSc|VDn|VUp| | |END|
+ * |------------------------------------------------------| | `---'
+ * |RESET | | | | | | |PRV|PLY|NXT|STP| |Mut| |
+ * |---------------------------------------------------------------.
+ * | | | | | | | | | |BLB|BLC|Slp| | |PUp|
+ * |-------------------------------------------------------------------.
+ * | | | | | | | | |PDn|SLk|
+ * `-------------------------------------------------------------------'
+ */
+[_L1] = LAYOUT_all(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _____, _____, KC_HOME,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PSCR, KC_VOLD, KC_VOLU, KC_MUTE, KC_END,
+ RESET, _____, _____, _____, _____, _____, _____, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, _____, _____,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, BL_BRTG, BL_STEP, KC_SLEP, _____, _____, KC_PGUP,
+ _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PGDN, KC_SLCK
+)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd66/keymaps/iso/readme.md b/keyboards/kbdfans/kbd66/keymaps/iso/readme.md
new file mode 100644
index 0000000000..f325b741cc
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/iso/readme.md
@@ -0,0 +1,11 @@
+# ISO keymap for KBD66
+
+![KBD66 Layout Image](https://i.imgur.com/q6GTOsb.jpg)
+
+Standard ISO layout for KBD66.
+Cycle backlight: Fn + .
+Backlight breathing: Fn + ,
+Volume Up/Down: Fn + [ and Fn + ]
+Mute: Fn + #
+Sleep: Fn + /
+Bootloader Mode: Fn + CapsLock \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd66/keymaps/maartenwut/config.h b/keyboards/kbdfans/kbd66/keymaps/maartenwut/config.h
new file mode 100755
index 0000000000..c7b3d6ecc3
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/maartenwut/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Alex Peters
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/kbdfans/kbd66/keymaps/maartenwut/keymap.c b/keyboards/kbdfans/kbd66/keymaps/maartenwut/keymap.c
new file mode 100755
index 0000000000..daeb934778
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/maartenwut/keymap.c
@@ -0,0 +1,62 @@
+#include QMK_KEYBOARD_H
+
+#define _MA 0
+#define _GA 1
+#define _FL 2
+#define _AR 3
+
+#define TRNS KC_TRNS
+#define ______ KC_NO
+#define trigger_time 400
+
+#define LSHIFT OSM(MOD_LSFT)
+#define SPACE LT(_AR, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// Main Layer
+[_MA] = LAYOUT_all(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, ______, KC_BSPC, KC_MPLY,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ LSHIFT, TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TRNS, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, SPACE, SPACE, KC_RALT, KC_RCTRL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+//Function Layer
+[_FL] = LAYOUT_all(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TRNS, RESET, KC_PSCR,
+ TRNS, ______, ______, ______, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, ______,
+ TRNS, ______, ______, ______, TRNS, TG(_GA), TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_VOLD, KC_VOLU, KC_MUTE, TRNS, TRNS, KC_PGUP,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, ______, KC_PGDN, ______),
+
+//Arrow keys layer (space bar)
+[_AR] = LAYOUT_all(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
+
+//Game layer (fn + g)
+[_GA] = LAYOUT_all(
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ KC_LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, KC_SPC, KC_SPC, TRNS, TRNS, MO(_FL), TRNS, TRNS, TRNS),
+};
+
+void matrix_init_user() {
+ //Set led port to output
+ DDRB |= (1<<2);
+}
+
+void led_set_user(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ PORTB &= ~(1<<2);
+ } else {
+ // Turn capslock off
+ PORTB |= (1<<2);
+ }
+}
diff --git a/keyboards/kbdfans/kbd66/keymaps/maartenwut/readme.md b/keyboards/kbdfans/kbd66/keymaps/maartenwut/readme.md
new file mode 100755
index 0000000000..24be72c014
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/keymaps/maartenwut/readme.md
@@ -0,0 +1,3 @@
+# Maartenwut's KBD66 layout
+
+This is Maartenwut's layout, which is really similar to Maartenwut's Tada68 layout. \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd66/readme.md b/keyboards/kbdfans/kbd66/readme.md
new file mode 100644
index 0000000000..a2e5de0157
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/readme.md
@@ -0,0 +1,15 @@
+# KBD66
+
+![KBD66](https://i.imgur.com/qtLuL2o.jpg)
+
+A 65% keyboard from KBDFans.
+
+Keyboard Maintainer: [Alex](https://github.com/allo-world)
+Hardware Supported: KBD66, ATmega32U4
+Hardware Availability: [KBDFans](https://kbdfans.cn), [Massdrop](https://www.massdrop.com/buy/kbd66-mechanical-keyboard-kit?mode=guest_open)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbdfans/kbd66:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd66/rules.mk b/keyboards/kbdfans/kbd66/rules.mk
new file mode 100644
index 0000000000..dcc9b5bbd6
--- /dev/null
+++ b/keyboards/kbdfans/kbd66/rules.mk
@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
diff --git a/keyboards/kbdfans/kbd67/hotswap/config.h b/keyboards/kbdfans/kbd67/hotswap/config.h
new file mode 100644
index 0000000000..f54ffa1cac
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/config.h
@@ -0,0 +1,240 @@
+/*
+Copyright 2019 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER KBDFans
+#define PRODUCT KBD67 Hotswap
+#define DESCRIPTION A custom 65% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
+#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, E6, D1, D0, D2, D3, D5, D6, D7, C6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN B4
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 8
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kbdfans/kbd67/hotswap/hotswap.c b/keyboards/kbdfans/kbd67/hotswap/hotswap.c
new file mode 100644
index 0000000000..e6999f6af2
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/hotswap.c
@@ -0,0 +1,43 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "hotswap.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/kbdfans/kbd67/hotswap/hotswap.h b/keyboards/kbdfans/kbd67/hotswap/hotswap.h
new file mode 100644
index 0000000000..57220050b6
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/hotswap.h
@@ -0,0 +1,43 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \
+ K40, K41, K42, K45, K49, K4A, K4B, K4D, K4E \
+) \
+{ \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E}, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E}, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E}, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, K3D, K3E}, \
+ { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, KC_NO, K4D, K4E}, \
+}
+
diff --git a/keyboards/kbdfans/kbd67/hotswap/info.json b/keyboards/kbdfans/kbd67/hotswap/info.json
new file mode 100644
index 0000000000..9f23a5f348
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/info.json
@@ -0,0 +1,12 @@
+{
+ "keyboard_name": "kbd67 hotswap",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+ }
+ }
+} \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/default/config.h b/keyboards/kbdfans/kbd67/hotswap/keymaps/default/config.h
new file mode 100644
index 0000000000..26c6d6ade1
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/default/keymap.c b/keyboards/kbdfans/kbd67/hotswap/keymaps/default/keymap.c
new file mode 100644
index 0000000000..5369630116
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/default/keymap.c
@@ -0,0 +1,72 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ QMKBEST = SAFE_RANGE,
+ QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
+
+[1] = LAYOUT(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QMKBEST:
+ if (record->event.pressed) {
+ // when keycode QMKBEST is pressed
+ SEND_STRING("QMK is the best thing ever!");
+ } else {
+ // when keycode QMKBEST is released
+ }
+ break;
+ case QMKURL:
+ if (record->event.pressed) {
+ // when keycode QMKURL is pressed
+ SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+ } else {
+ // when keycode QMKURL is released
+ }
+ break;
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/default/readme.md b/keyboards/kbdfans/kbd67/hotswap/keymaps/default/readme.md
new file mode 100644
index 0000000000..7e681294f2
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for hotswap
diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/config.h b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/config.h
new file mode 100644
index 0000000000..cc06440e0d
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/config.h
@@ -0,0 +1,22 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// Enable cmd-option-escape on mac.
+#define GRAVE_ESC_ALT_OVERRIDE
+
+// place overrides here
diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/keymap.c b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/keymap.c
new file mode 100644
index 0000000000..0d542bf843
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/keymap.c
@@ -0,0 +1,176 @@
+/* Copyright 2019 Yonatan Zunger
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum custom_keycodes {
+ // Use this instead of RALT, so we can use it to switch layers but not trigger other alt-related
+ // behavior (like GRAVE_ESC_ALT_OVERRIDE).
+ MAGIC = SAFE_RANGE,
+};
+
+enum layers_keymap {
+ _QWERTY = 0,
+ _FUNCTION,
+
+ _MAGIC,
+ _SHIFTMAGIC,
+};
+
+// This is so that H(xxxx) has the same width as _______, which makes the grids more legible.
+#define H(x) UC(0x##x)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap (Base Layer) Default Layer
+ * ,----------------------------------------------------------------.
+ * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Del|Brk|Home|
+ * |----------------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |End |
+ * |----------------------------------------------------------------|
+ * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp|
+ * |----------------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn|
+ * |----------------------------------------------------------------|
+ * |Ctrl|Alt |Win | Space |Alt| FN |||||Lef|Dow|Rig |
+ * `----------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BRK, KC_HOME, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \
+ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, MAGIC, MO(_FUNCTION), KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap Fn Layer. Blank keys are deliberately NO, not TRNS.
+ * ,----------------------------------------------------------------.
+ * |Rst |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|F13|PSc|PAUS|
+ * |----------------------------------------------------------------|
+ * |Debug| | | | | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * |Ctrl | |Vo+| | | | | | | | | | | |
+ * |----------------------------------------------------------------|
+ * |Shift |REV|Vo-|FWD| | | | | | | | McL|MsU|McR |
+ * |----------------------------------------------------------------|
+ * |Ctrl|Alt |Win | |Alt| |||||MsL|MsD|MsR |
+ * `----------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_MPLY, \
+ DEBUG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, _______, \
+ _______, KC_NO, KC__VOLUP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+ _______, KC_MRWD, KC__VOLDOWN, KC_MFFD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN1, KC_MS_U, KC_BTN2, \
+ _______, _______, _______, KC_NO, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R),
+
+ /* Mathematical lower layer. Blank keys are TRNS.
+ * Note that escape turns into grave here. This doesn't just generalize GRAVE_ESC; it means that
+ * magic+esc is a way to create backticks without a dedicated key.
+ * ,----------------------------------------------------------------.
+ * | ` | ¹| ² | ³ | ⁴ | ⁵ | ⁶ | ⁷ | ⁸ | ⁹ | ⁰ | ⁻ | ⁺ | ⊕ | ≠ | √ |
+ * |----------------------------------------------------------------|
+ * | | ± | ω | ε | ρ | τ | θ | υ | ι | ο | π | ∃ | ∀ | ℚ | ℝ |
+ * |----------------------------------------------------------------|
+ * | | α | σ | δ | φ | γ | η | ∅ | κ | λ | ∨ | ∧ | | ℕ |
+ * |----------------------------------------------------------------|
+ * | | ζ | ξ | χ | ψ | β | ν | μ | ≲ | ≳ | ∈ | | ↑ | ↔ |
+ * |----------------------------------------------------------------|
+ * | | | | | | ||||| ← | ↓ | → |
+ * `----------------------------------------------------------------'
+ */
+[_MAGIC] = LAYOUT(
+ KC_GRV, H(00b9), H(00b2), H(00b3), H(2074), H(2075), H(2076), H(2077), H(2078), H(2079), H(2070), H(207b), H(207a), H(2295), H(2260), H(221a), \
+ _______, H(00b1), H(03c9), H(03b5), H(03c1), H(03c4), H(03b8), H(03c5), H(03b9), H(03bf), H(03c0), H(2203), H(2200), H(211a), H(211d), \
+ _______, H(03b1), H(03c3), H(03b4), H(03c6), H(03b3), H(03b7), H(2205), H(03ba), H(03bb), H(2228), H(2227), _______, H(2115), \
+ _______, H(03b6), H(03be), H(03c7), H(03c8), H(03b2), H(03bd), H(03bc), H(2272), H(2273), H(2208), _______, H(2191), H(2194), \
+ _______, _______, _______, _______, _______, _______, H(2190), H(2193), H(2192)),
+
+ /* Mathematical upper layer. Blank keys are TRNS.
+ * ,----------------------------------------------------------------.
+ * | ` | ₁| ₂ | ₃ | ₄ | ₅ | ₆ | ₇ | ₈ | ₉ | ₀ | ₋ | ₊ | ⊗ | ≈ | ∂ |
+ * |----------------------------------------------------------------|
+ * | | ∓ | Ω | Ε | Ρ | Τ | Θ | Υ | Ι | Ο | Π | ∄ | ∞ | ⊙ | ℂ |
+ * |----------------------------------------------------------------|
+ * | | Α | Σ | Δ | Φ | Γ | Η | ¬ | Κ | Λ | ∪ | ∩ | | ℤ |
+ * |----------------------------------------------------------------|
+ * | | Ζ | Ξ | Χ | Ψ | Β | Ν | Μ | ⊆ | ⊇ | ∉ | | ⇑ | ⇔ |
+ * |----------------------------------------------------------------|
+ * | | | | | | ||||| ⇐ | ⇓ | ⇒ |
+ * `----------------------------------------------------------------'
+ */
+[_SHIFTMAGIC] = LAYOUT(
+ KC_GRV, H(2081), H(2082), H(2083), H(2084), H(2085), H(2086), H(2087), H(2088), H(2089), H(2080), H(208b), H(208a), H(2297), H(2248), H(2202), \
+ _______, H(2213), H(03a9), H(0395), H(03a1), H(03a4), H(0398), H(03a5), H(0399), H(039f), H(03a0), H(2204), H(221e), H(2299), H(2102), \
+ _______, H(0391), H(03a3), H(0394), H(03a6), H(0393), H(0397), H(00ac), H(039a), H(039b), H(222a), H(2229), _______, H(2124), \
+ _______, H(0396), H(039e), H(03a7), H(03a8), H(0392), H(039d), H(039c), H(2286), H(2287), H(2209), _______, H(21d1), H(21d4), \
+ _______, _______, _______, _______, _______, _______, H(21d0), H(21d3), H(21d2)),
+};
+
+// Layer bitfields.
+#define MAGIC_LAYER (1UL << _MAGIC)
+#define SHIFTMAGIC_LAYER (1UL << _SHIFTMAGIC)
+// The layers we don't touch.
+#define LAYER_MASK ~(MAGIC_LAYER|SHIFTMAGIC_LAYER)
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ // Activate the appropriate magic layer:
+ // User is holding AltGr+Shift => _SHIFTMAGIC
+ // User is holding AltGr => _MAGIC
+ // Not holding AltGr => None
+ // We do this the efficient way, by grabbing the non-magic bits from the current layer bitmap,
+ // setting the appropriate magic or shiftmagic bit, and doing an absolute layer set. (Layer
+ // sets are nontrivial, so we don't want to do extras!)
+
+ // We track shift and AltGr state on our own, because this function is called before get_mods is
+ // updated!
+ static bool shifted = false;
+ static bool magic = false;
+
+ if (keycode == KC_LSHIFT || keycode == KC_RSHIFT) {
+ shifted = record->event.pressed;
+ } else if (keycode == MAGIC) {
+ magic = record->event.pressed;
+ } else if (keycode == RESET) {
+ // Safe reset: Only actually let this keycode through if shift is held as well. Since there's no
+ // right-shift in the function layer, this means that reset is Fn+LShift+Esc, something you're
+ // not likely to hit by accident. (Especially since AltGr+Esc is backtick!)
+ return (record->event.pressed && shifted);
+ }
+
+ // Update the layer.
+ uint32_t new_layer_state = layer_state & LAYER_MASK;
+ if (magic) {
+ new_layer_state |= (shifted ? SHIFTMAGIC_LAYER : MAGIC_LAYER);
+ }
+ if (layer_state != new_layer_state) {
+ layer_state_set(new_layer_state);
+ }
+
+ return true;
+}
+
+void eeconfig_init_user(void) {
+ set_unicode_input_mode(UC_OSX);
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/readme.md b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/readme.md
new file mode 100644
index 0000000000..923a4824a5
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/readme.md
@@ -0,0 +1,27 @@
+* Custom keymap for kbd67, for those who need to both code and type math.
+* Author: Yonatan Zunger (zunger@gmail.com)
+
+This keymap is presently rather Mac-centric, as it uses Mac media keys in its function layer and the
+OS X Unicode input mode for the "magic" layers.
+
+*Layer 0 (Base QWERTY):* The layout has a few minor quirks: grave escape, Home/End/PgUp/PgDn in the
+right-hand column (rather than the more common Home/PgUp/PgDn/End), and a pause key between
+backspace and home -- this being something I use for screen lock, a necessity when one works with
+and sits next to security engineers. (Using a heavier switch on the pause key greatly reduces the
+risk of accidental triggering) In OS X style, alt and win are swapped on the left-hand side.
+
+The right-hand alt and gui keys take on a different meaning: right-alt lives up to its old name of
+AltGr by invoking Greek (the "magic" layers, 2 and 3), and right-gui invokes the function layer.
+
+*Layer 1 (Functions):* This layer deliberately sets KC_NO for the keys it doesn't use. I realize
+this isn't common, but I like to keep my functions quite distinct from all other layers.
+
+RESET can be accessed at Fn+Left Shift+Escape.
+
+*Layers 2 and 3*: These are invoked by the "magic" key (AltGr) and by magic+shift. The
+letters mostly produce Greek; the numbers, superscripts (magic) and subscripts (magic+shift); and
+the various other keys, mathematical symbols. There unfortunately aren't nearly enough keys for all
+the symbols I'd like, so magic+alt and magic+alt+shift may end up existing as well, giving this a
+proper Space Cadet effect; but that said, it's going to be hard to remember where all these symbols
+are without some extremely custom keycaps. In the limit of arbitrarily complex layers, the keyboard
+will probably start running LISP and turn into EMACS.
diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/rules.mk b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/rules.mk
new file mode 100644
index 0000000000..a61cfa33fa
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/zunger/rules.mk
@@ -0,0 +1,2 @@
+# You need Unicode for this map.
+UNICODE_ENABLE = yes # Unicode
diff --git a/keyboards/kbdfans/kbd67/hotswap/readme.md b/keyboards/kbdfans/kbd67/hotswap/readme.md
new file mode 100644
index 0000000000..6b40705932
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/readme.md
@@ -0,0 +1,13 @@
+# hotswap
+
+A 65% hot swap board with blocker and USB Type C port.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+Hardware Supported: KBD67 Hotswap
+Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbd67/hotswap:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd67/hotswap/rules.mk b/keyboards/kbdfans/kbd67/hotswap/rules.mk
new file mode 100644
index 0000000000..f8667d280f
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/hotswap/rules.mk
@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
diff --git a/keyboards/kbdfans/kbd67/readme.md b/keyboards/kbdfans/kbd67/readme.md
new file mode 100644
index 0000000000..7ee3c6adbb
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/readme.md
@@ -0,0 +1,15 @@
+# KBD67
+
+A 65% keyboard sold in two variants. Rev1 was a typical keyboard that had to be soldered together, supporting multiple layouts.
+Months later, a new version with hotswap was sold. **Firmware files from one, will not work on the other.** Please use the `.hex` appropriate for your board.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+Hardware Supported: KBD67
+Hardware Availability: KBDFans
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbdfans/kbd67/rev1:default
+ make kbdfans/kbd67/hotswap:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd67/rev1/config.h b/keyboards/kbdfans/kbd67/rev1/config.h
new file mode 100644
index 0000000000..2a1e558ab3
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/config.h
@@ -0,0 +1,235 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER kbdfans
+#define PRODUCT kbd67
+#define DESCRIPTION 65% Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 20
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 180 /* The maximum brightness level */
+ // #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+ #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+ // #define RGBLIGHT_EFFECT_BREATHING
+ // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+ // #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ // #define RGBLIGHT_EFFECT_SNAKE
+ // #define RGBLIGHT_EFFECT_KNIGHT
+ // #define RGBLIGHT_EFFECT_CHRISTMAS
+ // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+ // #define RGBLIGHT_EFFECT_RGB_TEST
+ // #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kbdfans/kbd67/rev1/info.json b/keyboards/kbdfans/kbd67/rev1/info.json
new file mode 100644
index 0000000000..70a926a7f1
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/info.json
@@ -0,0 +1,16 @@
+{
+ "keyboard_name": "kbd67",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+ },
+
+ "LAYOUT_65_ansi": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+ }
+ }
+}
diff --git a/keyboards/kbdfans/kbd67/rev1/keymaps/default/config.h b/keyboards/kbdfans/kbd67/rev1/keymaps/default/config.h
new file mode 100644
index 0000000000..a3ed4f762a
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
diff --git a/keyboards/kbdfans/kbd67/rev1/keymaps/default/keymap.c b/keyboards/kbdfans/kbd67/rev1/keymaps/default/keymap.c
new file mode 100644
index 0000000000..89fa9a534d
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/keymaps/default/keymap.c
@@ -0,0 +1,99 @@
+/* Copyright 2018 'mechmerlin'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ QMKBEST = SAFE_RANGE,
+ QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap (Base Layer) Default Layer
+ * ,----------------------------------------------------------------.
+ * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |~ ` |
+ * |----------------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del |
+ * |----------------------------------------------------------------|
+ * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp|
+ * |----------------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn|
+ * |----------------------------------------------------------------|
+ * |Ctrl|Win |Alt | Space |Alt| FN|Ctrl|Lef|Dow|Rig |
+ * `----------------------------------------------------------------'
+ */
+[0] = LAYOUT_65_ansi(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap Fn Layer
+ * ,----------------------------------------------------------------.
+ * | | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |Ins |
+ * |----------------------------------------------------------------|
+ * | | |Up | | | | | | | | | | | |Hme |
+ * |----------------------------------------------------------------|
+ * | |<- |Dn | ->| | | | | | | | | |End |
+ * |----------------------------------------------------------------|
+ * | | | |Bl-|BL |BL+| |VU-|VU+|MUT| | McL|MsU|McR |
+ * |----------------------------------------------------------------|
+ * | | | | | | | |MsL|MsD|MsR |
+ * `----------------------------------------------------------------'
+ */
+[1] = LAYOUT_65_ansi(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,KC_INS, \
+ KC_CAPS,_______, KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP,_______, _______,_______, \
+ _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT, _______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN, _______,KC_PGUP,_______, \
+ _______, _______, _______, _______, _______,_______,_______,KC_HOME,KC_PGDN, KC_END),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QMKBEST:
+ if (record->event.pressed) {
+ // when keycode QMKBEST is pressed
+ SEND_STRING("QMK is the best thing ever!");
+ } else {
+ // when keycode QMKBEST is released
+ }
+ break;
+ case QMKURL:
+ if (record->event.pressed) {
+ // when keycode QMKURL is pressed
+ SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+ } else {
+ // when keycode QMKURL is released
+ }
+ break;
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd67/rev1/keymaps/default/readme.md b/keyboards/kbdfans/kbd67/rev1/keymaps/default/readme.md
new file mode 100644
index 0000000000..2cb43c5e1a
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for kbd67
diff --git a/keyboards/kbdfans/kbd67/rev1/readme.md b/keyboards/kbdfans/kbd67/rev1/readme.md
new file mode 100644
index 0000000000..ab5209646f
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/readme.md
@@ -0,0 +1,13 @@
+# kbd67
+
+65% keyboard with blocker.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+Hardware Supported: KBD67 PCB
+Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbd67/rev1:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd67/rev1/rev1.c b/keyboards/kbdfans/kbd67/rev1/rev1.c
new file mode 100644
index 0000000000..94cb9e553b
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/rev1.c
@@ -0,0 +1,51 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev1.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ DDRB |= (1 << 2);
+ PORTB &= ~(1 << 2);
+ } else {
+ DDRB &= ~(1 << 2);
+ PORTB &= ~(1 << 2);
+ }
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/kbdfans/kbd67/rev1/rev1.h b/keyboards/kbdfans/kbd67/rev1/rev1.h
new file mode 100644
index 0000000000..4ee136393a
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/rev1.h
@@ -0,0 +1,59 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef REV1_H
+#define REV1_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+ K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
+ K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \
+ K40, K41, K43, K44, K46, K48, K4A, K4B, K4C, K4D, K4E, K4F \
+) \
+{ \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \
+ { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
+ { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F }, \
+ { K40, K41, KC_NO, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F }, \
+}
+
+#define LAYOUT_65_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, \
+ K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
+ K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \
+ K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E, K4F \
+) \
+{ \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E, K0F }, \
+ { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
+ { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F }, \
+ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F }, \
+ { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F }, \
+}
+
+#endif
diff --git a/keyboards/kbdfans/kbd67/rev1/rules.mk b/keyboards/kbdfans/kbd67/rev1/rules.mk
new file mode 100644
index 0000000000..0d7c14ad45
--- /dev/null
+++ b/keyboards/kbdfans/kbd67/rev1/rules.mk
@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
diff --git a/keyboards/kbdfans/kbd6x/config.h b/keyboards/kbdfans/kbd6x/config.h
new file mode 100644
index 0000000000..4a3fb881bf
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/config.h
@@ -0,0 +1,218 @@
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER You
+#define PRODUCT kbd6x
+#define DESCRIPTION A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
+#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D0, D1, D2, D3, D5, D6, D7, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 12
+#define RGBLIGHT_VAL_STEP 12
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
diff --git a/keyboards/kbdfans/kbd6x/info.json b/keyboards/kbdfans/kbd6x/info.json
new file mode 100644
index 0000000000..201c6bd3cf
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/info.json
@@ -0,0 +1,12 @@
+{
+ "keyboard_name": "kbd6x",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]
+ }
+ }
+} \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd6x/kbd6x.c b/keyboards/kbdfans/kbd6x/kbd6x.c
new file mode 100644
index 0000000000..f558af0304
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/kbd6x.c
@@ -0,0 +1,49 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kbd6x.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ DDRB |= (1 << 6);
+ PORTB &= ~(1 << 6);
+ } else {
+ DDRB &= ~(1 << 6);
+ PORTB &= ~(1 << 6);
+ }
+
+ led_set_user(usb_led);
+} \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd6x/kbd6x.h b/keyboards/kbdfans/kbd6x/kbd6x.h
new file mode 100644
index 0000000000..3d0c70f77a
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/kbd6x.h
@@ -0,0 +1,36 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KBD6X_H
+#define KBD6X_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K4D,\
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+ K40, K41, K42, K46, K4A, K4B, K4C \
+) \
+{ \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \
+ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D }, \
+}
+
+#endif
diff --git a/keyboards/kbdfans/kbd6x/keymaps/default/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/default/keymap.c
new file mode 100644
index 0000000000..e2e96fc634
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/default/keymap.c
@@ -0,0 +1,48 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_RCTL
+ ),
+
+ [1] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
+ KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
diff --git a/keyboards/kbdfans/kbd6x/keymaps/default/readme.md b/keyboards/kbdfans/kbd6x/keymaps/default/readme.md
new file mode 100644
index 0000000000..c416cd8fa7
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for kbd6x
diff --git a/keyboards/kbdfans/kbd6x/keymaps/hhkb-default-improved/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/hhkb-default-improved/keymap.c
new file mode 100644
index 0000000000..80c22e5d90
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/hhkb-default-improved/keymap.c
@@ -0,0 +1,50 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// iproved hhkb layout with more functionality
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_RCTL
+ ),
+
+ [1] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, RESET,
+ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_DEL,
+ KC_RCTL, KC_VOLU, KC_VOLD, KC_MUTE, KC_MPLY, KC_MSTP, KC_ASTR, KC_SLSH, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PLUS, KC_UNDS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
diff --git a/keyboards/kbdfans/kbd6x/keymaps/hhkb-default-improved/readme.md b/keyboards/kbdfans/kbd6x/keymaps/hhkb-default-improved/readme.md
new file mode 100644
index 0000000000..be22dd16c0
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/hhkb-default-improved/readme.md
@@ -0,0 +1 @@
+# this is the default hhkb layout in a more useable normalized form (aka the way i use mine) \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd6x/keymaps/hhkb-default/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/hhkb-default/keymap.c
new file mode 100644
index 0000000000..03153b67ac
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/hhkb-default/keymap.c
@@ -0,0 +1,51 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// stock hhkb as referenced by https://i.imgur.com/QoBTDHf.png
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_TRNS, KC_LALT, KC_LGUI, KC_SPACE, KC_RGUI, KC_RALT, KC_TRNS
+ ),
+
+ [1] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
+ KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET,
+ KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_MSTP, KC_TRNS, KC_ASTR, KC_SLSH, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PLUS, KC_UNDS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+};
+
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
diff --git a/keyboards/kbdfans/kbd6x/keymaps/hhkb-default/readme.md b/keyboards/kbdfans/kbd6x/keymaps/hhkb-default/readme.md
new file mode 100644
index 0000000000..cf93c3553a
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/hhkb-default/readme.md
@@ -0,0 +1 @@
+# default hhkb layout adapted to the 6x (for tofu hhkb) \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h b/keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h
new file mode 100644
index 0000000000..16387fa2f6
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h
@@ -0,0 +1,4 @@
+#pragma once
+
+#define LAYER_FN
+#define SEND_STRING_CLEAN
diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c
new file mode 100644
index 0000000000..fa324be9a1
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c
@@ -0,0 +1,92 @@
+#include QMK_KEYBOARD_H
+#include "konstantin.h"
+
+enum keycodes_keymap {
+ RCTRL = RANGE_KEYMAP,
+};
+
+enum layers_keymap {
+ L_RCTRL = L_RANGE_KEYMAP,
+};
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case RCTRL:
+ if (record->event.pressed) {
+ layer_on(L_RCTRL);
+ register_code(KC_RCTRL);
+ } else {
+ layer_off(L_RCTRL);
+ unregister_code(KC_RCTRL);
+ }
+ return false;
+
+ default:
+ return true;
+ }
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Base layer
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │LCtCps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │LShiftFn│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│FnL│
+ * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+ * │LGu│LAlt │ Space │RAlGu│RCt│
+ * └───┴─────┴───────────────────────────┴─────┴───┘
+ */
+ [L_BASE] = LAYOUT(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ LCT_CPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ LSFT_FN, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_FNLK,
+ XXXXXXX, KC_LGUI, KC_LALT, KC_SPC, RAL_RGU, RCTRL, XXXXXXX
+ ),
+
+ /* Function layer
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │ │Hom│ ↑ │End│PgU│ │ │ │ │M1 │M↑ │M2 │M3 │ Del │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │ │ ← │ ↓ │ → │PgD│ │ │ │MW↑│M← │M↓ │M→ │ │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │ │Mut│VoD│VoU│Ply│Prv│Nxt│MW←│MW→│M4 │M5 │ │ │
+ * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+ * │ │ │ MW↓ │MAcl2│ │
+ * └───┴─────┴───────────────────────────┴─────┴───┘
+ */
+ [L_FN] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS,
+ _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, KC_DEL,
+ _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______,
+ _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_WH_L, KC_WH_R, KC_BTN4, KC_BTN5, _______, _______,
+ XXXXXXX, _______, _______, KC_WH_D, KC_ACL2, _______, XXXXXXX
+ ),
+
+ /* RCtrl layer
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │ │Top│Mv↑│Btm│PrT│ │ │ │ │ │ │ │ │Clear│
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │ │Mv←│Mv↓│Mv→│NxT│ │ │ │ │ │ │ │ │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │
+ * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+ * │Dst│Dstp←│ │Dstp→│ │
+ * └───┴─────┴───────────────────────────┴─────┴───┘
+ */
+ [L_RCTRL] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, TOP, MV_UP, BOTTOM, PRV_TAB, _______, _______, _______, _______, _______, _______, _______, _______, CLEAR,
+ _______, MV_LEFT, MV_DOWN, MV_RGHT, NXT_TAB, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ XXXXXXX, DESKTOP, DSKTP_L, _______, DSKTP_R, _______, XXXXXXX
+ ),
+};
diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk b/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk
new file mode 100644
index 0000000000..a45a631dc0
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk
@@ -0,0 +1,2 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no
diff --git a/keyboards/kbdfans/kbd6x/keymaps/othi/config.h b/keyboards/kbdfans/kbd6x/keymaps/othi/config.h
new file mode 100644
index 0000000000..42f68b4358
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/othi/config.h
@@ -0,0 +1,10 @@
+#pragma once
+#define ONESHOT_TAP_TOOGLE 2
+#define ONESHOT_TIMEOUT 2000
+// tap dance configurations
+#define TAPPING_TERM 200
+#define TAPPING_TOGGLE 2
+#define PERMISSIVE_HOLD
+// Fix KC_GESC conflict with Cmd+Alt+Esc on macros
+#define GRAVE_ESC_GUI_OVERRIDE
+
diff --git a/keyboards/kbdfans/kbd6x/keymaps/othi/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/othi/keymap.c
new file mode 100644
index 0000000000..1e0fc8ad7e
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/othi/keymap.c
@@ -0,0 +1,190 @@
+/* Copyright 2018 Othi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// read README.md for rundown of what does what
+
+// #define BL 0
+#define CL 0
+#define NM_MODE 2
+#define VI_MODE 3
+#define FN3 4
+#define ACCENT 5
+#define ACCENT_CAP 6
+
+//Unicode keymaps
+void eeconfig_init_user(void) {
+ set_unicode_input_mode(UC_LNX);
+}
+#define DE_AE UC(0x00E4)
+#define DE_SS UC(0x00DF)
+#define DE_OE UC(0x00F6)
+#define DE_UE UC(0x00FC)
+#define DE_AE_CAP UC(0x00C4)
+#define DE_OE_CAP UC(0x00D6)
+#define DE_UE_CAP UC(0x00DC)
+
+uint32_t layer_state_set_user(uint32_t state) {
+ switch (biton32(state)) {
+ case NM_MODE:
+ rgblight_setrgb (0x00, 0x66, 0x00);
+ break;
+ case VI_MODE:
+ rgblight_setrgb (0x66, 0x66, 0x00);
+ break;
+ case ACCENT:
+ rgblight_setrgb (0x7A, 0x00, 0xFF);
+ break;
+ case ACCENT_CAP:
+ rgblight_setrgb (0x7A, 0xFF, 0xFF);
+ break;
+ default: // for any other layers, or the default layer
+ rgblight_setrgb (0xFF, 0x00, 0x00);
+ break;
+ }
+ return state;
+}
+
+//Tap Dance Declarations
+enum {
+ CTL_NM = 0,
+ ALT_NM = 1,
+ SFT_NM = 2,
+ GUI_NM = 3
+};
+
+void dance_CTL_NM_finished (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ set_oneshot_mods(MOD_LCTL);
+ } else {
+ register_code (KC_LCTL);
+ layer_on(NM_MODE);
+ }
+}
+
+void dance_CTL_NM_reset (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ unregister_code (KC_LCTL);
+ } else {
+ unregister_code (KC_LCTL);
+ layer_off(NM_MODE);
+ }
+}
+
+void dance_GUI_NM_finished (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ register_code (KC_LGUI);
+ } else {
+ register_code (KC_LGUI);
+ layer_on(NM_MODE);
+ }
+}
+
+void dance_GUI_NM_reset (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ unregister_code (KC_LGUI);
+ } else {
+ unregister_code (KC_LGUI);
+ layer_off(NM_MODE);
+ }
+}
+
+void dance_ALT_NM_finished (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ register_code (KC_LALT);
+ } else {
+ register_code (KC_LALT);
+ layer_on(NM_MODE);
+ }
+}
+
+void dance_ALT_NM_reset (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ unregister_code (KC_LALT);
+ } else {
+ unregister_code (KC_LALT);
+ layer_off(NM_MODE);
+ }
+}
+
+void dance_SFT_NM_finished (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ register_code (KC_LSFT);
+ set_oneshot_mods(MOD_LSFT);
+ } else {
+ register_code (KC_LSFT);
+ layer_on(NM_MODE);
+ }
+}
+
+void dance_SFT_NM_reset (qk_tap_dance_state_t *state, void *user_data) {
+ if (state->count == 1) {
+ unregister_code (KC_LSFT);
+ } else {
+ unregister_code (KC_LSFT);
+ layer_off(NM_MODE);
+ }
+}
+
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+ [CTL_NM] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_CTL_NM_finished, dance_CTL_NM_reset),
+ [GUI_NM] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_GUI_NM_finished, dance_GUI_NM_reset),
+ [ALT_NM] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_ALT_NM_finished, dance_ALT_NM_reset),
+ [SFT_NM] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_SFT_NM_finished, dance_SFT_NM_reset)
+};
+
+// backup
+// old R3 capslock, LT(NM_MODE,KC_BSPC),
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [CL] = LAYOUT(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+ MT(MOD_LGUI,KC_TAB), LT(NM_MODE,KC_Q), KC_W, LT(ACCENT,KC_F), KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC,
+ MT(MOD_LCTL,KC_BSPC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT,
+ TD(SFT_NM), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, MT(MOD_LCTL,KC_COMM), MT(MOD_LSFT,KC_DOT), MT(MOD_LALT,KC_SLSH), LM(CL,MOD_LGUI|MOD_LSFT), TT(NM_MODE),
+ _______, TD(CTL_NM), TD(ALT_NM), KC_SPC, LM(CL,MOD_LGUI|MOD_LALT), OSL(ACCENT) , _______
+ ),
+ [NM_MODE] = LAYOUT(
+ KC_GRV, KC_MPRV, KC_MNXT, KC_MPLY, KC_END, _______, _______, _______, _______, _______, KC_HOME, _______, _______, RESET, KC_INS,
+ LGUI(KC_TAB), _______, LCTL(KC_RGHT), _______, _______, _______, _______, KC_UP, KC_PGUP, _______, _______, _______, TG(CL), KC_DEL,
+ _______, KC_LEFT, _______, KC_RGHT, _______, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_ENT, KC_QUOT, KC_LGUI,
+ KC_LSFT, _______, _______, _______, _______, LCTL(KC_LEFT), _______, _______, _______, _______, _______, TG(VI_MODE), TO(CL),
+ _______, TD(CTL_NM), TD(ALT_NM), KC_SPC, LM(CL,MOD_LGUI|MOD_LALT), OSL(ACCENT), _______
+ ),
+
+ [VI_MODE] = LAYOUT(
+ KC_GRV, KC_MPRV, KC_MNXT, KC_MPLY, LSFT(KC_END), KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, LSFT(KC_HOME), KC_F11, KC_F12, RESET, KC_INS,
+ LGUI(KC_TAB), _______, LSFT(LCTL(KC_RGHT)), _______, _______, _______, _______, LSFT(KC_UP), _______, _______, _______, _______, TG(CL), KC_BSPC,
+ _______, _______, _______, _______, _______, _______, LSFT(LCTL(KC_LEFT)), LSFT(KC_DOWN), LSFT(KC_RGHT), _______, KC_SCLN, KC_QUOT, KC_LGUI,
+ KC_LSFT, _______, _______, _______, _______, LSFT(LCTL(KC_LEFT)), _______, _______, _______, _______, KC_SLSH, OSM(MOD_LSFT), TO(CL),
+ _______, TD(CTL_NM), TD(ALT_NM), KC_SPC, LM(CL,MOD_LGUI|MOD_LALT), OSL(ACCENT), _______
+ ),
+ [ACCENT] = LAYOUT(
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
+ _______, RGB_TOG, RGB_MODE_PLAIN, _______, _______, _______, _______, _______, DE_UE, _______, _______, _______, _______, _______,
+ _______, DE_AE, UC_Z, DE_SS, _______, _______, _______, _______, _______, _______, DE_OE, _______, _______,
+ OSL(ACCENT_CAP), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, TO(CL),
+ _______, _______, _______, _______, _______, _______, _______
+ ),
+ [ACCENT_CAP] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, DE_UE_CAP, _______, _______, _______, _______, _______,
+ _______, DE_AE_CAP, _______, DE_SS, _______, _______, _______, _______, _______, _______, DE_OE_CAP, _______, TO(CL),
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+ ),
+};
+
diff --git a/keyboards/kbdfans/kbd6x/keymaps/othi/readme.md b/keyboards/kbdfans/kbd6x/keymaps/othi/readme.md
new file mode 100644
index 0000000000..95be36d057
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/othi/readme.md
@@ -0,0 +1,56 @@
+## Othi's Universal HHKB keymap
+
+### Goals
+- Colemak layout. If you don't use Colemak then you'll need to also change the arrow key bindigns in other layers
+
+- Vim-like navigation layer so you can use vim binding arrowkeys in non-vim environment
+
+- Good modifier support so you don't have to hold 14 modifier keys at the same time
+
+- RGB indicating layer change(only work with plain colors so far, don't put your rgb to pulsing or any non static animation)
+
+### Layers
+- **CL:**
+
+ The base layer, default is Colemak
+
+- **NM_MODE:**
+
+ Vim-like arrowkeys in the home row, it's `LHNE` for *JENK Colemak* and `HJKL` for *QWERTY*
+
+ Also `HOME`, `END` and next/prev word (`Ctrl + Left/Right`) in `0, 4, w, b` like in vim
+
+- **VI_MODE:**
+
+ The same as `NM_MODE` but with `KC_LSFT` held down for mostly highlighting
+
+- **ACCENT + ACCENT_CAP:**
+
+ Function row and Unicode characters
+
+### Modifiers and Tap Dance keys
+**LHS:**
+
+- Any Tap Dance key with the format of `TD(XXX_NM)` act as normal XXX modifier upon hold, but will hold **and** put you to `NM_MODE` when double click hold(a tap before the hold)(eg you can produce `Alt + PgUp` by pressing `Alt + Alt + U`)
+
+- `KC_TAB` acts as both `KC_TAB` on tap and `KC_LGUI` on hold
+
+- R3 CapsLock acts as both `KC_BSPC` on tap and `KC_LCTL` on hold
+
+- Holding `KC_Q` also puts you into `NM_MODE`
+
+- Holding `KC_F` puts you into `VI_MODE` for fast function keys
+
+**RHS:**
+
+- 3 keys `KC_SCLN`, `KC_DOT` and `KC_SLSH` in `CL` layer can also be held down for respectively `KC_LCTL`, `KC_LSFT`, `KC_LALT` for easier 2-hand modifier holding
+
+- Right modifiers hold the selected modifier with `KC_LGUI` at the same time, mainly for i3wm, you can change this to whatever combination you want
+
+### Misc. functionalities
+
+**Unicode:**
+
+- In case the keyboard output the 4-digit codepoint instead of the actual unicode, you need to change the rewrite input mode of the keyboard into the EEPROM(you only have to do this if the EEPROM was cleared or your current machine use another unicode compose method other than IBus/Linux's `Ctrl + Shift + U`). Change the corresponding Input `void eeconfig_init_user(void)`. See [this](https://docs.qmk.fm/#/feature_unicode) for availble input modes.
+
+- **NOTE:** make sure to keep your qmk env up to date with upstream
diff --git a/keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk b/keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk
new file mode 100644
index 0000000000..9cda4109dd
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk
@@ -0,0 +1,19 @@
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = yes # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+TAP_DANCE_ENABLE=yes
+
diff --git a/keyboards/kbdfans/kbd6x/readme.md b/keyboards/kbdfans/kbd6x/readme.md
new file mode 100644
index 0000000000..1728c8c21b
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/readme.md
@@ -0,0 +1,13 @@
+# KBD6x
+
+A WKL Hot Swap Double USB C 60%
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+Hardware Supported: KBD6x PCB
+Hardware Availability: [KBDFans](https://kbdfans.cn/products/kbd6x-wkl-hot-swap-60-double-type-c-pcb)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbdfans/kbd6x:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd6x/rules.mk b/keyboards/kbdfans/kbd6x/rules.mk
new file mode 100644
index 0000000000..e9b61a76d6
--- /dev/null
+++ b/keyboards/kbdfans/kbd6x/rules.mk
@@ -0,0 +1,70 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
diff --git a/keyboards/kbdfans/kbd75/config.h b/keyboards/kbdfans/kbd75/config.h
new file mode 100644
index 0000000000..6f0cd86de3
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/config.h
@@ -0,0 +1,50 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER qmkbuilder
+#define PRODUCT KBD75
+#define DESCRIPTION QMK keyboard firmware for KBD75
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, B7 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, F5, D4, B1, B0, B5, B4, D7, D6, B3, F4, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
diff --git a/keyboards/kbdfans/kbd75/kbd75.c b/keyboards/kbdfans/kbd75/kbd75.c
new file mode 100644
index 0000000000..9f6e545ca2
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/kbd75.c
@@ -0,0 +1 @@
+#include "kbd75.h"
diff --git a/keyboards/kbdfans/kbd75/kbd75.h b/keyboards/kbdfans/kbd75/kbd75.h
new file mode 100644
index 0000000000..8e6f094500
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/kbd75.h
@@ -0,0 +1,15 @@
+#ifndef KBD75_H
+#define KBD75_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_kbdfans_kbd75_rev1
+ #include "rev1.h"
+#endif
+
+#ifdef KEYBOARD_kbdfans_kbd75_rev2
+ #include "../rev1/rev1.h"
+ #include "rev2.h"
+#endif
+
+#endif
diff --git a/keyboards/kbdfans/kbd75/keymaps/adit/keymap.c b/keyboards/kbdfans/kbd75/keymaps/adit/keymap.c
new file mode 100644
index 0000000000..b7cae4810b
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/keymaps/adit/keymap.c
@@ -0,0 +1,78 @@
+#include QMK_KEYBOARD_H
+
+#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_DEL,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, _______, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, LT(1,KC_END),
+ KC_CAPS, KC_LALT, _______, _______, KC_SPC, _______, KC_RGUI, _______, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [1] = LAYOUT(
+ RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, BL_STEP, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+ switch (id) {
+
+ }
+ return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+enum function_id {
+ SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t shift_esc_shift_mask;
+ switch (id) {
+ case SHIFT_ESC:
+ shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+ if (record->event.pressed) {
+ if (shift_esc_shift_mask) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ if (shift_esc_shift_mask) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
diff --git a/keyboards/kbdfans/kbd75/keymaps/default/keymap.c b/keyboards/kbdfans/kbd75/keymaps/default/keymap.c
new file mode 100644
index 0000000000..839030aaa9
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/keymaps/default/keymap.c
@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, MO(1), KC_DEL,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, MO(1), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [1] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______,
+ _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, BL_STEP, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+};
diff --git a/keyboards/kbdfans/kbd75/keymaps/edulpn/README.md b/keyboards/kbdfans/kbd75/keymaps/edulpn/README.md
new file mode 100644
index 0000000000..57989ff9b6
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/keymaps/edulpn/README.md
@@ -0,0 +1,13 @@
+# Edulpn Keymap for the KBD75 PCB
+
+## Additional Notes
+75% Keymap for KBD75 with default ANSI layout + default layer switching for Windows and Mac "modes" + custom Fn layers for each mode.
+
+### Windows Mode
+![Edulpn Keymap for the KBD75 PCB Windows Mode](https://imgur.com/doI46vP.png)
+
+### Mac Mode
+![Edulpn Keymap for the KBD75 PCB Mac Mode](https://i.imgur.com/t7oTjjc.png)
+
+## Build
+To build the default keymap, simply run `make kbd75/rev2:edulpn`.
diff --git a/keyboards/kbdfans/kbd75/keymaps/edulpn/keymap.c b/keyboards/kbdfans/kbd75/keymaps/edulpn/keymap.c
new file mode 100644
index 0000000000..78a501ec4e
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/keymaps/edulpn/keymap.c
@@ -0,0 +1,67 @@
+#include QMK_KEYBOARD_H
+
+#define WINDOWS_LAYER 0
+#define WINDOWS_FN_LAYER 1
+#define MAC_LAYER 2
+#define MAC_FN_LAYER 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [WINDOWS_LAYER] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, TG(MAC_LAYER), KC_DEL,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(WINDOWS_FN_LAYER), KC_TRNS, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [WINDOWS_FN_LAYER] = LAYOUT(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+
+ [MAC_LAYER] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, TG(MAC_LAYER), KC_DEL,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, KC_LALT, KC_LCMD, KC_SPC, KC_SPC, KC_SPC, MO(MAC_FN_LAYER), KC_TRNS, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [MAC_FN_LAYER] = LAYOUT(
+ RESET, KC_BRID, KC_BRIU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MRWD, KC_MPLY, KC_MFFD, KC__MUTE, KC__VOLDOWN, KC__VOLUP, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ )
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+ switch (biton32(state)) {
+ case WINDOWS_LAYER:
+ rgblight_setrgb_blue();
+ break;
+ case WINDOWS_FN_LAYER:
+ rgblight_setrgb_blue();
+ break;
+ case MAC_LAYER:
+ rgblight_setrgb_white();
+ break;
+ case MAC_FN_LAYER:
+ rgblight_setrgb_white();
+ break;
+ default:
+ rgblight_setrgb (0x00, 0xFF, 0xFF);
+ break;
+ }
+ return state;
+}
+
diff --git a/keyboards/kbdfans/kbd75/keymaps/iso/keymap.c b/keyboards/kbdfans/kbd75/keymaps/iso/keymap.c
new file mode 100644
index 0000000000..0b7c701a30
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/keymaps/iso/keymap.c
@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, MO(1), KC_DEL,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [1] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______,
+ _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, BL_STEP, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
diff --git a/keyboards/kbdfans/kbd75/keymaps/smt/keymap.c b/keyboards/kbdfans/kbd75/keymaps/smt/keymap.c
new file mode 100644
index 0000000000..edf01c854e
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/keymaps/smt/keymap.c
@@ -0,0 +1,176 @@
+#include QMK_KEYBOARD_H
+
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _FL 3
+#define _CL 4
+
+enum planck_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK
+};
+
+// Custom macros
+#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl
+#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt)
+#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: Qwerty layer
+ * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+ * │ ESC │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │PRSCR│PAUSE│ DEL │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ INS │HOME │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │H_TAB│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BKSPC│█████│PG_UP│
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │C_ESC│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│PG_DN│
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│ UP │ END │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │LCTRL│L_GUI│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ _FL │R_GUI│LEFT │DOWN │RIGHT│
+ * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+ */
+
+ /* 0: ANSI qwerty */
+ [_QWERTY] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUS, KC_DEL, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_INS, KC_HOME, \
+ HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \
+ CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
+ KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, KC_UP, KC_END, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(_FL), KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* 1: Colemak layer
+ * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+ * │ ESC │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │PRSCR│PAUSE│ DEL │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ INS │HOME │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │H_TAB│ Q │ W │ F │ P │ G │ J │ L │ U │ Y │ ; │ [ │ ] │BKSPC│█████│PG_UP│
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │C_ESC│ A │ R │ S │ T │ D │ H │ N │ E │ I │ O │ ' │▒▒▒▒▒│ENTER│█████│PG_DN│
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ K │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│ UP │ END │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │LCTRL│L_GUI│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ _FL │R_GUI│LEFT │DOWN │RIGHT│
+ * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+ */
+
+ /* 1: ANSI colemak */
+ [_COLEMAK] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUS, KC_DEL, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_INS, KC_HOME, \
+ HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \
+ CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_PGDN, \
+ KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, KC_UP, KC_END, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(_FL), KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* 2: Dvorak layer
+ * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+ * │ ESC │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │PRSCR│PAUSE│ DEL │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ INS │HOME │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │H_TAB│ ' │ , │ . │ P │ Y │ F │ G │ C │ R │ L │ / │ = │BKSPC│█████│PG_UP│
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │C_ESC│ A │ O │ E │ U │ I │ D │ H │ T │ N │ S │ - │▒▒▒▒▒│ENTER│█████│PG_DN│
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │LSHFT│▒▒▒▒▒│ ; │ Q │ J │ K │ X │ B │ M │ W │ V │ Z │▒▒▒▒▒│RSHFT│ UP │ END │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │LCTRL│L_GUI│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ _FL │R_GUI│LEFT │DOWN │RIGHT│
+ * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+ */
+
+ /* 2: ANSI dvorak */
+ [_DVORAK] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUS, KC_DEL, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_HOME, \
+ HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, KC_PGUP, \
+ CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, KC_PGDN, \
+ KC_LSFT, _______, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, KC_UP, KC_END, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(_FL), KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* 3: Function layer
+ * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │█████│ │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │ │ _CL │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│ │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │PG_UP│ │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ _FL │ │HOME │PG_DN│ END │
+ * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+ */
+
+ /* 3: ANSI Fn layer */
+ [_FL] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, MO(_CL), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, \
+ _______, _______, _______, _______, _______, _______, _______, MO(_FL), _______, KC_HOME, KC_PGDN, KC_END),
+
+ /* 4: Control layer
+ * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ RGB │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │ │ │ │RESET│ │ │QWRTY│COLMK│DVORK│ │ │ │ │█████│RGBV+│
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │ │ _CL │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│RGBV-│
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ _FL │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │RGBS+│ │
+ * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+ * │ │ │ │█████│█████│█████│RGB_M│█████│█████│█████│ │ _FL │ │RGBH-│RGBS-│RGBH+│
+ * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+ */
+
+ /* 4: ANSI control layer */
+ [_CL] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, \
+ _______, _______, _______, _______, RESET, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, RGB_VAI, \
+ _______, _______, MO(_CL), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, \
+ MO(_FL), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, _______, \
+ _______, _______, _______, _______, RGB_MOD, _______, _______, MO(_FL), _______, RGB_HUD, RGB_SAD, RGB_HUI),
+};
+
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_DVORAK);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
diff --git a/keyboards/kbdfans/kbd75/keymaps/spacemanspiff/keymap.c b/keyboards/kbdfans/kbd75/keymaps/spacemanspiff/keymap.c
new file mode 100644
index 0000000000..05e7c56713
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/keymaps/spacemanspiff/keymap.c
@@ -0,0 +1,41 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+#define _BL 0 // Base Layer
+#define _FN 1 // Function Layer
+#define _CL 2 // Control+ Layer
+
+// Add names for complex momentary keys, to keep the keymap matrix aligned better.
+#define CTL_ESC MT(MOD_LCTL,KC_ESC)
+#define GUI_ENT MT(MOD_RGUI, KC_ENT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_BL] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, MO(_FN), KC_DEL,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, KC_HOME,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+ CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+ KC_LSFT, MO(_FN), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ MO(_CL), KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, GUI_ENT, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [_FN] = LAYOUT(
+ RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______,
+ _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
+ _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, BL_STEP, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+ [_CL] = LAYOUT(
+ LCTL(KC_ESC), LCTL(KC_F1), LCTL(KC_F2), LCTL(KC_F3), LCTL(KC_F4), LCTL(KC_F5), LCTL(KC_F6), LCTL(KC_F7), LCTL(KC_F8), LCTL(KC_F9), LCTL(KC_F10), LCTL(KC_F11), LCTL(KC_F12), LCTL(KC_PSCR), _______, LCTL(KC_DEL),
+ KC_ESC, LCTL(KC_1), LCTL(KC_2), LCTL(KC_3), LCTL(KC_4), LCTL(KC_5), LCTL(KC_6), LCTL(KC_7), LCTL(KC_8), LCTL(KC_9), LCTL(KC_0), LCTL(KC_MINS), LCTL(KC_EQL), LCTL(KC_DEL), KC_DEL, LCTL(KC_HOME),
+ LCTL(KC_TAB), LCTL(KC_Q), LCTL(KC_W), LCTL(KC_E), LCTL(KC_R), LCTL(KC_T), LCTL(KC_Y), LCTL(KC_U), LCTL(KC_I), LCTL(KC_O), KC_PGUP, LCTL(KC_LBRC), LCTL(KC_RBRC), LCTL(KC_BSLS), LCTL(KC_PGUP),
+ CTL_ESC, LCTL(KC_A), LCTL(KC_S), LCTL(KC_D), LCTL(KC_F), LCTL(KC_G), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, LCTL(KC_SCLN), LCTL(KC_QUOT), LCTL(KC_ENT), LCTL(KC_PGDN),
+ LCTL(KC_LSFT), _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), LCTL(KC_B), KC_PGDN, LCTL(KC_M), LCTL(KC_COMM), LCTL(KC_DOT), LCTL(KC_SLSH), LCTL(KC_RSFT), LCTL(KC_UP), LCTL(KC_END),
+ _______, LCTL(KC_LALT), LCTL(KC_LGUI), LCTL(KC_SPC), LCTL(KC_SPC), LCTL(KC_SPC), LCTL(KC_RGUI), LCTL(KC_RALT), LCTL(KC_RCTL), LCTL(KC_LEFT), LCTL(KC_DOWN), LCTL(KC_RGHT)
+ ),
+
+};
diff --git a/keyboards/kbdfans/kbd75/keymaps/spacemanspiff/readme.md b/keyboards/kbdfans/kbd75/keymaps/spacemanspiff/readme.md
new file mode 100644
index 0000000000..6a78140a3d
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/keymaps/spacemanspiff/readme.md
@@ -0,0 +1,35 @@
+# Spaceman Spiff Layout for KBD75
+
+![Keyboard Layout](https://i.imgur.com/tQLYDvu.png)
+
+<!-- http://www.keyboard-layout-editor.com/#/gists/c1e8a15c68e4c52eed84653f21ae2d29 -->
+
+Designed specifically to make switching back-n-forth with the Apple's MacBook Pro keyboard intuitive. Has a slight tendency toward readline/vim keybindings.
+
+Caps locks becomes an `Esc` when pressed alone, or a `Ctrl` when pressed with another key.
+
+# Base Layer
+
+As simalar to the Apple keyboard as possible. Notiable exception is `Caps Lock`:
+- `Esc` when pressed alone
+- `Ctrl` when pressed with another key
+
+# Control+ Layer
+
+Left Ctrl key switches to the "Control+ Layer". This layer mostly acts like a control key in most cases, with a few exceptions:
+
+- `Ctl+` + `hjkl` are vim-style motion keys
+- `Ctl+` + `p` and `Ctl+` + `n` are page up and down
+- `Ctl+` + `Backspace` is forward delete
+
+# Fn Layer
+
+Audio Controls:
+- `Fn` + `a` Volume Down
+- `Fn` + `s` Volume Up
+- `Fn` + `d` Mute
+
+To flash this layout you need to press `Fn+Backspace`
+
+
+
diff --git a/keyboards/kbdfans/kbd75/readme.md b/keyboards/kbdfans/kbd75/readme.md
new file mode 100644
index 0000000000..89fe274161
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/readme.md
@@ -0,0 +1,17 @@
+# KBD75
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: KBD75 PCB rev 1 and 2
+Hardware Availability: https://kbdfans.myshopify.com/products/kbd75-keyboard-set?variant=35638534029
+
+The KBD75 has two revisions. Revision 2 has a USB C port and allows a numpad layout. `.hex` files made
+for KBD75 revision 1, will still work for revision 2. `.hex` files made for revision 2 (excluding the numpad)
+will also still work on revision 1. Both revisions share the same switch matrix but have switch holes in
+different areas.
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbdfans/kbd75/rev1:default
+ make kbdfans/kbd75/rev2:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd75/rev1/info.json b/keyboards/kbdfans/kbd75/rev1/info.json
new file mode 100644
index 0000000000..4f963c2d80
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rev1/info.json
@@ -0,0 +1,33 @@
+{
+ "keyboard_name": "KBD75",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 16,
+ "height": 6,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 88,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":2.25}, {"x":6, "y":5}, {"x":7, "y":5, "w":3}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_ansi_1u": {
+ "key_count": 84,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"delete", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_iso_1u": {
+ "key_count": 85,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"delete", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"@", "x":11.75, "y":3}, {"label":"~", "x":12.75, "y":3}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_ansi": {
+ "key_count": 83,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"delete", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_iso": {
+ "key_count": 84,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"\u00ac", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"\"", "x":2, "y":1}, {"label":"\u00a3", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"@", "x":11.75, "y":3}, {"label":"~", "x":12.75, "y":3}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"|", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"AltGr", "x":10, "y":5, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ }
+ }
+}
diff --git a/keyboards/kbdfans/kbd75/rev1/rev1.c b/keyboards/kbdfans/kbd75/rev1/rev1.c
new file mode 100644
index 0000000000..9ed08602a4
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rev1/rev1.c
@@ -0,0 +1,12 @@
+#include "rev1.h"
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ writePinHigh(B2);
+ } else {
+ writePinLow(B2);
+ }
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/kbdfans/kbd75/rev1/rev1.h b/keyboards/kbdfans/kbd75/rev1/rev1.h
new file mode 100644
index 0000000000..fd3e6e4882
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rev1/rev1.h
@@ -0,0 +1,118 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "quantum.h"
+#include "../kbd75.h"
+
+/* LAYOUT
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
+ * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤
+ * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
+ * │1.5U │ │ │ │ │ │ │ │ │ │ │ │ │1.5U │ │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+ * │1.75U │ │ │ │ │ │ │ │ │ │ │ │2.25U │ │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+ * │2.25U │ │ │ │ │ │ │ │ │ │ │1.75U │ │ │
+ * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬┴──┬───┼───┼───┤
+ * │1.25│1.25│1.25│2.25U │1.25│2.75U │ │ │ │ │ │ │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┴───┘
+ */
+
+// LAYOUT for all possible switch positions on a KBD75
+#define LAYOUT( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
+ K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
+ K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \
+ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, K415, \
+ K500, K501, K503, K504, K506, K508, K510, K511, K512, K513, K514, K515 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \
+ { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \
+ { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, K415 }, \
+ { K500, K501, KC_NO, K503, K504, KC_NO, K506, KC_NO, K508, KC_NO, K510, K511, K512, K513, K514, K515 } \
+}
+
+
+/* 1U bottom row ─────────────────────────── ↓ ─ ↓ ─ ↓
+ * ┌────┬────┬────┬────────────────────────┬───┬───┬───┬───┬───┬───┐
+ * │1.25│1.25│1.25│6.25U │1U │1U │1U │1U │1U │1U │
+ * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┘
+ */
+
+ #define LAYOUT_ansi_1u( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \
+ K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
+ K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \
+ K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, K415, \
+ K500, K501, K503, K506, K510, K511, K512, K513, K514, K515 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \
+ { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \
+ { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
+ { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, K415 }, \
+ { K500, K501, KC_NO, K503, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514, K515 } \
+}
+
+#define LAYOUT_iso_1u( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \
+ K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K313, K215, \
+ K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K214, K315, \
+ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, K415, \
+ K500, K501, K503, K506, K510, K511, K512, K513, K514, K515 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \
+ { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \
+ { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, K415 }, \
+ { K500, K501, KC_NO, K503, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514, K515 } \
+}
+
+
+/* normal bottom row ──────────────────────── ↓ ─── ↓
+ * ┌────┬────┬────┬────────────────────────┬─────┬─────┬───┬───┬───┐
+ * │1.25│1.25│1.25│6.25U │1.5U │1.5U │1U │1U │1U │
+ * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┘
+ */
+
+ #define LAYOUT_ansi( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \
+ K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
+ K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \
+ K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, K415, \
+ K500, K501, K503, K506, K510, K512, K513, K514, K515 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \
+ { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \
+ { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
+ { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, K415 }, \
+ { K500, K501, KC_NO, K503, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, KC_NO, K512, K513, K514, K515 } \
+}
+
+#define LAYOUT_iso( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \
+ K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K313, K215, \
+ K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K214, K315, \
+ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, K415, \
+ K500, K501, K503, K506, K510, K512, K513, K514, K515 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \
+ { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \
+ { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, K415 }, \
+ { K500, K501, KC_NO, K503, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, KC_NO, K512, K513, K514, K515 } \
+}
+
+#endif
diff --git a/keyboards/kbdfans/kbd75/rev1/rules.mk b/keyboards/kbdfans/kbd75/rev1/rules.mk
new file mode 100644
index 0000000000..9c4082da29
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rev1/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd75/rev2/info.json b/keyboards/kbdfans/kbd75/rev2/info.json
new file mode 100644
index 0000000000..31a5d3117c
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rev2/info.json
@@ -0,0 +1,37 @@
+{
+ "keyboard_name": "KBD75",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 16,
+ "height": 6,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 88,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":2.25}, {"x":6, "y":5}, {"x":7, "y":5, "w":3}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_ansi_1u": {
+ "key_count": 84,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"delete", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_iso_1u": {
+ "key_count": 85,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"delete", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"@", "x":11.75, "y":3}, {"label":"~", "x":12.75, "y":3}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_ansi": {
+ "key_count": 83,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"delete", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_iso": {
+ "key_count": 84,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"\u00ac", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"\"", "x":2, "y":1}, {"label":"\u00a3", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"@", "x":11.75, "y":3}, {"label":"~", "x":12.75, "y":3}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"|", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"AltGr", "x":10, "y":5, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+ },
+
+ "LAYOUT_numpad": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"label":"Home", "x":13, "y":1}, {"label":"_", "x":14, "y":1}, {"label":"+", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"|", "x":11.5, "y":2, "w":1.5}, {"label":"Page Up", "x":13, "y":2}, {"label":"{", "x":14, "y":2}, {"label":"}", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":"Enter", "x":10.75, "y":3, "w":2.25}, {"label":"Page Down", "x":13, "y":3}, {"label":":", "x":14, "y":3}, {"label":"\"", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"?", "x":9.25, "y":4}, {"label":"Shift", "x":10.25, "y":4, "w":1.75}, {"label":"\u2191", "x":12, "y":4}, {"label":"End", "x":13, "y":4}, {"label":"<", "x":14, "y":4}, {"label":">", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":1.25}, {"x":5, "y":5, "w":2.25}, {"x":7.25, "y":5, "w":1.75}, {"x":9, "y":5}, {"label":"Alt", "x":10, "y":5}, {"label":"\u2190", "x":11, "y":5}, {"label":"\u2193", "x":12, "y":5}, {"label":"\u2192", "x":13, "y":5}, {"label":"Fn", "x":14, "y":5}, {"label":"Ctrl", "x":15, "y":5}]
+ }
+ }
+}
diff --git a/keyboards/kbdfans/kbd75/rev2/rev2.c b/keyboards/kbdfans/kbd75/rev2/rev2.c
new file mode 100644
index 0000000000..bec65d6a6c
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rev2/rev2.c
@@ -0,0 +1,12 @@
+#include "rev2.h"
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ writePinHigh(B2);
+ } else {
+ writePinLow(B2);
+ }
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/kbdfans/kbd75/rev2/rev2.h b/keyboards/kbdfans/kbd75/rev2/rev2.h
new file mode 100644
index 0000000000..f2a1fead29
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rev2/rev2.h
@@ -0,0 +1,25 @@
+#ifndef REV2_H
+#define REV2_H
+
+#include "quantum.h"
+#include "../kbd75.h"
+
+
+// LAYOUT for all possible switch positions on a KBD75 rev 2
+#define LAYOUT_numpad( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
+ K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
+ K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \
+ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, K415, \
+ K500, K501, K503, K504, K506, K508, K509, K510, K511, K512, K513, K514, K515 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \
+ { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \
+ { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, K415 }, \
+ { K500, K501, KC_NO, K503, K504, KC_NO, K506, KC_NO, K508, K509, K510, K511, K512, K513, K514, K515 } \
+}
+
+#endif
diff --git a/keyboards/kbdfans/kbd75/rev2/rules.mk b/keyboards/kbdfans/kbd75/rev2/rules.mk
new file mode 100644
index 0000000000..9c4082da29
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rev2/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd75/rules.mk b/keyboards/kbdfans/kbd75/rules.mk
new file mode 100644
index 0000000000..5c46171316
--- /dev/null
+++ b/keyboards/kbdfans/kbd75/rules.mk
@@ -0,0 +1 @@
+DEFAULT_FOLDER = kbdfans/kbd75/rev1
diff --git a/keyboards/kbdfans/kbd8x/config.h b/keyboards/kbdfans/kbd8x/config.h
new file mode 100644
index 0000000000..dca9b40ee0
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/config.h
@@ -0,0 +1,190 @@
+/*
+Copyright 2017 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER KBDFans
+#define PRODUCT kbd8x
+#define DESCRIPTION Custom TKL Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { E6, B7, D4, F0, D6, D7 }
+#define MATRIX_COL_PINS { D1, D0, F7, F6, F5, D5, D3, D2, C7, C6, B5, F4, F1, B4, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
diff --git a/keyboards/kbdfans/kbd8x/info.json b/keyboards/kbdfans/kbd8x/info.json
new file mode 100644
index 0000000000..fe94f1b3ac
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/info.json
@@ -0,0 +1,16 @@
+{
+ "keyboard_name": "KBD 8X",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 18.25,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+ },
+
+ "LAYOUT_tkl_ansi": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+ }
+ }
+}
diff --git a/keyboards/kbdfans/kbd8x/kbd8x.c b/keyboards/kbdfans/kbd8x/kbd8x.c
new file mode 100644
index 0000000000..97c2e74e3a
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/kbd8x.c
@@ -0,0 +1,72 @@
+/* Copyright 2017 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "kbd8x.h"
+
+extern inline void caps_led_off(void);
+extern inline void caps_led_on(void);
+extern inline void num_led_off(void);
+extern inline void num_led_on(void);
+extern inline void scroll_led_off(void);
+extern inline void scroll_led_on(void);
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ if(usb_led & (1<<USB_LED_NUM_LOCK))
+ {
+ num_led_on();
+ } else {
+ num_led_off();
+ }
+
+ if(usb_led & (1<<USB_LED_CAPS_LOCK))
+ {
+ caps_led_on();
+ } else {
+ caps_led_off();
+ }
+
+ if(usb_led & (1<<USB_LED_SCROLL_LOCK))
+ {
+ scroll_led_on();
+ } else {
+ scroll_led_off();
+ }
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/kbdfans/kbd8x/kbd8x.h b/keyboards/kbdfans/kbd8x/kbd8x.h
new file mode 100644
index 0000000000..f28b8ca7a1
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/kbd8x.h
@@ -0,0 +1,69 @@
+/* Copyright 2017 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#include "led.h"
+
+// Functions for setting LEDs on toggle keys
+inline void caps_led_on(void) { DDRB |= (1<<3); PORTB &= ~(1<<3); }
+inline void caps_led_off(void) { DDRB &= ~(1<<3); PORTB &= ~(1<<3); }
+
+inline void num_led_on(void) { DDRB |= (1<<1); PORTB &= ~(1<<1); }
+inline void num_led_off(void) { DDRB &= ~(1<<1); PORTB &= ~(1<<1); }
+
+inline void scroll_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
+inline void scroll_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+
+
+// LAYOUT depicting all possible switch positions.
+// LAYOUT_all supports ISO, split backspace and split left/right shift.
+#define LAYOUT_all( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K3D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K5B, K5C, K3E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K5D, K5E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+ K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \
+ K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A \
+) \
+{ \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E } \
+}
+
+// LAYOUT depicting only switch positions for a standard TKL ANSI keyboard.
+// TODO: Double check location of backspace key for 2u layout (It's either K1D or K1C).
+#define LAYOUT_tkl_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K3D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, K5B, K5C, K3E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K5D, K5E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+ K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4E, \
+ K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A \
+) \
+{ \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, KC_NO, K4E }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E } \
+}
+
diff --git a/keyboards/kbdfans/kbd8x/keymaps/default/config.h b/keyboards/kbdfans/kbd8x/keymaps/default/config.h
new file mode 100644
index 0000000000..fa7db0bc10
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/keymaps/default/config.h
@@ -0,0 +1,17 @@
+/* Copyright 2017 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
diff --git a/keyboards/kbdfans/kbd8x/keymaps/default/keymap.c b/keyboards/kbdfans/kbd8x/keymaps/default/keymap.c
new file mode 100644
index 0000000000..a7dcd5518c
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/keymaps/default/keymap.c
@@ -0,0 +1,68 @@
+/* Copyright 2017 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ [1] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, BL_TOGG, BL_INC, BL_DEC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd8x/keymaps/default/readme.md b/keyboards/kbdfans/kbd8x/keymaps/default/readme.md
new file mode 100644
index 0000000000..773a3dfbae
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default keymap for kbd8x
+
+This keymap uses the LAYOUT_all macro when creating its keymap. \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/config.h b/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/config.h
new file mode 100644
index 0000000000..fa7db0bc10
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/config.h
@@ -0,0 +1,17 @@
+/* Copyright 2017 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
diff --git a/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/keymap.c b/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/keymap.c
new file mode 100644
index 0000000000..e664575d5f
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/keymap.c
@@ -0,0 +1,67 @@
+/* Copyright 2017 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ [1] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, RESET, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, BL_TOGG, BL_INC, BL_DEC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/readme.md b/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/readme.md
new file mode 100644
index 0000000000..773a3dfbae
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/readme.md
@@ -0,0 +1,3 @@
+# The default keymap for kbd8x
+
+This keymap uses the LAYOUT_all macro when creating its keymap. \ No newline at end of file
diff --git a/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/rules.mk b/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/rules.mk
new file mode 100644
index 0000000000..d98bb1cb17
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/keymaps/default_backlighting/rules.mk
@@ -0,0 +1 @@
+#Build Options
diff --git a/keyboards/kbdfans/kbd8x/readme.md b/keyboards/kbdfans/kbd8x/readme.md
new file mode 100644
index 0000000000..9f8555560a
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/readme.md
@@ -0,0 +1,15 @@
+# KBD8X
+
+![kbd8x](imgur.com image replace me!)
+
+TKL Keyboard from KBDFans
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+Hardware Supported: kbd8x
+Hardware Availability: [KBDFans](https://kbdfans.cn/blogs/updates/kbd-8x-update-40)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make kbdfans/kbd8x:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kbdfans/kbd8x/rules.mk b/keyboards/kbdfans/kbd8x/rules.mk
new file mode 100644
index 0000000000..be75775641
--- /dev/null
+++ b/keyboards/kbdfans/kbd8x/rules.mk
@@ -0,0 +1,69 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
diff --git a/keyboards/kbdfans/readme.md b/keyboards/kbdfans/readme.md
new file mode 100644
index 0000000000..1ba5ed3d11
--- /dev/null
+++ b/keyboards/kbdfans/readme.md
@@ -0,0 +1,17 @@
+# KBDFans
+
+KBDfans is a keyboard retailer located in China.
+
+## Online Stores
+
+**Website:** https://kbdfans.cn/
+**AliExpress:** https://kbdfans.aliexpress.com/
+**eBay:** https://www.ebay.com/str/KBDfans/
+**Taobao:** https://yikewaishe.taobao.com/
+
+## Social Media
+
+**Discord:** https://discord.gg/HMZKDhn
+**Facebook:** https://www.facebook.com/KBDfanskeyboard/
+**Instagram:** https://www.instagram.com/kbdfans.cn/
+