diff options
Diffstat (limited to 'keyboards/kakunpc')
19 files changed, 2 insertions, 388 deletions
diff --git a/keyboards/kakunpc/angel17/alpha/config.h b/keyboards/kakunpc/angel17/alpha/config.h index 5e2ddc5668..a50bdf941c 100644 --- a/keyboards/kakunpc/angel17/alpha/config.h +++ b/keyboards/kakunpc/angel17/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -44,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -67,9 +62,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -81,27 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/angel17/alpha/rules.mk b/keyboards/kakunpc/angel17/alpha/rules.mk index 4ee22403e9..eae129b29b 100644 --- a/keyboards/kakunpc/angel17/alpha/rules.mk +++ b/keyboards/kakunpc/angel17/alpha/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = numpad_5x4 diff --git a/keyboards/kakunpc/angel17/info.json b/keyboards/kakunpc/angel17/info.json index f3532f8fb6..1520131035 100644 --- a/keyboards/kakunpc/angel17/info.json +++ b/keyboards/kakunpc/angel17/info.json @@ -8,6 +8,7 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "community_layouts": ["numpad_5x4"], "layouts": { "LAYOUT_numpad_5x4": { "layout": [ diff --git a/keyboards/kakunpc/angel17/rev1/config.h b/keyboards/kakunpc/angel17/rev1/config.h index 0817334599..4859ddcd41 100644 --- a/keyboards/kakunpc/angel17/rev1/config.h +++ b/keyboards/kakunpc/angel17/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -39,10 +38,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 17 @@ -62,9 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -76,27 +68,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/angel17/rev1/rules.mk b/keyboards/kakunpc/angel17/rev1/rules.mk index d0813eb5c3..dfe92e1658 100644 --- a/keyboards/kakunpc/angel17/rev1/rules.mk +++ b/keyboards/kakunpc/angel17/rev1/rules.mk @@ -16,5 +16,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = numpad_5x4 diff --git a/keyboards/kakunpc/angel17/rules.mk b/keyboards/kakunpc/angel17/rules.mk index 35c999d465..9619326877 100644 --- a/keyboards/kakunpc/angel17/rules.mk +++ b/keyboards/kakunpc/angel17/rules.mk @@ -17,6 +17,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -LAYOUTS = numpad_5x4 - DEFAULT_FOLDER = kakunpc/angel17/rev1 diff --git a/keyboards/kakunpc/angel64/alpha/config.h b/keyboards/kakunpc/angel64/alpha/config.h index b3476e3839..cd907d0511 100644 --- a/keyboards/kakunpc/angel64/alpha/config.h +++ b/keyboards/kakunpc/angel64/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -35,10 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 64 @@ -68,11 +63,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -84,27 +74,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/angel64/rev1/config.h b/keyboards/kakunpc/angel64/rev1/config.h index b3476e3839..cd907d0511 100644 --- a/keyboards/kakunpc/angel64/rev1/config.h +++ b/keyboards/kakunpc/angel64/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 12 @@ -35,10 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 64 @@ -68,11 +63,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -84,27 +74,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/business_card/alpha/config.h b/keyboards/kakunpc/business_card/alpha/config.h index afc05e4048..ea5caa4948 100644 --- a/keyboards/kakunpc/business_card/alpha/config.h +++ b/keyboards/kakunpc/business_card/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 2 @@ -44,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 6 @@ -61,9 +56,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -75,27 +67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/business_card/beta/config.h b/keyboards/kakunpc/business_card/beta/config.h index a9466074a8..3bcc520dad 100644 --- a/keyboards/kakunpc/business_card/beta/config.h +++ b/keyboards/kakunpc/business_card/beta/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 3 @@ -44,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 6 @@ -61,9 +56,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -75,27 +67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/choc_taro/config.h b/keyboards/kakunpc/choc_taro/config.h index d8c4d02e51..6d70f5d11b 100644 --- a/keyboards/kakunpc/choc_taro/config.h +++ b/keyboards/kakunpc/choc_taro/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 16 @@ -40,10 +39,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN // #define RGBLED_NUM 16 @@ -63,9 +58,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -77,27 +69,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/rabbit_capture_plan/config.h b/keyboards/kakunpc/rabbit_capture_plan/config.h index 9298578293..8c0448608b 100644 --- a/keyboards/kakunpc/rabbit_capture_plan/config.h +++ b/keyboards/kakunpc/rabbit_capture_plan/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 10 @@ -44,10 +43,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_SPLIT {32, 37} @@ -78,9 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -92,27 +84,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/suihankey/alpha/config.h b/keyboards/kakunpc/suihankey/alpha/config.h index 3a9e384d89..6d09a5ad9e 100644 --- a/keyboards/kakunpc/suihankey/alpha/config.h +++ b/keyboards/kakunpc/suihankey/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 4 @@ -45,10 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define SPLIT_HAND_PIN D2 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 18 @@ -72,9 +67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -86,27 +78,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/suihankey/rev1/config.h b/keyboards/kakunpc/suihankey/rev1/config.h index d24e9b7dbb..777cea1b4c 100644 --- a/keyboards/kakunpc/suihankey/rev1/config.h +++ b/keyboards/kakunpc/suihankey/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -45,10 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define SPLIT_HAND_PIN D2 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 18 @@ -72,9 +67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -86,27 +78,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/suihankey/split/alpha/config.h b/keyboards/kakunpc/suihankey/split/alpha/config.h index 77a78982c6..f4a890efa3 100644 --- a/keyboards/kakunpc/suihankey/split/alpha/config.h +++ b/keyboards/kakunpc/suihankey/split/alpha/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 8 @@ -46,10 +45,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define SPLIT_HAND_PIN D2 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 18 @@ -63,9 +58,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -77,27 +69,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/suihankey/split/info.json b/keyboards/kakunpc/suihankey/split/info.json index c440c905fa..43675197d0 100644 --- a/keyboards/kakunpc/suihankey/split/info.json +++ b/keyboards/kakunpc/suihankey/split/info.json @@ -8,6 +8,7 @@ "pid": "0x0000", "device_version": "0.0.1" }, + "community_layouts": ["split_3x5_3"], "layouts": { "LAYOUT_split_3x5_3": { "layout": [ diff --git a/keyboards/kakunpc/suihankey/split/rev1/config.h b/keyboards/kakunpc/suihankey/split/rev1/config.h index 78dbb3e8d1..13d48f4cda 100644 --- a/keyboards/kakunpc/suihankey/split/rev1/config.h +++ b/keyboards/kakunpc/suihankey/split/rev1/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 10 @@ -46,10 +45,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 #define SPLIT_HAND_PIN D2 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 18 @@ -73,9 +68,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -87,27 +79,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ diff --git a/keyboards/kakunpc/suihankey/split/rev1/rules.mk b/keyboards/kakunpc/suihankey/split/rev1/rules.mk index d3661099d0..1e3cebb145 100644 --- a/keyboards/kakunpc/suihankey/split/rev1/rules.mk +++ b/keyboards/kakunpc/suihankey/split/rev1/rules.mk @@ -1,2 +1 @@ RGBLIGHT_ENABLE = yes -LAYOUTS = split_3x5_3 diff --git a/keyboards/kakunpc/thedogkeyboard/config.h b/keyboards/kakunpc/thedogkeyboard/config.h index d6b027ff32..c94a944795 100644 --- a/keyboards/kakunpc/thedogkeyboard/config.h +++ b/keyboards/kakunpc/thedogkeyboard/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 20 @@ -41,10 +40,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - #define RGB_DI_PIN D3 #ifdef RGB_DI_PIN #define RGBLED_NUM 111 @@ -64,9 +59,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -78,27 +70,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define GRAVE_ESC_CTRL_OVERRIDE /* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* * Feature disable options * These options are also useful to firmware size reduction. */ |