3 files changed, 5 insertions, 53 deletions
diff --git a/keyboards/kagizaraya/scythe/config.h b/keyboards/kagizaraya/scythe/config.h
index ddb51b8114..ba2c696cb9 100644
--- a/keyboards/kagizaraya/scythe/config.h
+++ b/keyboards/kagizaraya/scythe/config.h
@@ -16,11 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 7
 
 /*
  * Keyboard Matrix Assignments
@@ -35,14 +30,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { F7, F6, F5, F4, D5 }
 #define MATRIX_COL_PINS { D6, D7, B4, B5, B6, C6, C7 }
 
-#define SOFT_SERIAL_PIN D0
-
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
 
 #define RGBLIGHT_SPLIT 1
 #define RGB_DI_PIN F0
@@ -63,45 +54,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -118,10 +75,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
-
 /* Serial settings */
 //#define EE_HANDS
 #define I2C_MASTER_LEFT
diff --git a/keyboards/kagizaraya/scythe/info.json b/keyboards/kagizaraya/scythe/info.json
index 8b91a851ec..1df3883ff2 100644
--- a/keyboards/kagizaraya/scythe/info.json
+++ b/keyboards/kagizaraya/scythe/info.json
@@ -8,6 +8,11 @@
         "pid": "0x3941",
         "device_version": "0.0.1"
     },
+    "split": {
+        "soft_serial_pin": "D0"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [{"label":"Esc", "x":2, "y":0}, {"label":"1", "x":3, "y":0}, {"label":"2", "x":4, "y":0}, {"label":"3", "x":5, "y":0}, {"label":"4", "x":6, "y":0}, {"label":"5", "x":7, "y":0}, {"label":"_", "x":8, "y":0}, {"label":"+", "x":9.5, "y":0}, {"label":"6", "x":10.5, "y":0}, {"label":"7", "x":11.5, "y":0}, {"label":"8", "x":12.5, "y":0}, {"label":"9", "x":13.5, "y":0}, {"label":"0", "x":14.5, "y":0}, {"label":"\\", "x":15.5, "y":0}, {"label":"Tab", "x":1.25, "y":1, "w":1.5}, {"label":"Q", "x":2.75, "y":1}, {"label":"W", "x":3.75, "y":1}, {"label":"E", "x":4.75, "y":1}, {"label":"R", "x":5.75, "y":1}, {"label":"T", "x":6.75, "y":1}, {"label":"{", "x":7.75, "y":1}, {"label":"}", "x":9.75, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"Backace", "x":15.75, "y":1, "w":1.5}, {"label":"Control", "x":0.75, "y":2, "w":1.75}, {"label":"A", "x":2.5, "y":2}, {"label":"S", "x":3.5, "y":2}, {"label":"D", "x":4.5, "y":2}, {"label":"F", "x":5.5, "y":2}, {"label":"G", "x":6.5, "y":2}, {"label":"~", "x":7.5, "y":2}, {"label":"\"", "x":10, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"Return", "x":16, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"Caps", "x":7.25, "y":3}, {"label":"Del", "x":10.25, "y":3}, {"label":"N", "x":11.25, "y":3}, {"label":"M", "x":12.25, "y":3}, {"label":"<", "x":13.25, "y":3}, {"label":">", "x":14.25, "y":3}, {"label":"?", "x":15.25, "y":3}, {"label":"Shift", "x":16.25, "y":3, "w":1.75}, {"label":"Fn", "x":18, "y":3}, {"label":"", "x":2.75, "y":4, "w":1.25}, {"label":"", "x":4, "y":4, "w":1.25}, {"label":"Fn", "x":5.25, "y":4, "w":1.25}, {"x":6.5, "y":4, "w":2}, {"x":10, "y":4, "w":2}, {"label":"Fn", "x":12, "y":4, "w":1.25}, {"label":"", "x":13.25, "y":4, "w":1.25}, {"label":"", "x":14.5, "y":4, "w":1.25}]
diff --git a/keyboards/kagizaraya/scythe/rules.mk b/keyboards/kagizaraya/scythe/rules.mk
index 174790a3e9..aa7fc332fe 100644
--- a/keyboards/kagizaraya/scythe/rules.mk
+++ b/keyboards/kagizaraya/scythe/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #