diff options
Diffstat (limited to 'keyboards/jm60/config.h')
| -rw-r--r-- | keyboards/jm60/config.h | 114 |
1 files changed, 92 insertions, 22 deletions
diff --git a/keyboards/jm60/config.h b/keyboards/jm60/config.h index f490037f6e..2409142e09 100644 --- a/keyboards/jm60/config.h +++ b/keyboards/jm60/config.h @@ -15,39 +15,105 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6464 +#define DEVICE_VER 0x0001 #define MANUFACTURER JMWS -#define PRODUCT JM60 RGB Keyboard(QMK) -#define DESCRIPTION QMK keyboard firmware for JM60 RGB Keyboard +#define PRODUCT JM60 /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 14 -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 1 - -//#define LED_BRIGHTNESS_LO 100 -//#define LED_BRIGHTNESS_HI 255 - -/* define if matrix has ghost */ +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B11, B10, B2, B1, B0 } +#define MATRIX_COL_PINS { A15, C10, C11, C12, D2, B3, B4, B5, B6, B7, B8, B9, A2, A3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE - +#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + /* * Feature disable options * These options are also useful to firmware size reduction. @@ -63,7 +129,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION -#endif +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 |