summaryrefslogtreecommitdiff
path: root/keyboards/jd45
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/jd45')
-rw-r--r--keyboards/jd45/Makefile71
-rw-r--r--keyboards/jd45/config.h82
-rw-r--r--keyboards/jd45/jd45.c1
-rw-r--r--keyboards/jd45/jd45.h20
-rw-r--r--keyboards/jd45/keymaps/default/keymap.c17
-rw-r--r--keyboards/jd45/keymaps/justin/keymap.c86
6 files changed, 277 insertions, 0 deletions
diff --git a/keyboards/jd45/Makefile b/keyboards/jd45/Makefile
new file mode 100644
index 0000000000..75d544f16a
--- /dev/null
+++ b/keyboards/jd45/Makefile
@@ -0,0 +1,71 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+MIDI_ENABLE ?= YES # MIDI controls
+# UNICODE_ENABLE ?= YES # Unicode
+BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifndef QUANTUM_DIR
+ include ../../Makefile
+endif
diff --git a/keyboards/jd45/config.h b/keyboards/jd45/config.h
new file mode 100644
index 0000000000..ee989b7b41
--- /dev/null
+++ b/keyboards/jd45/config.h
@@ -0,0 +1,82 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER geekhack
+#define PRODUCT JD45
+#define DESCRIPTION q.m.k. keyboard firmware for JD45
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+/* Planck PCB default pin-out */
+#define MATRIX_ROW_PINS { F0, F1, F5, B4 }
+#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B7
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+#define NO_DEBUG
+
+/* disable print */
+#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/jd45/jd45.c b/keyboards/jd45/jd45.c
new file mode 100644
index 0000000000..00c5810479
--- /dev/null
+++ b/keyboards/jd45/jd45.c
@@ -0,0 +1 @@
+#include "jd45.h" \ No newline at end of file
diff --git a/keyboards/jd45/jd45.h b/keyboards/jd45/jd45.h
new file mode 100644
index 0000000000..04ac6649e7
--- /dev/null
+++ b/keyboards/jd45/jd45.h
@@ -0,0 +1,20 @@
+#ifndef JD45_H
+#define JD45_H
+
+#include "quantum.h"
+
+/* JD45 keymap definition macro
+ */
+#define KEYMAP( \
+ K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \
+ K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \
+ K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \
+ K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \
+) { \
+ { KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K10, KC_##K11, KC_##K12, KC_##K13 }, \
+ { KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_NO }, \
+ { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_NO }, \
+ { KC_##K38, KC_##K39, KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_##K43, KC_NO, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_NO } \
+}
+
+#endif
diff --git a/keyboards/jd45/keymaps/default/keymap.c b/keyboards/jd45/keymaps/default/keymap.c
new file mode 100644
index 0000000000..95abb1505c
--- /dev/null
+++ b/keyboards/jd45/keymaps/default/keymap.c
@@ -0,0 +1,17 @@
+#include "jd45.h"
+
+/* this keymap is to provide a basic keyboard layout for testing the matrix
+ * for more practical and complicated keymap refer to other keymaps in the same folder
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(
+ ESC, Q, W, E, R, T, Y, U, I, O, P, QUOT, BSPC,
+ TAB, A, S, D, F, G, H, J, K, L, SCLN, ENT,
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,
+ PAUSE, LCTL, LALT, DEL, SPC, DEL, LEFT, UP, DOWN, RIGHT ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
diff --git a/keyboards/jd45/keymaps/justin/keymap.c b/keyboards/jd45/keymaps/justin/keymap.c
new file mode 100644
index 0000000000..c278abba55
--- /dev/null
+++ b/keyboards/jd45/keymaps/justin/keymap.c
@@ -0,0 +1,86 @@
+#include "jd45.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(
+ ESC, Q, W, F, P, G, J, L, U, Y, SCLN, QUOT, BSPC,
+ FN8, A, R, S, T, D, H, N, E, I, O, ENT,
+ LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, FN6,
+ FN4, LGUI, FN7, FN2, FN1, SPC, FN5, RALT, FN3, FN0 ),
+[1] = KEYMAP(
+ TRNS, FN10, FN11, FN12, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, DEL,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGUP, LEFT, RGHT,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, END, PGDN, DOWN, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ),
+[2] = KEYMAP(
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, 7, 8, 9, 0, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC, 4, 5, 6, DOT, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RBRC, 1, 2, 3, BSLS, TRNS,
+ TRNS,FN29, TRNS, TRNS, TRNS, PAUSE, EQL, MINS, TRNS, TRNS ),
+[3] = KEYMAP(
+ TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ),
+[4] = KEYMAP(
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, 7, 8, 9, 0, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC, 4, 5, 6, DOT, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RBRC, 1, 2, 3, BSLS, TRNS,
+ TRNS,FN29, TRNS, TRNS, TRNS, PAUSE, EQL, MINS, TRNS, TRNS ),
+};
+
+enum macro_id {
+ PSWD1,
+ PSWD2,
+ PSWD3,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_MINS),
+ [1] = ACTION_LAYER_MOMENTARY(1), // FN1
+ [2] = ACTION_LAYER_MOMENTARY(2), // FN2
+ [3] = ACTION_LAYER_MOMENTARY(3), // FN3
+ [4] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_GRV),
+ [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_RGUI),
+ [6] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_CAPS),
+ [7] = ACTION_LAYER_MODS(4, MOD_LSFT), // FN4
+ [8] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_TAB),
+
+ [10] = ACTION_MACRO(PSWD1),
+ [11] = ACTION_MACRO(PSWD2),
+ [12] = ACTION_MACRO(PSWD3),
+
+ [29] = ACTION_BACKLIGHT_TOGGLE(),
+ [30] = ACTION_BACKLIGHT_INCREASE(),
+ [31] = ACTION_BACKLIGHT_DECREASE()
+
+};
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ switch (id) {
+ case PSWD1:
+ return (record->event.pressed ?
+ MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
+ MACRO_NONE );
+ case PSWD2:
+ return (record->event.pressed ?
+ MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
+ MACRO_NONE );
+ case PSWD3:
+ return (record->event.pressed ?
+ MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
+ MACRO_NONE );
+ //case VOLUP:
+ // return (record->event.pressed ?
+ // MACRO( D(VOLU), U(VOLU), END ) :
+ // MACRO_NONE );
+ //case ALT_TAB:
+ // return (record->event.pressed ?
+ // MACRO( D(LALT), D(TAB), END ) :
+ // MACRO( U(TAB), END ));
+ }
+ return MACRO_NONE;
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-06 07:24:56 +0000