summaryrefslogtreecommitdiff
path: root/keyboards/jae
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/jae')
-rw-r--r--keyboards/jae/j01/config.h38
-rw-r--r--keyboards/jae/j01/info.json2
-rw-r--r--keyboards/jae/j01/rules.mk6
3 files changed, 2 insertions, 44 deletions
diff --git a/keyboards/jae/j01/config.h b/keyboards/jae/j01/config.h
index 4f94a69603..649d08e072 100644
--- a/keyboards/jae/j01/config.h
+++ b/keyboards/jae/j01/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -40,52 +39,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
#define BACKLIGHT_PIN B7
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 4
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/jae/j01/info.json b/keyboards/jae/j01/info.json
index 94363e3aa5..e5617e0193 100644
--- a/keyboards/jae/j01/info.json
+++ b/keyboards/jae/j01/info.json
@@ -8,6 +8,8 @@
"pid": "0x0143",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
"layouts": {
"LAYOUT_ansi": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0}, {"x":16.5, "y":0}, {"x":18, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2.5, "y":1, "w":1.5}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":16, "y":1, "w":1.5}, {"x":18, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2.5, "y":2, "w":1.75}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"x":11.25, "y":2}, {"x":12.25, "y":2}, {"x":13.25, "y":2}, {"x":14.25, "y":2}, {"x":15.25, "y":2, "w":2.25}, {"x":18, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2.5, "y":3, "w":2.25}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3}, {"x":14.75, "y":3, "w":1.75}, {"x":16.75, "y":3.25}, {"x":18, "y":3}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":1.25}, {"x":6.25, "y":4, "w":6.25}, {"x":12.5, "y":4, "w":1.5}, {"x":14, "y":4, "w":1.5}, {"x":15.75, "y":4.25}, {"x":16.75, "y":4.25}, {"x":17.75, "y":4.25}]
diff --git a/keyboards/jae/j01/rules.mk b/keyboards/jae/j01/rules.mk
index 983fcface1..8dea375783 100644
--- a/keyboards/jae/j01/rules.mk
+++ b/keyboards/jae/j01/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#