diff options
Diffstat (limited to 'keyboards/infinity60')
24 files changed, 0 insertions, 1677 deletions
diff --git a/keyboards/infinity60/chconf.h b/keyboards/infinity60/chconf.h deleted file mode 100644 index 3f1f9a8d76..0000000000 --- a/keyboards/infinity60/chconf.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confmigrate -i keyboards/infinity60/chconf.h -r platforms/chibios/common/configs/chconf.h` - */ - -#pragma once - -#define CH_CFG_ST_TIMEDELTA 0 - -#define CH_CFG_TIME_QUANTUM 20 - -#define CH_CFG_USE_MAILBOXES TRUE - -#include_next <chconf.h> - diff --git a/keyboards/infinity60/config.h b/keyboards/infinity60/config.h deleted file mode 100644 index e73a663b39..0000000000 --- a/keyboards/infinity60/config.h +++ /dev/null @@ -1,61 +0,0 @@ -/* -Copyright 2015 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x1C11 -#define PRODUCT_ID 0xB04D -#define DEVICE_VER 0x0001 -#define MANUFACTURER Input Club -#define PRODUCT Infinity 60% (QMK) - -/* key matrix size */ -#define MATRIX_ROWS 7 -#define MATRIX_COLS 9 - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/infinity60/halconf.h b/keyboards/infinity60/halconf.h deleted file mode 100644 index f2a330b416..0000000000 --- a/keyboards/infinity60/halconf.h +++ /dev/null @@ -1,27 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confmigrate -i keyboards/infinity60/halconf.h -r platforms/chibios/common/configs/halconf.h` - */ - -#pragma once - -#define HAL_USE_I2C TRUE - -#include_next <halconf.h> - diff --git a/keyboards/infinity60/infinity60.c b/keyboards/infinity60/infinity60.c deleted file mode 100644 index 73751140ea..0000000000 --- a/keyboards/infinity60/infinity60.c +++ /dev/null @@ -1,18 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "infinity60.h" diff --git a/keyboards/infinity60/infinity60.h b/keyboards/infinity60/infinity60.h deleted file mode 100644 index ac1470d5f6..0000000000 --- a/keyboards/infinity60/infinity60.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2014 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "quantum.h" - -#define LAYOUT_60_ansi_split_bs_rshift( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k10, k11, k12, k13, k14, k15, \ - k16, k17, k18, k20, k21, k22, k23, k24, k25, k26, k27, k28, k30, k31, \ - k32, k33, k34, k35, k36, k37, k38, k40, k41, k42, k43, k44, k45, \ - k46, k47, k48, k50, k51, k52, k53, k54, k55, k56, k57, k58, k60, \ - k61, k62, k63, k64, k65, k66, k67, k68 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38 }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48 }, \ - { k50, k51, k52, k53, k54, k55, k56, k57, k58 }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68 } \ -} diff --git a/keyboards/infinity60/info.json b/keyboards/infinity60/info.json deleted file mode 100644 index 3fbd8b1b25..0000000000 --- a/keyboards/infinity60/info.json +++ /dev/null @@ -1,78 +0,0 @@ -{ - "keyboard_name": "Infinity 60%", - "url": "https://input.club/devices/infinity-keyboard/", - "maintainer": "qmk", - "layouts": { - "LAYOUT_60_ansi_split_bs_rshift": { - "layout": [ - {"x": 0, "y": 0}, - {"x": 1, "y": 0}, - {"x": 2, "y": 0}, - {"x": 3, "y": 0}, - {"x": 4, "y": 0}, - {"x": 5, "y": 0}, - {"x": 6, "y": 0}, - {"x": 7, "y": 0}, - {"x": 8, "y": 0}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0}, - {"x": 11, "y": 0}, - {"x": 12, "y": 0}, - {"x": 13, "y": 0}, - {"x": 14, "y": 0}, - - {"x": 0, "y": 1, "w": 1.5}, - {"x": 1.5, "y": 1}, - {"x": 2.5, "y": 1}, - {"x": 3.5, "y": 1}, - {"x": 4.5, "y": 1}, - {"x": 5.5, "y": 1}, - {"x": 6.5, "y": 1}, - {"x": 7.5, "y": 1}, - {"x": 8.5, "y": 1}, - {"x": 9.5, "y": 1}, - {"x": 10.5, "y": 1}, - {"x": 11.5, "y": 1}, - {"x": 12.5, "y": 1}, - {"x": 13.5, "y": 1, "w": 1.5}, - - {"x": 0, "y": 2, "w": 1.75}, - {"x": 1.75, "y": 2}, - {"x": 2.75, "y": 2}, - {"x": 3.75, "y": 2}, - {"x": 4.75, "y": 2}, - {"x": 5.75, "y": 2}, - {"x": 6.75, "y": 2}, - {"x": 7.75, "y": 2}, - {"x": 8.75, "y": 2}, - {"x": 9.75, "y": 2}, - {"x": 10.75, "y": 2}, - {"x": 11.75, "y": 2}, - {"x": 12.75, "y": 2, "w": 2.25}, - - {"x": 0, "y": 3, "w": 2.25}, - {"x": 2.25, "y": 3}, - {"x": 3.25, "y": 3}, - {"x": 4.25, "y": 3}, - {"x": 5.25, "y": 3}, - {"x": 6.25, "y": 3}, - {"x": 7.25, "y": 3}, - {"x": 8.25, "y": 3}, - {"x": 9.25, "y": 3}, - {"x": 10.25, "y": 3}, - {"x": 11.25, "y": 3}, - {"x": 12.25, "y": 3, "w": 1.75}, - {"x": 14, "y": 3}, - - {"x": 0, "y": 4, "w": 1.5}, - {"x": 1.5, "y": 4}, - {"x": 2.5, "y": 4, "w": 1.5}, - {"x": 4, "y": 4, "w": 6}, - {"x": 10, "y": 4, "w": 1.5}, - {"x": 11.5, "y": 4}, - {"x": 12.5, "y": 4}, - {"x": 13.5, "y": 4, "w": 1.5} - ] - } - } -} diff --git a/keyboards/infinity60/keymaps/default/keymap.c b/keyboards/infinity60/keymaps/default/keymap.c deleted file mode 100644 index 334c24e29e..0000000000 --- a/keyboards/infinity60/keymaps/default/keymap.c +++ /dev/null @@ -1,45 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ - * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ - * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ Bspc│ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │ Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ - * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ Fn│ - * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴┬───┬─┴───┤ - * │ │GUI│ Alt │ │ Alt │GUI│ │ │ - * └─────┴───┴─────┴───────────────────────┴─────┴───┴───┴─────┘ - */ - [0] = LAYOUT_60_ansi_split_bs_rshift( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), - XXXXXXX, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, XXXXXXX, XXXXXXX - ), - - /* - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ - * │Pwr│F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│Ins│Del│ - * ├───┴─┬─┴───┴───┴───┴───┴───┴───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴───┘ - * │Caps │ │ │ │ │ │ │ │PSc│Slk│Pse│ ↑ │ │ │ - * └─────┘┌───┬───┬───┐──┴┬──┴┌───┬──┴┬──┴┬──┴┬──┴┬──┴┬────────┐ - * │ │Vl-│Vl+│Mut│ │ │ * │ / │Hom│PgU│ ← │ → │ Enter │ - * ├──────└─┬─┴───┴───┘─┬─┴─┬─└─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┘ - * │ │ │ │ │ │ │ + │ - │End│PgD│ ↓ │ │ │ - * ├─────┬──┴┬──┴──┬┴───┴───┴───└───┴───┴───┴───┴───┘┬───┬─┴───┤ - * │ │ │ │ │ │ │ │ │ - * └─────┴───┴─────┴───────────────────────┴─────┴───┴───┴─────┘ - */ - [1] = LAYOUT_60_ansi_split_bs_rshift( - KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, _______, - _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, - _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/infinity60/keymaps/depariel/keymap.c b/keyboards/infinity60/keymaps/depariel/keymap.c deleted file mode 100755 index 22d74b866b..0000000000 --- a/keyboards/infinity60/keymaps/depariel/keymap.c +++ /dev/null @@ -1,87 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Bksp| - * |-----------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| - * |-----------------------------------------------------------' - * |Fn2 |Gui |Alt | Space |RAlt|Prv|PlPs|Next| - * `-----------------------------------------------------------' - */ - [0] = LAYOUT_60_ansi_split_bs_rshift( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, LT(5, KC_ENT), \ - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, MO(4), \ - MO(4), KC_LGUI, KC_LALT, LT(3, KC_SPC), KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT), - - /* Layer 1: "Toggle" off SpaceFn for League of Legends - */ - [1] = LAYOUT_60_ansi_split_bs_rshift( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(4), \ - MO(4), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_MPRV, KC_MPLY, KC_MNXT), - - /* Layer 2: "Toggle" off SpaceFn for MapleRoyals - */ - [2] = LAYOUT_60_ansi_split_bs_rshift( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_LSFT, \ - MO(4), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Layer 3: FN layer 1 - */ - [3] = LAYOUT_60_ansi_split_bs_rshift( - KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, \ - KC_NO, KC_BTN1, KC_MS_U, KC_BTN2, LALT(KC_F4), KC_HOME, KC_PGUP, KC_PSCR, KC_SLCK, KC_UP, KC_NO, KC_LPRN, KC_RPRN, KC_DEL, \ - MO(6), KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_END, KC_PGDN, KC_TILD, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, \ - LGUI(KC_SPC), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_CALC, KC_MENU, KC_TRNS, TG(4), \ - KC_TRNS, KC_TRNS, KC_TRNS, LT(3, KC_SPC), KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU), - - /* Layer 4: FN layer 2 - */ - [4] = LAYOUT_60_ansi_split_bs_rshift( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PMNS, KC_PPLS, KC_PSLS, TG(2), \ - KC_CAPS, KC_NO, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_NO, KC_P7, KC_P8, KC_P9, KC_PAST, KC_BSPC, \ - KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P4, KC_P5, KC_P6, KC_PENT, \ - KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P1, KC_P2, KC_P3, KC_RSFT, MO(4), \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0, KC_PDOT, KC_NO, TG(1)), - - /* Layer 5: FN layer 3 - */ - [5] = LAYOUT_60_ansi_split_bs_rshift( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_TAB , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F13, KC_F14, KC_F15, KC_F16, KC_NO, KC_TRNS, \ - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F17, KC_F18, KC_F19, KC_F20, LT(5, KC_ENT), \ - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F21, KC_F22, KC_F23, KC_F24, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_NO, KC_NO, KC_NO), - - /* Layer 6: FN layer 4 - */ - [6] = LAYOUT_60_ansi_split_bs_rshift( - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - LCTL(LSFT(KC_TAB)), KC_NO, LGUI(KC_UP), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - MO(6), LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ - KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO), -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - -}; diff --git a/keyboards/infinity60/keymaps/hasu/keymap.c b/keyboards/infinity60/keymaps/hasu/keymap.c deleted file mode 100644 index be14c1b977..0000000000 --- a/keyboards/infinity60/keymaps/hasu/keymap.c +++ /dev/null @@ -1,110 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| `|BSp| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| - * |-----------------------------------------------------------' - * | |Gui|Alt | Space |Alt |Gui| | | - * `-----------------------------------------------------------' - */ - [0] = LAYOUT_60_ansi_split_bs_rshift( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(3, KC_SCLN), KC_QUOT, MT(KC_RCTL, KC_ENT), - OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, LT(2, KC_SLSH), KC_RSFT, TG(1), - KC_NO, KC_LGUI, KC_LALT, LT(4, KC_SPC), MO(4), KC_RGUI, KC_NO, KC_NO - ), - - /* Layer 1: HHKB mode (HHKB Fn) - * ,-----------------------------------------------------------. - * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs| - * |-----------------------------------------------------------| - * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | - * |-----------------------------------------------------------| - * | | | | | | | +| -|End|PgD|Dow| | | - * `-----------------------------------------------------------' - * | |Gui|Alt | Space |Alt |Gui| | | - * `-----------------------------------------------------------' - */ - [1] = LAYOUT_60_ansi_split_bs_rshift( - KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS,KC_BSPC, - KC_LCTL,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_ENT, - KC_LSFT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS, - KC_TRNS,KC_LGUI,KC_LALT, KC_TRNS, KC_RALT,KC_RGUI,KC_TRNS,KC_TRNS - ), - - /* Layer 2: Vi mode[Slash] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs| - * |-----------------------------------------------------------| - * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return | - * |-----------------------------------------------------------| - * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | | - * `-----------------------------------------------------------' - * |Gui|Alt | Space |Alt |Gui| - * `-------------------------------------------' - */ - [2] = LAYOUT_60_ansi_split_bs_rshift( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_TAB, KC_HOME,KC_PGDN,KC_UP, KC_PGUP,KC_END, KC_HOME,KC_PGDN,KC_PGUP,KC_END, KC_NO, KC_NO, KC_NO, KC_BSPC, - KC_LCTL,KC_NO, KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_LEFT,KC_DOWN,KC_UP, KC_RGHT,KC_NO, KC_NO, KC_ENT, - KC_LSFT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_HOME,KC_PGDN,KC_PGUP,KC_END, LT(2, KC_SLSH), KC_RSFT,KC_TRNS, - KC_TRNS,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_TRNS, KC_TRNS - ), - - /* Layer 3: Mouse mode(IJKL)[Semicolon] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| - * |-----------------------------------------------------------| - * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return | - * |-----------------------------------------------------------| - * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Mb1 |Fn |Fn | - * `--------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - [3] = LAYOUT_60_ansi_split_bs_rshift( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - LALT(KC_TAB), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_MS_U, KC_WH_U, KC_WH_R, ALT_T(KC_LEFT), ALT_T(KC_RGHT),LALT(KC_TAB), - KC_LCTL, KC_ACL0,KC_ACL1,KC_ACL2,KC_ACL2,KC_NO, KC_NO, KC_MS_L,KC_MS_D, KC_MS_R, LT(3, KC_SCLN), KC_NO, KC_ENT, - KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN3,KC_BTN2,KC_BTN1,ALT_T(KC_LEFT), ALT_T(KC_RGHT), KC_NO, KC_RSFT, KC_TRNS, - KC_TRNS, KC_LGUI,KC_LALT, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - /* Layer 4: Mouse mode(IJKL)[Space] - * ,-----------------------------------------------------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| - * |-----------------------------------------------------------| - * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T| - * |-----------------------------------------------------------| - * |Contro|VlD|VlU|VlM| | | |McL|McD|McR|Mb1| |Return | - * |-----------------------------------------------------------| - * |Shift | | | | |Mb3|Mb2|Mb1|A/L|A/R| |Shift | | - * `-----------------------------------------------------------' - * |Gui |Alt | Mb1 |Fn |Fn | - * `--------------------------------------------' - * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel - */ - [4] = LAYOUT_60_ansi_split_bs_rshift( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - LALT(KC_TAB), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L, KC_WH_D, KC_MS_U, KC_WH_U, KC_WH_R, KC_BTN4, KC_BTN5, LALT(KC_TAB), - KC_LCTL, KC_VOLD, KC_VOLU, KC_MUTE, KC_NO, KC_NO, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1, KC_NO, KC_ENT, - KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN3, KC_BTN2, KC_BTN1, ALT_T(KC_LEFT), ALT_T(KC_RGHT), KC_NO, KC_RSFT, KC_NO, - KC_NO, KC_LGUI, KC_LALT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) -}; diff --git a/keyboards/infinity60/keymaps/jpetermans/config.h b/keyboards/infinity60/keymaps/jpetermans/config.h deleted file mode 100644 index 1949a9ad9d..0000000000 --- a/keyboards/infinity60/keymaps/jpetermans/config.h +++ /dev/null @@ -1,6 +0,0 @@ -#pragma once - -//overrides -#undef TAPPING_TOGGLE -#define TAPPING_TOGGLE 2 - diff --git a/keyboards/infinity60/keymaps/jpetermans/keymap.c b/keyboards/infinity60/keymaps/jpetermans/keymap.c deleted file mode 100644 index 3c2e0d4da8..0000000000 --- a/keyboards/infinity60/keymaps/jpetermans/keymap.c +++ /dev/null @@ -1,264 +0,0 @@ -#include QMK_KEYBOARD_H -#include "led_controller.h" - -//Define Layer Names -#define _BASE 0 -#define _NUMPAD 1 -#define _FNAV 2 -#define _MEDIA 3 -#define _TILDE 4 - -//IS31 chip has 8 available led pages, using 0 for all leds and 7 for single toggles -#define max_pages 6 - -enum led_modes { - MODE_ALL, - MODE_GAME, - MODE_SINGLE, - MODE_PAGE, - MODE_FLASH -}; - -enum macro_id { - LED_ALL = SAFE_RANGE, - LED_GAME, - LED_BACKLIGHT, - LED_BRIGHT, - LED_DIM, - LED_SINGLE, - LED_PAGE, - LED_FLASH -}; - -uint8_t current_layer_global = 0; -uint8_t led_mode_global = MODE_SINGLE; -uint8_t backlight_status_global = 1; //init on/off state of backlight -uint32_t led_layer_state = 0; - -/* ================================== - * KEYMAPS - * ==================================*/ - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backs| - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------| - * |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift | - * |-----------------------------------------------------------| - * |Ctrl|Gui |Alt | Space |Alt |Gui | FN | Ctrl | - * `-----------------------------------------------------------' - */ - /* default */ - [_BASE] = LAYOUT_60_ansi_split_bs_rshift( \ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_NO,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, \ - TT(_FNAV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,LM(_TILDE, MOD_LSFT),KC_NO, \ - KC_LCTL, KC_LGUI,KC_LALT, LT(_FNAV, KC_SPC), KC_RALT,TG(_NUMPAD),MO(_MEDIA), KC_RCTL \ - ), - - /* numpad */ - [_NUMPAD] = LAYOUT_60_ansi_split_bs_rshift( \ - _______,_______,_______,_______,_______,_______,_______, KC_P7, KC_P8, KC_P9, KC_PSLS, _______,_______,_______,KC_NO,\ - _______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \ - MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______, \ - _______,_______,_______,_______,_______,_______,_______, KC_P0,KC_COMM,KC_PDOT,KC_PPLS, _______,KC_NO, \ - _______,_______,_______, TO(_BASE), _______,_______,_______,_______ \ - ), - - /* F-, arrow, and media keys */ - [_FNAV] = LAYOUT_60_ansi_split_bs_rshift( \ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_NO,\ - KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL, \ - _______,_______,KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______, \ - _______,KC_APP,KC_BTN1,KC_CALC,_______,_______,KC_END,_______,_______,_______,_______,_______,KC_NO, \ - _______,_______,_______, _______, C(A(KC_DEL)),KC_NLCK,_______,_______ \ - ), - - /* media */ - [_MEDIA] = LAYOUT_60_ansi_split_bs_rshift( \ - _______,LED_SINGLE,LED_PAGE,LED_FLASH,_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\ - _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\ - _______,_______,_______,_______,_______,LED_GAME,_______, _______, _______, _______,_______, _______,_______, \ - _______,_______,LED_ALL ,LED_BRIGHT,LED_DIM,LED_BACKLIGHT,_______, _______, KC_MPRV, KC_MNXT,KC_MSTP, _______,KC_NO, \ - _______,_______,_______, KC_MPLY, _______,_______, _______,_______ \ - ), - /* ~ */ - [_TILDE] = LAYOUT_60_ansi_split_bs_rshift( \ - KC_GRV,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,KC_NO,\ - _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\ - _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______, \ - _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,KC_NO, \ - _______,_______,_______, _______, _______,_______, _______,_______ \ - ), - /* template */ - [5] = LAYOUT_60_ansi_split_bs_rshift( \ - _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,KC_NO,\ - _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\ - _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______, \ - _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,KC_NO, \ - _______,_______,_______, _______, _______,_______, _______,_______ \ - ), -}; - -/* ================================== - * LED MAPPING - * ==================================*/ - -/* - Infinity60 LED MAP - 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27* - 28 31 32 33 34 35 36 37 38 41 42 43 44 45 - 46 47 48 51 52 53 54 55 56 57 58 61 62 - 63 64 65 66 67 68 71 72 73 74 75 76 77* - 78 81 82 83 84 85 86 87 - *Unused in Alphabet Layout -*/ - -//======== full page arrays ========= -//any change in array size needs to be mirrored in matrix_init_user -uint8_t led_numpad[16] = { - 18,21,22,23, - 37,38,41,42, - 55,56,57,58, - 72,73,74,75 -}; -//LED Page 2 - _Nav -uint8_t led_nav[12] = { - 38, - 47,48, 55,56,57, - 64,65,66 -}; -//LED Page 3 - _Media -uint8_t led_media[15] = { - 12,13,14, 23,24,25, - 65,66,67,68, 73,74,75, - 83, 86 -}; -//LED Page 4 - _Game "WASD" -uint8_t led_game[5] = { - 11, - 32, - 47,48,51 -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - msg_t msg; - - switch(keycode) { - case LED_ALL: - if(record->event.pressed) { - led_mode_global = led_mode_global == MODE_ALL ? MODE_SINGLE : MODE_ALL; - msg=TOGGLE_ALL; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - } - return false; - - case LED_BACKLIGHT: - if(record->event.pressed) { - backlight_status_global ^= 1; - msg=(backlight_status_global << 8) | TOGGLE_BACKLIGHT; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - } - return false; - - case LED_GAME: - if(record->event.pressed) { - led_mode_global = led_mode_global == MODE_GAME ? MODE_SINGLE : MODE_GAME; - - msg=(4 << 8) | DISPLAY_PAGE; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - } - return false; - - case LED_BRIGHT: - if(record->event.pressed) { - msg=(1 << 8) | STEP_BRIGHTNESS; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - } - return false; - - case LED_DIM: - if(record->event.pressed) { - msg=(0 << 8) | STEP_BRIGHTNESS; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - } - return false; - - //set led_mode for matrix_scan to toggle leds - case LED_SINGLE: - led_mode_global = MODE_SINGLE; - return false; - case LED_PAGE: - led_mode_global = MODE_PAGE; - return false; - case LED_FLASH: - led_mode_global = MODE_FLASH; - return false; - - } - return true; -} - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - - led_controller_init(); - - // Write predefined led pages. - write_led_page(_NUMPAD, led_numpad, 16); - chThdSleepMilliseconds(10); - - write_led_page(_FNAV, led_nav, 12); - chThdSleepMilliseconds(10); - - write_led_page(_MEDIA, led_media, 15); - chThdSleepMilliseconds(10); - - write_led_page(4, led_game, 5); - chThdSleepMilliseconds(1000); -}; - -// Loops constantly in the background. -void matrix_scan_user(void) { - uint8_t page; - uint8_t led_pin_byte; - msg_t msg; - - if (backlight_status_global == 0) {//backlight is off, skip the rest - return; - } - - if (led_layer_state != layer_state && led_mode_global != MODE_GAME && led_mode_global != MODE_ALL) { - //check mode - //Turn on layer indicator or page depending on mode - switch(led_mode_global) { - case MODE_FLASH: //flash preset page leds then single indicator - page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state); - msg=(page << 8) | DISPLAY_PAGE; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - chThdSleepMilliseconds(500); - //flow to display single layer leds - - case MODE_SINGLE: //light layer indicators for all active layers - led_pin_byte = layer_state & 0xFF; - msg=(7 << 8) | DISPLAY_PAGE; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - msg=(1 << 16) | (led_pin_byte << 8) | SET_FULL_ROW; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - break; - - case MODE_PAGE: //display pre-defined led page - page = biton32(layer_state) > max_pages ? 7 : biton32(layer_state); - msg=(page << 8) | DISPLAY_PAGE; - chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); - break; - } - led_layer_state = layer_state; - } -} diff --git a/keyboards/infinity60/keymaps/jpetermans/readme.md b/keyboards/infinity60/keymaps/jpetermans/readme.md deleted file mode 100644 index 00421015bd..0000000000 --- a/keyboards/infinity60/keymaps/jpetermans/readme.md +++ /dev/null @@ -1,87 +0,0 @@ -Backlight for Infinity60 -======================== - -## Led Controller Specs - -The Infinity60 (revision 1.1a) pcb uses the IS31FL3731C matrix LED driver from ISSI [(datasheet)](http://www.issi.com/WW/pdf/31FL3731C.pdf). The IS31 has the ability to control two led matrices (A & B), each matrix controlling 9 pins, each pin controlling 8 leds. The Infinity only utilizes matrix A. - -Infinity60 LED Map: -digits mean "row" and "col", i.e. 45 means pin 4, column 5 in the IS31 datasheet -```c - 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27* - 28 31 32 33 34 35 36 37 38 41 42 43 44 45 - 46 47 48 51 52 53 54 55 56 57 58 61 62 - 63 64 65 66 67 68 71 72 73 74 75 76 77* - 78 81 82 83 84 85 86 87 -``` -*Unused in Alphabet Layout - -The IS31 includes 8 led pages (or frames) 0-7 than can be displayed, and each page consists of 144 bytes. -- **bytes 0 - 17** - LED control (on/off). - * 18 bytes which alternate between A and B matrices (A1, B1, A2, B2, ..). - * Each byte controls the 8 leds on that pin with bits (8 to 1). -- **bytes 8 - 35** - Blink control. - * Same as LED control above, but sets blink on/off. -- **bytes 36 - 143** - PWM control. - * One byte per LED, sets PWM from 0 to 255. - * Same as above, the register alternates, every 8 *bytes* (not bits) between the A & B matrices. - -## Led Controller Code -In the Infinity60 project folder, led_controller.c sets up ability to write led layers at startup or control leds on demand as part of fn_actions. By default led_controller.c assumes page 0 will be used for full on/off. The remaining 7 pages (1-7) are free for preset led maps or single led actions at init or on demand. Communication with the IS31 is primarily done through the led_mailbox using chMBPost described further below under "Sending messages in Keymap.c". This code is based on work matt3o and flabbergast did for tmk firmware on the [whitefox](https://github.com/tmk/whitefox). - -One function is available to directly set leds without the mailbox: -``` -write_led_page(page#, array of leds by address, # of addresses in array) -``` -This function saves a full page to the controller using a supplied array of led locations such as: -```c -uint8_t led_numpad[16] = { - 18,21,22,23, - 37,38,41,42, - 55,56,57,58, - 72,73,74,75 -} -write_led_page(5, led_numpad, 16); -``` - -Remaining led control is done through the led mailbox using these message types: -- **SET_FULL_ROW** (3 bytes) - message type, 8-bit mask, and row#. Sets all leds on one pin per the bit mask. -- **OFF_LED, ON_LED, TOGGLE_LED** (3 bytes) - message type, led address, and page#. Off/on/toggle specific led. -- **BLINK_OFF_LED, BLINK_ON_LED, BLINK_TOGGLE_LED** (3 bytes) - message type, led address, and page#. Set blink Off/on/toggle for specific led. -- **TOGGLE_ALL** (1 byte) - Turn on/off full backlight. -- **TOGGLE_BACKLIGHT** (2 bytes) - message type, on/off. Sets backlight completely off, no leds will display. -- **DISPLAY_PAGE** (2 bytes) - message type, page to display. Switch to specific pre-set page. -- **RESET_PAGE** (2 bytes) - message type, page to reset. Reset/erase specific page. -- **TOGGLE_NUM_LOCK** (2 bytes) - message type, on/off (NUM_LOCK_LED_ADDRESS). Toggle numlock on/off. Usually run with the `set_leds` function to check state of numlock or capslock. If all leds are on (e.i. TOGGLE_ALL) then this sets numlock to blink instead (this is still a little buggy if toggling on/off quickly). -- **TOGGLE_CAPS_LOCK** (2 bytes) - message type, on/off (CAPS_LOCK_LED_ADDRESS). Same as numlock. -- **STEP_BRIGHTNESS** (2 bytes) - message type, and step up (1) or step down (0). Increase or decrease led brightness. - -## Sending messages in Keymap.c -Sending an action to the led mailbox is done using chMBPost: -``` -chMBPost(&led_mailbox, message, timeout); -``` -- &led_mailbox - pointer to led mailbox -- message - up to 4 bytes but most messages use only 2. First byte (LSB) is the message type, the remaining three bytes are the message to process. -- timeout is TIME_IMMEDIATE - -An example: -```c -//set the message to be sent. First byte (LSB) is the message type, and second is the led address -msg=(42 << 8) | ON_LED; - -//send msg to the led mailbox -chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); -``` - -Another: -```c -msg=(46 << 8) | BLINK_TOGGLE_LED; -chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); -``` - -Finally, SET_FULL_ROW requires an extra byte with row information in the message so sending this message looks like: -```c -msg=(row<<16) | (led_pin_byte << 8) | SET_FULL_ROW; -chMBPost(&led_mailbox, msg, TIME_IMMEDIATE); -``` diff --git a/keyboards/infinity60/led.c b/keyboards/infinity60/led.c deleted file mode 100644 index 8effcea81a..0000000000 --- a/keyboards/infinity60/led.c +++ /dev/null @@ -1,54 +0,0 @@ -/* -Copyright 2015 Jun Wako <wakojun@gmail.com> -Copyright 2017 jpetermans <tibcmhhm@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <hal.h> - -#include "led.h" - -#include "led_controller.h" - -/* WARNING! This function needs to be callable from - * both regular threads and ISRs, unlocked (during resume-from-sleep). - * In particular, I2C functions (interrupt-driven) should NOT be called from here. - */ -void led_set(uint8_t usb_led) { - msg_t msg; - - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - chSysUnconditionalLock(); - msg=(1 << 8) | TOGGLE_NUM_LOCK; - chMBPostI(&led_mailbox, msg); - chSysUnconditionalUnlock(); - } else { - chSysUnconditionalLock(); - msg=(0 << 8) | TOGGLE_NUM_LOCK; - chMBPostI(&led_mailbox, msg); - chSysUnconditionalUnlock(); - } - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - chSysUnconditionalLock(); - msg=(1 << 8) | TOGGLE_CAPS_LOCK; - chMBPostI(&led_mailbox, msg); - chSysUnconditionalUnlock(); - } else { - chSysUnconditionalLock(); - msg=(0 << 8) | TOGGLE_CAPS_LOCK; - chMBPostI(&led_mailbox, msg); - chSysUnconditionalUnlock(); - } -} diff --git a/keyboards/infinity60/led/config.h b/keyboards/infinity60/led/config.h deleted file mode 100644 index 5bd3b590b9..0000000000 --- a/keyboards/infinity60/led/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* -Copyright 2015 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// Keyboard Matrix Assignments -#define MATRIX_ROW_PINS { D1, D2, D3, D4, D5, D6, D7 } -#define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5, C6, C7, D0 } -#define UNUSED_PINS diff --git a/keyboards/infinity60/led/readme.md b/keyboards/infinity60/led/readme.md deleted file mode 100644 index d31335031f..0000000000 --- a/keyboards/infinity60/led/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -## Infinity 60% LED - -This revision is for the version of the infinity 60 with LEDs (rev 1.1a) diff --git a/keyboards/infinity60/led/rules.mk b/keyboards/infinity60/led/rules.mk deleted file mode 100644 index d48f3b73a5..0000000000 --- a/keyboards/infinity60/led/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -# project specific files -SRC += led.c \ - led_controller.c
\ No newline at end of file diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c deleted file mode 100644 index cf3edf20dd..0000000000 --- a/keyboards/infinity60/led_controller.c +++ /dev/null @@ -1,487 +0,0 @@ -/* -Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org> -Copyright 2017 jpetermans <tibcmhhm@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * LED controller code - * IS31FL3731C matrix LED driver from ISSI - * datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf - */ - -#include <ch.h> -#include <hal.h> -#include "print.h" -#include "led.h" -#include "host.h" - -#include "led_controller.h" - -#include "suspend.h" - -#include "usb_main.h" - -/* Infinity60 LED MAP - - digits mean "row" and "col", i.e. 45 means C4-5 in the IS31 datasheet, matrix A - - 11 12 13 14 15 16 17 18 21 22 23 24 25 26 27* - 28 31 32 33 34 35 36 37 38 41 42 43 44 45 - 46 47 48 51 52 53 54 55 56 57 58 61 62 - 63 64 65 66 67 68 71 72 73 74 75 76 77* - 78 81 82 83 84 85 86 87 - -*Unused in Alphabet Layout -*/ - -/* - each page has 0xB4 bytes - 0 - 0x11: LED control (on/off): - order: CA1, CB1, CA2, CB2, .... (CA - matrix A, CB - matrix B) - CAn controls Cn-8 .. Cn-1 (LSbit) - 0x12 - 0x23: blink control (like "LED control") - 0x24 - 0xB3: PWM control: byte per LED, 0xFF max on - order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...) -*/ - -// Which LED should be used for CAPS LOCK indicator -#if !defined(CAPS_LOCK_LED_ADDRESS) -#define CAPS_LOCK_LED_ADDRESS 46 -#endif - -#if !defined(NUM_LOCK_LED_ADDRESS) -#define NUM_LOCK_LED_ADDRESS 85 -#endif - -/* Which LED should breathe during sleep */ -#if !defined(BREATHE_LED_ADDRESS) -#define BREATHE_LED_ADDRESS CAPS_LOCK_LED_ADDRESS -#endif - -/* ================= - * ChibiOS I2C setup - * ================= */ -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -/* ============== - * variables - * ============== */ -// internal communication buffers -uint8_t tx[2] __attribute__((aligned(2))); -uint8_t rx[1] __attribute__((aligned(2))); - -// buffer for sending the whole page at once (used also as a temp buffer) -uint8_t full_page[0xB4+1] = {0}; - -// LED mask (which LEDs are present, selected by bits) -// IC60 pcb uses only CA matrix. -// Each byte is a control pin for 8 leds ordered 8-1 -const uint8_t all_on_leds_mask[0x12] = { - 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, - 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x7F, 0x00, 0x00, 0x00 -}; - -// array to hold brightness pwm steps -const uint8_t pwm_levels[5] = { - 0x00, 0x16, 0x4E, 0xA1, 0xFF -}; - -// array to write to pwm register -uint8_t pwm_register_array[9] = {0}; - - -/* ============================ - * communication functions - * ============================ */ -msg_t is31_select_page(uint8_t page) { - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, TIME_US2I(IS31_TIMEOUT)); -} - -msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size) { - is31_select_page(page); - return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, buffer, size, NULL, 0, TIME_US2I(IS31_TIMEOUT)); -} - -msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data) { - is31_select_page(page); - tx[0] = reg; - tx[1] = data; - return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 2, NULL, 0, TIME_US2I(IS31_TIMEOUT)); -} - -msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) { - is31_select_page(page); - - tx[0] = reg; - return i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, tx, 1, result, 1, TIME_US2I(IS31_TIMEOUT)); -} - -/* ======================== - * initialise the IS31 chip - * ======================== */ -void is31_init(void) { - // just to be sure that it's all zeroes - __builtin_memset(full_page,0,0xB4+1); - // zero function page, all registers (assuming full_page is all zeroes) - is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1); - // disable hardware shutdown - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(GPIOB, 16); - chThdSleepMilliseconds(10); - // software shutdown - is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - chThdSleepMilliseconds(10); - // zero function page, all registers - is31_write_data(IS31_FUNCTIONREG, full_page, 0xD + 1); - chThdSleepMilliseconds(10); - // software shutdown disable (i.e. turn stuff on) - is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - chThdSleepMilliseconds(10); - // zero all LED registers on all 8 pages - uint8_t i; - for(i=0; i<8; i++) { - is31_write_data(i, full_page, 0xB4 + 1); - chThdSleepMilliseconds(5); - } -} - -/* ================== - * LED control thread - * ================== */ -#define LED_MAILBOX_NUM_MSGS 5 -static msg_t led_mailbox_queue[LED_MAILBOX_NUM_MSGS]; -mailbox_t led_mailbox; -static THD_WORKING_AREA(waLEDthread, 256); -static THD_FUNCTION(LEDthread, arg) { - (void)arg; - chRegSetThreadName("LEDthread"); - - uint8_t i; - uint8_t control_register_word[2] = {0};//2 bytes: register address, byte to write - uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes - - //persistent status variables - uint8_t pwm_step_status, page_status, capslock_status, numlock_status; - - //mailbox variables - uint8_t temp, msg_type; - uint8_t msg_args[3]; - msg_t msg; - - // initialize persistent variables - pwm_step_status = 4; //full brightness - page_status = 0; //start frame 0 (all off/on) - numlock_status = (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? 1 : 0; - capslock_status = (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? 1 : 0; - - while(true) { - // wait for a message (asynchronous) - // (messages are queued (up to LED_MAILBOX_NUM_MSGS) if they can't - // be processed right away - chMBFetchTimeout(&led_mailbox, &msg, TIME_INFINITE); - msg_type = msg & 0xFF; //first byte is action information - msg_args[0] = (msg >> 8) & 0xFF; - msg_args[1] = (msg >> 16) & 0XFF; - msg_args[2] = (msg >> 24) & 0xFF; - - - switch (msg_type){ - case SET_FULL_ROW: - //write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write - //writes only to currently displayed page - write_led_byte(page_status, msg_args[1], msg_args[0]); - break; - - case OFF_LED: - //on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page - set_led_bit(msg_args[1], control_register_word, msg_args[0], 0); - break; - case ON_LED: - set_led_bit(msg_args[1], control_register_word, msg_args[0], 1); - break; - case TOGGLE_LED: - set_led_bit(msg_args[1], control_register_word, msg_args[0], 2); - break; - - case BLINK_OFF_LED: - //on/off/toggle single led, msg_args[0] = row/col of led - set_led_bit(msg_args[1], control_register_word, msg_args[0], 4); - break; - case BLINK_ON_LED: - set_led_bit(msg_args[1], control_register_word, msg_args[0], 5); - break; - case BLINK_TOGGLE_LED: - set_led_bit(msg_args[1], control_register_word, msg_args[0], 6); - break; - - case TOGGLE_ALL: - //turn on/off all leds, msg_args = unused - is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - chThdSleepMilliseconds(5); - is31_read_register(0, 0x00, &temp); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - - led_control_reg[0] = 0; - - //toggle led mask based on current state (temp) - if (temp==0 || page_status > 0) { - __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12); - } else { - __builtin_memset(led_control_reg+1, 0, 0x12); - } - is31_write_data(0, led_control_reg, 0x13); - - if (page_status > 0) { - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0); - - page_status=0; - - //maintain lock leds, reset to off and force recheck to blink of all leds toggled on - numlock_status = 0; - capslock_status = 0; - led_set(host_keyboard_leds()); - } - break; - - case TOGGLE_BACKLIGHT: - //msg_args[0] = on/off - - //populate 9 byte rows to be written to each pin, first byte is register (pin) address - if (msg_args[0] == 1) { - __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8); - } else { - __builtin_memset(pwm_register_array+1, 0, 8); - } - - for(i=0; i<8; i++) { - //first byte is register address, every 0x10 9 bytes is A-matrix pwm pins - pwm_register_array[0] = 0x24 + (i * 0x10); - is31_write_data(0,pwm_register_array,9); - } - break; - - case DISPLAY_PAGE: - //msg_args[0] = page to toggle on - if (page_status != msg_args[0]) { - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]); - page_status = msg_args[0]; - - //maintain lock leds, reset to off and force recheck for new page - numlock_status = 0; - capslock_status = 0; - led_set(host_keyboard_leds()); - } - break; - - case RESET_PAGE: - //led_args[0] = page to reset - led_control_reg[0] = 0; - __builtin_memset(led_control_reg+1, 0, 0x12); - is31_write_data(msg_args[0], led_control_reg, 0x13); - - //repeat for blink register - led_control_reg[0] = 0x12; - is31_write_data(msg_args[0], led_control_reg, 0x13); - break; - - case TOGGLE_NUM_LOCK: - //msg_args[0] = 0 or 1, off/on - if (numlock_status != msg_args[0]) { - set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status); - numlock_status = msg_args[0]; - } - break; - case TOGGLE_CAPS_LOCK: - //msg_args[0] = 0 or 1, off/on - if (capslock_status != msg_args[0]) { - set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status); - capslock_status = msg_args[0]; - } - break; - - case STEP_BRIGHTNESS: - //led_args[0] = step up (1) or down (0) - switch (msg_args[0]) { - case 0: - if (pwm_step_status == 0) { - pwm_step_status = 4; - } else { - pwm_step_status--; - } - break; - - case 1: - if (pwm_step_status == 4) { - pwm_step_status = 0; - } else { - pwm_step_status++; - } - break; - } - - //populate 8 byte arrays to write on each pin - //first byte is register address, every 0x10 9 bytes are A-matrix pwm pins - __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8); - - for(i=0; i<8; i++) { - pwm_register_array[0] = 0x24 + (i * 0x10); - is31_write_data(0,pwm_register_array,9); - } - break; - } - } -} - -/* ============================== - * led processing functions - * ============================== */ - -void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uint8_t action) { - //returns 2 bytes: led control register address and byte to write - //action: 0 - off, 1 - on, 2 - toggle, 4 - blink on, 5 - blink off, 6 - toggle blink - - uint8_t control_reg_addr, column_bit, column_byte, temp, blink_bit; - - //check for valid led address - if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) { - return; - } - - blink_bit = action>>2;//check for blink bit - action &= ~(1<<2); //strip blink bit - - //led_addr tens column is pin#, ones column is bit position in 8-bit mask - control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte - control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register - - is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - chThdSleepMilliseconds(5); - is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte - is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - - column_bit = 1<<(led_addr % 10 - 1); - column_byte = temp; - - switch(action) { - case 0: - column_byte &= ~column_bit; - break; - case 1: - column_byte |= column_bit; - break; - case 2: - column_byte ^= column_bit; - break; - } - - //return word to be written in register - led_control_word[0] = control_reg_addr; - led_control_word[1] = column_byte; - is31_write_data (page, led_control_word, 0x02); -} - -void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) { - uint8_t led_control_word[2] = {0};//register address and on/off byte - - led_control_word[0] = (row - 1 ) * 0x02;// A-matrix is every other byte - led_control_word[1] = led_byte; - is31_write_data(page, led_control_word, 0x02); -} - -void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) { - uint8_t i; - uint8_t pin, col; - uint8_t led_control_register[0x13] = {0}; - - __builtin_memset(led_control_register,0,13); - - for(i=0;i<led_count;i++){ - //shift pin by 1 for led register 0x00 address - pin = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1; - col = user_led_array[i] % 10 - 1; - led_control_register[pin] |= 1<<(col); - } - - is31_write_data(page, led_control_register, 0x13); -} - -void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) { - uint8_t temp; - uint8_t led_control_word[2] = {0}; - - //blink if all leds are on - if (page == 0) { - is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - chThdSleepMilliseconds(5); - is31_read_register(0, 0x00, &temp); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - - if (temp == 0xFF) { - led_action |= (1<<2); //set blink bit - } - } - - set_led_bit(page,led_control_word,led_addr,led_action); -} - -/* ===================== - * hook into user keymap - * ===================== */ -void led_controller_init(void) { - uint8_t i; - - /* initialise I2C */ - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; - - chThdSleepMilliseconds(10); - - /* initialise IS31 chip */ - is31_init(); - - //set Display Option Register so all pwm intensity is controlled from page 0 - //enable blink and set blink period to 0.27s x rate - is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME + IS31_REG_DISPLAYOPT_BLINK_ENABLE + 4); - - /* set full pwm on page 1 */ - pwm_register_array[0] = 0; - __builtin_memset(pwm_register_array+1, 0xFF, 8); - for(i=0; i<8; i++) { - pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address - is31_write_data(0, pwm_register_array, 9); - chThdSleepMilliseconds(5); - } - - /* enable breathing when the displayed page changes */ - // Fade-in Fade-out, time = 26ms * 2^N, N=3 - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3); - - /* more time consuming LED processing should be offloaded into - * a thread, with asynchronous messaging. */ - chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS); - chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL); -} diff --git a/keyboards/infinity60/led_controller.h b/keyboards/infinity60/led_controller.h deleted file mode 100644 index e4b4717646..0000000000 --- a/keyboards/infinity60/led_controller.h +++ /dev/null @@ -1,121 +0,0 @@ -/* -Copyright 2016 flabbergast <s3+flabbergast@sdfeu.org> -Copyright 2017 jpetermans <tibcmhhm@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef _LED_CONTROLLER_H_ -#define _LED_CONTROLLER_H_ - -/* ========================= - * communication functions - * ========================= */ - -msg_t is31_write_data(uint8_t page, uint8_t *buffer, uint8_t size); -msg_t is31_write_register(uint8_t page, uint8_t reg, uint8_t data); -msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result); - -/* ============================ - * init functions/definitions - * ============================*/ - -void led_controller_init(void); - -#define CAPS_LOCK_LED_ADDRESS 46 //pin matrix location -#define NUM_LOCK_LED_ADDRESS 85 - -/* ============================= - * IS31 chip related definitions - * ============================= */ - -#define IS31_ADDR_DEFAULT 0x74 - -#define IS31_REG_CONFIG 0x00 -// bits in reg -#define IS31_REG_CONFIG_PICTUREMODE 0x00 -#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -#define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -#define IS31_REG_DISPLAYOPT 0x05 -#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x08 -// D2:D0 bits blink period time (*0.27s) - -#define IS31_REG_AUDIOSYNC 0x06 -#define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -#define IS31_REG_FRAMESTATE 0x07 - -#define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -#define IS31_REG_BREATHCTRL2 0x09 -#define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -#define IS31_REG_SHUTDOWN 0x0A -#define IS31_REG_SHUTDOWN_OFF 0x1 -#define IS31_REG_SHUTDOWN_ON 0x0 - -#define IS31_REG_AGCCTRL 0x0B -#define IS31_REG_ADCRATE 0x0C - -#define IS31_COMMANDREGISTER 0xFD -#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' - -#define IS31_TIMEOUT 10000 // needs to be long enough to write a whole page - -/* ======================================== - * LED Thread related items - * ========================================*/ - -extern mailbox_t led_mailbox; - -void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action); -void set_lock_leds (uint8_t led_addr, uint8_t led_action, uint8_t page); -void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte); -void write_led_page (uint8_t page, uint8_t *led_array, uint8_t led_count); - -// constants for signaling the LED controller thread -enum led_msg_t { - KEY_LIGHT, - SET_FULL_ROW, - OFF_LED, - ON_LED, - TOGGLE_LED, - BLINK_OFF_LED, - BLINK_ON_LED, - BLINK_TOGGLE_LED, - TOGGLE_ALL, - TOGGLE_BACKLIGHT, - DISPLAY_PAGE, - RESET_PAGE, - TOGGLE_NUM_LOCK, - TOGGLE_CAPS_LOCK, - TOGGLE_BREATH, - STEP_BRIGHTNESS -}; - -#endif /* _LED_CONTROLLER_H_ */ diff --git a/keyboards/infinity60/mcuconf.h b/keyboards/infinity60/mcuconf.h deleted file mode 100644 index 6af85d0796..0000000000 --- a/keyboards/infinity60/mcuconf.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -#define KINETIS_NO_INIT FALSE - -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 -#define KINETIS_CLKDIV1_OUTDIV2 1 -#define KINETIS_CLKDIV1_OUTDIV4 2 -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -#define KINETIS_USB_USB0_IRQ_PRIORITY 5 - -/* - * I2C driver settings - */ -#define KINETIS_I2C_USE_I2C0 TRUE -#define KINETIS_I2C_I2C0_PRIORITY 4 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/infinity60/readme.md b/keyboards/infinity60/readme.md deleted file mode 100644 index d99d1df080..0000000000 --- a/keyboards/infinity60/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# Infinity 60% - -A compact community driven keyboard. - -* Keyboard Maintainer: QMK Community -* Hardware Supported: Infinity 60% PCB -* Hardware Availability: https://input.club/devices/infinity-keyboard/ - -Make example for this keyboard (after setting up your build environment): - - make infinity60:default - -Flashing example for this keyboard: - - make infinity60:default:flash - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/infinity60/rev1/config.h b/keyboards/infinity60/rev1/config.h deleted file mode 100644 index d4ab34bccc..0000000000 --- a/keyboards/infinity60/rev1/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2015 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -// Keyboard Matrix Assignments -#define MATRIX_ROW_PINS { D1, D2, D3, D4, D5, D6, D7 } -#define MATRIX_COL_PINS { B0, B1, B2, B3, B16, B17, C4, C5, D0 } -#define UNUSED_PINS - - diff --git a/keyboards/infinity60/rev1/readme.md b/keyboards/infinity60/rev1/readme.md deleted file mode 100644 index 5df5cf5336..0000000000 --- a/keyboards/infinity60/rev1/readme.md +++ /dev/null @@ -1,2 +0,0 @@ -## Infinity 60, initial massdrop release -This is for the initial massdrop PCBs that don't support LEDs (rev 1.03a) diff --git a/keyboards/infinity60/rev1/rules.mk b/keyboards/infinity60/rev1/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/infinity60/rev1/rules.mk +++ /dev/null diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk deleted file mode 100644 index a3e05edde1..0000000000 --- a/keyboards/infinity60/rules.mk +++ /dev/null @@ -1,34 +0,0 @@ -# MCU name -MCU = MK20DX128 - -# Bootloader selection -BOOTLOADER = kiibohd - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -BOARD = MCHCK_K20 - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output - -DEFAULT_FOLDER = infinity60/led - -LAYOUTS = 60_ansi_split_bs_rshift - -# Enter lower-power sleep mode when on the ChibiOS idle thread -OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE |