summaryrefslogtreecommitdiff
path: root/keyboards/infinity60/led_controller.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/infinity60/led_controller.c')
-rw-r--r--keyboards/infinity60/led_controller.c275
1 files changed, 14 insertions, 261 deletions
diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c
index c162e9a8f0..d4ad0559b7 100644
--- a/keyboards/infinity60/led_controller.c
+++ b/keyboards/infinity60/led_controller.c
@@ -17,7 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/*
* LED controller code
- * WF uses IS31FL3731C matrix LED driver from ISSI
+ * IS31FL3731C matrix LED driver from ISSI
* datasheet: http://www.issi.com/WW/pdf/31FL3731C.pdf
*/
@@ -56,9 +56,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
order same as above (CA 1st row (8bytes), CB 1st row (8bytes), ...)
*/
-/* Which LED should be used for CAPS LOCK indicator
- * The usual Caps Lock position is C4-6, so the address is
- * 0x24 + (4-1)*0x10 + (8-1) = 0x59 */
+// Which LED should be used for CAPS LOCK indicator
#if !defined(CAPS_LOCK_LED_ADDRESS)
#define CAPS_LOCK_LED_ADDRESS 46
#endif
@@ -90,7 +88,6 @@ uint8_t rx[1] __attribute__((aligned(2)));
uint8_t full_page[0xB4+1] = {0};
// LED mask (which LEDs are present, selected by bits)
-// See page comment above, control alternates CA matrix/CB matrix
// IC60 pcb uses only CA matrix.
// Each byte is a control pin for 8 leds ordered 8-1
const uint8_t all_on_leds_mask[0x12] = {
@@ -182,11 +179,6 @@ static THD_FUNCTION(LEDthread, arg) {
uint8_t temp, msg_type, msg_pin, msg_col, msg_led;
msg_t msg;
-/* //control register variables
- uint8_t page, save_page, save_breath1, save_breath2;
- msg_t msg, retval;
-*/
-
// initialize persistent variables
pwm_step_status = 4; //full brightness
page_status = 0; //start frame 0 (all off/on)
@@ -197,77 +189,51 @@ page_status = 0; //start frame 0 (all off/on)
// be processed right away)
chMBFetch(&led_mailbox, &msg, TIME_INFINITE);
msg_col = (msg >> 24) & 0xFF;//if needed
- msg_pin = (msg >> 16) & 0XFF;//if needed (SET_FULL_ROW)
+ msg_pin = (msg >> 16) & 0XFF;//if needed (e.g. SET_FULL_ROW)
msg_type = (msg >> 8) & 0xFF; //second byte is msg type
msg_led = (msg) & 0xFF; //first byte is action information
- xprintf("--------------------\n");
- xprintf("mailbox fetch\nmsg: %X\n", msg);
- chThdSleepMilliseconds(20);
- xprintf("type: %X - pin: %X\n", msg_type, msg_pin);
- chThdSleepMilliseconds(20);
- xprintf("col: %X - led: %X\n", msg_col, msg_led);
- chThdSleepMilliseconds(10);
-
switch (msg_type){
- case KEY_LIGHT:
- //TODO: lighting key led on keypress
- break;
-
case SET_FULL_ROW:
//write full byte to pin address, msg_pin = pin #, msg_led = byte to write
//writes only to current page
- xprintf("SET_FULL_ROW\n");
write_led_byte(page_status,msg_pin,msg_led);
break;
case OFF_LED:
//on/off/toggle single led, msg_led = row/col of led
- xprintf("OFF_LED: %d\n", msg_led);
- chThdSleepMilliseconds(10);
set_led_bit(7, control_register_word, msg_led, 0);
is31_write_data (7, control_register_word, 0x02);
break;
case ON_LED:
- xprintf("ON_LED: %d\n", msg_led);
- chThdSleepMilliseconds(10);
set_led_bit(7, control_register_word, msg_led, 1);
is31_write_data (7, control_register_word, 0x02);
break;
case TOGGLE_LED:
- xprintf("TOGGLE_LED: %d\n", msg_led);
- chThdSleepMilliseconds(10);
set_led_bit(7, control_register_word, msg_led, 2);
is31_write_data (7, control_register_word, 0x02);
break;
case BLINK_OFF_LED:
//on/off/toggle single led, msg_led = row/col of led
- xprintf("BLINK_ON: %d\n", msg_led);
- chThdSleepMilliseconds(10);
set_led_bit(7, control_register_word, msg_led, 4);
is31_write_data (7, control_register_word, 0x02);
break;
case BLINK_ON_LED:
- xprintf("BLINK_OFF: %d\n", msg_led);
- chThdSleepMilliseconds(10);
set_led_bit(7, control_register_word, msg_led, 5);
is31_write_data (7, control_register_word, 0x02);
break;
case BLINK_TOGGLE_LED:
- xprintf("BLINK_TOGGLE: %d\n", msg_led);
- chThdSleepMilliseconds(10);
set_led_bit(7, control_register_word, msg_led, 6);
is31_write_data (7, control_register_word, 0x02);
break;
case TOGGLE_ALL:
- xprintf("TOGGLE_ALL: %d\n", msg_led);
- chThdSleepMilliseconds(10);
//msg_led = unused
- is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 0 off
+ is31_read_register(0, 0x00, &temp);
led_control_reg[0] = 0;
+ //if first byte is on, then toggle frame 0 off
if (temp==0 || page_status > 0) {
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
} else {
@@ -287,8 +253,6 @@ page_status = 0; //start frame 0 (all off/on)
case TOGGLE_BACKLIGHT:
//msg_led = on/off
- xprintf("TOGGLE_BACKLIGHT\n");
- chThdSleepMilliseconds(10);
//populate the 9 byte rows to be written to each pin, first byte is register (pin) address
if (msg_led == 1) {
@@ -304,13 +268,9 @@ page_status = 0; //start frame 0 (all off/on)
}
break;
- case DISPLAY_PAGE://show single layer indicator or full map of layer
- //msg_led = page to toggle on
- xprintf("DISPLAY_PAGE\n");
- chThdSleepMilliseconds(10);
+ case DISPLAY_PAGE:
+ //msg_led = page to toggle on
if (page_status != msg_led) {
- xprintf(" - new page\n");
- chThdSleepMilliseconds(10);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led);
page_status = msg_led;
@@ -321,33 +281,22 @@ page_status = 0; //start frame 0 (all off/on)
case RESET_PAGE:
//led_msg = page to reset
- xprintf("RESET_PAGE\n");
- chThdSleepMilliseconds(10);
led_control_reg[0] = 0;
__builtin_memset(led_control_reg+1, 0, 0x12);
is31_write_data(msg_led, led_control_reg, 0x13);
break;
case TOGGLE_NUM_LOCK:
- //msg_led = 0 or 1, off/on
- xprintf("NUMLOCK: %d\n", msg_led);
- chThdSleepMilliseconds(10);
+ //msg_led = 0 or 1, off/on
set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_led, page_status);
break;
-
case TOGGLE_CAPS_LOCK:
- xprintf("CAPSLOCK: %d\n", msg_led);
- chThdSleepMilliseconds(10);
- //msg_led = 0 or 1, off/on
+ //msg_led = 0 or 1, off/on
set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_led, page_status);
break;
- //TODO: MODE_BREATH
-
case STEP_BRIGHTNESS:
- xprintf("STEP_BACKLIGHT\n");
- chThdSleepMilliseconds(10);
- //led_msg = step pwm up or down
+ //led_msg = step pwm up or down
switch (msg_led) {
case 0:
if (pwm_step_status == 0) {
@@ -375,137 +324,6 @@ page_status = 0; //start frame 0 (all off/on)
is31_write_data(0,pwm_register_array,9);
}
break;
-
-/* case LED_MSG_SLEEP_LED_ON:
- // save current settings
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
- is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
- // use pages 7 and 8 for (hardware) breathing (assuming they're empty)
- is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
- is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
- retval = MSG_TIMEOUT;
- temp = 6;
- while(retval == MSG_TIMEOUT) {
- // switch to the other page
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
- temp = (temp == 6 ? 7 : 6);
- // the times should be sufficiently long for IS31 to finish switching pages
- retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
- }
- // received a message (should be a wakeup), so restore previous state
- chThdSleepMilliseconds(3000); // need to wait until the page change finishes
- // note: any other messages are queued
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
- is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
- break;
- case LED_MSG_SLEEP_LED_OFF:
- // should not get here; wakeup should be received in the branch above break;
- break;
-*/
- xprintf("--------------------\n");
- chThdSleepMilliseconds(10);
- }
- }
-}
-
-/* ==============================
- * debug function
- * ============================== */
-void print_debug(uint8_t page) {
- uint8_t j, debug_temp;
- //debugging code - print full led/blink/pwm registers on each frame
- xprintf("----layer state----: %X\n", layer_state);
- xprintf("page: %d\n", page);
- chThdSleepMilliseconds(10);
- for(j=0;j<0x24;j++){
- if(j > 0 && j % 9 == 0){
- xprintf("\n");
- }
- switch (j) {
- case 0:
- xprintf("\n--on-off--\n");
- chThdSleepMilliseconds(10);
- break;
- case 0x12:
- xprintf("\n--blink--\n");
- chThdSleepMilliseconds(10);
- break;
- }
- is31_read_register(page,j,&debug_temp);
- xprintf("%02X, ", debug_temp);
- chThdSleepMilliseconds(10);
- }
-
- xprintf("\n--pwm--\n");
- chThdSleepMilliseconds(10);
- for(j=0x24;j<0xB4;j++) {
- is31_read_register(page,j,&debug_temp);
- xprintf("%02X, ", debug_temp);
- chThdSleepMilliseconds(10);
- if(j > 0x24 && (j-3) % 8 == 0){
- xprintf("\n");
- }
- }
- xprintf("\n");
-
- //Function Register
- xprintf("\n--FUNCTION--\n");
- chThdSleepMilliseconds(10);
- for(j=0;j<0x0D;j++) {
- is31_read_register(0x0B,j,&debug_temp);
- switch(j) {
- case 0:
- xprintf("Config %02X", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 1:
- xprintf(" - Pict %02X\n", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 2:
- xprintf("Auto1 %02X", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 3:
- xprintf(" - Auto2 %02X\n", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 5:
- xprintf("Disp %02X", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 6:
- xprintf(" - Audio %02X\n", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 7:
- xprintf("Frame %02X", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 8:
- xprintf(" - Breath1 %02X\n", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 9:
- xprintf("Breath2 %02X - ", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 10:
- xprintf(" - Shut %02X\n", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 11:
- xprintf("AGC %02X", debug_temp);
- chThdSleepMilliseconds(2);
- break;
- case 12:
- xprintf(" - ADC %02X\n", debug_temp);
- chThdSleepMilliseconds(2);
- break;
}
}
}
@@ -515,50 +333,29 @@ void print_debug(uint8_t page) {
* ============================== */
void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint8_t action) {
- //returns 2 bytes led control register address and byte to write
+ //returns 2 bytes: led control register address and byte to write
//0 - bit off, 1 - bit on, 2 - toggle bit
uint8_t control_reg_addr, column_bit, column_byte, bit_temp, blink_on;
//check for valid led address
if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
- xprintf("Invalid address: %d\n", led_addr);
return;
}
- xprintf("set_led_bit: %d\n", led_addr);
- xprintf("action: %d\n", action);
- chThdSleepMilliseconds(10);
- //check blink bit
+ //check for blink bit
blink_on = action>>2;
action &= ~(1<<2); //strip blink bit
//first byte is led control register address 0x00
//msg_led tens column is pin#, ones column is bit position in 8-bit mask
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-register is every other byte
- xprintf("pre-reg_addr: %2X\n", control_reg_addr);
- chThdSleepMilliseconds(10);
control_reg_addr += blink_on == 1 ? 0x12 : 0x00;//shift 12 bytes to blink register
- xprintf("blink-reg_addr: %2X\n", control_reg_addr);
- chThdSleepMilliseconds(10);
- xprintf("page: %2X\n", page);
- chThdSleepMilliseconds(10);
-
-
- is31_read_register(page, 0x06, &bit_temp);//maintain status of leds on this byte
- xprintf("reg 06: %2X\n", bit_temp);
- is31_read_register(page, 0x17, &bit_temp);//maintain status of leds on this byte
- xprintf("reg 17: %2X\n", bit_temp);
- is31_read_register(page, 0x18, &bit_temp);//maintain status of leds on this byte
- xprintf("reg 18: %2X\n", bit_temp);
- is31_read_register(page, 0x19, &bit_temp);//maintain status of leds on this byte
- xprintf("reg 19: %2X\n", bit_temp);
+
is31_read_register(page, control_reg_addr, &bit_temp);//maintain status of leds on this byte
column_bit = 1<<(led_addr % 10 - 1);
column_byte = bit_temp;
- xprintf("column_byte read: %2X\n", column_byte);
- chThdSleepMilliseconds(10);
switch(action) {
case 0:
column_byte &= ~column_bit;
@@ -570,8 +367,6 @@ void set_led_bit (uint8_t page, uint8_t *led_control_reg, uint8_t led_addr, uint
column_byte ^= column_bit;
break;
}
- xprintf("column_byte write: %2X\n", column_byte);
- chThdSleepMilliseconds(10);
//return word to be written in register
led_control_reg[0] = control_reg_addr;
@@ -589,7 +384,7 @@ void write_led_byte (uint8_t page, uint8_t row, uint8_t led_byte) {
void write_led_page (uint8_t page, uint8_t *user_led_array, uint8_t led_count) {
uint8_t i;
uint8_t pin, col;
- uint8_t led_control_register[0x13] = {0};//control register start address + 0x12 bytes
+ uint8_t led_control_register[0x13] = {0};
__builtin_memset(led_control_register,0,13);
@@ -607,30 +402,15 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
uint8_t lock_temp;
uint8_t led_control_word[2] = {0};
- xprintf("---set lock---\n");
- chThdSleepMilliseconds(10);
-
//blink if all leds are on
if (page == 0) {
is31_read_register(0, 0x00, &lock_temp);
- xprintf("AllOnReg: %2X\n", lock_temp);
- chThdSleepMilliseconds(10);
if (lock_temp == 0xFF) {
- xprintf("AllOntrue\n");
- chThdSleepMilliseconds(10);
led_action |= (1<<2); //set blink bit
- } else {
- xprintf("AllOnfalse\n");
- chThdSleepMilliseconds(10);
}
}
set_led_bit(page,led_control_word,led_addr,led_action);
-
- xprintf("led_word: %2X", led_control_word[0]);
- xprintf("%X\n", led_control_word[1]);
- chThdSleepMilliseconds(10);
-
is31_write_data(page, led_control_word, 0x02);
}
@@ -679,30 +459,3 @@ void led_controller_init(void) {
chMBObjectInit(&led_mailbox, led_mailbox_queue, LED_MAILBOX_NUM_MSGS);
chThdCreateStatic(waLEDthread, sizeof(waLEDthread), LOWPRIO, LEDthread, NULL);
}
-
-//TODO: Don't know equivalent QMK hooks for these
-//
-//void hook_usb_suspend_entry(void) {
-//#ifdef SLEEP_LED_ENABLE
-// chSysLockFromISR();
-// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_ON);
-// chSysUnlockFromISR();
-//#endif /* SLEEP_LED_ENABLE */
-//}
-//
-//void hook_usb_suspend_loop(void) {
-// chThdSleepMilliseconds(100);
-// /* Remote wakeup */
-// if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) {
-// send_remote_wakeup(&USB_DRIVER);
-// }
-//}
-//
-//void hook_usb_wakeup(void) {
-//#ifdef SLEEP_LED_ENABLE
-// chSysLockFromISR();
-// chMBPostI(&led_mailbox, LED_MSG_SLEEP_LED_OFF);
-// chSysUnlockFromISR();
-//#endif /* SLEEP_LED_ENABLE */
-//}
-//*/