summaryrefslogtreecommitdiff
path: root/keyboards/hnahkb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/hnahkb')
-rw-r--r--keyboards/hnahkb/freyr/config.h37
-rw-r--r--keyboards/hnahkb/freyr/info.json3
-rw-r--r--keyboards/hnahkb/freyr/rules.mk8
-rw-r--r--keyboards/hnahkb/stella/config.h37
-rw-r--r--keyboards/hnahkb/stella/info.json3
-rw-r--r--keyboards/hnahkb/stella/rules.mk8
-rw-r--r--keyboards/hnahkb/vn66/config.h32
-rw-r--r--keyboards/hnahkb/vn66/info.json3
-rw-r--r--keyboards/hnahkb/vn66/rules.mk8
9 files changed, 9 insertions, 130 deletions
diff --git a/keyboards/hnahkb/freyr/config.h b/keyboards/hnahkb/freyr/config.h
index 81cd407d13..655921c244 100644
--- a/keyboards/hnahkb/freyr/config.h
+++ b/keyboards/hnahkb/freyr/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 10
@@ -63,43 +62,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -115,7 +82,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/hnahkb/freyr/info.json b/keyboards/hnahkb/freyr/info.json
index 4bb8ae739d..0fce74f0cc 100644
--- a/keyboards/hnahkb/freyr/info.json
+++ b/keyboards/hnahkb/freyr/info.json
@@ -8,6 +8,9 @@
"pid": "0x1895",
"device_version": "0.0.2"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["tkl_ansi", "tkl_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/hnahkb/freyr/rules.mk b/keyboards/hnahkb/freyr/rules.mk
index 063d967a7f..26064ab2ac 100644
--- a/keyboards/hnahkb/freyr/rules.mk
+++ b/keyboards/hnahkb/freyr/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi tkl_iso
diff --git a/keyboards/hnahkb/stella/config.h b/keyboards/hnahkb/stella/config.h
index 46112a56cc..bb6b1f2726 100644
--- a/keyboards/hnahkb/stella/config.h
+++ b/keyboards/hnahkb/stella/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 10
@@ -63,43 +62,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -115,7 +82,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/hnahkb/stella/info.json b/keyboards/hnahkb/stella/info.json
index bd3870bd4e..f3e6550f8e 100644
--- a/keyboards/hnahkb/stella/info.json
+++ b/keyboards/hnahkb/stella/info.json
@@ -8,6 +8,9 @@
"pid": "0x0AB7",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["tkl_ansi", "tkl_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/hnahkb/stella/rules.mk b/keyboards/hnahkb/stella/rules.mk
index 1632d897c7..b7e8d8e706 100644
--- a/keyboards/hnahkb/stella/rules.mk
+++ b/keyboards/hnahkb/stella/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -16,5 +10,3 @@ NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-
-LAYOUTS = tkl_ansi tkl_iso
diff --git a/keyboards/hnahkb/vn66/config.h b/keyboards/hnahkb/vn66/config.h
index 50c97ad6a8..276e34a535 100644
--- a/keyboards/hnahkb/vn66/config.h
+++ b/keyboards/hnahkb/vn66/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 5
@@ -76,12 +75,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
@@ -93,27 +86,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define GRAVE_ESC_CTRL_OVERRIDE
/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
@@ -128,7 +100,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/hnahkb/vn66/info.json b/keyboards/hnahkb/vn66/info.json
index bff3ba596d..ce2124fe5c 100644
--- a/keyboards/hnahkb/vn66/info.json
+++ b/keyboards/hnahkb/vn66/info.json
@@ -8,6 +8,9 @@
"pid": "0xCA2C",
"device_version": "0.0.1"
},
+ "processor": "atmega32u4",
+ "bootloader": "atmel-dfu",
+ "community_layouts": ["66_ansi", "66_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
diff --git a/keyboards/hnahkb/vn66/rules.mk b/keyboards/hnahkb/vn66/rules.mk
index 542b79b4d8..4f5a4635de 100644
--- a/keyboards/hnahkb/vn66/rules.mk
+++ b/keyboards/hnahkb/vn66/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -18,5 +12,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes
LTO_ENABLE = yes
-
-LAYOUTS = 66_ansi 66_iso