diff options
Diffstat (limited to 'keyboards/hineybush')
36 files changed, 1107 insertions, 0 deletions
diff --git a/keyboards/hineybush/h08_ocelot/config.h b/keyboards/hineybush/h08_ocelot/config.h new file mode 100644 index 0000000000..9b5fd2d9b9 --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/config.h @@ -0,0 +1,150 @@ +/* +Copyright 2021 hineybush + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xE8E9 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hiney LLC +#define PRODUCT h08 + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B4, B6 } +#define MATRIX_COL_PINS { F4, C7, D0, D1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN F1 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 7 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 220 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h08_ocelot/h08_ocelot.c b/keyboards/hineybush/h08_ocelot/h08_ocelot.c new file mode 100644 index 0000000000..e00bd9ecb5 --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/h08_ocelot.c @@ -0,0 +1,17 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "h08_ocelot.h" diff --git a/keyboards/hineybush/h08_ocelot/h08_ocelot.h b/keyboards/hineybush/h08_ocelot/h08_ocelot.h new file mode 100644 index 0000000000..92bded4558 --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/h08_ocelot.h @@ -0,0 +1,36 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13 \ +) { \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 } \ +} + diff --git a/keyboards/hineybush/h08_ocelot/info.json b/keyboards/hineybush/h08_ocelot/info.json new file mode 100644 index 0000000000..2e8dd25a87 --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "h08", + "url": "", + "maintainer": "hineybush", + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}] + } + } +} diff --git a/keyboards/hineybush/h08_ocelot/keymaps/default/keymap.c b/keyboards/hineybush/h08_ocelot/keymaps/default/keymap.c new file mode 100644 index 0000000000..e236a5c6ab --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, + KC_5, KC_6, KC_7, MO(_FN) + ), + [_FN] = LAYOUT( + RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + diff --git a/keyboards/hineybush/h08_ocelot/keymaps/default/readme.md b/keyboards/hineybush/h08_ocelot/keymaps/default/readme.md new file mode 100644 index 0000000000..7bed472217 --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for h08 diff --git a/keyboards/hineybush/h08_ocelot/keymaps/via/keymap.c b/keyboards/hineybush/h08_ocelot/keymaps/via/keymap.c new file mode 100644 index 0000000000..d786dcad68 --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/keymaps/via/keymap.c @@ -0,0 +1,45 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, + KC_5, KC_6, KC_7, MO(_FN) + ), + [_FN1] = LAYOUT( + RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + diff --git a/keyboards/hineybush/h08_ocelot/keymaps/via/readme.md b/keyboards/hineybush/h08_ocelot/keymaps/via/readme.md new file mode 100644 index 0000000000..54e95c67fd --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA-enabled keymap for h08 diff --git a/keyboards/hineybush/h08_ocelot/keymaps/via/rules.mk b/keyboards/hineybush/h08_ocelot/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/hineybush/h08_ocelot/readme.md b/keyboards/hineybush/h08_ocelot/readme.md new file mode 100644 index 0000000000..07d170101c --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/readme.md @@ -0,0 +1,27 @@ +# h08 + + + +8-key macropad for the Singa Ocelot. + +* Keyboard Maintainer: [hineybush](https://github.com/hineybush) +* Hardware Supported: h08 +* Hardware Availability: Singa Ocelot + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for this keyboard (after setting up your build environment): + + make hineybush/h08_ocelot:default + +Flashing example for this keyboard: + + make hineybush/h08_ocelot:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/hineybush/h08_ocelot/rules.mk b/keyboards/hineybush/h08_ocelot/rules.mk new file mode 100644 index 0000000000..465de5f68d --- /dev/null +++ b/keyboards/hineybush/h08_ocelot/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/hineybush/h65/config.h b/keyboards/hineybush/h65/config.h new file mode 100644 index 0000000000..320e9c6fe8 --- /dev/null +++ b/keyboards/hineybush/h65/config.h @@ -0,0 +1,152 @@ +/* +Copyright 2021 hineybush + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xE9E4 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hiney LLC +#define PRODUCT h65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D7, D6, D4, D1, D0 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, B0, B1, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +#define LED_CAPS_LOCK_PIN E6 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D2 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 17 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/hineybush/h65/h65.c b/keyboards/hineybush/h65/h65.c new file mode 100644 index 0000000000..76467ef91b --- /dev/null +++ b/keyboards/hineybush/h65/h65.c @@ -0,0 +1,17 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "h65.h" diff --git a/keyboards/hineybush/h65/h65.h b/keyboards/hineybush/h65/h65.h new file mode 100644 index 0000000000..8e82f1620f --- /dev/null +++ b/keyboards/hineybush/h65/h65.h @@ -0,0 +1,41 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k114, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k214, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k314, \ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k414, \ + k400, k401, k402, k403, k406, k408, k409, k410, k411, k412, k413 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214 }, \ + { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314 }, \ + { k400, k401, k402, k403, KC_NO,KC_NO,k406,KC_NO, k408, k409, k410, k411, k412, k413, k414 } \ +} diff --git a/keyboards/hineybush/h65/info.json b/keyboards/hineybush/h65/info.json new file mode 100644 index 0000000000..770875afae --- /dev/null +++ b/keyboards/hineybush/h65/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "h65", + "url": "", + "maintainer": "hineybush", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} diff --git a/keyboards/hineybush/h65/keymaps/default/keymap.c b/keyboards/hineybush/h65/keymaps/default/keymap.c new file mode 100644 index 0000000000..d563cbbc7a --- /dev/null +++ b/keyboards/hineybush/h65/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_END, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT), + + [_FN] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/hineybush/h65/keymaps/default/readme.md b/keyboards/hineybush/h65/keymaps/default/readme.md new file mode 100644 index 0000000000..17b99a5cde --- /dev/null +++ b/keyboards/hineybush/h65/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for h65 diff --git a/keyboards/hineybush/h65/keymaps/mc65/keymap.c b/keyboards/hineybush/h65/keymaps/mc65/keymap.c new file mode 100644 index 0000000000..b135741b3f --- /dev/null +++ b/keyboards/hineybush/h65/keymaps/mc65/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_END, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT), + + [_FN1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + + diff --git a/keyboards/hineybush/h65/keymaps/mc65/readme.md b/keyboards/hineybush/h65/keymaps/mc65/readme.md new file mode 100644 index 0000000000..ec8815555f --- /dev/null +++ b/keyboards/hineybush/h65/keymaps/mc65/readme.md @@ -0,0 +1 @@ +# The VIA keymap for h65 diff --git a/keyboards/hineybush/h65/keymaps/mc65/rules.mk b/keyboards/hineybush/h65/keymaps/mc65/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/hineybush/h65/keymaps/mc65/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/hineybush/h65/keymaps/via/keymap.c b/keyboards/hineybush/h65/keymaps/via/keymap.c new file mode 100644 index 0000000000..b135741b3f --- /dev/null +++ b/keyboards/hineybush/h65/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_END, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT), + + [_FN1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + + diff --git a/keyboards/hineybush/h65/keymaps/via/readme.md b/keyboards/hineybush/h65/keymaps/via/readme.md new file mode 100644 index 0000000000..ec8815555f --- /dev/null +++ b/keyboards/hineybush/h65/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for h65 diff --git a/keyboards/hineybush/h65/keymaps/via/rules.mk b/keyboards/hineybush/h65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/hineybush/h65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/hineybush/h65/readme.md b/keyboards/hineybush/h65/readme.md new file mode 100644 index 0000000000..c793a44966 --- /dev/null +++ b/keyboards/hineybush/h65/readme.md @@ -0,0 +1,27 @@ +# h65 + + + +A 65%, USB 2.0 Type C PCB. + +* Keyboard Maintainer: [hineybush](https://github.com/hineybush) +* Hardware Supported: h65, Singa Kohaku, MC65 "mcbitch" PCB +* Hardware Availability: Singa Kohaku Group Buy, MC65 + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for this keyboard (after setting up your build environment): + + make h65:default + +Flashing example for this keyboard: + + make h65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/hineybush/h65/rules.mk b/keyboards/hineybush/h65/rules.mk new file mode 100644 index 0000000000..b8ddfaba64 --- /dev/null +++ b/keyboards/hineybush/h65/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/hineybush/h65_hotswap/config.h b/keyboards/hineybush/h65_hotswap/config.h new file mode 100644 index 0000000000..805476d002 --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/config.h @@ -0,0 +1,150 @@ +/* +Copyright 2021 hineybush + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xE8B7 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Hiney LLC +#define PRODUCT h65 hotswap + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D7, D6, D4, D1, D0 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, B0, B1, B2, B3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +#define LED_CAPS_LOCK_PIN E6 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D2 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 17 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/hineybush/h65_hotswap/h65_hotswap.c b/keyboards/hineybush/h65_hotswap/h65_hotswap.c new file mode 100644 index 0000000000..df5e56bf0b --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/h65_hotswap.c @@ -0,0 +1,17 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "h65_hotswap.h" diff --git a/keyboards/hineybush/h65_hotswap/h65_hotswap.h b/keyboards/hineybush/h65_hotswap/h65_hotswap.h new file mode 100644 index 0000000000..a4b41be481 --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/h65_hotswap.h @@ -0,0 +1,41 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k114, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k214, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k314, \ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k414, \ + k400, k401, k402, k404, k406, k407, k409, k410, k411, k412, k413 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214 }, \ + { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314 }, \ + { k400, k401, k402, KC_NO,k404 ,KC_NO,k406, k407, KC_NO, k409, k410, k411, k412, k413, k414 } \ +} diff --git a/keyboards/hineybush/h65_hotswap/info.json b/keyboards/hineybush/h65_hotswap/info.json new file mode 100644 index 0000000000..105358b98d --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "h65 hotswap", + "url": "", + "maintainer": "hineybush", + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} diff --git a/keyboards/hineybush/h65_hotswap/keymaps/default/keymap.c b/keyboards/hineybush/h65_hotswap/keymaps/default/keymap.c new file mode 100644 index 0000000000..c69e1e34bd --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_END, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT), + + [_FN] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/hineybush/h65_hotswap/keymaps/default/readme.md b/keyboards/hineybush/h65_hotswap/keymaps/default/readme.md new file mode 100644 index 0000000000..9984e09531 --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for h65 hotswap diff --git a/keyboards/hineybush/h65_hotswap/keymaps/via/keymap.c b/keyboards/hineybush/h65_hotswap/keymaps/via/keymap.c new file mode 100644 index 0000000000..d225a8c834 --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 hineybush + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_END, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT), + + [_FN1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [_FN2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + + diff --git a/keyboards/hineybush/h65_hotswap/keymaps/via/readme.md b/keyboards/hineybush/h65_hotswap/keymaps/via/readme.md new file mode 100644 index 0000000000..a8811e97c1 --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for h65 hotswap diff --git a/keyboards/hineybush/h65_hotswap/keymaps/via/rules.mk b/keyboards/hineybush/h65_hotswap/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/hineybush/h65_hotswap/readme.md b/keyboards/hineybush/h65_hotswap/readme.md new file mode 100644 index 0000000000..5e2250b5af --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/readme.md @@ -0,0 +1,27 @@ +# h65 hotswap + + + +A 65%, hotswap, USB 2.0 Type C PCB. + +* Keyboard Maintainer: [hineybush](https://github.com/hineybush) +* Hardware Supported: h65hs, Singa Kohaku +* Hardware Availability: Singa Kohaku Group Buy + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for this keyboard (after setting up your build environment): + + make hineybush/h65:default + +Flashing example for this keyboard: + + make hineybush/h65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/hineybush/h65_hotswap/rules.mk b/keyboards/hineybush/h65_hotswap/rules.mk new file mode 100644 index 0000000000..702fe717f2 --- /dev/null +++ b/keyboards/hineybush/h65_hotswap/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output |