summaryrefslogtreecommitdiff
path: root/keyboards/hillside
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/hillside')
-rw-r--r--keyboards/hillside/46/0_1/config.h20
-rw-r--r--keyboards/hillside/46/0_1/info.json3
-rw-r--r--keyboards/hillside/46/0_1/rules.mk2
-rw-r--r--keyboards/hillside/48/0_1/config.h20
-rw-r--r--keyboards/hillside/48/0_1/info.json3
-rw-r--r--keyboards/hillside/48/0_1/rules.mk2
-rw-r--r--keyboards/hillside/52/0_1/config.h20
-rw-r--r--keyboards/hillside/52/0_1/info.json3
-rw-r--r--keyboards/hillside/52/0_1/rules.mk2
9 files changed, 36 insertions, 39 deletions
diff --git a/keyboards/hillside/46/0_1/config.h b/keyboards/hillside/46/0_1/config.h
index 81736ff175..20c4deca40 100644
--- a/keyboards/hillside/46/0_1/config.h
+++ b/keyboards/hillside/46/0_1/config.h
@@ -8,20 +8,18 @@
#define SPLIT_HAND_MATRIX_GRID B5, F6
#define MATRIX_MASKED
-#define RGBLIGHT_SLEEP
-
/* Haptic hardware */
// The Pimoroni is the likely hardware, for which these settings work
-#define FB_ERM_LRA 1
-#define FB_BRAKEFACTOR 3 /* 1x:0, 2x:1, 3x:2, 4x:3, 6:4, 8:5, 16:6, Disable:7 */
-#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
+#define DRV2605L_FB_ERM_LRA 1
+#define DRV2605L_FB_BRAKEFACTOR 3 /* 1x:0, 2x:1, 3x:2, 4x:3, 6:4, 8:5, 16:6, Disable:7 */
+#define DRV2605L_FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* Please refer to your datasheet for optimal setting for your specific motor.*/
-#define RATED_VOLTAGE 2
-#define V_PEAK 2.8
-#define V_RMS 2.0
-#define F_LRA 205 /* resonance freq */
+#define DRV2605L_RATED_VOLTAGE 2
+#define DRV2605L_V_PEAK 2.8
+#define DRV2605L_V_RMS 2.0
+#define DRV2605L_F_LRA 205 /* resonance freq */
/* Haptic waveforms */
// Two mild waveforms
-#define DRV_GREETING alert_750ms
-#define DRV_MODE_DEFAULT sharp_tick3_60
+#define DRV2605L_GREETING DRV2605L_EFFECT_750_MS_ALERT_100
+#define DRV2605L_DEFAULT_MODE DRV2605L_EFFECT_SHARP_TICK_3_60
diff --git a/keyboards/hillside/46/0_1/info.json b/keyboards/hillside/46/0_1/info.json
index 8b5fa112f7..7512debabd 100644
--- a/keyboards/hillside/46/0_1/info.json
+++ b/keyboards/hillside/46/0_1/info.json
@@ -36,7 +36,8 @@
"split": true,
"hue_steps": 8,
"saturation_steps": 8,
- "brightness_steps": 8
+ "brightness_steps": 8,
+ "sleep": true
},
"ws2812": {
"pin": "D3"
diff --git a/keyboards/hillside/46/0_1/rules.mk b/keyboards/hillside/46/0_1/rules.mk
index 2501147ea8..3c12e55b58 100644
--- a/keyboards/hillside/46/0_1/rules.mk
+++ b/keyboards/hillside/46/0_1/rules.mk
@@ -5,4 +5,4 @@ LTO_ENABLE = yes # Use link time optimization for smaller firmware
# enable it and set its driver here or in your keymap folder
# The Pimoroni board's driver is DRV2605L
# HAPTIC_ENABLE = yes # Enable haptic driver
-# HAPTIC_DRIVER = DRV2605L
+# HAPTIC_DRIVER = drv2605l
diff --git a/keyboards/hillside/48/0_1/config.h b/keyboards/hillside/48/0_1/config.h
index 72f1a842c7..150573c165 100644
--- a/keyboards/hillside/48/0_1/config.h
+++ b/keyboards/hillside/48/0_1/config.h
@@ -3,20 +3,18 @@
#pragma once
-#define RGBLIGHT_SLEEP
-
/* Haptic hardware */
// The Pimoroni is the likely hardware, for which these settings work
-#define FB_ERM_LRA 1
-#define FB_BRAKEFACTOR 3 /* 1x:0, 2x:1, 3x:2, 4x:3, 6:4, 8:5, 16:6, Disable:7 */
-#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
+#define DRV2605L_FB_ERM_LRA 1
+#define DRV2605L_FB_BRAKEFACTOR 3 /* 1x:0, 2x:1, 3x:2, 4x:3, 6:4, 8:5, 16:6, Disable:7 */
+#define DRV2605L_FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* Please refer to your datasheet for optimal setting for your specific motor.*/
-#define RATED_VOLTAGE 2
-#define V_PEAK 2.8
-#define V_RMS 2.0
-#define F_LRA 205 /* resonance freq */
+#define DRV2605L_RATED_VOLTAGE 2
+#define DRV2605L_V_PEAK 2.8
+#define DRV2605L_V_RMS 2.0
+#define DRV2605L_F_LRA 205 /* resonance freq */
/* Haptic waveforms */
// Two mild waveforms
-#define DRV_GREETING alert_750ms
-#define DRV_MODE_DEFAULT sharp_tick3_60
+#define DRV2605L_GREETING DRV2605L_EFFECT_750_MS_ALERT_100
+#define DRV2605L_DEFAULT_MODE DRV2605L_EFFECT_SHARP_TICK_3_60
diff --git a/keyboards/hillside/48/0_1/info.json b/keyboards/hillside/48/0_1/info.json
index 19e38259d3..2159d1ca68 100644
--- a/keyboards/hillside/48/0_1/info.json
+++ b/keyboards/hillside/48/0_1/info.json
@@ -37,7 +37,8 @@
"split": true,
"hue_steps": 8,
"saturation_steps": 8,
- "brightness_steps": 8
+ "brightness_steps": 8,
+ "sleep": true
},
"ws2812": {
"pin": "D3"
diff --git a/keyboards/hillside/48/0_1/rules.mk b/keyboards/hillside/48/0_1/rules.mk
index 2501147ea8..3c12e55b58 100644
--- a/keyboards/hillside/48/0_1/rules.mk
+++ b/keyboards/hillside/48/0_1/rules.mk
@@ -5,4 +5,4 @@ LTO_ENABLE = yes # Use link time optimization for smaller firmware
# enable it and set its driver here or in your keymap folder
# The Pimoroni board's driver is DRV2605L
# HAPTIC_ENABLE = yes # Enable haptic driver
-# HAPTIC_DRIVER = DRV2605L
+# HAPTIC_DRIVER = drv2605l
diff --git a/keyboards/hillside/52/0_1/config.h b/keyboards/hillside/52/0_1/config.h
index 81736ff175..20c4deca40 100644
--- a/keyboards/hillside/52/0_1/config.h
+++ b/keyboards/hillside/52/0_1/config.h
@@ -8,20 +8,18 @@
#define SPLIT_HAND_MATRIX_GRID B5, F6
#define MATRIX_MASKED
-#define RGBLIGHT_SLEEP
-
/* Haptic hardware */
// The Pimoroni is the likely hardware, for which these settings work
-#define FB_ERM_LRA 1
-#define FB_BRAKEFACTOR 3 /* 1x:0, 2x:1, 3x:2, 4x:3, 6:4, 8:5, 16:6, Disable:7 */
-#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
+#define DRV2605L_FB_ERM_LRA 1
+#define DRV2605L_FB_BRAKEFACTOR 3 /* 1x:0, 2x:1, 3x:2, 4x:3, 6:4, 8:5, 16:6, Disable:7 */
+#define DRV2605L_FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
/* Please refer to your datasheet for optimal setting for your specific motor.*/
-#define RATED_VOLTAGE 2
-#define V_PEAK 2.8
-#define V_RMS 2.0
-#define F_LRA 205 /* resonance freq */
+#define DRV2605L_RATED_VOLTAGE 2
+#define DRV2605L_V_PEAK 2.8
+#define DRV2605L_V_RMS 2.0
+#define DRV2605L_F_LRA 205 /* resonance freq */
/* Haptic waveforms */
// Two mild waveforms
-#define DRV_GREETING alert_750ms
-#define DRV_MODE_DEFAULT sharp_tick3_60
+#define DRV2605L_GREETING DRV2605L_EFFECT_750_MS_ALERT_100
+#define DRV2605L_DEFAULT_MODE DRV2605L_EFFECT_SHARP_TICK_3_60
diff --git a/keyboards/hillside/52/0_1/info.json b/keyboards/hillside/52/0_1/info.json
index 8584ee1512..63bbf3b257 100644
--- a/keyboards/hillside/52/0_1/info.json
+++ b/keyboards/hillside/52/0_1/info.json
@@ -36,7 +36,8 @@
"split": true,
"hue_steps": 8,
"saturation_steps": 8,
- "brightness_steps": 8
+ "brightness_steps": 8,
+ "sleep": true
},
"ws2812": {
"pin": "D3"
diff --git a/keyboards/hillside/52/0_1/rules.mk b/keyboards/hillside/52/0_1/rules.mk
index 2501147ea8..3c12e55b58 100644
--- a/keyboards/hillside/52/0_1/rules.mk
+++ b/keyboards/hillside/52/0_1/rules.mk
@@ -5,4 +5,4 @@ LTO_ENABLE = yes # Use link time optimization for smaller firmware
# enable it and set its driver here or in your keymap folder
# The Pimoroni board's driver is DRV2605L
# HAPTIC_ENABLE = yes # Enable haptic driver
-# HAPTIC_DRIVER = DRV2605L
+# HAPTIC_DRIVER = drv2605l
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 03:03:14 +0000