summaryrefslogtreecommitdiff
path: root/keyboards/handwired/twadlee/tp69
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/handwired/twadlee/tp69')
-rw-r--r--keyboards/handwired/twadlee/tp69/chconf.h700
-rw-r--r--keyboards/handwired/twadlee/tp69/config.h253
-rw-r--r--keyboards/handwired/twadlee/tp69/halconf.h524
-rw-r--r--keyboards/handwired/twadlee/tp69/info.json12
-rw-r--r--keyboards/handwired/twadlee/tp69/keymaps/default/keymap.c28
-rw-r--r--keyboards/handwired/twadlee/tp69/keymaps/default/readme.md1
-rw-r--r--keyboards/handwired/twadlee/tp69/mcuconf.h45
-rw-r--r--keyboards/handwired/twadlee/tp69/readme.md18
-rw-r--r--keyboards/handwired/twadlee/tp69/rules.mk28
-rw-r--r--keyboards/handwired/twadlee/tp69/tp69.c18
-rw-r--r--keyboards/handwired/twadlee/tp69/tp69.h48
-rw-r--r--keyboards/handwired/twadlee/tp69/twadlee-tp69-kle.json139
12 files changed, 1814 insertions, 0 deletions
diff --git a/keyboards/handwired/twadlee/tp69/chconf.h b/keyboards/handwired/twadlee/tp69/chconf.h
new file mode 100644
index 0000000000..f1640bb199
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/chconf.h
@@ -0,0 +1,700 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+# define CHCONF_H
+
+# define _CHIBIOS_RT_CONF_
+# define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+# if !defined(CH_CFG_ST_RESOLUTION)
+# define CH_CFG_ST_RESOLUTION 32
+# endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+# if !defined(CH_CFG_ST_FREQUENCY)
+# define CH_CFG_ST_FREQUENCY 1000
+# endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+# if !defined(CH_CFG_INTERVALS_SIZE)
+# define CH_CFG_INTERVALS_SIZE 32
+# endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+# if !defined(CH_CFG_TIME_TYPES_SIZE)
+# define CH_CFG_TIME_TYPES_SIZE 32
+# endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+# if !defined(CH_CFG_ST_TIMEDELTA)
+# define CH_CFG_ST_TIMEDELTA 0
+# endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+# if !defined(CH_CFG_TIME_QUANTUM)
+# define CH_CFG_TIME_QUANTUM 20
+# endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+# if !defined(CH_CFG_MEMCORE_SIZE)
+# define CH_CFG_MEMCORE_SIZE 0
+# endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+# if !defined(CH_CFG_NO_IDLE_THREAD)
+# define CH_CFG_NO_IDLE_THREAD FALSE
+# endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_OPTIMIZE_SPEED)
+# define CH_CFG_OPTIMIZE_SPEED TRUE
+# endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_TM)
+# define CH_CFG_USE_TM FALSE
+# endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_REGISTRY)
+# define CH_CFG_USE_REGISTRY TRUE
+# endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_WAITEXIT)
+# define CH_CFG_USE_WAITEXIT TRUE
+# endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_SEMAPHORES)
+# define CH_CFG_USE_SEMAPHORES TRUE
+# endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+# if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+# define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+# endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_MUTEXES)
+# define CH_CFG_USE_MUTEXES TRUE
+# endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+# if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+# define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+# endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+# if !defined(CH_CFG_USE_CONDVARS)
+# define CH_CFG_USE_CONDVARS TRUE
+# endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+# if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+# define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+# endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_EVENTS)
+# define CH_CFG_USE_EVENTS TRUE
+# endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+# if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+# define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+# endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_MESSAGES)
+# define CH_CFG_USE_MESSAGES TRUE
+# endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+# if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+# define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+# endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+# if !defined(CH_CFG_USE_MAILBOXES)
+# define CH_CFG_USE_MAILBOXES TRUE
+# endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_MEMCORE)
+# define CH_CFG_USE_MEMCORE TRUE
+# endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+# if !defined(CH_CFG_USE_HEAP)
+# define CH_CFG_USE_HEAP TRUE
+# endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_MEMPOOLS)
+# define CH_CFG_USE_MEMPOOLS TRUE
+# endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_OBJ_FIFOS)
+# define CH_CFG_USE_OBJ_FIFOS TRUE
+# endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+# if !defined(CH_CFG_USE_PIPES)
+# define CH_CFG_USE_PIPES TRUE
+# endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+# if !defined(CH_CFG_USE_DYNAMIC)
+# define CH_CFG_USE_DYNAMIC TRUE
+# endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+# if !defined(CH_CFG_USE_FACTORY)
+# define CH_CFG_USE_FACTORY TRUE
+# endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+# if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+# define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+# endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+# if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+# define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+# endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+# if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+# define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+# endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+# if !defined(CH_CFG_FACTORY_SEMAPHORES)
+# define CH_CFG_FACTORY_SEMAPHORES TRUE
+# endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+# if !defined(CH_CFG_FACTORY_MAILBOXES)
+# define CH_CFG_FACTORY_MAILBOXES TRUE
+# endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+# if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+# define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+# endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+# if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+# define CH_CFG_FACTORY_PIPES TRUE
+# endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+# if !defined(CH_DBG_STATISTICS)
+# define CH_DBG_STATISTICS FALSE
+# endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+# if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+# define CH_DBG_SYSTEM_STATE_CHECK TRUE
+# endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+# if !defined(CH_DBG_ENABLE_CHECKS)
+# define CH_DBG_ENABLE_CHECKS TRUE
+# endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+# if !defined(CH_DBG_ENABLE_ASSERTS)
+# define CH_DBG_ENABLE_ASSERTS TRUE
+# endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+# if !defined(CH_DBG_TRACE_MASK)
+# define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+# endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+# if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+# define CH_DBG_TRACE_BUFFER_SIZE 128
+# endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+# if !defined(CH_DBG_ENABLE_STACK_CHECK)
+# define CH_DBG_ENABLE_STACK_CHECK TRUE
+# endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+# if !defined(CH_DBG_FILL_THREADS)
+# define CH_DBG_FILL_THREADS TRUE
+# endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+# if !defined(CH_DBG_THREADS_PROFILING)
+# define CH_DBG_THREADS_PROFILING FALSE
+# endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+# define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+# define CH_CFG_SYSTEM_INIT_HOOK() \
+ { /* Add threads initialization code here.*/ }
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+# define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+# define CH_CFG_THREAD_INIT_HOOK(tp) \
+ { /* Add threads initialization code here.*/ }
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+# define CH_CFG_THREAD_EXIT_HOOK(tp) \
+ { /* Add threads finalization code here.*/ }
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+# define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \
+ { /* Context switch code here.*/ }
+
+/**
+ * @brief ISR enter hook.
+ */
+# define CH_CFG_IRQ_PROLOGUE_HOOK() \
+ { /* IRQ prologue code here.*/ }
+
+/**
+ * @brief ISR exit hook.
+ */
+# define CH_CFG_IRQ_EPILOGUE_HOOK() \
+ { /* IRQ epilogue code here.*/ }
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+# define CH_CFG_IDLE_ENTER_HOOK() \
+ { /* Idle-enter code here.*/ }
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+# define CH_CFG_IDLE_LEAVE_HOOK() \
+ { /* Idle-leave code here.*/ }
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+# define CH_CFG_IDLE_LOOP_HOOK() \
+ { /* Idle loop code here.*/ }
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+# define CH_CFG_SYSTEM_TICK_HOOK() \
+ { /* System tick event code here.*/ }
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+# define CH_CFG_SYSTEM_HALT_HOOK(reason) \
+ { /* System halt code here.*/ }
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+# define CH_CFG_TRACE_HOOK(tep) \
+ { /* Trace code here.*/ }
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/handwired/twadlee/tp69/config.h b/keyboards/handwired/twadlee/tp69/config.h
new file mode 100644
index 0000000000..4da7d25603
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/config.h
@@ -0,0 +1,253 @@
+/*
+Copyright 2020 Tracy Wadleigh
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xBEEF
+#define PRODUCT_ID 0xCACA
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Tracy Wadleigh
+#define PRODUCT tp69
+#define DESCRIPTION A custom 69-key 65% keyboard with a trackpoint under keycap
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ */
+/* 19 17 16 15 14 2 8 6 7 9 */
+#define MATRIX_ROW_PINS { B2, B1, B0, C0, D1, D0, D3, D4, D2, C3 }
+/* 20 21 18 0 1 3 4 5 */
+#define MATRIX_COL_PINS { D5, D6, A4, B16, B17, A1, A2, D7 }
+#define UNUSED_PINS
+
+/* for trackpoint: C1 (22) C2 (23) */
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+// #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/handwired/twadlee/tp69/halconf.h b/keyboards/handwired/twadlee/tp69/halconf.h
new file mode 100644
index 0000000000..908c75542c
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/halconf.h
@@ -0,0 +1,524 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+# define HALCONF_H
+
+# define _CHIBIOS_HAL_CONF_
+# define _CHIBIOS_HAL_CONF_VER_7_0_
+
+# include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+# define HAL_USE_PAL TRUE
+# endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+# define HAL_USE_ADC FALSE
+# endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+# define HAL_USE_CAN FALSE
+# endif
+
+/**
+ * @brief Enables the cryptographic subsystem.
+ */
+# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+# define HAL_USE_CRY FALSE
+# endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+# define HAL_USE_DAC FALSE
+# endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+# define HAL_USE_GPT FALSE
+# endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+# define HAL_USE_I2C FALSE
+# endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+# define HAL_USE_I2S FALSE
+# endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+# define HAL_USE_ICU FALSE
+# endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+# define HAL_USE_MAC FALSE
+# endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+# define HAL_USE_MMC_SPI FALSE
+# endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+# define HAL_USE_PWM FALSE
+# endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+# define HAL_USE_RTC FALSE
+# endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+# define HAL_USE_SDC FALSE
+# endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+# define HAL_USE_SERIAL FALSE
+# endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+# define HAL_USE_SERIAL_USB FALSE
+# endif
+
+/**
+ * @brief Enables the SIO subsystem.
+ */
+# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+# define HAL_USE_SIO FALSE
+# endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+# define HAL_USE_SPI FALSE
+# endif
+
+/**
+ * @brief Enables the TRNG subsystem.
+ */
+# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+# define HAL_USE_TRNG FALSE
+# endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+# if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+# define HAL_USE_UART FALSE
+# endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+# if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+# define HAL_USE_USB TRUE
+# endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+# define HAL_USE_WDG FALSE
+# endif
+
+/**
+ * @brief Enables the WSPI subsystem.
+ */
+# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+# define HAL_USE_WSPI FALSE
+# endif
+
+/*===========================================================================*/
+/* PAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+# define PAL_USE_CALLBACKS FALSE
+# endif
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+# define PAL_USE_WAIT FALSE
+# endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+# define ADC_USE_WAIT TRUE
+# endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+# define ADC_USE_MUTUAL_EXCLUSION TRUE
+# endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+# define CAN_USE_SLEEP_MODE TRUE
+# endif
+
+/**
+ * @brief Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+# define CAN_ENFORCE_USE_CALLBACKS FALSE
+# endif
+
+/*===========================================================================*/
+/* CRY driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ * implementation for algorithms not supported by the underlying
+ * hardware.
+ * @note Fall-back implementations may not be present for all algorithms.
+ */
+# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+# define HAL_CRY_USE_FALLBACK FALSE
+# endif
+
+/**
+ * @brief Makes the driver forcibly use the fall-back implementations.
+ */
+# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+# define HAL_CRY_ENFORCE_FALLBACK FALSE
+# endif
+
+/*===========================================================================*/
+/* DAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+# define DAC_USE_WAIT TRUE
+# endif
+
+/**
+ * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+# define DAC_USE_MUTUAL_EXCLUSION TRUE
+# endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+# define I2C_USE_MUTUAL_EXCLUSION TRUE
+# endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the zero-copy API.
+ */
+# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+# define MAC_USE_ZERO_COPY FALSE
+# endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+# define MAC_USE_EVENTS TRUE
+# endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+# define MMC_NICE_WAITING TRUE
+# endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+# define SDC_INIT_RETRY 100
+# endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+# define SDC_MMC_SUPPORT FALSE
+# endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+# define SDC_NICE_WAITING TRUE
+# endif
+
+/**
+ * @brief OCR initialization constant for V20 cards.
+ */
+# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+# define SDC_INIT_OCR_V20 0x50FF8000U
+# endif
+
+/**
+ * @brief OCR initialization constant for non-V20 cards.
+ */
+# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+# define SDC_INIT_OCR 0x80100000U
+# endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+# define SERIAL_DEFAULT_BITRATE 38400
+# endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+# define SERIAL_BUFFERS_SIZE 16
+# endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+# define SERIAL_USB_BUFFERS_SIZE 1
+# endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+# define SERIAL_USB_BUFFERS_NUMBER 2
+# endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+# define SPI_USE_WAIT TRUE
+# endif
+
+/**
+ * @brief Enables circular transfers APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+# define SPI_USE_CIRCULAR FALSE
+# endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+# define SPI_USE_MUTUAL_EXCLUSION TRUE
+# endif
+
+/**
+ * @brief Handling method for SPI CS line.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+# endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+# define UART_USE_WAIT FALSE
+# endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+# define UART_USE_MUTUAL_EXCLUSION FALSE
+# endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+# define USB_USE_WAIT TRUE
+# endif
+
+/*===========================================================================*/
+/* WSPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+# define WSPI_USE_WAIT TRUE
+# endif
+
+/**
+ * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+# define WSPI_USE_MUTUAL_EXCLUSION TRUE
+# endif
+
+#endif /* HALCONF_H */
+
+/** @} */
diff --git a/keyboards/handwired/twadlee/tp69/info.json b/keyboards/handwired/twadlee/tp69/info.json
new file mode 100644
index 0000000000..89eecb7d16
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/info.json
@@ -0,0 +1,12 @@
+{
+ "keyboard_name": "Twadlee TP69",
+ "url": "https://github.com/twadleigh/qmk_firmware",
+ "maintainer": "qmk",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3}, {"x":13.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2}, {"x":5.75, "y":4}, {"x":6.75, "y":4}, {"x":7.75, "y":4}, {"x":8.75, "y":4, "w":2.25}, {"x":11, "y":4, "w":1.25}, {"x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4, "w":1.25}, {"x":14.75, "y":4, "w":1.25}]
+ }
+ }
+}
diff --git a/keyboards/handwired/twadlee/tp69/keymaps/default/keymap.c b/keyboards/handwired/twadlee/tp69/keymaps/default/keymap.c
new file mode 100644
index 0000000000..f250c3fc62
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/keymaps/default/keymap.c
@@ -0,0 +1,28 @@
+/* Copyright 2020 Tracy Wadleigh
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names { _BASE };
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BASE] = LAYOUT(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_LGUI, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PGUP, KC_PGDN,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LALT, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL
+ )
+};
diff --git a/keyboards/handwired/twadlee/tp69/keymaps/default/readme.md b/keyboards/handwired/twadlee/tp69/keymaps/default/readme.md
new file mode 100644
index 0000000000..453673a6e9
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for tp69
diff --git a/keyboards/handwired/twadlee/tp69/mcuconf.h b/keyboards/handwired/twadlee/tp69/mcuconf.h
new file mode 100644
index 0000000000..dc4d00bf18
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/mcuconf.h
@@ -0,0 +1,45 @@
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY 96000000UL
+#define KINETIS_SYSCLK_FREQUENCY 48000000UL
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0 TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0 TRUE
+
+/* Need to redefine this, since the default (configured for K20x) might not apply
+ * 2 for Teensy LC
+ * 5 for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY 2
+
+#endif /* _MCUCONF_H_ */
diff --git a/keyboards/handwired/twadlee/tp69/readme.md b/keyboards/handwired/twadlee/tp69/readme.md
new file mode 100644
index 0000000000..201991cfe7
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/readme.md
@@ -0,0 +1,18 @@
+# Twadlee TP69
+
+![tp69](https://i.imgur.com/sC1qmJS.png)
+
+A 69-key keyboard having a Trackpoint unit under an additional 70th keycap.
+
+The layout is similar to a conventional 60% keyboard, but with additional 1u keys down a central split. The spacebar is also split, with the intervening space occupied by three mouse buttons and the left half replaced by a relocated `BACKSPACE` key. The right half of the spacebar is 2.25u. The space vacated by the `BACKSPACE` key is split into two additional 1u keys. The additional keycap on the home row does not cover a switch but a Trackpoint pointing device. All told, the 61 keycaps of the conventional 60% layout are augmented by an additional 9 1u keycaps, and a 2.25u keycap to replace the conventional 6.25u spacebar.
+
+Given the unconventional layout, only non-sculpted keycap profiles are practical. I use DSAs.
+
+* Keyboard Maintainer: [Tracy Wadleigh](https://github.com/twadleigh)
+* Hardware Supported: Teensy LC controller
+
+Make example for this keyboard (after setting up your build environment):
+
+ make handwired/twadlee/tp69:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/handwired/twadlee/tp69/rules.mk b/keyboards/handwired/twadlee/tp69/rules.mk
new file mode 100644
index 0000000000..967060802b
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/rules.mk
@@ -0,0 +1,28 @@
+# MCU name
+MCU = MKL26Z64
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs
+PS2_MOUSE_ENABLE = no
+
+USE_CHIBIOS_CONTRIB = yes
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/handwired/twadlee/tp69/tp69.c b/keyboards/handwired/twadlee/tp69/tp69.c
new file mode 100644
index 0000000000..f4454c3bda
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/tp69.c
@@ -0,0 +1,18 @@
+/* Copyright 2020 Tracy Wadleigh
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "tp69.h"
diff --git a/keyboards/handwired/twadlee/tp69/tp69.h b/keyboards/handwired/twadlee/tp69/tp69.h
new file mode 100644
index 0000000000..31c03eb70b
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/tp69.h
@@ -0,0 +1,48 @@
+/* Copyright 2020 Tracy Wadleigh
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \
+ k10, k11, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k66, k67, \
+ k20, k21, k23, k24, k25, k27, /**/ k70, k71, k72, k73, k74, k75, k77, \
+ k30, k32, k33, k34, k35, k36, k37, k81, k82, k83, k84, k85, k86, \
+ k40, k41, k43, k44, k46, k47, k91, k92, k94, k95, k96, k97 \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07}, \
+ { k10, k11, KC_NO, k13, k14, k15, k16, k17}, \
+ { k20, k21, KC_NO, k23, k24, k25, KC_NO, k27}, \
+ { k30, KC_NO, k32, k33, k34, k35, k36, k37}, \
+ { k40, k41, KC_NO, k43, k44, KC_NO, k46, k47}, \
+ { k50, k51, k52, k53, k54, k55, k56, k57}, \
+ { k60, k61, k62, k63, k64, k65, k66, k67}, \
+ { k70, k71, k72, k73, k74, k75, KC_NO, k77}, \
+ {KC_NO, k81, k82, k83, k84, k85, k86, KC_NO}, \
+ {KC_NO, k91, k92, KC_NO, k94, k95, k96, k97} \
+}
diff --git a/keyboards/handwired/twadlee/tp69/twadlee-tp69-kle.json b/keyboards/handwired/twadlee/tp69/twadlee-tp69-kle.json
new file mode 100644
index 0000000000..b54508bf4f
--- /dev/null
+++ b/keyboards/handwired/twadlee/tp69/twadlee-tp69-kle.json
@@ -0,0 +1,139 @@
+[
+ {
+ "backcolor": "",
+ "name": "65% keyboard with pointing device under keycap",
+ "author": "Tracy Wadleigh",
+ "plate": false
+ },
+ [
+ {
+ "a": 7,
+ "f": 5
+ },
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ ""
+ ],
+ [
+ {
+ "w": 1.5
+ },
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ {
+ "w": 1.5
+ },
+ ""
+ ],
+ [
+ {
+ "w": 1.75
+ },
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ {
+ "x": 1
+ },
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ {
+ "w": 2.25
+ },
+ ""
+ ],
+ [
+ {
+ "w": 2.25
+ },
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ {
+ "w": 2.75
+ },
+ ""
+ ],
+ [
+ {
+ "w": 1.25
+ },
+ "",
+ {
+ "w": 1.25
+ },
+ "",
+ {
+ "w": 1.25
+ },
+ "",
+ {
+ "w": 2
+ },
+ "",
+ "",
+ "",
+ "",
+ {
+ "w": 2.25
+ },
+ "",
+ {
+ "w": 1.25
+ },
+ "",
+ {
+ "w": 1.25
+ },
+ "",
+ {
+ "w": 1.25
+ },
+ "",
+ {
+ "w": 1.25
+ },
+ ""
+ ]
+] \ No newline at end of file