diff options
Diffstat (limited to 'keyboards/handwired/symmetric70_proto')
6 files changed, 7 insertions, 102 deletions
diff --git a/keyboards/handwired/symmetric70_proto/promicro/config.h b/keyboards/handwired/symmetric70_proto/promicro/config.h index caba8ebf6d..584161a9d3 100644 --- a/keyboards/handwired/symmetric70_proto/promicro/config.h +++ b/keyboards/handwired/symmetric70_proto/promicro/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -50,10 +49,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - //#define RGB_DI_PIN E2 //#ifdef RGB_DI_PIN //# define RGBLED_NUM 16 @@ -70,43 +65,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 //#endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -123,10 +86,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - #ifdef DEBUG_CONFIG # define MATRIX_DEBUG_PIN D3 # include "../debug_config.h" diff --git a/keyboards/handwired/symmetric70_proto/promicro/info.json b/keyboards/handwired/symmetric70_proto/promicro/info.json index 8ee579cd60..782e713bfe 100644 --- a/keyboards/handwired/symmetric70_proto/promicro/info.json +++ b/keyboards/handwired/symmetric70_proto/promicro/info.json @@ -1,3 +1,5 @@ { - "keyboard_name": "Symmetric70 prototype promicro" + "keyboard_name": "Symmetric70 prototype promicro", + "processor": "atmega32u4", + "bootloader": "caterina" } diff --git a/keyboards/handwired/symmetric70_proto/promicro/rules.mk b/keyboards/handwired/symmetric70_proto/promicro/rules.mk index fbe412faef..29f6808ed5 100644 --- a/keyboards/handwired/symmetric70_proto/promicro/rules.mk +++ b/keyboards/handwired/symmetric70_proto/promicro/rules.mk @@ -1,9 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - # Build Options # change yes to no to disable # diff --git a/keyboards/handwired/symmetric70_proto/proton_c/config.h b/keyboards/handwired/symmetric70_proto/proton_c/config.h index 2fe22de67f..8c5d5d7c7e 100644 --- a/keyboards/handwired/symmetric70_proto/proton_c/config.h +++ b/keyboards/handwired/symmetric70_proto/proton_c/config.h @@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -#include "config_common.h" /* key matrix size */ #define MATRIX_ROWS 5 @@ -53,15 +52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -//#define BACKLIGHT_PIN B7 -//#define BACKLIGHT_LEVELS 3 -//#define BACKLIGHT_BREATHING - //#define RGB_DI_PIN E2 //#ifdef RGB_DI_PIN //# define RGBLED_NUM 16 @@ -78,43 +68,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 //#endif -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -131,10 +89,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - #ifdef DEBUG_CONFIG # define MATRIX_DEBUG_PIN A9 # include "../debug_config.h" diff --git a/keyboards/handwired/symmetric70_proto/proton_c/info.json b/keyboards/handwired/symmetric70_proto/proton_c/info.json index a105f39be6..a6f017ae75 100644 --- a/keyboards/handwired/symmetric70_proto/proton_c/info.json +++ b/keyboards/handwired/symmetric70_proto/proton_c/info.json @@ -1,3 +1,6 @@ { - "keyboard_name": "Symmetric70 prototype proton-c" + "keyboard_name": "Symmetric70 prototype proton-c", + "processor": "STM32F303", + "bootloader": "stm32-dfu", + "board": "QMK_PROTON_C" } diff --git a/keyboards/handwired/symmetric70_proto/proton_c/rules.mk b/keyboards/handwired/symmetric70_proto/proton_c/rules.mk index 81d40223ea..29f6808ed5 100644 --- a/keyboards/handwired/symmetric70_proto/proton_c/rules.mk +++ b/keyboards/handwired/symmetric70_proto/proton_c/rules.mk @@ -1,10 +1,3 @@ -# MCU name -MCU = STM32F303 -BOARD = QMK_PROTON_C - -# Bootloader selection -BOOTLOADER = stm32-dfu - # Build Options # change yes to no to disable # |