2 files changed, 12 insertions, 23 deletions
diff --git a/keyboards/handwired/split89/config.h b/keyboards/handwired/split89/config.h
index 637326617c..042c165a18 100644
--- a/keyboards/handwired/split89/config.h
+++ b/keyboards/handwired/split89/config.h
@@ -16,31 +16,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-
-/* Left side matrix */
-#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { F5, F4, B5, B4, E6, D7, C6, D4, D2, D3 }
-/* Right side matrix */
-#define MATRIX_ROW_PINS_RIGHT { F6, F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS_RIGHT { F5, F4, B5, B4, E6, D7, C6, D4, D2, D3 }
-
 /* this will be tied to high (VCC with a 2k to 10k resistor) on the left keyboard half and tied to low (GND using a wire jumper only) on the right keyboard half.  This allows a user to plug in a USB cable to either side and function correctly with or without a TRS/TRRS cable with a single hex file. */
 #define SPLIT_HAND_PIN D1
 
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/handwired/split89/info.json b/keyboards/handwired/split89/info.json
index 2cc68544a7..719eb05455 100644
--- a/keyboards/handwired/split89/info.json
+++ b/keyboards/handwired/split89/info.json
@@ -8,8 +8,19 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "F4", "B5", "B4", "E6", "D7", "C6", "D4", "D2", "D3"],
+        "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
-        "soft_serial_pin": "D0"
+        "soft_serial_pin": "D0",
+        "matrix_pins": {
+            "right": {
+                "cols": ["F5", "F4", "B5", "B4", "E6", "D7", "C6", "D4", "D2", "D3"],
+                "rows": ["F6", "F7", "B1", "B3", "B2", "B6"]
+            }
+        }
     },
     "processor": "atmega32u4",
     "bootloader": "caterina",