diff options
Diffstat (limited to 'keyboards/handwired/macro3/readme.md')
| -rw-r--r-- | keyboards/handwired/macro3/readme.md | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/keyboards/handwired/macro3/readme.md b/keyboards/handwired/macro3/readme.md new file mode 100644 index 0000000000..185496ac8b --- /dev/null +++ b/keyboards/handwired/macro3/readme.md @@ -0,0 +1,26 @@ +# Macro3 + + + +Macro3 is a low-profile macro pad with dual encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr). + +## Keyboard Info + +* Keyboard Maintainer: [filterpaper](https://github.com/filterpaper) +* Hardware Supported: Macro3 +* Hardware Availability: [Open-source](https://github.com/davidphilipbarr/Macropads/tree/main/macro3) + +Make example for this keyboard (after setting up your build environment): + + make handwired/macro3:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top right key and plug in the controller. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured. +* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material. + |