summaryrefslogtreecommitdiff
path: root/keyboards/hadron
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/hadron')
-rw-r--r--keyboards/hadron/i2c.c166
-rw-r--r--keyboards/hadron/i2c.h46
-rw-r--r--keyboards/hadron/ver2/config.h6
-rw-r--r--keyboards/hadron/ver2/keymaps/default/keymap.c121
-rw-r--r--keyboards/hadron/ver2/keymaps/readme.md22
-rw-r--r--keyboards/hadron/ver2/keymaps/side_numpad/keymap.c162
-rw-r--r--keyboards/hadron/ver2/rules.mk32
-rw-r--r--keyboards/hadron/ver2/ver2.c64
-rw-r--r--keyboards/hadron/ver2/ver2.h2
-rw-r--r--keyboards/hadron/ver3/config.h12
-rw-r--r--keyboards/hadron/ver3/keymaps/default/config.h1
-rw-r--r--keyboards/hadron/ver3/keymaps/default/keymap.c4
-rw-r--r--keyboards/hadron/ver3/keymaps/readme.md24
-rw-r--r--keyboards/hadron/ver3/rules.mk4
-rw-r--r--keyboards/hadron/ver3/ver3.c222
15 files changed, 155 insertions, 733 deletions
diff --git a/keyboards/hadron/i2c.c b/keyboards/hadron/i2c.c
deleted file mode 100644
index cd2b835d50..0000000000
--- a/keyboards/hadron/i2c.c
+++ /dev/null
@@ -1,166 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
- uint16_t lim = 0;
- while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
- lim++;
-
- // easier way, but will wait slightly longer
- // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz
-void i2c_master_init(void) {
- // no prescaler
- TWSR = 0;
- // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
- // Check datasheets for more info.
- TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-// 1 => error
-uint8_t i2c_master_start(uint8_t address) {
- TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-
- i2c_delay();
-
- // check that we started successfully
- if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
- return 1;
-
- // send device address
- TWDR = address;
- TWCR = (1<<TWINT) | (1<<TWEN);
-
- i2c_delay();
-
- if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
- return 1; // slave did not acknowledge
- else
- return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
- uint16_t lim = 0;
- while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
- lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-// 1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
- TWDR = data;
- TWCR = (1<<TWINT) | (1<<TWEN);
-
- i2c_delay();
-
- // check if the slave acknowledged us
- return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
- i2c_delay();
- return TWDR;
-}
-
-void i2c_reset_state(void) {
- TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
- TWAR = address << 0; // slave i2c address
- // TWEN - twi enable
- // TWEA - enable address acknowledgement
- // TWINT - twi interrupt flag
- // TWIE - enable the twi interrupt
- TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
- uint8_t ack = 1;
- switch(TW_STATUS) {
- case TW_SR_SLA_ACK:
- // this device has been addressed as a slave receiver
- slave_has_register_set = false;
- break;
-
- case TW_SR_DATA_ACK:
- // this device has received data as a slave receiver
- // The first byte that we receive in this transaction sets the location
- // of the read/write location of the slaves memory that it exposes over
- // i2c. After that, bytes will be written at slave_buffer_pos, incrementing
- // slave_buffer_pos after each write.
- if(!slave_has_register_set) {
- slave_buffer_pos = TWDR;
- // don't acknowledge the master if this memory loctaion is out of bounds
- if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
- ack = 0;
- slave_buffer_pos = 0;
- }
- slave_has_register_set = true;
- } else {
- i2c_slave_buffer[slave_buffer_pos] = TWDR;
- BUFFER_POS_INC();
- }
- break;
-
- case TW_ST_SLA_ACK:
- case TW_ST_DATA_ACK:
- // master has addressed this device as a slave transmitter and is
- // requesting data.
- TWDR = i2c_slave_buffer[slave_buffer_pos];
- BUFFER_POS_INC();
- break;
-
- case TW_BUS_ERROR: // something went wrong, reset twi state
- TWCR = 0;
- default:
- break;
- }
- // Reset everything, so we are ready for the next TWI interrupt
- TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-
-
-
-#endif
diff --git a/keyboards/hadron/i2c.h b/keyboards/hadron/i2c.h
deleted file mode 100644
index 7ecf6eb278..0000000000
--- a/keyboards/hadron/i2c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency
-#define SCL_CLOCK 800000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
diff --git a/keyboards/hadron/ver2/config.h b/keyboards/hadron/ver2/config.h
index e051db209c..c992f7fe33 100644
--- a/keyboards/hadron/ver2/config.h
+++ b/keyboards/hadron/ver2/config.h
@@ -28,10 +28,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COL_PINS { F6, F7, D6, C7, F5, F4, F1, F0, D2, D3, D5, B3, B2, B1, B0 }
#define UNUSED_PINS
-
-#define USE_I2C
-#define SSD1306OLED
-#define OLED_ROTATE180
+// configure oled driver for the 128x32 oled
+#define OLED_UPDATE_INTERVAL 33 // ~30fps
/* ws2812 RGB LED*/
#define RGB_DI_PIN D4
diff --git a/keyboards/hadron/ver2/keymaps/default/keymap.c b/keyboards/hadron/ver2/keymaps/default/keymap.c
index 8e3d50d3d7..f24239aa22 100644
--- a/keyboards/hadron/ver2/keymaps/default/keymap.c
+++ b/keyboards/hadron/ver2/keymaps/default/keymap.c
@@ -1,10 +1,4 @@
#include QMK_KEYBOARD_H
-#ifdef USE_I2C
-#include "i2c.h"
-#endif
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-#endif
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
@@ -18,8 +12,8 @@ extern rgblight_config_t rgblight_config;
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
-#define _MOUSECURSOR 8
-#define _ADJUST 16
+#define _MOUSECURSOR 5
+#define _ADJUST 6
enum preonic_keycodes {
QWERTY = SAFE_RANGE,
@@ -307,115 +301,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
-//Functions for ver2
-#ifdef KEYBOARD_hadron_ver2
-#include <LUFA/Drivers/Peripheral/TWI.h>
void matrix_init_user(void) {
- #ifdef USE_I2C
- i2c_master_init();
- #ifdef SSD1306OLED
- // calls code for the SSD1306 OLED
- _delay_ms(400);
- TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
- iota_gfx_init(); // turns on the display
- #endif
- #endif
- #ifdef AUDIO_ENABLE
- startup_user();
- #endif
-}
-
-
-void matrix_scan_user(void) {
- #ifdef SSD1306OLED
- iota_gfx_task(); // this is what updates the display continuously
- #endif
-}
-
-void matrix_update(struct CharacterMatrix *dest,
- const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER 8
-#define L_RAISE 16
-#define L_FNLAYER 64
-#define L_NUMLAY 128
-#define L_NLOWER 136
-#define L_NFNLAYER 192
-#define L_MOUSECURSOR 256
-#define L_ADJUST 65560
-
-void iota_gfx_task_user(void) {
-#if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-#endif
-
- struct CharacterMatrix matrix;
-
- matrix_clear(&matrix);
- matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
- switch (USB_DeviceState) {
- case DEVICE_STATE_Unattached:
- matrix_write_P(&matrix, PSTR("Unattached"));
- break;
- case DEVICE_STATE_Suspended:
- matrix_write_P(&matrix, PSTR("Suspended"));
- break;
- case DEVICE_STATE_Configured:
- matrix_write_P(&matrix, PSTR("Connected"));
- break;
- case DEVICE_STATE_Powered:
- matrix_write_P(&matrix, PSTR("Powered"));
- break;
- case DEVICE_STATE_Default:
- matrix_write_P(&matrix, PSTR("Default"));
- break;
- case DEVICE_STATE_Addressed:
- matrix_write_P(&matrix, PSTR("Addressed"));
- break;
- default:
- matrix_write_P(&matrix, PSTR("Invalid"));
- }
+#ifdef AUDIO_ENABLE
+ startup_user();
#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
- char buf[40];
- snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
- matrix_write_P(&matrix, PSTR("\n\nLayer: "));
- switch (layer_state) {
- case L_BASE:
- matrix_write_P(&matrix, PSTR("Default"));
- break;
- case L_RAISE:
- matrix_write_P(&matrix, PSTR("Raise"));
- break;
- case L_LOWER:
- matrix_write_P(&matrix, PSTR("Lower"));
- break;
- case L_ADJUST:
- matrix_write_P(&matrix, PSTR("ADJUST"));
- break;
- default:
- matrix_write(&matrix, buf);
- }
-
- // Host Keyboard LED Status
- char led[40];
- snprintf(led, sizeof(led), "\n%s %s %s",
- (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
- (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
- (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
- matrix_write(&matrix, led);
- matrix_update(&display, &matrix);
}
-
-#endif
diff --git a/keyboards/hadron/ver2/keymaps/readme.md b/keyboards/hadron/ver2/keymaps/readme.md
deleted file mode 100644
index 2f7641d185..0000000000
--- a/keyboards/hadron/ver2/keymaps/readme.md
+++ /dev/null
@@ -1,22 +0,0 @@
-# How to add your own keymap
-
-Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
-
- _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
-
-\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
-
-and contain the following files:
-
-* `keymap.c`
-* `readme.md` *recommended*
-* `config.h` *optional*, found automatically when compiling
-* `Makefile` *optional*, found automatically when compling
-
-When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
-
- * **folder_name** description
-
-# List of Planck keymaps
-
-* **default** default Planck layout
diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
index c63ae93855..74f95b4b75 100644
--- a/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
+++ b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c
@@ -1,15 +1,4 @@
#include QMK_KEYBOARD_H
-#include <LUFA/Drivers/Peripheral/TWI.h>
-#ifdef AUDIO_ENABLE
- #include "audio.h"
-#endif
-#ifdef USE_I2C
-#include "i2c.h"
-#endif
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-#endif
-extern keymap_config_t keymap_config;
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
@@ -19,12 +8,12 @@ extern rgblight_config_t rgblight_config;
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
-#define _LOWER 3
-#define _RAISE 4
-#define _FNLAYER 6
-#define _NUMLAY 7
-#define _MOUSECURSOR 8
-#define _ADJUST 16
+#define _LOWER 1
+#define _RAISE 2
+#define _FNLAYER 3
+#define _NUMLAY 4
+#define _MOUSECURSOR 5
+#define _ADJUST 6
enum preonic_keycodes {
QWERTY = SAFE_RANGE,
@@ -41,10 +30,7 @@ enum preonic_keycodes {
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
-};
-
-enum macro_keycodes {
- KC_DEMOMACRO,
+ DEMOMACRO,
};
// Custom macros
@@ -57,7 +43,6 @@ enum macro_keycodes {
#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor
#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise
#define TG_NUMLAY TG(_NUMLAY) //Toggle for layer _NUMLAY
-#define DEMOMACRO M(KC_DEMOMACRO) // My login macros
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -322,29 +307,20 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
return false;
break;
+ case DEMOMACRO:
+ if (record->event.pressed) {
+ SEND_STRING("hello world");
+ }
+ return false;
+ break;
}
return true;
}
void matrix_init_user(void) {
- #ifdef USE_I2C
- i2c_master_init();
- #ifdef SSD1306OLED
- // calls code for the SSD1306 OLED
- _delay_ms(400);
- TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
- iota_gfx_init(); // turns on the display
- #endif
- #endif
- #ifdef AUDIO_ENABLE
- startup_user();
- #endif
-}
-
-void matrix_scan_user(void) {
- #ifdef SSD1306OLED
- iota_gfx_task(); // this is what updates the display continuously
- #endif
+#ifdef AUDIO_ENABLE
+ startup_user();
+#endif
}
#ifdef AUDIO_ENABLE
@@ -373,109 +349,3 @@ void music_scale_user(void)
}
#endif
-
-/*
- * Macro definition
- */
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- if (!eeconfig_is_enabled()) {
- eeconfig_init();
- }
-
- switch (id) {
- case KC_DEMOMACRO:
- if (record->event.pressed){
- return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END);
- }
- }
-
- return MACRO_NONE;
-}
-
-void matrix_update(struct CharacterMatrix *dest,
- const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER 8
-#define L_RAISE 16
-#define L_FNLAYER 64
-#define L_NUMLAY 128
-#define L_NLOWER 136
-#define L_NFNLAYER 192
-#define L_MOUSECURSOR 256
-#define L_ADJUST 65560
-
-void iota_gfx_task_user(void) {
-#if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-#endif
-
- struct CharacterMatrix matrix;
-
- matrix_clear(&matrix);
- matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
- switch (USB_DeviceState) {
- case DEVICE_STATE_Unattached:
- matrix_write_P(&matrix, PSTR("Unattached"));
- break;
- case DEVICE_STATE_Suspended:
- matrix_write_P(&matrix, PSTR("Suspended"));
- break;
- case DEVICE_STATE_Configured:
- matrix_write_P(&matrix, PSTR("Connected"));
- break;
- case DEVICE_STATE_Powered:
- matrix_write_P(&matrix, PSTR("Powered"));
- break;
- case DEVICE_STATE_Default:
- matrix_write_P(&matrix, PSTR("Default"));
- break;
- case DEVICE_STATE_Addressed:
- matrix_write_P(&matrix, PSTR("Addressed"));
- break;
- default:
- matrix_write_P(&matrix, PSTR("Invalid"));
- }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
- char buf[40];
- snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
- matrix_write_P(&matrix, PSTR("\n\nLayer: "));
- switch (layer_state) {
- case L_BASE:
- matrix_write_P(&matrix, PSTR("Default"));
- break;
- case L_RAISE:
- matrix_write_P(&matrix, PSTR("Raise"));
- break;
- case L_LOWER:
- matrix_write_P(&matrix, PSTR("Lower"));
- break;
- case L_ADJUST:
- matrix_write_P(&matrix, PSTR("ADJUST"));
- break;
- default:
- matrix_write(&matrix, buf);
- }
-
- // Host Keyboard LED Status
- char led[40];
- snprintf(led, sizeof(led), "\n%s %s %s",
- (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
- (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
- (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
- matrix_write(&matrix, led);
- matrix_update(&display, &matrix);
-}
diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk
index f2ec0e7b3f..79e5cccb5e 100644
--- a/keyboards/hadron/ver2/rules.mk
+++ b/keyboards/hadron/ver2/rules.mk
@@ -5,27 +5,19 @@ MCU = atmega32u4
BOOTLOADER = halfkay
# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
+# comment out to disable the options.
#
-BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-
+COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-
-EXTRAFLAGS += -flto
-
-
-SRC = i2c.c \
- ssd1306.c
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+AUDIO_ENABLE = no # Audio output
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight
+OLED_ENABLE = yes
+OLED_DRIVER = SSD1306
diff --git a/keyboards/hadron/ver2/ver2.c b/keyboards/hadron/ver2/ver2.c
index f00b4f26d6..ca13427497 100644
--- a/keyboards/hadron/ver2/ver2.c
+++ b/keyboards/hadron/ver2/ver2.c
@@ -1 +1,65 @@
#include "ver2.h"
+
+#ifdef OLED_ENABLE
+__attribute__ ((weak))
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ return OLED_ROTATION_180;
+}
+
+__attribute__ ((weak))
+void oled_task_user(void) {
+ oled_write_P(PSTR("LAYER "), false);
+ oled_write_char(get_highest_layer(layer_state) + 0x30, true);
+
+ led_t led_state = host_keyboard_led_state();
+ oled_set_cursor(18, 0);
+ oled_write_P(PSTR("NUM"), led_state.num_lock);
+ oled_set_cursor(18, 1);
+ oled_write_P(PSTR("CAP"), led_state.caps_lock);
+ oled_set_cursor(18, 2);
+ oled_write_P(PSTR("SCR"), led_state.scroll_lock);
+
+ uint8_t mod_state = get_mods();
+ oled_set_cursor(10, 3);
+ oled_write_P(PSTR("S"), mod_state & MOD_MASK_SHIFT);
+ oled_advance_char();
+ oled_write_P(PSTR("C"), mod_state & MOD_MASK_CTRL);
+ oled_advance_char();
+ oled_write_P(PSTR("A"), mod_state & MOD_MASK_ALT);
+ oled_advance_char();
+ oled_write_P(PSTR("G"), mod_state & MOD_MASK_GUI);
+ oled_advance_char();
+
+/* Matrix display is 12 x 12 pixels */
+#define MATRIX_DISPLAY_X 5
+#define MATRIX_DISPLAY_Y 18
+
+ // matrix
+ for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ for (uint8_t y = 0; y < MATRIX_COLS; y++) {
+ bool on = (matrix_get_row(x) & (1 << y)) > 0;
+ oled_write_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2, on);
+ }
+ }
+
+ // outline
+ for (uint8_t x = 0; x < 19; x++) {
+ oled_write_pixel(MATRIX_DISPLAY_X + x, MATRIX_DISPLAY_Y, true);
+ oled_write_pixel(MATRIX_DISPLAY_X + x, MATRIX_DISPLAY_Y + 9, true);
+ }
+ for (uint8_t y = 0; y < 9; y++) {
+ oled_write_pixel(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y+y, true);
+ oled_write_pixel(MATRIX_DISPLAY_X + 19, MATRIX_DISPLAY_Y+y, true);
+ }
+
+ // oled location
+ for (uint8_t x = 0; x < 3; x++) {
+ oled_write_pixel(MATRIX_DISPLAY_X + 14 + x, MATRIX_DISPLAY_Y + 2, true);
+ }
+
+ // bodge for layer number left hand side
+ for (uint8_t y = 0; y < 8; y++) {
+ oled_write_pixel(35, 0 + y, true);
+ }
+}
+#endif
diff --git a/keyboards/hadron/ver2/ver2.h b/keyboards/hadron/ver2/ver2.h
index e7577d2684..8127b497f7 100644
--- a/keyboards/hadron/ver2/ver2.h
+++ b/keyboards/hadron/ver2/ver2.h
@@ -1,3 +1,3 @@
#pragma once
-#include "../hadron.h"
+#include "hadron.h"
diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h
index 87d01726f5..54fab6662d 100644
--- a/keyboards/hadron/ver3/config.h
+++ b/keyboards/hadron/ver3/config.h
@@ -69,16 +69,8 @@
#define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
#endif
-//configure qwiic micro_oled driver for the 128x32 oled
-#ifdef QWIIC_MICRO_OLED_ENABLE
-
-#undef I2C_ADDRESS_SA0_1
-#define I2C_ADDRESS_SA0_1 0b0111100
-#define LCDWIDTH 128
-#define LCDHEIGHT 32
-#define micro_oled_rotate_180
-
-#endif
+// configure oled driver for the 128x32 oled
+#define OLED_UPDATE_INTERVAL 33 // ~30fps
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
// #define DEBOUNCE 6
diff --git a/keyboards/hadron/ver3/keymaps/default/config.h b/keyboards/hadron/ver3/keymaps/default/config.h
deleted file mode 100644
index 6f70f09bee..0000000000
--- a/keyboards/hadron/ver3/keymaps/default/config.h
+++ /dev/null
@@ -1 +0,0 @@
-#pragma once
diff --git a/keyboards/hadron/ver3/keymaps/default/keymap.c b/keyboards/hadron/ver3/keymaps/default/keymap.c
index cec43e95d4..b897ffcab1 100644
--- a/keyboards/hadron/ver3/keymaps/default/keymap.c
+++ b/keyboards/hadron/ver3/keymaps/default/keymap.c
@@ -9,8 +9,8 @@
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
-#define _MOUSECURSOR 8
-#define _ADJUST 16
+#define _MOUSECURSOR 5
+#define _ADJUST 6
enum preonic_keycodes {
QWERTY = SAFE_RANGE,
diff --git a/keyboards/hadron/ver3/keymaps/readme.md b/keyboards/hadron/ver3/keymaps/readme.md
deleted file mode 100644
index 66bf06b711..0000000000
--- a/keyboards/hadron/ver3/keymaps/readme.md
+++ /dev/null
@@ -1,24 +0,0 @@
-# How to add your own keymap
-
-Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`:
-
- _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author]
-
-\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements
-
-and contain the following files:
-
-* `keymap.c`
-* `readme.md` *recommended*
-* `config.h` *optional*, found automatically when compiling
-* `Makefile` *optional*, found automatically when compling
-
-When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
-
- * **folder_name** description
-
-# List of Hadron keymaps
-
-* **default** default Hadron layout
-* **ishtob** ishtob's Hadron layout
-* **sebaslayout** sebaslayout's Hadron layout \ No newline at end of file
diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk
index f3cc14b17d..ad753a5ff1 100644
--- a/keyboards/hadron/ver3/rules.mk
+++ b/keyboards/hadron/ver3/rules.mk
@@ -22,6 +22,6 @@ RGBLIGHT_ENABLE = yes
RGB_MATRIX_ENABLE = no # once arm_rgb is implemented
RGB_MATRIX_DRIVER = WS2812
HAPTIC_ENABLE += DRV2605L
-QWIIC_ENABLE = yes
-QWIIC_DRIVERS += MICRO_OLED
+OLED_ENABLE = yes
+OLED_DRIVER = SSD1306
ENCODER_ENABLER = yes
diff --git a/keyboards/hadron/ver3/ver3.c b/keyboards/hadron/ver3/ver3.c
index 0664bf4b0e..7eabe58558 100644
--- a/keyboards/hadron/ver3/ver3.c
+++ b/keyboards/hadron/ver3/ver3.c
@@ -14,9 +14,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ver3.h"
-#include "qwiic.h"
-#include "action_layer.h"
-#include "haptic.h"
#ifdef RGB_MATRIX_ENABLE
@@ -36,185 +33,66 @@ led_config_t g_led_config = { {
#endif
-uint8_t *o_fb;
-
-uint16_t counterst = 0;
-
-
-
-#ifdef QWIIC_MICRO_OLED_ENABLE
-
-/* screen off after this many milliseconds */
-#include "timer.h"
-#define ScreenOffInterval 60000 /* milliseconds */
-static uint16_t last_flush;
-
-volatile uint8_t led_numlock = false;
-volatile uint8_t led_capslock = false;
-volatile uint8_t led_scrolllock = false;
-
-static uint8_t layer;
-static bool queue_for_send = false;
-static uint8_t encoder_value = 32;
-
+#ifdef OLED_ENABLE
__attribute__ ((weak))
-void draw_ui(void) {
- clear_buffer();
- last_flush = timer_read();
- send_command(DISPLAYON);
-
-/* Layer indicator is 41 x 10 pixels */
-#define LAYER_INDICATOR_X 5
-#define LAYER_INDICATOR_Y 0
-
- draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0);
- draw_rect_filled_soft(LAYER_INDICATOR_X + 32, LAYER_INDICATOR_Y + 1, 9, 9, PIXEL_ON, NORM);
- draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0);
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ return OLED_ROTATION_180;
+}
-/* Matrix display is 19 x 9 pixels */
+__attribute__ ((weak))
+void oled_task_user(void) {
+ oled_write_P(PSTR("LAYER "), false);
+ oled_write_char(get_highest_layer(layer_state) + 0x30, true);
+
+ led_t led_state = host_keyboard_led_state();
+ oled_set_cursor(18, 0);
+ oled_write_P(PSTR("NUM"), led_state.num_lock);
+ oled_set_cursor(18, 1);
+ oled_write_P(PSTR("CAP"), led_state.caps_lock);
+ oled_set_cursor(18, 2);
+ oled_write_P(PSTR("SCR"), led_state.scroll_lock);
+
+ uint8_t mod_state = get_mods();
+ oled_set_cursor(10, 3);
+ oled_write_P(PSTR("S"), mod_state & MOD_MASK_SHIFT);
+ oled_advance_char();
+ oled_write_P(PSTR("C"), mod_state & MOD_MASK_CTRL);
+ oled_advance_char();
+ oled_write_P(PSTR("A"), mod_state & MOD_MASK_ALT);
+ oled_advance_char();
+ oled_write_P(PSTR("G"), mod_state & MOD_MASK_GUI);
+ oled_advance_char();
+
+/* Matrix display is 12 x 12 pixels */
#define MATRIX_DISPLAY_X 5
#define MATRIX_DISPLAY_Y 18
- for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
- for (uint8_t y = 0; y < MATRIX_COLS; y++) {
- draw_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM);
+ // matrix
+ for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ for (uint8_t y = 0; y < MATRIX_COLS; y++) {
+ bool on = (matrix_get_row(x) & (1 << y)) > 0;
+ oled_write_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2, on);
+ }
}
- }
- draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19, 9, PIXEL_ON, NORM);
- /* hadron oled location on thumbnail */
- draw_rect_filled_soft(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3, 1, PIXEL_ON, NORM);
-/*
- draw_rect_soft(0, 13, 64, 6, PIXEL_ON, NORM);
- draw_line_vert(encoder_value, 13, 6, PIXEL_ON, NORM);
-
-*/
-
-/* Mod display is 41 x 16 pixels */
-#define MOD_DISPLAY_X 30
-#define MOD_DISPLAY_Y 18
-
- uint8_t mods = get_mods();
- if (mods & MOD_LSFT) {
- draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
- draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0);
- } else {
- draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0);
- }
- if (mods & MOD_LCTL) {
- draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
- draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0);
- } else {
- draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0);
- }
- if (mods & MOD_LALT) {
- draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
- draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0);
- } else {
- draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0);
- }
- if (mods & MOD_LGUI) {
- draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM);
- draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0);
- } else {
- draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0);
- }
-
-/* Lock display is 23 x 32 */
-#define LOCK_DISPLAY_X 100
-#define LOCK_DISPLAY_Y 0
-
- if (led_numlock == true) {
- draw_rect_filled_soft(LOCK_DISPLAY_X, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM);
- draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_OFF, NORM, 0);
- } else if (led_numlock == false) {
- draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 1, "NUM", PIXEL_ON, NORM, 0);
- }
- if (led_capslock == true) {
- draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM);
- draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_OFF, NORM, 0);
- } else if (led_capslock == false) {
- draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "CAP", PIXEL_ON, NORM, 0);
- }
- if (led_scrolllock == true) {
- draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 22, 5 + (3 * 6), 9, PIXEL_ON, NORM);
- draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_OFF, NORM, 0);
- } else if (led_scrolllock == false) {
- draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 22 +1, "SCR", PIXEL_ON, NORM, 0);
- }
- send_buffer();
-}
-
-void read_host_led_state(void) {
- uint8_t leds = host_keyboard_leds();
- if (leds & (1 << USB_LED_NUM_LOCK)) {
- if (led_numlock == false){
- led_numlock = true;}
- } else {
- if (led_numlock == true){
- led_numlock = false;}
- }
- if (leds & (1 << USB_LED_CAPS_LOCK)) {
- if (led_capslock == false){
- led_capslock = true;}
- } else {
- if (led_capslock == true){
- led_capslock = false;}
+ // outline
+ for (uint8_t x = 0; x < 19; x++) {
+ oled_write_pixel(MATRIX_DISPLAY_X + x, MATRIX_DISPLAY_Y, true);
+ oled_write_pixel(MATRIX_DISPLAY_X + x, MATRIX_DISPLAY_Y + 9, true);
}
- if (leds & (1 << USB_LED_SCROLL_LOCK)) {
- if (led_scrolllock == false){
- led_scrolllock = true;}
- } else {
- if (led_scrolllock == true){
- led_scrolllock = false;}
+ for (uint8_t y = 0; y < 9; y++) {
+ oled_write_pixel(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y+y, true);
+ oled_write_pixel(MATRIX_DISPLAY_X + 19, MATRIX_DISPLAY_Y+y, true);
}
-}
-
-uint32_t layer_state_set_kb(uint32_t state) {
- state = layer_state_set_user(state);
- layer = biton32(state);
- queue_for_send = true;
- return state;
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- queue_for_send = true;
- return process_record_user(keycode, record);
-}
-
-bool encoder_update_user(uint8_t index, bool clockwise);
-bool encoder_update_kb(uint8_t index, bool clockwise) {
- if (!encoder_update_user(index, clockwise)) return false;
- encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64;
- queue_for_send = true;
- return true;
-}
-
-#endif
+ // oled location
+ for (uint8_t x = 0; x < 3; x++) {
+ oled_write_pixel(MATRIX_DISPLAY_X + 14 + x, MATRIX_DISPLAY_Y + 2, true);
+ }
-void matrix_init_kb(void) {
- queue_for_send = true;
- matrix_init_user();
+ // bodge for layer number left hand side
+ for (uint8_t y = 0; y < 8; y++) {
+ oled_write_pixel(35, 0 + y, true);
+ }
}
-
-void matrix_scan_kb(void) {
-if (queue_for_send) {
-#ifdef QWIIC_MICRO_OLED_ENABLE
- read_host_led_state();
- draw_ui();
#endif
- queue_for_send = false;
- }
-#ifdef QWIIC_MICRO_OLED_ENABLE
- if (timer_elapsed(last_flush) > ScreenOffInterval) {
- send_command(DISPLAYOFF); /* 0xAE */
- }
-#endif
- if (counterst == 0) {
- //testPatternFB(o_fb);
- }
- counterst = (counterst + 1) % 1024;
- //rgblight_task();
- matrix_scan_user();
-}