summaryrefslogtreecommitdiff
path: root/keyboards/glenpickle/chimera_ortho_plus
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/glenpickle/chimera_ortho_plus')
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/chimera_ortho_plus.c18
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/chimera_ortho_plus.h38
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/config.h58
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/info.json62
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/keymaps/default/config.h5
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/keymaps/default/keymap.c185
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/matrix.c65
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/readme.md15
-rw-r--r--keyboards/glenpickle/chimera_ortho_plus/rules.mk24
9 files changed, 470 insertions, 0 deletions
diff --git a/keyboards/glenpickle/chimera_ortho_plus/chimera_ortho_plus.c b/keyboards/glenpickle/chimera_ortho_plus/chimera_ortho_plus.c
new file mode 100644
index 0000000000..6d87ed7053
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/chimera_ortho_plus.c
@@ -0,0 +1,18 @@
+#include "chimera_ortho_plus.h"
+
+void led_init(void) {
+ setPinOutput(D1);
+ setPinOutput(F4);
+ setPinOutput(F5);
+ writePinHigh(D1);
+ writePinHigh(F4);
+ writePinHigh(F5);
+}
+
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init();
+}
diff --git a/keyboards/glenpickle/chimera_ortho_plus/chimera_ortho_plus.h b/keyboards/glenpickle/chimera_ortho_plus/chimera_ortho_plus.h
new file mode 100644
index 0000000000..f75dc61057
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/chimera_ortho_plus.h
@@ -0,0 +1,38 @@
+#pragma once
+
+#include "quantum.h"
+
+#define red_led_off PORTF |= (1<<5)
+#define red_led_on PORTF &= ~(1<<5)
+#define blu_led_off PORTF |= (1<<4)
+#define blu_led_on PORTF &= ~(1<<4)
+#define grn_led_off PORTD |= (1<<1)
+#define grn_led_on PORTD &= ~(1<<1)
+
+#define set_led_off red_led_off; grn_led_off; blu_led_off
+#define set_led_red red_led_on; grn_led_off; blu_led_off
+#define set_led_blue red_led_off; grn_led_off; blu_led_on
+#define set_led_green red_led_off; grn_led_on; blu_led_off
+#define set_led_yellow red_led_on; grn_led_on; blu_led_off
+#define set_led_magenta red_led_on; grn_led_off; blu_led_on
+#define set_led_cyan red_led_off; grn_led_on; blu_led_on
+#define set_led_white red_led_on; grn_led_on; blu_led_on
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
+ k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
+ k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
+ k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
+ k48, k49, k50, k51 \
+) \
+{ \
+ { k03, k40, k26, k15, k28, k01, k42, k31, k20, k33, k08, k10 }, \
+ { k00, k37, k14, k27, k16, k36, k47, k19, k32, k21, k46, k11 }, \
+ { k12, k25, k02, k39, k17, k49, k50, k18, k44, k09, k34, k23 }, \
+ { k24, k13, k38, k04, k05, k48, k51, k06, k07, k45, k22, k35 }, \
+ { k29, k41, KC_NO, KC_NO, KC_NO, KC_NO, k30, k43, KC_NO, KC_NO, KC_NO, KC_NO } \
+}
diff --git a/keyboards/glenpickle/chimera_ortho_plus/config.h b/keyboards/glenpickle/chimera_ortho_plus/config.h
new file mode 100644
index 0000000000..ebffb85657
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/config.h
@@ -0,0 +1,58 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xDE1D
+#define DEVICE_VER 0x0001
+#define MANUFACTURER unknown
+#define PRODUCT Chimera Ortho Plus
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/glenpickle/chimera_ortho_plus/info.json b/keyboards/glenpickle/chimera_ortho_plus/info.json
new file mode 100644
index 0000000000..29a2c2a634
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/info.json
@@ -0,0 +1,62 @@
+{
+ "keyboard_name": "Chimera Ortho Plus",
+ "maintainer": "qmk",
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label": "{", "x": 0, "y": 0},
+ {"label": "1", "x": 1, "y": 0},
+ {"label": "2", "x": 2, "y": 0},
+ {"label": "3", "x": 3, "y": 0},
+ {"label": "4", "x": 4, "y": 0},
+ {"label": "5", "x": 5, "y": 0},
+ {"label": "6", "x": 7.5, "y": 0},
+ {"label": "7", "x": 8.5, "y": 0},
+ {"label": "8", "x": 9.5, "y": 0},
+ {"label": "9", "x": 10.5, "y": 0},
+ {"label": "0", "x": 11.5, "y": 0},
+ {"label": "}", "x": 12.5, "y": 0},
+ {"label": "Esc", "x": 0, "y": 1},
+ {"label": "Q", "x": 1, "y": 1},
+ {"label": "W", "x": 2, "y": 1},
+ {"label": "E", "x": 3, "y": 1},
+ {"label": "R", "x": 4, "y": 1},
+ {"label": "T", "x": 5, "y": 1},
+ {"label": "Y", "x": 7.5, "y": 1},
+ {"label": "U", "x": 8.5, "y": 1},
+ {"label": "I", "x": 9.5, "y": 1},
+ {"label": "O", "x": 10.5, "y": 1},
+ {"label": "P", "x": 11.5, "y": 1},
+ {"label": "\"", "x": 12.5, "y": 1},
+ {"label": "Tab", "x": 0, "y": 2},
+ {"label": "A", "x": 1, "y": 2},
+ {"label": "S", "x": 2, "y": 2},
+ {"label": "D", "x": 3, "y": 2},
+ {"label": "F", "x": 4, "y": 2},
+ {"label": "G", "x": 5, "y": 2},
+ {"label": "H", "x": 7.5, "y": 2},
+ {"label": "J", "x": 8.5, "y": 2},
+ {"label": "K", "x": 9.5, "y": 2},
+ {"label": "L", "x": 10.5, "y": 2},
+ {"label": ";", "x": 11.5, "y": 2},
+ {"label": "Enter", "x": 12.5, "y": 2},
+ {"label": "(", "x": 0, "y": 3},
+ {"label": "Z", "x": 1, "y": 3},
+ {"label": "X", "x": 2, "y": 3},
+ {"label": "C", "x": 3, "y": 3},
+ {"label": "V", "x": 4, "y": 3},
+ {"label": "B", "x": 5, "y": 3},
+ {"label": "N", "x": 7.5, "y": 3},
+ {"label": "M", "x": 8.5, "y": 3},
+ {"label": ",", "x": 9.5, "y": 3},
+ {"label": ".", "x": 10.5, "y": 3},
+ {"label": "/", "x": 11.5, "y": 3},
+ {"label": ")", "x": 12.5, "y": 3},
+ {"label": "Num Layer", "x": 4, "y": 4},
+ {"label": "Back Space", "x": 5, "y": 4},
+ {"label": "Space", "x": 7.5, "y": 4},
+ {"label": "Symbol Layer", "x": 8.5, "y": 4}
+ ]
+ }
+ }
+}
diff --git a/keyboards/glenpickle/chimera_ortho_plus/keymaps/default/config.h b/keyboards/glenpickle/chimera_ortho_plus/keymaps/default/config.h
new file mode 100644
index 0000000000..bdfd4db80f
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/keymaps/default/config.h
@@ -0,0 +1,5 @@
+#pragma once
+
+// place overrides here
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300
diff --git a/keyboards/glenpickle/chimera_ortho_plus/keymaps/default/keymap.c b/keyboards/glenpickle/chimera_ortho_plus/keymaps/default/keymap.c
new file mode 100644
index 0000000000..9b45037701
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/keymaps/default/keymap.c
@@ -0,0 +1,185 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum chimera_ortho_plus_layers {
+ _QWERTY,
+ _CAPS,
+ _NUMPAD,
+ _SYMBOLS,
+ _MACROS,
+ _NAV
+};
+
+#define KC_NMPD TG(_NUMPAD)
+#define KC_SYMB TG(_SYMBOLS)
+#define KC_SPFN LT(_NAV,KC_4)
+#define KC_SCTL MT(MOD_LCTL, KC_2)
+#define KC_SCTR MT(MOD_LCTL, KC_9)
+#define KC_SPLT MT(MOD_LALT, KC_3)
+#define KC_SPRT MT(MOD_LALT, KC_8)
+#define KC_GBRC MT(MOD_RGUI, KC_7)
+#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
+#define KC_MESC LT(_MACROS, KC_ESC)
+#define KC_CAD LALT(LCTL(KC_DEL))
+
+enum custom_keycodes {
+ KC_INCL = SAFE_RANGE,
+ KC_PULL,
+ KC_PUSH,
+ KC_SCAP,
+ KC_SCOF
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = LAYOUT(
+ //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
+ KC_LBRC, KC_1 ,KC_SCTL,KC_SPLT,KC_SPFN, KC_5 , KC_6 ,KC_GBRC,KC_SPRT,KC_SCTR, KC_0 ,KC_RBRC,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_MESC, KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_QUOT,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_ENT ,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_LSPO, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSPC,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_NMPD,KC_BSPC, KC_SPC ,KC_SYMB
+ //|-------------------------------+-------+-------| |-------+-------+-------------------------------|
+ ),
+
+ [_CAPS] = LAYOUT(
+ //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
+ _______,KC_UNDS,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,KC_COLN,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_SCOF,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_SCOF,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______, _______,_______
+ //|-------------------------------+-------+-------| |-------+-------+-------------------------------|
+ ),
+
+ [_NUMPAD] = LAYOUT(
+ //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
+ _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,KC_MINS,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,KC_COLN,_______,_______,_______, _______, KC_7 , KC_8 , KC_9 ,KC_ASTR,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,KC_DOT ,_______,_______,_______, _______, KC_4 , KC_5 , KC_6 ,KC_PLUS,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,_______,_______,_______,_______, _______, KC_1 , KC_2 , KC_3 ,KC_SLSH,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______, _______, KC_0
+ //|-------------------------------+-------+-------/ |-------+-------+-------------------------------|
+ ),
+
+ [_SYMBOLS] = LAYOUT(
+ //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
+ _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSLS,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_TILD,KC_EQL ,KC_UNDS,KC_LCBR,KC_RCBR,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , KC_GRV ,KC_PLUS,KC_MINS,KC_LBRC,KC_RBRC,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_PIPE,_______, _______,_______
+ //|-------------------------------+-------+-------| |-------+-------+-------------------------------|
+ ),
+
+ [_MACROS] = LAYOUT(
+ //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
+ _______,_______,_______,_______,_______,_______, _______ ,_______,_______,_______,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,_______,_______,_______,_______, _______ ,_______,KC_INCL,_______,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,_______,KC_CAD ,_______,_______, _______ ,_______,_______,_______,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ KC_SCAP,_______,_______,_______,_______,_______, _______ ,_______,KC_PULL,KC_PUSH,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______, _______,_______
+ //|-------------------------------+-------+-------| |-------+-------+-------------------------------|
+ ),
+
+ [_NAV] = LAYOUT(
+ //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
+ _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,_______,_______,_______,_______, _______,KC_PGUP, KC_UP ,KC_PGDN,KC_PSCR,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,_______,_______,_______,_______, _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
+ //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
+ _______,KC_DEL , _______,_______
+ //|-------------------------------+-------+-------| |-------+-------+-------------------------------|
+ )
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch(keycode) {
+ /* include some kind of library or header */
+ case KC_INCL:
+ if (record->event.pressed) {
+ SEND_STRING("#include <>" SS_TAP(X_LEFT));
+ }
+ return false;
+ case KC_PULL:
+ if (record->event.pressed) {
+ SEND_STRING("git pull\n");
+ }
+ return false;
+ case KC_PUSH:
+ if (record->event.pressed){
+ SEND_STRING("git push\n");
+ }
+ return false;
+ case KC_SCAP:
+ if (record->event.pressed){
+ layer_on(_CAPS);
+ tap_code(KC_CAPS);
+ }
+ return false;
+ case KC_SCOF:
+ if (record->event.pressed){
+ layer_off(_CAPS);
+ tap_code(KC_CAPS);
+ }
+ return false;
+ }
+ return true;
+};
+
+
+void matrix_scan_user(void) {
+ uint8_t layer = get_highest_layer(layer_state);
+
+ switch (layer) {
+ case _QWERTY:
+ set_led_green;
+ break;
+ case _CAPS:
+ set_led_white;
+ break;
+ case _NUMPAD:
+ set_led_blue;
+ break;
+ case _SYMBOLS:
+ set_led_red;
+ break;
+ case _MACROS:
+ set_led_cyan;
+ break;
+ case _NAV:
+ set_led_magenta;
+ break;
+ default:
+ set_led_green;
+ break;
+ }
+};
diff --git a/keyboards/glenpickle/chimera_ortho_plus/matrix.c b/keyboards/glenpickle/chimera_ortho_plus/matrix.c
new file mode 100644
index 0000000000..603ad0f386
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/matrix.c
@@ -0,0 +1,65 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
+
+void matrix_init_custom(void) {
+ uart_init(1000000);
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+ uint32_t timeout = 0;
+ bool changed = false;
+
+ //the s character requests the RF slave to send the matrix
+ uart_write('s');
+
+ //trust the external keystates entirely, erase the last data
+ uint8_t uart_data[14] = {0};
+
+ //there are 10 bytes corresponding to 10 columns, and an end byte
+ for (uint8_t i = 0; i < 14; i++) {
+ //wait for the serial data, timeout if it's been too long
+ //this only happened in testing with a loose wire, but does no
+ //harm to leave it in here
+ while (!uart_available()) {
+ timeout++;
+ if (timeout > 10000) {
+ break;
+ }
+ }
+ uart_data[i] = uart_read();
+ }
+
+ //check for the end packet, the key state bytes use the LSBs, so 0xE0
+ //will only show up here if the correct bytes were recieved
+ if (uart_data[10] == 0xE0) {
+ //shifting and transferring the keystates to the QMK matrix variable
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
+ }
+ }
+
+ return changed;
+}
diff --git a/keyboards/glenpickle/chimera_ortho_plus/readme.md b/keyboards/glenpickle/chimera_ortho_plus/readme.md
new file mode 100644
index 0000000000..259e982832
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/readme.md
@@ -0,0 +1,15 @@
+# Chimera Ortho+
+
+![Chimera Ortho+](https://i.imgur.com/tuDaGdTl.jpg)
+
+A split wireless 50% ortholinear keyboard.
+
+* Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
+* Hardware Supported: Chimera Ortho+ PCB, WaveShare core nRF51822
+* Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ortho_plus/gerbers)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make glenpickle/chimera_ortho_plus:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/glenpickle/chimera_ortho_plus/rules.mk b/keyboards/glenpickle/chimera_ortho_plus/rules.mk
new file mode 100644
index 0000000000..0a8a31e7dd
--- /dev/null
+++ b/keyboards/glenpickle/chimera_ortho_plus/rules.mk
@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+UNICODE_ENABLE = yes
+CUSTOM_MATRIX = lite
+
+# project specific files
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c