3 files changed, 5 insertions, 60 deletions
diff --git a/keyboards/giabalanai/config.h b/keyboards/giabalanai/config.h
index 7f7751897f..a24f802ff0 100644
--- a/keyboards/giabalanai/config.h
+++ b/keyboards/giabalanai/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 12
-#define MATRIX_COLS 10
 
 /*
  * Keyboard Matrix Assignments
@@ -41,10 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D2
 #define SELECT_SOFT_SERIAL_SPEED 1
 /*Sets the protocol speed when using serial communication*/
 //Speeds:
@@ -61,10 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // for "Generic" Promicro to be detected correctly as lefthand side (slave)
 #define SPLIT_USB_DETECT
 
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 
@@ -183,43 +170,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #endif  // RGB_MATRIX_ENABLE
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-// /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-// /* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -236,10 +186,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
 /* Audio */
 #ifdef AUDIO_ENABLE
 #   define AUDIO_PIN B5  // use EX1 = PB5 = PIN9 as Audio output
diff --git a/keyboards/giabalanai/info.json b/keyboards/giabalanai/info.json
index b0b52b4ab8..05c0e67fdf 100644
--- a/keyboards/giabalanai/info.json
+++ b/keyboards/giabalanai/info.json
@@ -8,6 +8,11 @@
         "pid": "0xF4B0",
         "device_version": "0.0.1"
     },
+    "split": {
+        "soft_serial_pin": "D2"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
           "layout": [
diff --git a/keyboards/giabalanai/rules.mk b/keyboards/giabalanai/rules.mk
index b642aa9aa3..b676b1da46 100644
--- a/keyboards/giabalanai/rules.mk
+++ b/keyboards/giabalanai/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #